[Q] Bricked tab 2 10.1! - Galaxy Tab 2 Q&A, Help & Troubleshooting

So. I have finished installing live dmesg lite and then I rebooted. My screen started flashing. I went into recovery mode and did a factory reset. Altough, it still flashed, plus. its stuck on the install screen and its ins panish and i cant do anything.

ok
bump

Reinstall rom
Sent from my LG-P690b using Tapatalk 2

Didn't work
I tried to reinstall android, I did everything frm recovery mode. IT DOESN'T JUST WORK.

onlyherebecausebrickedtab said:
I tried to reinstall android, I did everything frm recovery mode. IT DOESN'T JUST WORK.
Click to expand...
Click to collapse
Restore to stock and redo it

...
I restored to stock BEFORE i installed a new android. Gosh, why doesn't anyone understand anything

onlyherebecausebrickedtab said:
I restored to stock BEFORE i installed a new android. Gosh, why doesn't anyone understand anything
Click to expand...
Click to collapse
give me every step you did and i will help the op does not give ANY kind of helpful info for you !!

Related

[Q] NEED HELP WITH XPERIA X10 keeps rebooting!

Hey guys i had my phone rooted and with xRecovery and all of the good stuff and with like wolfpacks old Rom, I wanted to reformat my phone and make it clean again with at&t 2.1 firmware after i tried doing it on PC companion... it keep rebooting and rebooting and at first i though it was just installing the update, but now it is just rebooting when the logo pops up it restarts again need help! any ideas?
bennygod said:
Hey guys i had my phone rooted and with xRecovery and all of the good stuff and with like wolfpacks old Rom, I wanted to reformat my phone and make it clean again with at&t 2.1 firmware after i tried doing it on PC companion... it keep rebooting and rebooting and at first i though it was just installing the update, but now it is just rebooting when the logo pops up it restarts again need help! any ideas?
Click to expand...
Click to collapse
For me it is the same happening after flashing wolfs 2.3 rom, I am trying to reflash with 2.1rom with flash tool but USB debugging is unticked and rom keeps rebooting so what to do then? xrecovery says "Can't mount SD card"...
reloadedx10 said:
For me it is the same happening after flashing wolfs 2.3 rom, I am trying to reflash with 2.1rom with flash tool but USB debugging is unticked and rom keeps rebooting so what to do then? xrecovery says "Can't mount SD card"...
Click to expand...
Click to collapse
GUYS. theres official 2.3.3 out now.
consider trying that.
bennygod said:
Hey guys i had my phone rooted and with xRecovery and all of the good stuff and with like wolfpacks old Rom, I wanted to reformat my phone and make it clean again with at&t 2.1 firmware after i tried doing it on PC companion... it keep rebooting and rebooting and at first i though it was just installing the update, but now it is just rebooting when the logo pops up it restarts again need help! any ideas?
Click to expand...
Click to collapse
You must have installed some mod that made the phone crash when doing something... Which FW do you want to have?
The best I tried from 2.3.3 was from Wolf...
I tried "update service" but it says "you already have the latest software", on xrecovery i wiped dalvik catche ant etc. but it is still thesame, is there way how to fully wipe previuos rom in phone? now I am really confused, I am thinking to bring phone to some phone service company to fix it...
reloadedx10 said:
I tried "update service" but it says "you already have the latest software", on xrecovery i wiped dalvik catche ant etc. but it is still thesame, is there way how to fully wipe previuos rom in phone? now I am really confused, I am thinking to bring phone to some phone service company to fix it...
Click to expand...
Click to collapse
I don't know xrecovery. but there should be an FORMAT SYSTEM option.
it deletes\removes\kills\whatever the old rom and all its files. do that and try to reflash with the newest updater.
You must use xrecovery to install the ROM again or use superoneclick to flash it again. You cant fix without doing this.
Sent from my Xperia X10 using XDA Premium
bennygod said:
Hey guys i had my phone rooted and with xRecovery and all of the good stuff and with like wolfpacks old Rom, I wanted to reformat my phone and make it clean again with at&t 2.1 firmware after i tried doing it on PC companion... it keep rebooting and rebooting and at first i though it was just installing the update, but now it is just rebooting when the logo pops up it restarts again need help! any ideas?
Click to expand...
Click to collapse
Mine is also doing this. I just bought phone and it was still new in the box. I took to at n t and turned on and later in the day i went to update and it updated and has been doing this ever since. I got the links to here from a friend so i'm all new at this but very quick in learning. I have read in other posts that when it goes from 2.1 to 2.3 and you DONT delete user data it will do this..is this all that has happened to mine? I have the flash tool and files on desktop already. Ive also rooted and tried flashing the other day it kept coming up a security and bunch a greek to me...im sure all the answers are here but to a new guy this stuff is little confusing..after reading more today i asume im missing the recovery tool and the bootloader needs unlocked is this whats stopping the flashing? now after geting busy box and while it was installing it looped and now its just constant looping...im tryiny to read all this but you guys but all the ifs, ands. buts in here its too damn confusing...guess im off to amatuer flashing local i dont know what else to do...
Reflash Kernel!
bennygod said:
Hey guys i had my phone rooted and with xRecovery and all of the good stuff and with like wolfpacks old Rom, I wanted to reformat my phone and make it clean again with at&t 2.1 firmware after i tried doing it on PC companion... it keep rebooting and rebooting and at first i though it was just installing the update, but now it is just rebooting when the logo pops up it restarts again need help! any ideas?
Click to expand...
Click to collapse
I think that the Kernel isn't compatible anymore!
Reflash the original Kernel and the old ROM of your Xperia with flashtool!
It's a very simple and awesome tool for our beloved Xperia!
If you have any problems with the flashing, you can PM me
Good Luck
The_Mighty_Muffin
either your phone is bricked or you flashed the wrong kernel.

