Related
XFAB Phablet(DAPENG A9230+,PICOPAD 5 GEA) - 5" Android Mobile - Root, CWM and ROMS
Dear Friends,
Good day.
I have own this device, which is from NXG electronics Ltd, India. It is good and I enjoy it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device XFAB PHABLET (MODEL NO - E1808_V75_HJY1A6X_5647)
[*]Brand NXG Electronics Ltd, India
[*]CPU 1GHz Cortex A9 (ARM v7 processor rev 10)
[*]Hardware MT6575
[*]OS Android 4.0 Ice Cream Sandwich
[*]RAM : 512MB
[*]Internal Memory 4GB
[*]Expandable Memory MAX support upto 64GB Class 12 Micro SD Memory Card (TF-Card)
[*]Screen 5.2-inch Capacitive multi-touch screen (5 points), WVGA: 480 x 800, 16 Million Colors
[*]Network Dual SIM Dual Standby, supports WCDMA+EDGE or EDGE+EDGE
[*]2G： Yes (GSM:850/900/1800/1900 MHz)
[*]3G： Yes (2100 MHz)
[*]Built in Sim card Slot (Dual SIM)
[*] Supports GSM/GPRS/EDGE/WCDMA HSPA
[*]GPS Built In A-GPS, supports voice navigation
[*]Connection Bluetooth with EDR & A2DP
[*]Wi-Fi : IEEE 802.11 b/g/n, WiFi Hotspot functionality, Tethering & portable hotspot
[*][ Micro USB 2.0
[*]Camera Dual Camera
[*] Back 8MP with Auto focus and Flash LED
[*] Front 0.3 Mega pixel
[*]Sensor Gravity Sensor, Proximity Sensor, Light Sensor]
[*]Color Black
[*]Video Playback Video playback and recording, supported formats: 3GPP, MP4, 720P(1280 x 720)
[*]Video Formats AVI , MP4 , FLV , 3GP , MOV , ASF , MPEG , RMVB , etc.
[*]Audio MP3 , AAC , WAV , etc. / 3.5 mm Audio jack
[*]Size 147 × 86 × 9.7 mm
[*]Weight 165 g
Accessories
Battery : 2800mAh and 180 hours of standby time
(2*2800mAh) 1 Battery Free
Earphone / 3.5 mm Audio Jack
USB Cable
Charger
The following is the Company Website
http://www.nxgelectronics.in/xfab.html
I have attached the screenshots, which were taken from my Xfab.
Device is Very good.
I have used Some Roms from Russian Forum (forum.china-iphone.ru) and posted here.
Developers, Please help here for Custom ROMs
NXG ORIGINAL STOCK ROM here
http://www.nxglabs.in/nxgblog/?p=324
THE FOLLOWING, DO AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY FAILURE DUE TO MISTAKE. BUT WHILE DOING SAFELY, THERE WILL BE NO DEIVCE BRICK
ROOTING:
I rooted through Tpsparky Root. Thanks to Mr.SparkyM3 . I have attached the file for rooting to all friends.
First install the MTK 6575 driver in the system (PC).
Enable 'USB debugging' mode in mobile (settings - developer options)
connect mobile through USB cable to the PC
turn on file copy mode in mobile
Then simply click the bat file and proceed with instructions.
CLOCKWORK MOD RECOVERY
THANKS TO RUSSIAN developer - Mr.Arsenev.
I have attached the link to clockworkmod recovery. But, the file is complete Rom. So, you have to download complete Rom files.
Flash through Smartphone flash tool and Good guide is here - http://bm-smartphone-reviews.blogspot.in/2012/05/mt6575-flashing-tutorial.html
Remove the recovery file from the downloaded Rom files and replace the attached recovery file. I dont know to separetly to flash the recovery. If anybody know, Please help. So, while flashing only select 'Recovery' and follow the 'bm-smartphone' guide. Your downloaded Rom is not waste, because that is 23.07.2012 build. so you can use also that Rom. But anyway stock rom is best.
