Related
Hi all there this is my First thread.
First I would like to Thank XDA for giving this opp to me.
and i would like to thank all those who contributed to this becoz I haven't done any thing for this.
Im just posting the method i tried and it worked fine.
Moderators forgive me if it comes under any violation and if so i would like u to remove this Thread.
I thank :good:aorth,bdigitalstudio ,garyd9,DarkSwanKnight:good: For all the gud work they have done all Credits belongs to them.
Warning am not resposible for the consequences if any thing goes wrong,Am posting the method that i used to root and Install CWM 6.0.1.0 in My tab P6200.Use It at ur Own Risk.
Prerequisites
* Make sure u have Enough Charge Left(min 30%) for a safe side.
* Download the Attachments I have given and place it in ur External SD card(all credits goes to those who made those Files).
* Make Sure u have Stock 4.0.4 Rom.
Now lets Begin.
1.Root ur tab by follwing the method Mentioned below
* Download attached root.zip and CWM.zip and place it in ur External Sd card.
* Get into Recovery Mode by pressing Power button and Volume Up button continuously(Hold it both at least for 30 secs max)
* From the Stock Recovery navigate to the option Install zip from external sd card by using the volume buttons.
* select the Install Zip from Ext Sd card option by pressing the power button
* Install it by selecting Yes-Install CWM.zip .
* now navigate to the CWM.zip file u placed in ur External SD card.
* Now the temporary Clock Work Mode Recovery will appear.
* It is A touch Based Clock work Mod Recovery so u can use ur fingers to select what u want.
* In that recovery Select the Install Zip from SD card.
* Navigate to root.zip file u downloaded and scroll to select Yes-Install root.zip it to install.
* After Installation Completes u have Rooted ur tab with temporary Clock work Mod.
* Don't Reboot If u want to Install Permanent CWM,or if u just want root ur tab with no CWM installed u can reboot now.
2. To Install Clock Work Mod 6.0.1.0 Permanently
* Select Install zip from Sd Card again.
* Navigate to the recovery.zip file u have downloaded.
* Install the file by selecting Yes-install option.
* wait until it says Installation Successful.
* Now reboot and Enjoy ur Rooted tab with CWM 6.0.1.0 installed.
Thnk for All those who really Worked hard to get this work done.
Bro, please take note, cwr temporary only use for flashing, don't ever use to wipe. It will brick your device, since i already brick my tab, and only can be save until u change the new main board. So please be careful.
Sent from my GT-P6200 using Tapatalk 2
Did u tried to wipe from official Stock ICS rom.
I did wiped my Tab and it got out without any problem.
bujai5279 said:
Bro, please take note, cwr temporary only use for flashing, don't ever use to wipe. It will brick your device, since i already brick my tab, and only can be save until u change the new main board. So please be careful.
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Yup...With stock recovery all good, but with cwr temporary it brick my tab 3month ago, just to share because i've already change my main board 3month ago. So be careful especially for ics4.0.4. Because some people also bricks after wipe in stock recovery, Thks.
For save rooting, i suggest using supersu 0.94/0.95 from chainfire it can flash from stock recovery. And flash aorth recovery (6.0.1.0.img) using mobile odin. So we can avoid using that cwr.
how to use mobile odin and flash the recovery? U can check to aorth thread and ask senior members for any help.
Sent from my GT-P6200 using Tapatalk 2
bujai5279 said:
Bro, please take note, cwr temporary only use for flashing, don't ever use to wipe. It will brick your device, since i already brick my tab, and only can be save until u change the new main board. So please be careful.
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Same mine...centre changed my mainboard after brick...so WARNING, DO NOT WIPE DATA USING STOCK RECOVORY AND TEMPORARY CWM on ICS.....n one question, i wipe cache/partition using permanent CWM(CWM 6.x.x.x), it brick my tab oso...but wipe data and dalvic cache is ok...anyone can wipe cache??
Sent from my GT-P6200 using XDA Premium
What u mean brick? It's after wipe it will reboot and stuck at samsung logo?
I'm also got brick last week, but different case, i can't wipe cache/Partition and dalvik but when wipe factory reset it reboot and stuck at the samsung logo(Using aorth cm9 version 17sep) It weird rite?. I've flash back to stock ICS firmware using odin1.85, check repartition and select .pit file. Now my tablet back to normal. For more info check this link:
http://forum.xda-developers.com/showthread.php?p=31913006
hope this can help u.
Sent from my GT-P6200 using Tapatalk 2
Big thanks to fouzudeen!!! worked like a charm was done in seconds (really)
bujai5279 said:
What u mean brick? It's after wipe it will reboot and stuck at samsung logo?
