Database Info

unroot my tf300

I brought a transformer tf300 a few days ago that was already rooted and unlocked. I can't get adobe flash to work. I tried side loading a few version of adobe but still no success. Google market says my device is not compatible with adobe. I don't think the rooted device really serves me any purpose so I would like to take it back to factory condition. I need some help doing it since I have never rooted a device before.
It is rooted with
aokp-tf300t-build-38.
Android ver 4.0.4.
Kernel 2.6.39.4 g2bf1397-dirty.
Build IMM761.
Thanks for all your help if you can. I will need step by step instructions, and thanks again for the help

jflynn0 said:
I brought a transformer tf300 a few days ago that was already rooted and unlocked. I can't get adobe flash to work. I tried side loading a few version of adobe but still no success. Google market says my device is not compatible with adobe. I don't think the rooted device really serves me any purpose so I would like to take it back to factory condition. I need some help doing it since I have never rooted a device before.
It is rooted with
aokp-tf300t-build-38.
Android ver 4.0.4.
Kernel 2.6.39.4 g2bf1397-dirty.
Build IMM761.
Thanks for all your help if you can. I will need step by step instructions, and thanks again for the help
Click to expand...
Click to collapse
download the latest firmware from the asus site first. http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Then install the current software version. You can use the instructions from here to reflash stock rom in post 2
http://forum.xda-developers.com/showthread.php?t=1668173

dxwilliams40 said:
download the latest firmware from the asus site first. http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Then install the current software version. You can use the instructions from here to reflash stock rom in post 2
http://forum.xda-developers.com/showthread.php?t=1668173
Click to expand...
Click to collapse
don't know what im doing wrong when i try to flash the stock rom i get stuck as the ASUS splash screen with spinning wheel. Any suggestions?!?

cjohnsonthe2nd said:
don't know what im doing wrong when i try to flash the stock rom i get stuck as the ASUS splash screen with spinning wheel. Any suggestions?!?
Click to expand...
Click to collapse
Did you unzip the firmware and flash the zip named "US_epad-user-9.4.3.29"?

dxwilliams40 said:
Did you unzip the firmware and flash the zip named "US_epad-user-9.4.3.29"?
Click to expand...
Click to collapse
yes and CWM says install from sd card complete, no errors. I get the intial boot screen with the blue progress bar then I get stuck at the spash screen with the spinning wheel.
Luckily I had a nandroid of my AOKP setup and can go back to that. Ive tried a few times today to return to stock with the same results.

cjohnsonthe2nd said:
yes and CWM says install from sd card complete, no errors. I get the intial boot screen with the blue progress bar then I get stuck at the spash screen with the spinning wheel.
Luckily I had a nandroid of my AOKP setup and can go back to that. Ive tried a few times today to return to stock with the same results.
Click to expand...
Click to collapse
Remember to full wipe before installation including /system and after clear dalvik and cache then fix permissions.
By not wiping /system can cause some data to be left and corrupt stock installation had this happen on my g2x and have seen it on some other threads.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

I wiped the cache before I started the install and now when I boot into the usb fastboot my comp flashed a bootloader notification but then nothing else happens. I tried it a second time and I dont even get the notification. Also if I let it boot regular the Asus screen shows when i first boot but then nothing ever comes up just black screen

[Q] Need help getting up after try CM10.2 nightly

I was running Xylon and decided to download DLHacker's latest CM10.2. I backup up Xylon, wiped system, data, cache & dalvik and installed the the 8-13 build as well as the 8-12 gapps. First boot seemed to go okay but the keyboard kept force closing to the point that I could not complete the set-up. I forced a reboot, got back into TWRP and wiped cache & dalvik and fixed permissions. Now it hangs at the splash screen, doesn't boot loop, just hangs. So I got back into recovery, wiped system, data, cache & dalvik and restored my Xylon backup. Still hangs on the splash screen, doesn't boot loop, just hangs. I go back into recovery and wipe everything again and try to install an older build of Rage HD (4.1.2) and it reboots recovery everytime I try to install it.
I am currently installing the CM10.2 build and am going to use the 3-1 gapps I have on the sd and see if that makes any difference.
Any help would be greatly appreciated as looking now it seems like that combo is hanging on the splash screen too.

I experienced something similar when flashing CM 10.2. I ended up fastbooting back to stock.
Sent from my DROID RAZR HD using Tapatalk 4

mentose457 said:
I experienced something similar when flashing CM 10.2. I ended up fastbooting back to stock.
Sent from my DROID RAZR HD using Tapatalk 4
Click to expand...
Click to collapse
I think that's what is going to have to happen, can't do that from my work computer though, guess I'm phoneless for the day. That means no Freebeer & Hotwings podcast and no music. Oh well, that's why they call it the bleeding edge, sometimes ya get cut.

