Database Info

Feiteng H7100 Bricked

Hello,
I managed to brick my new Feiteng H7100 phone, i flashed wrong rom to it and got a greenish screen when trying to start the phone.
So i formatted the phone in SPFT tool "Format whole flash" and from then it stopped responding, i cant start the phone anymore, and the charging indicator wont light up when charging.
When connecting the phone to try and reflash it the computer recognizes that i have connected the phone to the computer, but flashing doesnt work.
It is the S7180 with 1GB ram.
I hope there is a solution to it and it can be fixed, iam not sure if this can be called had brick or soft brick.
Was very close to throw it out of the window yesterday, but then thought i can give it a chance
Thanks

Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks

Mine is dead also
jemmars said:
Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks
Click to expand...
Click to collapse
Same mine is completely dead after I flash it - Its not recognized by the originally drivers in windows 7. Showing up as an Unknown Device.

if it is showing up as an device, it isn`t bricked. you need to get the right firmware and flash it again. force install the drivers for the unknown device or take the drivers for Rom you flashed. (e.g. flashed wrong preloader from ZTE to a Star device, need to install ZTE drivers)

While I don't know the specifics of the Feiteng H7100, I've "bricked" many an android phone and tablet. Fortunately it's usually easy to fix.
1) Reboot the device into CWM Recovery Mode (usually by holding power and volume buttons at the same time)
2) Plug it into your computer & run "adb devices" - if you device comes up as a Recovery device, then you're probably home free
3) Run an "adb push newly_downloaded_cyanogenmod_rom.zip /sdcard/" - the data location (/sdcard/ in this example) might vary depending on your device
4) Wipe Cache
5) Install Zip from sdcard and choose your new_rom.zip

[Q] *Help[4.4.2]Rooted Succesfully and then made a mistake[No os]

Ok so first off just wanted to say that i succesfullt rooted my Moto g 4.4.2.. Had SuperSu and all was fantastic...a day went by and i decided that i wanted to put run CMrom .. i was having a few issues so i decided that i would clear the dalvik and all that.
But this is where i messed up.. i wasnt paying attention and Deleted EVERYTHING..including the os.
Now im at a loss because my computer wont recognize my device ..even if im in fastboot or recovery.. i cant get it to show up in adb when i type adb devices or anything! So how can i flash an os when my device isnt recognized??.. There is 1 thing, When im in fastboot and i click the Superboot.bat it acts like it did when i first rooted it... but does me no good i still cant do anything... and yes ive read every guide i could find but i just cant get it recognized... Is there something im missing?
I appreciate any help with this as i am now without a phone... Thanks guys
Edit: Oh and just incase i forgot to mention i believe i have all the drivers and adb..all that...Like i said i rooted succesfully

With the phone in fastboot mode and connected to your computer, do you get the device's serial # when you type "fastboot devices" ?

audit13 said:
With the phone in fastboot mode and connected to your computer, do you get the device's serial # when you type "fastboot devices" ?
Click to expand...
Click to collapse
nope, i tried to get it to show up in every mode and way i could come up with.. nothing

Are you trying the fastboot commands on a Win7 or XP machine? I don't think ADB commands will not work when the phone is in fastboot mode,

It's a Windows 8 machine.
Any suggestions I'm still stuck

Try to flash a ROM in fastboot on a Win7 (x86 or x64) or XP (x86) machine.

Just tried it man... Still no luck. . Man what am I doing here? Do you have a link maybe I'm doing it wrong from the one I'm reading... But the machines just will not get the device

Put your phone into fastboot mode, connect the USB cable, do you see the Moto G appear as an android device in Device Manager on your Win7 or XP machine?

Delphi Hacker said:
Ok so first off just wanted to say that i succesfullt rooted my Moto g 4.4.2.. Had SuperSu and all was fantastic...a day went by and i decided that i wanted to put run CMrom .. i was having a few issues so i decided that i would clear the dalvik and all that.
But this is where i messed up.. i wasnt paying attention and Deleted EVERYTHING..including the os.
Now im at a loss because my computer wont recognize my device ..even if im in fastboot or recovery.. i cant get it to show up in adb when i type adb devices or anything! So how can i flash an os when my device isnt recognized??.. There is 1 thing, When im in fastboot and i click the Superboot.bat it acts like it did when i first rooted it... but does me no good i still cant do anything... and yes ive read every guide i could find but i just cant get it recognized... Is there something im missing?
I appreciate any help with this as i am now without a phone... Thanks guys
Edit: Oh and just incase i forgot to mention i believe i have all the drivers and adb..all that...Like i said i rooted succesfully
Click to expand...
Click to collapse
I think you need to restore your stock rom
This thread will help u
http://forum.xda-developers.com/showthread.php?t=2542219

no my device is not recognized no matt r what I do​

After booting your phone in fastboot mode and connecting it to a Win7 or XP machine, you see no unknown devices in Device Manager?

Do you have pds partition since you cleared everything.
"fastboot devices" does this command shows any device or your device recognized by pc or not.
This may be useful - http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798

but how can i flash the stock firmware when its not recognized?