I'm also got brick last week, but different case, i can't wipe cache/Partition and dalvik but when wipe factory reset it reboot and stuck at the samsung logo(Using aorth cm9 version 17sep) It weird rite?. I've flash back to stock ICS firmware using odin1.85, check repartition and select .pit file. Now my tablet back to normal. For more info check this link:
http://forum.xda-developers.com/showthread.php?p=31913006
hope this can help u.
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Mine happen like this..when i want to wipe data, screen will freeze then reboot n stuck at samsung logo..flashing firmware oso didnt make it solve..i tried Pit patch file, but solved only 80%...it can boot to dekstop, but then it will request password on HC..on ICS, many app FC every second..
Hope it will help others too thanks.
bossie1975 said:
Big thanks to fouzudeen!!! worked like a charm was done in seconds (really)
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA Premium HD app
Member90 said:
Mine happen like this..when i want to wipe data, screen will freeze then reboot n stuck at samsung logo..flashing firmware oso didnt make it solve..i tried Pit patch file, but solved only 80%...it can boot to dekstop, but then it will request password on HC..on ICS, many app FC every second..
Click to expand...
Click to collapse
Man, u need to ask senior members.
Sent from my GT-P6200 using Tapatalk 2
bujai5279 said:
Man, u need to ask senior members.
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Mine already solved by super duper senior at samsung centre..hahaha...they changed my mainboard...
Sent from my GT-P6200 using XDA Premium
problem
i am on CWM 6.0.1.0 and applied update to the temporary CWM.zip i tried to choose from sd card it says cannot mount sd :crying:
anyone got any ideas ?
Where did u placed the CWM.zip file in ur internal or in ur External Sd card.
rustynail1985 said:
i am on CWM 6.0.1.0 and applied update to the temporary CWM.zip i tried to choose from sd card it says cannot mount sd :crying:
anyone got any ideas ?
Click to expand...
Click to collapse
So far everything seems to be working i think, my tablet should be rooted and apps such as setdns should have no problem. But no.. I installed CWM-SuperSU-v0.94.zip thinking the old supersu version i use was the cause, and still no promt asking for permission. Any idea how to get this root thing fix? :\
fouzudeen said:
Where did u placed the CWM.zip file in ur internal or in ur External Sd card.
Click to expand...
Click to collapse
I put it in external sd card
i formated it and put the 3 files again it works i applied the cwm then root but still no root access super user app like a dead thing in the phone
Sent from my GT-P6200 using xda premium
Here short instruction
1. Boot to stock recovery
2. Flash CWM.zip...........CWM will appear
3. Flash Root.zip
4. Flash recovery.zip...
5. Reboot.........easy right...
Xperia X8
Xperia Mini Pro
Xperia Neo
Galaxy W
Xperia Play
Xperia U
Galaxy SII G
Galaxy Tab 7 Plus
Sent from my GT-P6200 using XDA Premium
Sorry if i understood in a wrong manner . . . did u flashed CWM.zip back after completeing the process.
rustynail1985 said:
I put it in external sd card
i formated it and put the 3 files again it works i applied the cwm then root but still no root access super user app like a dead thing in the phone
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
After flashing CWM and root . . . . reboot and download root checker app from play store to verify whether ur tab is rooted or not.
rustynail1985 said:
I put it in external sd card
i formated it and put the 3 files again it works i applied the cwm then root but still no root access super user app like a dead thing in the phone
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
fouzudeen said:
After flashing CWM and root . . . . reboot and download root checker app from play store to verify whether ur tab is rooted or not.
Click to expand...
Click to collapse
downloaded it NOT ROOTED
Whats your firmware ver.
rustynail1985 said:
downloaded it NOT ROOTED
Click to expand...
Click to collapse
hi guys, i recently rooted my samsumg infuse 4G (AT&T using superoneclick method. i downloaded a custom ROM codename in the bid to upgrade my OS to 4.1 jellybean. when i rebooted the phone in recovery mode, there was no option for install from SD card only format SD card. pls can someone help me out.thanks in anticipation
Did you happen to go to the mounts and storage?
Sent from my SGH-I997 using xda app-developers app
i did not....followed the upgrade process but there is no option for install from sd card after deleting cache step.
Well can you post a picture of your recovery screen?
Sent from my SGH-I997 using xda app-developers app
Change your recovery
said_abush3leh said:
Change your recovery
Click to expand...
Click to collapse
pls how do i change my recovery?
I rooted my phone ( Samsung Galaxy Y Pro Duos GT-B5512) and installed some custom ROM. After that when i boot my phone using ( Vol + Home + Power ), It starts only in recovery mode and gives error that Sdcard can not be mounted.
I am not able to wipe any data or change my ROM. I tried to change ROM using Odin3_V1.85_3 and PDI fiile( B5512XWLG1_B5512ODDLG1_B5512DDLG1_HOME.tar.md5).But that too gives error like Failed.
I have formatted sdcard too but didnt work.
Pelase Help me out with this.
