Hi Everyone,
I now Introduce a (Status 7 FIX) and HOW-TO FLash update.zip in Clockworkmod Recovery with the help of Mobile Odin
I am Not Responsible If your Device Bricks... (But It is 80% safe if you Follow Steps Carefully)
It is for All Device Having Root and Clockworkmod Recovery installed on there Devices
Instructions :-
Step 1 - Get Your Update.zip (If Your Device Has Autommatticaly Download the update.zip in it's CACHE)( it will be Found in (/Cache/fota/update.zip))(Place it in (Root of) SdCard.
Step 2 - Open Mobile Odin 3.57 and tap on OTA/Update.zip and select Update.zip ,it is verify the files of zip and if you get an Error about signature check Disable
Step 3 - It Will Now make A New Update.Zip Named as :- [MobileOdin_Update.zip](If you use Mobile Odin to flash this zip it will give you a installer ERROR)
Step 4 - Now Time OF Clockworkmod Recovery to come Into use..... Reboot Into Clockworkmod Recovery and Select Choose ZIP From SDCard
Step 5 - Choose Zip From Internel SDCard and Select MobileOdin_Update.zip
Further, it will now be installed......
IF You Find This Post is Helpful, Then PLz HIT THANKS
thanks my bro
You 'r' welcome....
Sorry,
where can i find Mobile Odin 3.57 version ?
Will this fix work for Htc Explorer???
Im having the worst trouble downloading cm10 through recovery on my tab 2. I come up with this status 7 as well.. i have confirmed root, supersu working, and cwm recovery 6 works.
when i downloaded the mobile odin PRO and open it it says my device is not compatible and asks if i want it to dump some sort of file to possibly make it work? i let that do its thing and after finished it still doesnt open.. What should my next step be?
Where can I get the update zip??
I am not responsible for anything that happens to your phone if you flash these files to your phone.
How to get root access to your GT-S7500L.
Requirements:
1) ClockworkMod
How to install cwm
2) SuperSu
Downlod SuperSu to your phone ( cwm flashable zip)
How to Install:
1) Install cwm following the linked guide.
2) Download SuperSu to your phone so you can install it with cwm.
3) Go to recovery mode.
4) In recovery :install zip from sdcard -> choose zip from sdcard -> (go to the directory UPDATE-SuperSu-v1.25.zip is located and select it) -> choose YES .... -> Wait for it to install -> reboot system now
Credits to:
chainfire for his nice app
Good :thumbup:
Sent from my GALAXY Ace Plus using keyboard
I would like to install pacman rum, but fails to start installing TWRP .then for the first time gave status 7 error status 6 error. How to install help me
Here's a solution :
Extract the zip file --> META-INF folder --> com Folder --> google Folder --> android Folder --> updater-script File
Open it with Notpad++ or Microsoft Word and DELETE THE FIRST LINE ONLY!
now compressor the ROM folder to ZIP extension !
all the credits go to OptimusRS give him, say thanks for him
anas/LY said:
Here's a solution :
Extract the zip file --> META-INF folder --> com Folder --> google Folder --> android Folder --> updater-script File
Open it with Notpad++ or Microsoft Word and DELETE THE FIRST LINE ONLY!
now compressor the ROM folder to ZIP extension !
all the credits go to OptimusRS give him, say thanks for him
Click to expand...
Click to collapse
i try this method working but twrp this time is error status 6. ( my english bad
do you have wkpark custom bootloader?
Well, it's actually really simple. i just got the same problem and recently just successfuly installed it.
The Steps(This only works if you use ics rom with wkparks 1.25 bootloader):
1. change the bootloader. Install the GB bootloader.
2. install cwm/twrp recovery for GB (these two easy steps can be done easily with OS_HACKING Tools v1.2)
3. factory reset(do any other wipe if you want)
4. install. after installation, when you reboot, you'll get stuck on lg logo. that's OK. to the next step.
5. install the wkparks 1.25 bootloader(again, this is easy with OS_HACKING Tools v1.2)
6. reboot and (if it works) enjoy!
