Hi,
today I'm going to show how to create a flashable
zip from a CWM/TWRP Backup. This is specially for MTK
device(you can try in other device,may work). Here is
my step by step tutorial...
Requirements:
* PC
* CWM/TWRP Backup
* Winrar
* Brain
you need META-INF,system & boot.img for making a
flashble zip rom, so you have to collect these from
your backup
*CWM method:
1. Copy the CWM backup from Phone to PC
2. Extract system.ext4.tar file with winrar, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom which is made for your device
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done.
TWRP method:
1. Copy the TWRP backup from Phone to PC
2. Collect the file 'system.ext4.win' rename it
to 'system.ext4.tar'
3. Extract the system.ext4.tar. Now in case if your
TWRP backup is not in compression method, you will
directly get the system folder. Or if your TWRP
backup is in compression method, you will get a
file named 'system.ext4', don't worry just again
rename it to 'system.ext4.tar' and extract to get
the 'system' folder
4. Collect the 'boot.emmc.win' file and rename it
to boot.img, now ypu manage the boot.img also
5. Now collect a META-INF folder from any custom
rom which is made for your device
6. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
7. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
8. Done.
akash_bd said:
Hi,
today I'm going to show how to create a flashable
zip from a CWM/TWRP Backup. This is specially for MTK
device(you can try in other device,may work). Here is
my step by step tutorial...
Requirements:
* PC
* CWM/TWRP Backup
* Winrar
* Brain
you need META-INF,system & boot.img for making a
flashble zip rom, so you have to collect these from
your backup
*CWM method:
1. Copy the CWM backup from Phone to PC
2. Extract system.ext4.tar file with winrar, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom which is made for your device
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done.
TWRP method:
1. Copy the TWRP backup from Phone to PC
2. Collect the file 'system.ext4.win' rename it
to 'system.ext4.tar'
3. Extract the system.ext4.tar. Now in case if your
TWRP backup is not in compression method, you will
directly get the system folder. Or if your TWRP
backup is in compression method, you will get a
file named 'system.ext4', don't worry just again
rename it to 'system.ext4.tar' and extract to get
the 'system' folder
4. Collect the 'boot.emmc.win' file and rename it
to boot.img, now ypu manage the boot.img also
5. Now collect a META-INF folder from any custom
rom which is made for your device
6. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
7. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
8. Done.
Click to expand...
Click to collapse
where is thanks button
This is awesome. Thanks for the easy tutorial. What about adding the cache and data segments as well? How would we go about doing that with the twrp backup? Thanks!
What if my TWRP backup folder got 2 system.ext4.win files?
system.ext4.win000
system.ext4.win001
What should i do to combine these 2 files into single .tar ?
You are 1 bright mutha effa
Dude,
You are the brightest Mutha Effa Ever. Thanks for sharing that; Good Thinking dude.
CYGWIN Unpacking TWRP Backup Files
limcs79 said:
What if my TWRP backup folder got 2 system.ext4.win files?
system.ext4.win000
system.ext4.win001
What should i do to combine these 2 files into single .tar ?
Click to expand...
Click to collapse
This is for Latest TWRP used with safestrap (my phone is AT&T Note 3)
rename them both seperatly
system.ext4.win000.tar
system.ext4.win001.tar
winrar and 7-zip failed for me
I used CYGWIN
CYGWIN Unpacking TWRP Backup Files
akash_bd said:
Hi,
today I'm going to show how to create a flashable
zip from a CWM/TWRP Backup. This is specially for MTK
device(you can try in other device,may work). Here is
my step by step tutorial...
Requirements:
* PC
* CWM/TWRP Backup
* Winrar
* Brain
you need META-INF,system & boot.img for making a
flashble zip rom, so you have to collect these from
your backup
*CWM method:
1. Copy the CWM backup from Phone to PC
2. Extract system.ext4.tar file with winrar, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom which is made for your device
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done.