Thanks in advance to all who take the time to read this.
ravalap said:
I rooted my phone ( Samsung Galaxy Y Pro Duos GT-B5512) and installed some custom ROM. After that when i boot my phone using ( Vol + Home + Power ), It starts only in recovery mode and gives error that Sdcard can not be mounted.
I am not able to wipe any data or change my ROM. I tried to change ROM using Odin3_V1.85_3 and PDI fiile( B5512XWLG1_B5512ODDLG1_B5512DDLG1_HOME.tar.md5).But that too gives error like Failed.
I have formatted sdcard too but didnt work.
Pelase Help me out with this.
Thanks in advance to all who take the time to read this.
Click to expand...
Click to collapse
Flash another version of cwm (V6)
And then retry
This should fix your problem:thumbup:
HIT THANKS IF I HELPED
Sent from my GT-S7500
How to Flash another version of cwm (V6) ?
[email protected] said:
Flash another version of cwm (V6)
And then retry
This should fix your problem:thumbup:
HIT THANKS IF I HELPED
Sent from my GT-S7500
Click to expand...
Click to collapse
Hi. Can u tell me the procedure to Flash another version of cwm (V6) as i am not able to do it
because my memory card is not getting mounted and phone always starts in recovery mode with previous version of cwm.
Flash ur stock rom
This should fix ur problem:thumbup:
Sent from my GT-S7500
How to Flash stock rom ?
[email protected] said:
Flash ur stock rom
This should fix ur problem:thumbup:
Sent from my GT-S7500
Click to expand...
Click to collapse
Mr Amit.
Thanx for replying. can u tell me procedure to flash stock rom ?
it would be very helpful.
http://forum.xda-developers.com/showthread.php?t=2000141
Go to this link
Download indian one
And flashing tool
In odin select pda and select pda file
Then select csc and select csc file
Put ur phone in download mode
Volume up to continue
After odin shows yellow click start
Wait ot to complete
Your phone will reboot
Dont remobe usb cable till your phone is rebooted completely
Thats all:thumbup:
HIT THANKS IF I HELPED U
Sent from my GT-S7500
Hi Guys
Im newer to this
I rooted my galaxy fit and then with the help of ROM manager I accessed CWM , then I tried to install custom ROM ,,, after rebooting phone stuck with white text android
Please simebody help me solve this
Sent from my GT-P3100 using xda app-developers app
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Harpratap said:
Wipe data/reset
Wipe dalvik cache
Wipe cache
goto mounts & storage and format system
Flash the rom again
Wipe data
Reboot
Click to expand...
Click to collapse
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
I did like u said
But no luck
Its still showing white android text in boot screen
Im able to go to download mod and recovery mod but I dont know whats happening ....
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Harpratap said:
Have patience,wait for 10-15 minutes.
First of all, you shouldn't have used Rom manager. It bricks our device
Read the guide in the top of general section and install a proper recovery from odin.
Maybe the zip you have downloaded is corrupted. So download it again and try.
Make sure you are on official gingerbread(2.3.x) and not froyo(2.2)
If none of this works,there is something seriously wrong with your device.
But don't worry,you can flash stock via odin and revert back to factory state.
Click to expand...
Click to collapse
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
First of all let me thankyou for support
I have tried 2-3ROMs but none of them works for me...
I searched a lot to find how to flash ROM via odin but unfortunately I didnt find anyn useful thread.
Can u send a link of odin flashing method ,
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1606380 -All in one guide (read it thoroughly)
^flashing stock rom
^flashing CWM
And try Jana rom,official cm7, minicm7 at first because they boot very fast
And you cannot flash roms via odin. Odin is only for flashing stock firmware and recovery
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
You can download sock firmware from SAMMOBILE site. It is an open source website where you can download all samsung phone's official stock firmware.
Hit thanks if I help
Sent from cooperve.
glsnjoseph said:
I read that with 4 file package we can flash ROM (Official ) via odin,
In my case do I need to flash official firmware and then try Custom ROM or not
Kindly send a link to download 4 file package of stock firware
Unable to download from samfirmware.com
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Link firmware with 4 files:
http://www.hotfile.com/dl/168101698/7eed3f5/S5670XWKTI_S5670DBTKT1_DBT.zip.html
The right click on ODIN and this:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Not say thanx hit thanx button.
Hit thanks if I help
Sent from cooperve.
glsnjoseph said:
Thanxs
I did iy with stock firmware downloaded from samfirmware.com
Now Im on syock firmware
Tried to install custom ROMS, but no luck still same problem android white text......
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
ZmisiS said:
Which customize ROM?
For customize ROM you need with ODIN instal Clockwork Mod Recovery (CWM).
http://forum.xda-developers.com/showthread.php?t=1339640
Now you can install custom ROM. Go in CWM and go on wipe data reset, wipe cashe partition in Advanced wipe dalvik cashe. Install ROM and again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot phone. It need wait about 5 minutes for system up.