[Q] Nexus S keep's restarting itself.

Good day all, I recently got a Nexus S for free from my brother becuase it keep's restarting its self. The phone was rooted with Cyanogen rom, and from what he told me has been dropped a couple of times. With this all being said, he went ahead and flashed a fresh rom on there (unk which one) and wiped everything etc.. Anyone exp this type of problem before and if so what can be done to fix it?
King350z said:
Good day all, I recently got a Nexus S for free from my brother becuase it keep's restarting its self. The phone was rooted with Cyanogen rom, and from what he told me has been dropped a couple of times. With this all being said, he went ahead and flashed a fresh rom on there (unk which one) and wiped everything etc.. Anyone exp this type of problem before and if so what can be done to fix it?
Click to expand...
Click to collapse
Lol I think you over clocked it on the minimum ... try the minimum at 800m ... or if anything flash a new rom.. its probably the rom itself
Sent From In between Your Moms Boobies
Try another (stable) rom? (no development rom)
Wipe everything.
And yes, probably its underclocked/overclocked too high.
I would like to flash a rom but once I turn it on it keeps force closing everything and I am unable to do anything on the phone, It boots into recovery mode just fine though
Sent from my HTC Vision using XDA App
King350z said:
I would like to flash a rom but once I turn it on it keeps force closing everything and I am unable to do anything on the phone, It boots into recovery mode just fine though
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Good news, you flash your ROM from recovery. Download the package, boot into recovery. Mount the SD card and push or push using adb push. Flash the zip from CWM.
my friend purchased the phone yesterday and he is on the latest Official version (2.3.6) and the phone keeps rebooting!!!
is this normal?? there must a problem!
3mar84 said:
my friend purchased the phone yesterday and he is on the latest Official version (2.3.6) and the phone keeps rebooting!!!
is this normal?? there must a problem!
Click to expand...
Click to collapse
Wipe data/factory reset from recovery if it's a used phone.
If he just bought it return it... thats easy
If he rooted it and changed the rom -- put it back to stock or put a new rom on it
I personally found that most of my restarts were due to me trying to pull the stock launcher into an unfamiliar rom. Make sure (if you are using Titanium backup) to only load apps not system *unless you are trying to go back to the same rom*
good luck
First check if he overclocked too much or underclocked too much. Put it to normal.
Alternatively you can just flash another rom. Before flashing remember to wipe everything
Goodluck!

[Resolved] [Q] I've made a mess of my Nexus S...