That's all. Hope that was helping.
Sorry for the english.(-_-')
MutiTool - Swiss army knife - MUST have for Newbies. 17Menu >300 choices. believe it!
MutiTool Advaced - Swiss army knife - All in One Tool is on post#3
MutiTool Basic- Swiss army knife - MUST have tool for Newbies.
This is for N7100 only, N7105 user look here.
Glad to announce a utility tool - MultiTool.
This is state of the art must have tool for all newcomers. You can manage following things with it.
- Root
- Busybox
- EFS Backup/Restore
- Recovery changer
- Kernel changer
- Modem changer
- Backup/Restore System App & Framework folder
- Bloatware Backup-Remove-Restore
- LockScreen Security bypass
- Clean device to prepare for Triangle Away
- Flash Recovery/Kernel/Modem from SD card (.img .bin)
Details of features under Installation & Features
Installation and Features MUST READ BEFORE USING
So You must have CWM/TWRP Recovery Installed to use this tool. Here is detail guide to get CWM on your device.
Procedure to get CWM : Click to Show Contents if you want to know How to flash CWM. If you have CWM installed then move to next step - MultiTool Intallation and features.
Step 1
Download Philz_touch_*n7100.tar.md5 Also you need to have Kies OR Samsung USB driver installed on PC.
1.Open Odin and select PDA tab (see image below) (Get Odin from here)
2.Point to recovery file you have downloaded philz_touch_* -n7100.tar.md5
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC (see image below)
[Note : normally, phone should auto-reboot into recovery.
If it reboots into android and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm]
On successful flashing your recovery change to CWM, Now Next step How to use Multitool
Installation of Multitool and Detail features
- Download DrKetan_MultiTool-AromaVxx.zip from end of this post and copy to SD card (Internal / Ext)
- Reboot device to Recovery (Vol Up +Power + Home).
- You will have recovery menu like this(see image below), Select Install zip
- Then select Int/Ext SD card depending on you have copied file location.
- Select file you have copies DrKetan_MultiTool-AromaVxx.zip and hit Entre. (See image)
This will Open Aroma Installer and you will have following Option to perform. Read every option in detail before proceeding.
1.Root
Here you will have two option.
A.Root : You can root your device with this option, Also this option cleans leftover of previously installed Superuser/SU of different superuser app.
In case your device is previously rooted and on reboot you can't see SuperSU app in drawer OR if you unable to update binary, simply update from Play store and it should work.
B.BusyBox - Routinely this doesn't needs and most of app needs root works without this too. Still any of your app demand this then you can select this option also you can do it later too.
2.EFS Backup If you are newbies and don't know why you need this then first read this thread. I recommend all user to make EFS backup if you still don't have.
A.EFS Backup : This will make EFS backup in format of raw imahe efs.img to int SD card MyEFS folder
B.EFS Restore : This will restore previously made backup in case you lose IMEI and need it.
3.Recovery - This is recovery changer tool.
You can switch to different recovery like
A.Philz touch CWM based recovery
B.TWRP
C.Stock Recovery- remember if you flash stock recovery, you will have to use odin to flash CWM/TWRP.
Here is Philz Recovery original thread
Here is TWRP official project website
4.Kernel - You can switch between kernel
Available kernels are
A.NEAK kernel B.Perseus Kenel C.Stock Kernel
Here is Neak kernel original thread if you have any queries for NEAK kernel Credit @simone201 for NEAK kernel.
Here is Perseus Kernel original Thread, in case you have any kernel related queries for Perseus Kernel. Credit @AndreiLux for Perseus Kernel
5.Modem
A.Old Modem LK6 : Don't Flash this on New ROM ME6 and later otherwise you will lose IMEI
B.New Modem MG1 :If you downgrade ROM and lose your IMEI, flashing this new modem can restore your IMEI.
6.backup Restore general - Helpful before trying different MODs, if that doesn't work you can restore previous file wuth this.