I plan to install the latest firmware through RSDLite when I get home, does anyone know if there an issue with installing the MR4 (VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-4_VQW_CFC) when I'm unlocked? Will I have any issue re-rooting or anything like that if I install the latest firmware rather than an earlier one? I never recieved MR4 OTA because I was no longer stock when it was pushed.

animez said:
I plan to install the latest firmware through RSDLite when I get home, does anyone know if there an issue with installing the MR4 (VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-4_VQW_CFC) when I'm unlocked? Will I have any issue re-rooting or anything like that if I install the latest firmware rather than an earlier one? I never recieved MR4 OTA because I was no longer stock when it was pushed.
Click to expand...
Click to collapse
There wont be an issue because you are unlocked. AFIK you cant root the newest firmware. If I were you id flash the last OTA that can be rooted, root it, use a root keeper such as voodoo to back it up, take the latest OTA, then restore root with the root keeper you used.

mentose457 said:
There wont be an issue because you are unlocked. AFIK you cant root the newest firmware. If I were you id flash the last OTA that can be rooted, root it, use a root keeper such as voodoo to back it up, take the latest OTA, then restore root with the root keeper you used.
Click to expand...
Click to collapse
I'll have to do a bit of research before I pull the trigger. I'm pretty sure the first 4.1.2 VZW pushed can be rooted...
To the root threadz!

You are correct. The first 4.1.2 was rootable. You could use the Droid Utility 2.0 to restore that version and root.
Sent from my DROID RAZR HD using Tapatalk 4

Finally got things fixed. I tried through rsd lite, but it kept failing. Downloaded one of the utilities and it seemed to work, but still hung on the splash screen. So after downloading a few other factory images which also failed to flash, I saw the problem. Somehow I had downloaded rsd lite 5.6. *facepalm* Probably stay stock for a little bit, thanks for the help.
Sent from my DROID RAZR HD using Tapatalk 2

Droid Razr HD bootloop after 1st boot

I have an XT926 with CM10.2 installed. I started clean and unlocked the bootloader, installed twrp2.6.0.0 and made a backup of my 4.1.2 stock rom. I then wipe everything multiple times, install cm10.2 and boot. It boots fine and I got everything set up. Then I go to reboot and it just hangs at the motorola logo and wont go anywhere. I have done this several times now, even with using the droid razr hd utility to go back to stock. Does anybody know why it could be doing this or any kind of a fix. Im going to try to see if it has this same problem with 4.1. But any help is appreciated.

clouse2013 said:
I have an XT926 with CM10.2 installed. I started clean and unlocked the bootloader, installed twrp2.6.0.0 and made a backup of my 4.1.2 stock rom. I then wipe everything multiple times, install cm10.2 and boot. It boots fine and I got everything set up. Then I go to reboot and it just hangs at the motorola logo and wont go anywhere. I have done this several times now, even with using the droid razr hd utility to go back to stock. Does anybody know why it could be doing this or any kind of a fix. Im going to try to see if it has this same problem with 4.1. But any help is appreciated.
Click to expand...
Click to collapse
i had this same problem until i installed the latest version of cwm 6.0.3.5 by Hashcode
you can update using this utility made by TucsTwo, updated by me.
http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar

problem flashing roms on moto g xt1032

Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.

Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app

skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now

Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help

Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.

I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa

A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.

Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great

hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)

A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?

will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032

dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.

[Q] CM11 Stuck on Bootloader

Attempting to get CM11 onto my Razr HD Maxx.
Steps I've taken:
Flashed CMW 6.0.
Enter Recovery
Format /system
Wipe data/factory reset
Wipe cache partition
Wipe delvik cache
Install CM11/gapps
Wipe data/factory reset
Wipe cache partition
Wipe delvik cache
Reboot system
Then it goes to the Warning Bootloader Unlocked screen and stays there.
Edit: I saw another thread where the user had a similar issue, but I cannot follow how they solved the problem.
Edit2: Backups aren't being flashed correctly either it looks like. Not sure if there is a way to put any new files onto the phone in its current state. If anyone could help me, I'd appreciate it very much. Possibly just bricked the phone :/