Link for 23.07.12 build - http://narod.ru/disk/60288821001.67...723_e1808_v75_hjy1a6x__Flashtool_4.0.zip.html
Lewa TWRP recovery - given by Mr.black_cappucino - http://forum.xda-developers.com/showpost.php?p=36880132&postcount=17
you can install as the same method as above (clockworkmod recovery).
or - through Mobileuncle tools.. but I didnt test through Mobileuncle tools. I have attached the mobile uncle tools apk
AXIOO TOUCH RECOVERY - V.2.3.2.3
Works well in Our mobile. It is designed for AXIOO Picopad 5 GEA (Same Our Mobile - Indonesian Brand name is that) by Mr. insane ranting
Thanks to the Expert. Tested by me. 100% working.
Link here - http://www.jfdesignnet.com/?p=2804
Flash through the flash tool, as same as previous methods.
CUSTOM ROM
CUSTOM ICS:
1. Ok.. ICS 4.0.6 (modified as 4.0.6) ,custom ROMs are here
http://forum.china-iphone.ru/viewtopic.php?p=659135#p659135
Use google translate in browser. Because page is in Russian.
It is made by Mr.Alexey arsenev, russian developer for Star N8000. He told that it will match exactly to Dapeng A9230+. So I tried, and it exactly matched.. All tweaks are good. Rom is Very fast. "Awesome Beats" in this Rom is Excellent.. No need to buy Beats headphones.. Medium quality earphones are enough.. So, if you want , try.
2. Mr. black_cappucino' s CUSTOM ICS ROM - http://forum.xda-developers.com/showpost.php?p=36899596&postcount=18
3. GIONEE GN868 ROM (Micromax A90) - Stock ROM works well. has little problems. but we can solve that.
Little problems - we can solve that.
a. no signal - copy 'modem.img' from your stock rom (\system\etc\firmware) into GN868's Rom - same folder and change permissions (rw-r--r--)
b. bluetooth, wifi crashing - copy 'mtk_stp_wmt.ko' from your stock rom (\system\lib\modules) into GN868's Rom - same folder and change permissions (rw-r--r--)
Use your's stock ICS boot.img in the downloaded ROM .
Flash through Recovery.
Done .. Rom will be perfect.
Specialities in this ROM - 1. ICS Onscreen keys. 2. stock launcher with themes..
Link - http://www.romzj.com/index.php?option=com_mobile&task=download&id=4144&from=rom
4. SAMSUNG STYLE ROM - LENOVO A750 - works good in our mobile.
Specialities - Samsung Style ROM, Sony Bravia Engine, Dual Sim dialer.. etc..
works well. wifi problem one thing. for this you copy 'mtk_stp_wmt.ko' from your stock rom (\system\lib\modules) into This Rom - same folder and change permissions (rw-r--r--)
link - http://dl.vmall.com/c0pyvnub9y
Use your stock ics 'boot.img' in the downloaded Rom and flash through recovery.
1. LEWA OS
Link - http://narod.ru/disk/63368595001.b7...2.10.26_v_i9220_mod3rus_orkyz(zp100).zip.html
Flash through Clockworkmod Recovery.
Actually this rom is for 'Haipai I9220' device and It is from Russian Developer.
Credits go to 'Mr.MrorkyZ' - Russian Developer.
1 bug - There is no analog tv.
1.a) - LEWA LATEST BUILD (I tested)
http://disk.yandex.com/public/?hash=iNuFH9XZGuKIDKQiB8/qA3mkmt/zZRlVlRU1jgZptfY=
CREDITS GOES TO MR. SASHAML (RUSSIAN DEVELOPER - forum.china-iphone.ru)
No bugs for me... But there is no analog tv.
I have attached new LEWA BOOT IMAGE (zip file- you have to unzip) made by Mr. Vetal-ok , Russian Developer through my Request. All credits go to him. So replace the lewa boot image in the downloaded Lewa ROM.. means.. you have to unzip the file and replace the boot image, then again you have to make a zip for flashing through recovery..