Click to expand...
Click to collapse
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I don't know because I not used Jellybread, and not I used Jana ROM. I used CM10.1.4 from here:
http://jenkins.androidarmv6.org/job/android/457/
glsnjoseph said:
Dude I tried like that only , installed CWM with odin
But I have no idea whats wrong with my phone
I tried Jellybread and jana ROM but after flashing JanaROM its showed JanaROM boot image but nothing happened..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Galaxy_Rohit said:
When u are flashing any custom rom over the stock rom for the 1st time then u *should* necessarily wipe /system otherwise you'll get hanged up forever on that android-text/boot-up screen.
Click to expand...
Click to collapse
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Actually I tried all the way dude
Googled a lot to find a solution but didnt find anything useful.
I tried to flash CM 10.1 but it shows booting but nothing else..
Only boot image ,,,,,,
But Im not ready to give up
Here I will explain the whole thing I did
1.I rooted my phone with help of update zip
2.I connected phone to computer in download mode and flashed CWM recovery via odin,, in that I selected ops tag and then one package with cwm.
3.after flashing CWM via odin , I entered into CWM mode by pressing Ok button +power on button.
4.I wiped data, cache, dalvik cache, formatted system
5.Install zip from sd card and selected my Custom ROM
6.AGAIN Wiped data, cache, , dalvikcache
7.Rebooted
Then It stucks in boot image or blank screen and sometimes in white android text...
Hope somebody can help me now
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Stock ROM work on your phone?
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Galaxy_Rohit said:
Bro! Goto "mounts & storage" & select "format /system"...(if u haven't done yet). Then try flashing custom rom. & always use cwm recovery by tjstyles v5.0.2.7
Let's hope for the best...:thumbup:
Click to expand...
Click to collapse
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
glsnjoseph said:
Ya I have done that too
Formatted system from mounts and storage
Stock ROM works for me
Im on CWM 5.0.2.7
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Do this straight away:-
1. Flash Froyo 2.2.1(4 package) of ur country.
2. Then flash Gingerbread 2.3.6(one package) of ur country.
3. Then flash cwm via Odin.
4. Flash the custom rom thereafter.
Since it seems a bit complex issue, u need to try this to ensure zero errors.:sly: Btw u can try above steps in ur spare time.
As for me, I always try all methods that I know b4 concluding anything.
I had rooted galaxy fit with 2.3.6. Today i did factory reset on my phone including wiping memory card(as i had increased my internal memory using external sd). Since wiping and reset my phone is continuoudly rebooting. I also tried restore option but nothing happened. I do not know much about it. Please help.
Sent from my Micromax A116 using xda app-developers app
Did u use cwm recovery to format the samsung stock rom??:what: If yes... then it's O.K. No need to worry. Just flash any custom rom (cyanogenmod 7 recommended for flashing the very 1st time over samsung stock rom).
Note: Do format /system b4 flashing.:thumbup:
I do not have much idea about this. Would u please explain the procedure.
Sent from my Micromax A116 using xda app-developers app
Enter recovery mode by pressing & holding Home+Power buttons together when the phone is switched off.
Since ur phone isn't turning on & u mentioed that restore option is not working...I guessed that u might have cwm recovery...coz restore option belongs to cwm recovery... CWM recovery is used for custom roms...while the Android OS installed on the phone at the time of purchase has it own different recovery (known as stock recovery). Stock recovery has much less options than cwm recovery.
BTW how did u format ur phone...?? from settings or via recovery??:sly:
I did factory reset from setting. After that it restarted and opened the boot menu from wher i selected the wipe option
Sent from my Micromax A116 using xda app-developers app
During formatting via settings, the phone automatically reboots after succesful format. & boots directly to home screen (not ny boot menu).
Now can i get my phonr back in initial stage by flashing any rom or i will have to go to service centre.
Sent from my Micromax A116 using xda app-developers app
sunil birda said:
Now can i get my phonr back in initial stage by flashing any rom or i will have to go to service centre.
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
You can get your phone back to initial stage by flashing a stock rom from http://www.sammobile.com/. There you will find a stock rom for your phone.
& follow the steps correctly bro...!!
For 4 pkg f/w(e.g. froyo):-
OPS: BENI_v1.0.ops
BOOT: APBOOT....
PHONE: MODEM....
PDA: CODE....
CSC: CSC....
For one pkg f/w(e.g. gingerbread):-
OPS: BENI_v1.0.ops
One Package: gingerbread.home.tar.md5
Hope this helps...!!!
thanks
thanks to galaxy_rohit and junnix for help.
sunil birda said:
thanks to galaxy_rohit and junnix for help.
Click to expand...
Click to collapse
Welcome bro...