Furious Porkchop said:
Attempting to get CM11 onto my Razr HD Maxx.
Steps I've taken:
Flashed CMW 6.0.
Enter Recovery
Format /system
Wipe data/factory reset
Wipe cache partition
Wipe delvik cache
Install CM11/gapps
Wipe data/factory reset
Wipe cache partition
Wipe delvik cache
Reboot system
Then it goes to the Warning Bootloader Unlocked screen and stays there.
Edit: I saw another thread where the user had a similar issue, but I cannot follow how they solved the problem.
Edit2: Backups aren't being flashed correctly either it looks like. Not sure if there is a way to put any new files onto the phone in its current state. If anyone could help me, I'd appreciate it very much. Possibly just bricked the phone :/
Click to expand...
Click to collapse
I had a similar problem. I ended up having to flash the recovery several times via ADB and iirc it was Philz recovery that finally worked for me. Ironically i had to even use a different ROM initially to get it to take the recovery and boot and then was able to switch over to CM11 (the recovery kept reverting to an earlier version of CMR) This was when 6.0.4.4 had just come out so that may not be what you're running into
Make sure you also have a compatible Gapps. Also try another rom just to be sure its working. Currently i've got SlimKat going and they have an updated Gapps package. Its pretty similar to CM11 in overall feel so start there to make sure your recovery is working

vipthomps said:
I had a similar problem. I ended up having to flash the recovery several times via ADB and iirc it was Philz recovery that finally worked for me. Ironically i had to even use a different ROM initially to get it to take the recovery and boot and then was able to switch over to CM11 (the recovery kept reverting to an earlier version of CMR) This was when 6.0.4.4 had just come out so that may not be what you're running into
Make sure you also have a compatible Gapps. Also try another rom just to be sure its working. Currently i've got SlimKat going and they have an updated Gapps package. Its pretty similar to CM11 in overall feel so start there to make sure your recovery is working
Click to expand...
Click to collapse
I'm going to try to do the AP Fastboot/ADB with Philz recovery. I haven't done this in a while so I wasn't sure if there was a general guide to do so. Downloading motorola drivers to my laptop right now, then I'll be attempting to flash via ADB.
No luck trying to ADB. Not sure if I'm doing something wrong but the command prompt pops up for half a second and then disappears. Getting frustrated with this phone and have no idea what to do.

Can't say i've seen a guide lately on this but its a simple thing.
Put the recovery you downloaded like "philz_touch_6.19.3-xt926.img" in the same folder as your adb.exe
start a command prompt as administrator (right click it)...that part is important
get the phone in fastboot (hold down power + vol down) and connect by usb
enter the command "fastboot flash recovery philz_touch_xxxxxxx.img
unplug and reboot the phone to recovery and see what you get

vipthomps said:
Can't say i've seen a guide lately on this but its a simple thing.
Put the recovery you downloaded like "philz_touch_6.19.3-xt926.img" in the same folder as your adb.exe
start a command prompt as administrator (right click it)...that part is important
get the phone in fastboot (hold down power + vol down) and connect by usb
enter the command "fastboot flash recovery philz_touch_xxxxxxx.img
unplug and reboot the phone to recovery and see what you get
Click to expand...
Click to collapse
Using the MiniADB here: http://forum.xda-developers.com/showpost.php?p=28035617&postcount=10&nocache=1&z=1115106963552534
I am still not getting any luck. I run adb.exe as administrator, command prompt pops up for 1/2 second, disappears. I then run RunMe as administrator. This brings up command prompt up, I type "fastboot flash recovery philz_touch_6.19.3-xt926" hit enter.
This comes back: error: cannot load "philz_touch_6.19.3-xt926"
Edit: Disregard the post. I got it to flash philz recovery. I am in Philz Recovery right now. I am going to wipe, etc. Then re-flash the rom.
Edit2: After wiping and flashing the rom/gapps I am still stuck on bootloader. The files I'm using are:
cm-11-20140130-NIGHTLY-xt926-epinter.zip
gapps-kk-20131118.zip
If you have suggestions on trying different release or gapps, or any other ideas let me know.
Edit3: Whenever I flash the ROM it comes up "install from sd card complete". Then however it says "Cannot write to /sdcard/clockworkmod/.last_install_path Press any key to continue. No clockworkmod/aromafm.aromafm.zip in storage paths.