2. MIUI
MIUI V4 works good in Our device.Only one problem (for me) - There is no analog TV. Firmware is from Haipai i9220 (Russian) forum.
Thanks to Mr.Cepexa and Mr.back37 , Russian Developers for their modified MIUI boot image for Our device.
Thanks to Mr.SashaML, Russian Developer for his MIUI firmware
Firmware Link - http://files.mail.ru/K0QEMD
1. Flash the firmware through clockworkmod Recovery.
2. Flash the 'attached 'dapeng A9230+ MIUI boot image' through clockworkmod recovery.
2.a) MIUI latest build here
http://files.china-iphone.ru/68rus_MIUI_10.12.12_i9220_e1809c_v75_gq1008_9p017.zip
CREDITS GOES TO ISTOMIN36 (RUSSIAN DEVELOPER - forum.china-iphone.ru)
Sorry friends.. the old attached MIUI boot image has camera shot problem.
So dont use. I have attached the new miui boot image .. Use that.
This New boot image also created by Mr.Vetal-ok, Russian developer (forum.china-iphone.ru)
After flashing the downloaded MIUI Rom file, flash the MIUI boot zip file through recovery.
Help please, Any Developer to port the original rom
Hellow Any Developer
Please help. I successfully rooted the device.
But I softbricked my device due to my simple mistake. While using ROM Toolbox lite, I tried to change the font.
I have no problem, while changing the fonts (downloaded through ROM toolbox}, I successfully changed the fonts.
But Yesterday night, I changed the font from local folder of device , Afterthat the device is not booting..Only Android logo.....
So I have to reflash the fimware... Any developer having firmware of this device..... please help..
In service center (chennai, India), also still Firmware not available...
I have seen the firmware topic in the following Russian website.
http://forum.china-iphone.ru/viewtopic.php?f=46&t=20476
But I cant understand clearly, because of unknown language (even using Google translator also)
So, please any Russian mates or Developers or Any Developer , please help.. Because I have no standby mobile..
Thanks.
Please send a mail to NXG - Pune (i am sure they will help you)
Dear Ramsuresh
Please send a mail to NXG-Pune and make a call to them, they will definetly send you firmware link & guide you
By the way
have tried factory reset from Recovery Mode...?
Regards
Arumugam
ramsuresh4 said:
Hellow Any Developer
Please help. I successfully rooted the device.
But I softbricked my device due to my simple mistake. While using ROM Toolbox lite, I tried to change the font.
I have no problem, while changing the fonts (downloaded through ROM toolbox}, I successfully changed the fonts.
But Yesterday night, I changed the font from local folder of device , Afterthat the device is not booting..Only Android logo.....
So I have to reflash the fimware... Any developer having firmware of this device..... please help..
In service center (chennai, India), also still Firmware not available...
I have seen the firmware topic in the following Russian website.
http://forum.china-iphone.ru/viewtopic.php?f=46&t=20476
But I cant understand clearly, because of unknown language (even using Google translator also)
So, please any Russian mates or Developers or Any Developer , please help.. Because I have no standby mobile..
Thanks.
Click to expand...
Click to collapse
I solved my problem myself
UParumugam said:
Dear Ramsuresh
Please send a mail to NXG-Pune and make a call to them, they will definetly send you firmware link & guide you
By the way
have tried factory reset from Recovery Mode...?
Regards
Arumugam
Click to expand...
Click to collapse
Dear friends,
I solved my problem myself. I got firmware from Russian friends and flashed successfully before 2 days. My only little issue is back camera gives inverted shots. I am searching for rear camera driver. Other than everything is well.
After sending mail to NXG , they sent firmware after 4 days. But that firmware gives error (flash scatter file is invalid) and I cant flash the NXG firmware.
hi.just wanna ask..can this recovery.img used in dapeng i9877?
thehaikal said:
hi.just wanna ask..can this recovery.img used in dapeng i9877?
Click to expand...
Click to collapse
hi，This is for Dapeng A9230 ±. I am not sure that this is for your device. Make a nandroid backup of your Rom , Then you can test this recovery.
