Hello .I have a big problem , I have Mid chines tablet .After factory reset I can not turn on tablet that just stuck at android reflexing letters).But when I turn tablet of and turn again on holding power buton and vol. down then just write system upgrade activated and then looking for utscript1.sh , utscript2.sh ,utscript3.sh and utscript4.sh .After that write script not found and just rebot.Help pls.
Dear Members, I have a Cherry Tablet with no model number on it and now it is not working anymore ... It just stucks on the android logo and dont mover further. I try to reset it by pressing power key + Vloume up key but in that case it only show "" press power again with in 10 seconds to system recovery mode"" and then it shows repairing android logo and then again come on the same android logo and nothing happens. I need to know how can i find out its firmware or how can i root it again ?? I opened it and find out that it has WM8850 chip inside of it and nothing else i had found ...!
Please help me
Thanks
Hi all, in first sorry for my english.
I have TF300, after some problems with oreginal andorid i upgrade tablet to cyanongenmod 11 and after some time to CM12 , but i hawe big problem with GAPS (crashes on startup) and Wifi (i see all near networks but my private no ) after this i download back CM11 upload inside tablet disk and restart for WIPE and Install.
But after reboot tablet didnt start only loop on TEAMWIN logo. Tablet totaly ignore volume down and power button combo. If you power of they power on self after 5 seconds.
Only if you press volume up after power off tablet didnt start.
For more problem description view this video (i can post full link) youtube.com/watch?v=cHIxJRuWkd4
It is any chance to repair this or is it death ?
Hello everyone,
Today i tried to go into recovery mode, so i shutdown my moto and pressed Power+volumeDown
then i pressed volume down again 3 times or so.. till i got Recoverymode, then it showed no command !!
is there any way to comeback from that ?? or should i wait till the mobile switches off ?
Ufff!! it rebooted Automatically after a while problem solved
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Miticohtc said:
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Click to expand...
Click to collapse
Anyone can help me?
Guys guys Science may have found a solution right now ... will luckily I do not know, however, acts, then taken by anxiety, I did a downgrade of the OS taking it to the first version available from asus website:
https://www.asus.com/it/Phone/ZenFon...Desk_Download/ and download the oldest! that is, the first at the bottom, downloaded the zip file, and insert it in SD, reboot the phone in boot pressed power button and volume +, with selected RECOVERYMOD down key and select it with the power button, go into recovery and select update from SD car, flashed the firmware previously downloaded and placed in SD at the end you do the second wipe data factory and wipe cache, and reboot, there will dawn upgrade the touch, but the startup screen with the set of languages, now do not do anything and restart again, now it appears the annoying firmware upgrade again always with 0% but the screen "press and hold the power button ... etc .." do it and you will see that it will restart the cell, proceed quietly with the set of the options and creating acount, now every time you turn it on or ravviate, will win for a second the annoying pop-ups but the cell will reboot again and will turn on normally, it is not the best solutions but at least you can use your device, I hope I was helpful and let me know
PS SORRY FOR MY BAD ENGLISH
FIX FILE
HI guy this is a solution, download it,insert in SD card,and flash via recovery
https://www.dropbox.com/s/yyfuxude558rbpj/UL-ASUS_Z00D-WW-12.16.4.3-user.zip?dl=0