Furious Porkchop said:
Using the MiniADB here: http://forum.xda-developers.com/showpost.php?p=28035617&postcount=10&nocache=1&z=1115106963552534
. The files I'm using are:
cm-11-20140130-NIGHTLY-xt926-epinter.zip
gapps-kk-20131118.zip
If you have suggestions on trying different release or gapps, or any other ideas let me know.
Click to expand...
Click to collapse
Oh boy...yeah go with the unified builds. The latest nightly should be fine http://download.cyanogenmod.org/?device=xt926
As for Gapps there are all kinds floating around http://wiki.cyanogenmod.org/w/Google_Apps would be the "official CM ones. I used Slim's (but i'm also running SlimKat but should also work on CM11 here http://slimroms.net/index.php/downloads/dlsearch/viewcategory/1150-addons4-4

vipthomps said:
Oh boy...yeah go with the unified builds. The latest nightly should be fine.
As for Gapps there are all kinds floating around would be the "official CM ones. I used Slim's (but i'm also running SlimKat but should also work on CM11
Click to expand...
Click to collapse
Okay. Downloading the latest nightly and gapps "gapps-kk-20140105-signed.zip"
Since my phone is still stuck in the bootloader, what is the best way to transfer the files to my phone?

Furious Porkchop said:
Okay. Downloading the latest nightly and gapps "gapps-kk-20140105-signed.zip"
Since my phone is still stuck in the bootloader, what is the best way to transfer the files to my phone?
Click to expand...
Click to collapse
the best way is if you have an USB Micro SD card reader. far far easier. Other than that you can use ADB to push the files over but you'll have to find the commands as i don't know them off-hand

vipthomps said:
the best way is if you have an USB Micro SD card reader. far far easier. Other than that you can use ADB to push the files over but you'll have to find the commands as i don't know them off-hand
Click to expand...
Click to collapse
Okay, I'm gonna try to use ADB. Not sure why but ADB always has trouble recognizing my phone. Haven't gotten around that quirk which I think is also the reason I was having trouble getting Philz to flash.
Edit:Not sure how I did it, but I mounted my SDCard in recovery, and it connected to my computer and was able to copy everything fairly easily.
Edit2: Still stuck on the bootloader screen :/
Edit3: I've done everything again: fastboot'd Philz recovery, wiped everything, installed CM11, flashed gapps, wiped data/cache. Rebooted and still get stuck in bootloader. No idea what step is next, or if I should just try to install a different rom.
Is it possible my phone is bricked?

So after having no luck with CM11 or Philz touch recovery, I flashed CWM and tried to flash CM11 again. No luck, so I tried flashing SlimKat. No luck with that either.
Really clueless atm about what to do.

Use one of the toolkits to flash back to stock. Its all automated and then you can try again
Sent from my Droid RAZR MAXX HD using xda app-developers app

vipthomps said:
Use one of the toolkits to flash back to stock. Its all automated and then you can try again
Sent from my Droid RAZR MAXX HD using xda app-developers app
Click to expand...
Click to collapse
Where do I find the toolkit? Is it on xda or from motorola?

It's in the development forum here on XDA. Was trying to link it but was not working http://forum.xda-developers.com/showthread.php?t=2474393
Sent from my Droid RAZR MAXX HD using xda app-developers app

vipthomps said:
It's in the development forum here on XDA. Was trying to link it but was not working http://forum.xda-developers.com/showthread.php?t=2474393
Sent from my Droid RAZR MAXX HD using xda app-developers app
Click to expand...
Click to collapse
Okay, thanks. I went through with the tool and then tried to flash CM11 again but had no luck.
I am going through with the tool again and then I will be giving SlimKat a shot.

vipthomps said:
It's in the development forum here on XDA. Was trying to link it but was not working http://forum.xda-developers.com/showthread.php?t=2474393
Sent from my Droid RAZR MAXX HD using xda app-developers app
Click to expand...
Click to collapse
I forgot to root again before installing SlimKat. What would be the best way to get rooted based on my situation?

Furious Porkchop said:
I forgot to root again before installing SlimKat. What would be the best way to get rooted based on my situation?
Click to expand...
Click to collapse
Boot to Philz and root there its under advanced options I think

http://forum.xda-developers.com/showthread.php?t=2616191

Furious Porkchop said:
I forgot to root again before installing SlimKat. What would be the best way to get rooted based on my situation?
Click to expand...
Click to collapse
Slim should be pre-rooted, just enable it in Dev options or you can flash a SU .zip on recovery.

How's it working out for you? Any luck?

Stuck after 4.4.2 root and unlock
I'm having the same issue described above, however I rooted with towelroot. I unlocked the bootloader and am running twrp 2.7. I've only tried to install CM11, but it just freezes at the boot splash, and cycles through that until I shut it down.
If it matters, I originally rooted a year ago through the first unlock found by Dan rosenberg. I ran CM11 until this most recent root was found, and then I flashed the stock kit kat so I could get the updated antenna software.