Hey guys,
This is my very first post, just to let you all know, so please have some patience! Thanks!
Anyway, so I have a Nexus S 3G (Canada) and I have rooted it, unrooted it, installed roms and everything. I works...for the most part. It's giving me all sorts of different little errors and what not. So I was wondering, how can I COMPLETLY start ALL OVER, as in, factory new, like when you buy a new phone (without the carrier stuff). I wanted to start fresh, fresh out-of-the-oven kind of start, do you understand what I mean? FACTORY FRESH. Thank you all so much in advance!
well download your phone's stock rom and of course unroot it.Regarding the stock bloatware you can modify the custom rom by going in system/app and deleting the apps you dont want to be installed
[email protected] said:
well download your phone's stock rom and of course unroot it.Regarding the stock bloatware you can modify the custom rom by going in system/app and deleting the apps you dont want to be installed
Click to expand...
Click to collapse
Thanks for the reply, I've already done that, and I'm still getting errors and other weird things, like not going out of airplane mode, failing to download the OTA 2.3.6 Update (I'm on stock 2.3.1 unrooted, I think), and I don't know if this is normal, but ClockworkMod Recovery is still there. Am I still rooted or something? Plus, when I try to flash a restore, from let's say Gingerbread 2.3.6 Stock, it says MD5 mismatch! How about if it's an ICS AOSP Build, it gives me the normal white Google logo like normal, but then just stays stuck there.
Is the anyway to erase EVERYTHING and start over like NOTHING was ever done to the device? Like when they are first distributing the the device and no one has ever touched it? Is there anyway to do just that?
There is a difference between being "rooted" and using a rooted ROM. You could be using a non-rooted ROM, and your phone can still be "rooted". The first step in rooting a phone is changing SECURITY-ON to SECURITY-OFF. If you REALLY want to go back to when you first got the device, you will need to find a way to turn SECURITY from OFF to ON. When it is off, you are able to access the bootloader, in turn allowing you to install a recovery to install a ROM with rooted permissions. I think the best way to go back to stock would be for you to first download the latest OTA update for your device, do a FULL WIPE of everything on your phone thru recovery (data, system, cache, dalvik cache). Then installing the latest OTA. I do not think however, that this is how you turn your device S-ON.
I hope I've been of some help.
Sent from my Incredible 2 using xda premium
lodxcol said:
There is a difference between being "rooted" and using a rooted ROM. You could be using a non-rooted ROM, and your phone can still be "rooted". The first step in rooting a phone is changing SECURITY-ON to SECURITY-OFF. If you REALLY want to go back to when you first got the device, you will need to find a way to turn SECURITY from OFF to ON. When it is off, you are able to access the bootloader, in turn allowing you to install a recovery to install a ROM with rooted permissions. I think the best way to go back to stock would be for you to first download the latest OTA update for your device, do a FULL WIPE of everything on your phone thru recovery (data, system, cache, dalvik cache). Then installing the latest OTA. I do not think however, that this is how you turn your device S-ON.
I hope I've been of some help.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
Thanks for your excellent reply, but I have also already done that, EXACTLY that, multiple times too. Dalvik, battery stats, factory reset/delete all user data, wipe cache partition and fix permissions. What else is there left to do?
Thank you all so very much!!!!
I have fixed my Nexus S!!!
HeroKhar said:
I have fixed my Nexus S!!!
Click to expand...
Click to collapse
how did you fix it?
lodxcol said:
how did you fix it?
Click to expand...
Click to collapse
I reinstalled the newest update with the vanilla recovery
Sent from my Xoom using XDA Premium HD app

[Q] Odin Restore Not Working?

Hey guys I'm trying to restore my phone to stock to give to my little brother and everything seems to run fine, but the phone stays on the boot animation forever, and I'm not sure what to do. I've tried different versions of odin, updating kies drivers, dling stock from different sites. Any help?
cmglol said:
Hey guys I'm trying to restore my phone to stock to give to my little brother and everything seems to run fine, but the phone stays on the boot animation forever, and I'm not sure what to do. I've tried different versions of odin, updating kies drivers, dling stock from different sites. Any help?
Click to expand...
Click to collapse
.......boot into stock recovery and wipe everything. Should be fine after that
Sent from my SGH-I727 using Tapatalk 2
yeah it happens all the time. Wiping and rebooting should do the trick.
Thanks guys it worked perfectly!
Sent from my SGH-T999 using xda app-developers app

HTC Evo Loading issues

Ok I have read eveywhere and searched google for it but can't find a solution. Ok the problem is that I am having booting problems. My phone boots up most of the way but right before rom completely loads the only thing the shows is top tool (signal & time) and the walpaper nothing else loads up and it just there cant do anythin not even shut it off only way to shut it off is to pull battery. This problem occurs when I do factory reset or data reset or when I restore from nandroid. I have no idea wat cause this problem and i have never had this problem its jst started and its fustrating as hell. If anyone can help please i appreciate it.
Hapened to me once and a clean install with a RUU helped after that
Sent from my LG-E510 using Tapatalk 2
gesange said:
Hapened to me once and a clean install with a RUU helped after that
Sent from my LG-E510 using Tapatalk 2
Click to expand...
Click to collapse
what about a clean install of the factory rom complete stock rom from sprint. u think this will help
paulwall816 said:
what about a clean install of the factory rom complete stock rom from sprint. u think this will help
Click to expand...
Click to collapse
ok where do i find a bone stock rom for my htc evo 4g with stock recovery and unroot phone so I can start from scratch.

Categories

Resources