TWRP method:
1. Copy the TWRP backup from Phone to PC
2. Collect the file 'system.ext4.win' rename it
to 'system.ext4.tar'
3. Extract the system.ext4.tar. Now in case if your
TWRP backup is not in compression method, you will
directly get the system folder. Or if your TWRP
backup is in compression method, you will get a
file named 'system.ext4', don't worry just again
rename it to 'system.ext4.tar' and extract to get
the 'system' folder
4. Collect the 'boot.emmc.win' file and rename it
to boot.img, now ypu manage the boot.img also
5. Now collect a META-INF folder from any custom
rom which is made for your device
6. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
7. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
8. Done.
Click to expand...
Click to collapse
Thanks for your thread
Just 1 question: i have see multiple flashable zip on XDA, and they have a diffrents compression level, so how decide it?
Thank you for such a simple and amazing tutorial
Great tutorial
[my phone iz better than urz]
I want to make KK Stock ROM for iBall Slide 3G 7271 HD70
Hi,
Regarding the 4th step, Their are no ROM available for this device so I don't have the files.
I have the block MAP for the device,
So could u plz guide me to make the meta files?
"4. Now collect a META-INF folder from any custom rom which is made for your device"
babai93 said:
Hi,
Regarding the 4th step, Their are no ROM available for this device so I don't have the files.
I have the block MAP for the device,
So could u plz guide me to make the meta files?
"4. Now collect a META-INF folder from any custom rom which is made for your device"
Click to expand...
Click to collapse
What version is your phone
These are the files i have.. Is UBOOT.img is necessary?
boot.img
cache.ext4
data.ext4
nandroid.md5
recovery.txt
system.ext4
uboot.img
Click to expand...
Click to collapse
akash_bd said:
Hi,
today I'm going to show how to create a flashable
zip from a CWM/TWRP Backup. This is specially for MTK
device(you can try in other device,may work). Here is
my step by step tutorial...
Requirements:
* PC
* CWM/TWRP Backup
* Winrar
* Brain
you need META-INF,system & boot.img for making a
flashble zip rom, so you have to collect these from
your backup
*CWM method:
1. Copy the CWM backup from Phone to PC
2. Extract system.ext4.tar file with winrar, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom which is made for your device
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done.
TWRP method:
1. Copy the TWRP backup from Phone to PC
2. Collect the file 'system.ext4.win' rename it
to 'system.ext4.tar'
3. Extract the system.ext4.tar. Now in case if your
TWRP backup is not in compression method, you will
directly get the system folder. Or if your TWRP
backup is in compression method, you will get a
file named 'system.ext4', don't worry just again
rename it to 'system.ext4.tar' and extract to get
the 'system' folder
4. Collect the 'boot.emmc.win' file and rename it
to boot.img, now ypu manage the boot.img also
5. Now collect a META-INF folder from any custom
rom which is made for your device
6. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
7. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
8. Done.
Click to expand...
Click to collapse
I try to follow the tutorial you created but when the flash still fails , a description that appeared md5 not found , and whether the Meta - Inf / updater - script that must be made because I was dizzy with it
irwandwiyanto said:
I try to follow the tutorial you created but when the flash still fails , a description that appeared md5 not found , and whether the Meta - Inf / updater - script that must be made because I was dizzy with it
Click to expand...
Click to collapse
You need to use the Meta folder from a working rom installer for your phone, you then select the Meta folder, system folder (hold down the ctlr key to select each folder, then right clink the selected file and zip.
carl1961 said:
You need to use the Meta folder from a working rom installer for your phone, you then select the Meta folder, system folder (hold down the ctlr key to select each folder, then right clink the selected file and zip.
Click to expand...
Click to collapse
how do I get the Meta folder from the backup of my ROM ?
irwandwiyanto said:
how do I get the Meta folder from the backup of my ROM ?
Click to expand...
Click to collapse
sorry I meant META-INF folder, you use the META-INF from a working rom install for your phone. Look under your phones thread here on XDA and locate a rom and use it to go with your backup files so you can make a install of your backup
Question onf TWRP Step 3
akash_bd said:
Hi,
today I'm going to show how to create a flashable
zip from a CWM/TWRP Backup. This is specially for MTK
device(you can try in other device,may work). Here is
my step by step tutorial...
Requirements:
* PC
* CWM/TWRP Backup
* Winrar
* Brain
you need META-INF,system & boot.img for making a
flashble zip rom, so you have to collect these from
your backup
*CWM method:
1. Copy the CWM backup from Phone to PC
2. Extract system.ext4.tar file with winrar, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom which is made for your device
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done.