Sent from my Dapeng A9230± using xda app-developers app
Hit Thanks
Rooting file - 26 downloads, recovery image - 21 downloads.
no one hitting thanks ?
there is an original factory firmware from russia forum come with flashtool, will upload link if anyone need it..
Send from my GT-N7000 using xda premium
e1808_v75_hjy1a6x (build -20120723) on my device with processor speed 1200Mhz..
e1808_v75_hjy1a6x_5647 (build -20120905) run 1001Mhz on my device..
Now using e1808_v75_jbl2_20120807 from N8000 on my device with 1200Mhz speed (kernel & driver remain e1808_v75_hjy1a6x_20120723)
ramsuresh brother, bout the miui rom. can this rom make a video call?
Sorry. There is no video call option presently in the Miui rom for this device. Maybe near future It may come.
Sent from my Dapeng A9230+ using xda app-developers app
Sorry for Very late reply. The above posted Roms are from Russian forum (forum.china-iphone.ru) only.
Sent from my Dapeng A9230+ using xda app-developers app
black_cappucino said:
ramsuresh brother, bout the miui rom. can this rom make a video call?
Click to expand...
Click to collapse
Sorry. There is no video call option presently in the Miui rom for this device. Maybe near future It may come.
Sent from my Dapeng A9230+ using xda app-developers app
alanccs said:
there is an original factory firmware from russia forum come with flashtool, will upload link if anyone need it..
Send from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry for Very late reply. The above posted Roms are from Russian forum (forum.china-iphone.ru) only.
Sent from my Dapeng A9230+ using xda app-developers app
People are simply downloading the files. No thanking mind. Only two persons have thanked me here. I am not a developer. But i have worked hard for this device..
thx for replying broth. maybe another trick for 3g video call? i think to add ics dialer or samsung dialer or something. not yet test, still wanna know your opinion broth.
Lewa TWRP Ported from stok fw
try this twrp broth. full touch. i use this twrp for 2 weeks, no problem, all function normal.
uma_DROID v1.0
uma_DROID v1.0
Custom ROM for Axioo PicoPad 5 (Indonesia)
[ Also Work for DAPENG A9230 - we have same machine]
HI guys, i made this custom rom just for fun. this is for Axioo PicoPad 5 GEA ( Indonesia). Actually have same machine with Dapeng a9230, so maybe you can install it to your device ( Im sure you can). Because i found the rusian stock rom for dapeng, and flash it to my GEA, and work like charm with no single problem on my GEA till now, thats why im sure you can install it to dapeng.
Thats it guys. Please read the information and the how to before you flash this rom. I have no responsibility if you brick your device because flash this rom to your device. Flash and Mod with your own RISK...!!!
- Lewa TWRP & Patch for 2GB System storage/500MB Internal sdcard included.
Code:
[CENTER]uma_DROID 1.0
ROM :
- 20120723_e1808_v75_hjy1a6x fw based
- Stock Axioo boot animation found inside axioo picopad 5 gea on facebook group
- 200dpi
- build.prob tweaked into Samsung galaxy tab 2, so you can install all apps inside market
- Moded Play store for density modifier, so you can change your lcd density to any value you want but you can install all apps inside market
- X-peria Launcher ported (my fav launcher ever)
- Jelly Bean Camera & Gallery found inside axioo picopad 5 gea on facebook group
- Keyboard : android keyboard (ics), X-peria keyboard & Samsung Keypad.
- No Live wallpaper, home screen tips
- No apps like facebook, ym, twitter, etc
- font changed to alex
- battery and wireless icon changed
- usb storage android logo changed to red devil android
- Sonny bravia engine tweak enabled
- better gps configuration for Indonesia
- init.d tweaks for : fast internet browsing, improved battery life, touchscreen more responsiv, little bit kernel tweak, zipalign all apks every boot, improve speed for x-peria launcher.
- build.prob tweaks for : better picture quality, better recording quality, lock launcher to memory, battery life, kernel error check disabled, more more deeper sleep, 3g tweaks, no black screen after call, video streaming, hsupa enabled, android logger disabled, dns tweak from common linux use google dns, & many more.