A.Backup Framework folder - Will make backup of System/framework folder to IntSDcard/DrKetanMod/framework folder -Needs 100MB free space
B.Backup System Folder - will make backup of System/app folder to IntSdcard/DrKetanMod/app folder. it needs appr 700MB space.
C.Backup to ExtSD - will backup System/app + System/framework folder to ExtSDCard/DrKetanMod. Needs 800MB space.
For Restore select option according you have selected backup location.
D.Restore Framework folder from IntSD
E.Restore System/App folder from IntSD
F.Restore System app and framework folder from ExtSD
7.Bloatware
A.Backup Bloatware - Select this to backup bloatware before removing it so you can restore anytime you need it.
B.Remove Bloatware - You can remove batch bloatware with this. To remove selected bloatware use this tool
C.Restore Bloatware
8.LockScreen security bypass
A.Remove Password - If you forget your lockscreen password/Pin/Pattern, you can bypass security with this option. This will remove PIN/Password and you can reset new. In case you bypass Pattern then you may have pattern on reboot but you can unlock with any pattern and you can reset your new pattern.
9.Prepare device to use TriangleAway Newbies are not knowing about their recovery/kernel so this tool will help to reset stock.
A.Clean device - This will remove all left over of Super user app and SU, also remove Busybox and symlink of busybox. As well this will Replace CWM to Stock recovery. But still clean root access will remain present to use triangle away app. That can be unroot with SuperSU settings.
Again if device doesn't have SuperSU app OR fail to update binary then update it from play store.
Remember after selecting this option your recovery will be stock and if you need CWM, you have to use Odin again
B.Select This If you have stock kernel - If your kernel is custom and you want to make device clean you also have to select this option along with A. to use triangle away.
10.Own Flashing
No more Flashable zip OR Tar needed to flash extracted recovery/kernel.img OR modem.bin
You can extract recovery.img or boot.img or modem.bin from stock ROM by simple unzip tool and put file on Int/Ext Sd card root directory then you can follow below mentioned task from aroma to flash that stuff.
A.Flash Kernel from IntSD
B.Flash Kernel from ExtSD
C.Flash modem from IntSD
D.Flash modem from ExtSD
E.Flash recovery from IntSD
F.Flash recovery from ExtSD
Download :
DrKetan_MutiTool_AromaV11 - Basic version
Dr.Ketan_MultiTool_Advanced
Old Version
DrKetan_MutiTool_AromaV10
-------------------------------------------------------------------------------------------------------------------------------------------------------
Hope friends you will find this tool helpful to keep on your SD card so you can use it anytime. If Niewbies can't post here in dev section, use this thread instead.
GoodLuck And Happy Flashing !
ChangeLog :
[15.09.13] DrKetan's MultiTool V10 -Initial release
[17.09.13] DrKetan's MultiTool V11 - two changes. A. Own Flashing - you can flash your recovery.img /boot.img /modem.bin. B.fixed issue on twrp using ExtSD option.
[21.09.13] DrKetan's MultiTool Advance V1 added. A. Aroma File Manager with Terminal. B. Odex remover C. Simplistic backup restore. D. System push
[29.09.13] DrKetan's MultiTool Advance V2 added. A.GPS Glonass fixer B. CSC Features C. build.propTweaks D. Bloat remover customized
Credits : @Phil3759 for his amazing recovery and busybox cleaning tool @Chainfire for his Superuser.apk and SU
I MutiTool Advanced
Ok friends glad to present advanced version of MultiTool. This is not much different from basic version but having some extra features and may not be comfortable to use by newbies. so releasing here as extra version and keeping basic vesion as it is.
Index
- Root
- Busybox
- Recovery changer
- Kernel changer
- Modem changer
- Backup/Restore System App & Framework folder/ EFS /Simplistic and mass bloatware remover
- Restore
- Odex remover
- Customized bloatware remover
- Customized CSC Features
- Tweaks - build.prop
- LockScreen Security bypass
- Push System Apks
- GPS Glonass Fixer
- Clean device to prepare for Triangle Away
This is advanced version and expecting no need to write guide about how to flash CWM and install multitool, still anyone have doubt please refer post #1.