TWRP method:
1. Copy the TWRP backup from Phone to PC
2. Collect the file 'system.ext4.win' rename it
to 'system.ext4.tar'
3. Extract the system.ext4.tar. Now in case if your
TWRP backup is not in compression method, you will
directly get the system folder. Or if your TWRP
backup is in compression method, you will get a
file named 'system.ext4', don't worry just again
rename it to 'system.ext4.tar' and extract to get
the 'system' folder
4. Collect the 'boot.emmc.win' file and rename it
to boot.img, now ypu manage the boot.img also
5. Now collect a META-INF folder from any custom
rom which is made for your device
6. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
7. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
8. Done.
Click to expand...
Click to collapse
QUESTIONS
---------------------------
1. On STEP 3 I did the following:
Extract the system.ext4.tar.
If your TWRP backup is in compression method, you will get a file named 'system.ext4',
Rename it to 'system.ext4.tar'
Next part, " Extract to get the 'system' folder", does not work. What do I do here?
2. Doing #1 in Linux or does this need to be done win Windows?
3. META-INF - My HTC ONE X+ (code name evitare UL) does not have any custom ROMs I can find. What other sources of META-INF are there?
Please notify me at [email protected] when you post answers. Thanks
Click to expand...
Click to collapse
[email protected] said:
QUESTIONS
---------------------------
1. On STEP 3 I did the following:
Extract the system.ext4.tar.
If your TWRP backup is in compression method, you will get a file named 'system.ext4',
Rename it to 'system.ext4.tar'
Next part, " Extract to get the 'system' folder", does not work. What do I do here?
2. Doing #1 in Linux or does this need to be done win Windows?
3. META-INF - My HTC ONE X+ (code name evitare UL) does not have any custom ROMs I can find. What other sources of META-INF are there?
Please notify me at [email protected] when you post answers. Thanks
Click to expand...
Click to collapse
Rom List
You can get your META-INF from one of them
Extract to get the system folder:
CYGWIN Unpacking TWRP Backup Files
Download CYGWIN http://cygwin.com/
rename:
data.ext4.win to data.ext4.win.tar
system.ext4.win000 system.ext4.win000.tar
system.ext4.win001 to system.ext4.win001.tar
Make a directory in your CYGWIN Home [Username]folder
Example: untar
Use Windows File Explorer go to your CYGWING Home
C:\cygwin\home\carl (your user name will be here)
make any folder you choose
Example:
C:\cygwin\home\carl\untar
and C:\cygwin\home\carl\untar\data ( for data files)
put your renamed data files in a folder named data
C:\cygwin\home\carl\untar\data (this is to keep files separate when unpacked)
While in Explorer put your renamed system files in untar folder
start CYGWIN ( Use the Cygwin Terminal and then you can copy and paste these commands)
cd to untar folder
example:
cd\untar
do these commands one at a time, it will extract to a folder named system
tar -xvf system.ext4.win000.tar
tar -xvf system.ext4.win001.tar
cd to data
do this command
tar -xvf data.ext4.win.tar
tar -xvf data.ext4.win000.tar
tar -xvf data.ext4.win001.tar
all your data files will extract
Click to expand...
Click to collapse
carl1961 said:
What version is your phone
Click to expand...
Click to collapse
This is iBall Slide 7271 HD70 with preloaded KitKat 4.4.2
I lost my nandroid backup of stock network carrier's ROM so my friend made backup using same TWRP recovery and now I want to build flashable zip. He excluded only data and cache.
There are some things that confuses me.
This device (Alcatel OT M' Pop) has custpack.ext4.win. Do I have to include it and how?
This is all files from backup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also I used Cygwin Terminal to unpack system.ext4.win because 7Zip and WinRar gave me errors during unpacking process but interesting thing is that when I open archive with 7zip I can see META-INF folder Can I use that META and how the hell WinRar doesn't show it? Or is it safer to include META from another ROM for this device?
This guide will help you to convert a stock ftf file to a flashable zip file for CWM or TWRP or any other Recovery. Be sure you know what your doing before proceeding!!