- default 500mb system and 2gb internal sdcard (use 2gb system storage to get 2gb system storage & 500mb internal sdcard - *zip file included)
- Lewa TWRP included (if you want, flash recovery via spft first or you can install it via mobileuncle after flashing this rom)
how to :
PLEASE BACKUP FIRST. If you brick your gea, i have no responsibilty for that.
PLEASE BACKUP IMEI FIRST. unless you will traped on invalid imei problem.
- download the file, extract it.
if you want, you can flash "2gbsystorage.zip" via recovery to turn your system into 2gb and internal sdcard into 500mb before you flash the custom rom.
inside you will find an archive named "uma_DROID_v1.0.zip". copy it to your sdcard, boot into recovery, and please DONT FORGET TO WIPE DALVIK, CACHE, & WIPE your device unless you will traped inside bootloop.
done.
note : If you want your phone rooted, install the "2gbsystorage.zip" after you flash the ROM, or if you want to flash the "2gbsystorage.zip" before you flash the ROM, you can r00t your phone via rooting tools[/CENTER]
DOWNLOAD :
HERE...!!!
black_cappucino said:
uma_DROID v1.0
Custom ROM for Axioo PicoPad 5 (Indonesia)
[ Also Work for DAPENG A9230 - we have same machine]
HI guys, i make this custom rom just for fun. this is for Axioo PicoPad 5 GEA ( Indonesia). Actually have same machine with Dapeng a9230, so maybe you can install it to your device ( Im sure you can). Because i found the rusian stock rom for dapeng, and flash it to my GEA, and work like charm with no single problem on my GEA till now, thats why im sure you can install it to dapeng.
Thats it guys. Please read the information and the how to before you flash this rom. I have no responsibility if you brick your device because flash this rom to your device. Flash and Mod with your own RISK...!!!
- Lewa TWRP & Patch for 2GB System storage/500MB Internal sdcard included.
Code:
[CENTER]uma_DROID 1.0
ROM :
- 20120723_e1808_v75_hjy1a6x fw based
- Stock Axioo boot animation found inside axioo picopad 5 gea on facebook group
- 200dpi
- build.prob tweaked into Samsung galaxy tab 2, so you can install all apps inside market
- Moded Play store for density modifier, so you can change your lcd density to any value you want but you can install all apps inside market
- X-peria Launcher ported (my fav launcher ever)
- Jelly Bean Camera & Gallery found inside axioo picopad 5 gea on facebook group
- Keyboard : android keyboard (ics), X-peria keyboard & Samsung Keypad.
- No Live wallpaper, home screen tips
- No apps like facebook, ym, twitter, etc
- font changed to alex
- battery and wireless icon changed
- usb storage android logo changed to red devil android
- Sonny bravia engine tweak enabled
- better gps configuration for Indonesia
- init.d tweaks for : fast internet browsing, improved battery life, touchscreen more responsiv, little bit kernel tweak, zipalign all apks every boot, improve speed for x-peria launcher.
- build.prob tweaks for : better picture quality, better recording quality, lock launcher to memory, battery life, kernel error check disabled, more more deeper sleep, 3g tweaks, no black screen after call, video streaming, hsupa enabled, android logger disabled, dns tweak from common linux use google dns, & many more.
- default 500mb system and 2gb internal sdcard (use 2gb system storage to get 2gb system storage & 500mb internal sdcard - *zip file included)
- Lewa TWRP included (if you want, flash recovery via spft first or you can install it via mobileuncle after flashing this rom)
how to :
PLEASE BACKUP FIRST. If you brick your gea, i have no responsibilty for that.
PLEASE BACKUP IMEI FIRST. unless you will traped on invalid imei problem.