Detail features
- Tool having some welcome screen, introduction, terms and condition, changelog, features list initially.
- After this is MainMenu. You can select either of one menu
A. MultiTool Utilities
B. Aroma File Manager with Terminal Console
C. System Information.
- Starting with Mutitool utilities, you will get following options
1. Root option : Inject root to device.
2. Busybox : Inject Busybox to device.
3. Recovery Flasher
Phillz recovery
TWRP recovery
Stock recovery
Recovery from SD card - You need to put desired recovery.img file on root directory of int SD card
Recovery from ExtSD card - You need to put desired recovery.img file on root directory of Ext SD card
Do Not change - To Keep your existing recovery
4. Modem Flasher
New MG1 flash - you can restore IMEI lost by downgrading ROM. I have removed option to flash old modem as it is not useful. still can flash any modem from SD card
Flash Modem from Ext SD - Put modem.bin file on root directory of ExtSD to flash
Flash Modem from Int SD - Put modem.bin file on root directory of IntSD to flash
Do Not change - To keep your existing modem
5. Kernel Flasher
Perseus Kernel
NEAK Kernel
RedPill Kernel (TW)
Adam Kernel
Stock Kernel (MG1)
Flash Kernel from ExtSD - Put boot.img file on root directory of ExtSD to flash
Flash Kernel from IntSD - Put boot.img file on root directory of IntSD to flash
Do not change - To keep existing kernel
6.Backup and Removel utility - This will be Menu page
There will be option to skip this OR to enter to customize backup/removal
EFS - A.Backup to IntSD B.Backup to ExtSD
Bloatware - A.Backup Bloatware (To bloatware folder in intSD)B.Bloatware Removal
System Backup A.Backup System/app folder to IntSD/DrKetanMod/app B.Backup System/framework folder to IntSD/Dr.KetanMod/framework
Simplistic Backup A.OdexB.Deodex If you want to try Simplictic framework. select according you are flashing version of simplistic. Incase simplistic doesn't work, you can restore your files.
7.Restore Utility - This will be menu page
There will be option to skip OR enter customiztion of restore.
All above option of backup will available here when you needs to restore.
EFS - A.Restore from IntSD B.Restore from ExtSD
Bloatware - Restore bloatware, if you have previously made backup
System Folder - A.Restore from DrKetanMod/app to System/app B. Restore from Dr.KetanMod/framework to System/framework
Simplistic - A.Odex B.Deodexed
8.Odex remover - This is Menu page
select skip OR enter to remove selected odex. This helpful when you flashing mod on odex rom doesn't have odex removal script
There is 19 common odex you can select any of it to remove
9.Customized bloatware remover
Now there is option to remove selected Bloatwares.
10.Customized CSC Features
You can have following CSC features. Thanks to @wesamothman and @MBariya for providing feature list. Just to add
-Backup is highly Recommended -Don't Use TRIGGER option first time -If you know your fetures file name is feature.cml and not others.xml then only select workaround option. - if first time regular flashing doesn't work, select only workaround option and flash. - still fail, select Trigger option + all requred feature and flash. - still fails select only workaround and flash - Still fails, Sorry hard luck, restore your backup.
11.Build Prop Tweaks
Following tweaks you can apply. Credits goes to original founder of tweaks, searched XDA for build.prop tweaked and selected some of it.
12.Lock Screen security bypass
You can use this if you forget PIN/Password/Pattern to remove it.
13.SystemPush - Push application to System folder
place apk and / or odex to sdcard/app folder to push system/app folder
place jar,apk and / or odex to sdcard/framework folder to push
system/framework folder
14.GPS/Glonass Fixer
Read This for more info, no need to download separately as it's included in tool.
15.Clean Device -
Use this to replace recovery with stock one, also remove old leftover of multiple superuser,su and busybox. still you will have root access to use triangle away
If your kernel is custom you have to use second option, as that will do above all plus replace custom kernel with stock one.