Steps.
1: Extract the ftf file using any unzip manager or winter etc. You will see a bunch of files, but we only need the system.sin, boot.img, and META-INF files and folders for this procedure.
2: Go to META-INF->com->google-android folder and edit updater-script with a Text editor. Go down to package_extract_dir("system", "/system."); and change that to:
package_extract_file("system.sin","/dev/block/platform/msm_sdcc.1/by-name/system");
3: Save and exit.
4: Now create a zip of the boot.img, system.sin and META-INF files and folders and flash in Recovery. Enjoy!
If bootloop occurs then you may have done something wrong. Edit ROM again in PC and move to phone sdcard and try to flash again. If bootloops again, just flash stock ROM back.
Thanks!!!
Sent from my D6503 using XDA-Developers mobile app
Brandon Nel said:
This guide will help you to convert a stock ftf file to a flashable zip file for CWM or TWRP or any other Recovery. Be sure you know what your doing before proceeding!!
Steps.
1: Extract the ftf file using any unzip manager or winter etc. You will see a bunch of files, but we only need the system.sin, boot.img, and META-INF files and folders for this procedure.
2: Go to META-INF->com->google-android folder and edit updater-script with a Text editor. Go down to package_extract_dir("system", "/system."); and change that to:
package_extract_file("system.sin","/dev/block/platform/msm_sdcc.1/by-name/system");
3: Save and exit.
4: Now create a zip of the boot.img, system.sin and META-INF files and folders and flash in Recovery. Enjoy!
If bootloop occurs then you may have done something wrong. Edit ROM again in PC and move to phone sdcard and try to flash again. If bootloops again, just flash stock ROM back.
Thanks!!!
Sent from my D6503 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi, I only see boot.sin and not boot.img. What do I have to do? Thx.
Edit: In META-INF folder, I only have MANIFEST.MF.
Thx for any help.
Brandon Nel said:
This guide will help you to convert a stock ftf file to a flashable zip file for CWM or TWRP or any other Recovery. Be sure you know what your doing before proceeding!!
Steps.
1: Extract the ftf file using any unzip manager or winter etc. You will see a bunch of files, but we only need the system.sin, boot.img, and META-INF files and folders for this procedure.
2: Go to META-INF->com->google-android folder and edit updater-script with a Text editor. Go down to package_extract_dir("system", "/system."); and change that to:
package_extract_file("system.sin","/dev/block/platform/msm_sdcc.1/by-name/system");
3: Save and exit.
4: Now create a zip of the boot.img, system.sin and META-INF files and folders and flash in Recovery. Enjoy!
If bootloop occurs then you may have done something wrong. Edit ROM again in PC and move to phone sdcard and try to flash again. If bootloops again, just flash stock ROM back.
Thanks!!!
Sent from my D6503 using XDA-Developers mobile app
Click to expand...
Click to collapse
no boot.img or boot.sin is found. False tutorial.
***********************Unpack Repack nb0 Rom******************
Here Is a nb0 tool that unpacks and packs SUT nb0 factory images Used By Some manufactures like Infocus,
Requirements-
Window pc with java Installed
How to unpack
1. Paste your stock Rom File, something.nb0 in Tools Folder
2. Rename it to firmware.nb0
3. Run unpack.exe file hit enter , Done, check unpack Folder Your extracted Rom IS Present,
How To Repack-
1. cut whole Rom From unpack folder and paste in Repack Folder[ you can edit your images],
Like System app etc, don't change name]
2. Run Pack.exe hit enter Done,
3. Your New Rom Is readdy with the name System.nb0 in tools folder
Downloads-
MOD Edit :- Links Removed
bro after i unpack firmware.nb0 file theres no file that related to system.img.???
Incomplete unpacking
Sir please help to completely unpack nb0 file as sut is not working nor my phone's flashier with scatter file is available online. My phone is Infocus m330 with mediatek mt6592 chipset. It's bootloader locked with hard brick that not showing any sign of active other than when connected to pc can be flashed with v com drivers
Please help
Going to test it now ?
Thank you mate
link is dead
Thread Closed.
Thanks
SacredDeviL666.