[Completed] [Q] soft bricked my phone. how do i fix it?

well i scrwred my phone , did a factory reset, wiped cache, and messing about like an idiot did some messing wiht the mount /unmounting. obviosuly deleted some important system files. now its stuck in bootloop. it just stays on the logo. MY phone is huawei g620s L01 was running kitkat 4.4.4. i have cwm recovery on it. i have unlocked the bootloader. i have installed all the drivers for my device on windows. i can get into fastboot or recovery. i have downloaded a stock rom but when i type command adb sideload "nameofrom620s.zip" it starts but finishes saying install aborted/??? no explanation ...so i am really stuck, any ideas. i know it connects becasue when i type fastboot dvices, it lists a device number. when i type adb devices a few lines come up one of which is the device number and says recovery. Please can u help? is there some other software i need like a flashing tool or odin(ihave never used odin and know nothingn= about it). I should also mention that although it connects via adb/fastboot, when i check devices in windows, its not listed!? PLEASE please can someone show me the way forward? thanks.

Hi, thank you for using XDA assist. I've found this which may help you get your phone working again, http://forum.xda-developers.com/android/help/restoring-broken-huawei-smartphones-t3047748

No response. Thread closed.

wrong boot img flashed. Now phone stuck in bootloop and won't be detected by PC

Hi guys,
Before i start, just be informed that i have tried google all possible solutions and tried them but to no avail. I know its a long shot but perhaps someone may be able to help however small the chances are.
My phone is a Xiaomi Redmi Note 3 Snapdragon variant and is rooted.
What happened was, i tried installing TWRP (kenzo version) on my phone and so following the "instructions" in the downloaded file.
I used Flashify to flash the boot.img and then redmi_note_3_Twrp.img then the phone prompted me to reboot.
Now my phone is stuck in bootloop. The only thing i can do is to boot into Fastboot. So i tried accessing fastboot via ADB hoping to be able to some how flash the original boot.img back.
The problem i have now is that i am unable to access the phone at all even though i can go into fastboot. It wont be detected by my PC. I tried Minimal ADB and Fastboot and PdaNet.
Is there any other way for me to detect my phone and run some form of command to get it started again? Any help at all is appreciated. The phone is fairly new and i'm regretting trying to get the latest ROM for it.
I'm hoping i'll have some luck in a helpful community such as this.
Thanks guys.

Omg!! someone with the same problem as me. The same happened to me. Flashed a CWM file now am stuck in a Bootloop and ADB wont find my device either

Marticco said:
Omg!! someone with the same problem as me. The same happened to me. Flashed a CWM file now am stuck in a Bootloop and ADB wont find my device either
Click to expand...
Click to collapse
Fret not my friend. For i have found the solution and managed to unbrick my phone. Thank the good guys at MIUI for this.
Head over to the MIUI forum and search unbrick under the Redmi Note 3 forums. I can't post the link here unfortunately
You can also thank me after you unbrick your phone.
This only applies if you are uaing the Redmi Note 3 Pro

yea unfortunately i dont use that phone. I have a Lava Iris x1 Grand (Lollipop). I am still trying to get ADB find my device

Marticco said:
yea unfortunately i dont use that phone. I have a Lava Iris x1 Grand (Lollipop). I am still trying to get ADB find my device
Click to expand...
Click to collapse
Well if that's the case i suggest googling how to get into EDM mode for ur phone and using your phone brand's flash tool to flash a new ROM onto your phone. This means you will not be able to save your phone's memory. Is your phone's bootloader unlocked?

willetan said:
Well if that's the case i suggest googling how to get into EDM mode for ur phone and using your phone brand's flash tool to flash a new ROM onto your phone. This means you will not be able to save your phone's memory. Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
yes it is unlocked,
i think? When i entered fastboot mode. One of my apps says bootloader enabled and when i typed 'fastboot devices' in the Minimal ADB and Fastboot its shows:
0123456789ABCDEF devices
whereas if I type 'adb devices' i just shows:
List of devices attached
The main problem is the driver, i cant get adb to find my device. I have tried the universal usb drivers like Kouch but no success. My device is listed in the Unspecified section in my computer

[Completed] How to install ROM on Vonino Pluri Q8 tablet ?

Hi there,
Today i've received this tablet. All good and dandy until it notified me it has an update so obviously i've gone and do the update. Surprise.. after reboot, update installment and so on the device won't boot anymore at all, and recover mode doesn't work to enter.
I've found official ROM package on their site:
ftp.vonino.org/public/Firmware/Vonino_Tablets/Pluri%20Q8/Orange%20Version/Android%206.0/
Tablet can connect to the PC, but it isn't recognized because "some drivers" missing. How can i install this ROM on the tablet from my pc ?
Thank you.

Hi,
I can't find anything about it on xda or anywhere. You'll need to contact the manufacturer for drivers and instructions on flashing their firmware.
Good luck!

After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.

denede said:
After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.
Click to expand...
Click to collapse
Typically, on devices I know of, it's fastboot that you would use to flash factory images. So you should be good there. But again, I don't know if that is how your device works too. And it would also typically not matter what's been altered on your device, system wise, you would simply flash the appropriate images with fastboot.
So I'd still say you need to determine the correct procedure to flash the files you got from their site. Perhaps there site has instructions? Or a support number for help of its not working as it should?

I've talked with the support. They gave me a link with an official ROM, a different one that the one that was from the site. But they didn't even told how to use it, LOL.
Have the damn files and don't know what to do with them, OMG.
I've placed the zip archive on SD card and tried to use the option from rescue mode with 'update via sd card". The zip archive is visible but after i select it says Installation aborted :|
I've googled around and maybe my tablet needs to be at over 50% power... but it was plugged into the wall it should've worked.
edit: 100% and no good...
edit2: they sent me another e-mail with a pdf file in which it is explained how to flash their device.