Will update screenshot later
Download
Dr.Ketan MultiTool Advance V2 [For 4.1.*]
Dr.Ketan MultiTool Advance V6 [For 4.3]
Older Vx
Dr.Ketan MultiTool Advance V1
Mirror
MultiTool V5 (For 4.3 OS) ---------- Mirror for V5 advance
Reserved one
Last one In case
Thanks a lot Doc for the tool and your entire contribution to the Note II comminity!! We sure will miss u! Just a request here: is it possible to work with another recovery, besides cwm? I'm using TWRP, hence the question. Thanks again!!
From the middle of nowhere to the center of everywhere!!
Yeah you can use CWM/TWRP
even you can change it from this tool only (without downloading).
chandoliasnikos said:
We sure will miss u!
Click to expand...
Click to collapse
How is that,did you bought other device doc???
I will go with Note3 once out.
May be this one last development for Note2 (unless change my mind )
Sad news for this section,where is the follow button????
I will supoort this section too but there will be little possibilities to develop without device. But sure still will be here for all newbies for their question on any of my thread.
I would like to try this out but I can't seem to find the link.
I guess host is still down. Will have to check after a few hours then. Thanks dr ketan.
We will miss dr ketan's apps and presence in note 2 forums.
Sorry for delay
Download link updated to OP
Finally good news for nOObs!
All in one toolbox by Dr.Ketan, waiting for few day for testing this tool.
Great Job Dr.Ketan. No need any extra zip files. only one file will do all things.
Will Miss your mods.
Can you please provide link for guide of Aroma installer. I have searched in xda forum but can't get proper result.
I have referred few, i will send you link tomorrow from office pc. But truly still not single guide there to explain everything. I have read a guide in note1 forum few days ago and I found it better than I referred.
Sent from my GT-N7100 using xda premium
I think one more utility we can add to this tool.
Flash own choice recovery kernel and modem. As many user still unable to manage flashable zip or tar from .img
So here you can put img file on sdcard and aroma can flash it.
Also looking forward to flash stock rom with aroma so no more prerooted rom you needs.
Sent from my GT-N7100 using xda premium
Hi dr ketan. I appreciate your hard work but your tool can't seem to save to my external sd card. The log says it is trying to create a directory in /external_sd but mine is /ExtSdCard. I think a rewrite of the code will solve the problem. I could send you the log file but I do not know how to attach it here.
Which ROM you have installed? and which recovery you have used ?
Next version have extra feature
- Flash your selected Recovery/modem/kernel from SDcard
You have to just keep your desired recovery.img/boot.img/modem.bin to Sd card.
No more need to have flashable zip OR tar.
DISCLAIMER
I'm not responsible for bricked devices or flashing wrong version
You are using this kernel at your own responsibility
——— !!!!!!!! YOU HAVE BEEN WARNED !!!!!!!! ———
IMAGE FORMAT KERNEL USE DIS METHOD & ZIP FILE FORMAT SEE SECOND POST
what u need
1.Rasher flash tool app
2.kernel files img format( save in internal storage )
step 1- DOWNLOAD THIS APP Rashr - Flash Tool
step 2-Open rasher flash tool app select kernel from storage
step 3-locate your kernel file( image format) in internal storage
step 4-select kernel file (image format) [Choose correct kernel file ]
step 5-flash kernel and reboot your device
step 6 - see the about in ur device
happy flashing....
kernel version TeLo-v5.37 flashable file so use dis method
ZIP FILE KERNEL FORMAT USE DIS METHOD
flash kernel (zip file ) via Flashify APK
step 1 - download dis app........link 1 , link 2
step 2 - open flashyfi apk tap flash on top
step 3- tap zip file option & select choose file
step 4 - select file manager & locate kernel zip file
step 5 - select kernel zip file ( choose correct kernel file )
step 6 - tap yup option & tap use provided option
step 7 - now flash complete & reboot device..........see about in ur device.......here screen shots
how about 32bit kernel for 32bit rom?
CKKnot said:
how about 32bit kernel for 32bit rom?
Click to expand...
Click to collapse
32 BIT custom kernel image format so see post 1.....