- download the file, extract it.
if you want, you can flash "2gbsystorage.zip" via recovery to turn your system into 2gb and internal sdcard into 500mb before you flash the custom rom.
inside you will find an archive named "uma_DROID_v1.0.zip". copy it to your sdcard, boot into recovery, and please DONT FORGET TO WIPE DALVIK, CACHE, & WIPE your device unless you will traped inside bootloop.
done.
note : If you want your phone rooted, install the "2gbsystorage.zip" after you flash the ROM, or if you want to flash the "2gbsystorage.zip" before you flash the ROM, you can r00t your phone via rooting tools[/CENTER]
DOWNLOAD :
HERE...!!!
Click to expand...
Click to collapse
wow,great rom dude,i want to try it..but can you tell me how to back up imei?just in case if i get imei invalid,and what is the lewa twrp??
sorry for my noob,i'm new on this thing..
@Galon123
dude, to back up your imei, your phone must be r00ted. open your root explorer or similiar, go to " /data/nvram/md/NVRAM/NVD_IMEI/ ". You will find a file named "MP0B_001", copy it to your sdcard or maybe pc/laptop for future use. So you can paste it into the same folder, and you get your imei back if in case you traped inside "Invalid Imei" problem.
---------- Post added at 10:44 AM ---------- Previous post was at 10:39 AM ----------
Galon123 said:
wow,great rom dude,i want to try it..but can you tell me how to back up imei?just in case if i get imei invalid,and what is the lewa twrp??
sorry for my noob,i'm new on this thing..
Click to expand...
Click to collapse
black_cappucino said:
@Galon123
dude, to back up your imei, your phone must be r00ted. open your root explorer or similiar, go to " /data/nvram/md/NVRAM/NVD_IMEI/ ". You will find a file named "MP0B_001", copy it to your sdcard or maybe pc/laptop for future use. So you can paste it into the same folder, and you get your imei back if in case you traped inside "Invalid Imei" problem.
Click to expand...
Click to collapse
double post sorry.
Lewa TWRP :
Lewa (TWRP) touch recovery is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface, no more volume rocker or power buttons to mash.
Features:
-Graphical touchscreen interface with buttons and drag-to-scroll!
-Compressed backups that can save you up to 50% disk space
-Ability to choose which partitions to back up and which to restore
-Custom names for backups, rename and delete backups inside recovery
-Install Zip from SD card or internal storage
-Integrated Terminal Emulator
-Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
-Easy one-button cache & dalvik cache clearing after an installation
-Recovery settings are saved to the sdcard and persist through reboots
-File Manager that allows you to move, copy, delete and rename files and change their permissions
-Battery percentage indicator and clock (set your timezone in settings!)
-Power Off option
-Ability to partition SD Card with EXT3 or EXT4
-ADB support
-Detailed logfile
note : copy/paste from here.
Dear Owners,
Discontinued
In this post you can find a multilingual (mainly European) modified rom for the smartphone Lenovo A820.
IMPORTANT NOTE!
The newer phones do not work well with S138 or older kernel (no info about S147).
The sympthom is that the touch screen works on inappropriate way: after the first screenlock it does not work again.
For this reason it is highly recommended that update your kernel if you have got this issue.
The kernel changer to S150 zip can be run from modified recovery (CWM, TWRP, COT, Carliv, etc...).
Note that all the things in this thread you do with your phone can be dangerous. I cannot take responsibility for your phone damage.
So, do it at your own risk.
Before you do anything, I recommend you to save your current ROM (I would say it is mandatory!)
There are many ways to save and I highlight some (links will be added later):
1, for non-rooted phones:
- SP_Flashtool, readback option.
- CWM (or TWRP) backup, if it is available on your phone
2, for rooted phones:
- MTKDroidTools backup
- command line dd-backup
In order to install this ROM, you need to have CWM recovery on your phone.
If you have not got this recovery or you do not know which recovery you have got, you have to read post#3 before you do anything.
If you get error during the installation of the ROM, see post#4.
The restore option of the CWM rcovery is not as good as it could have been expected, so please read post#4 carefuly for CWM restoration issues, tricks.
Update: CWM 6.0.4.0 with S150 stock kernel.
Just to clarify the power-on modes:
Normal phone mode: press the power button
Meta mode: VOLUME DOWN + POWER
Factory mode: VOLUME UP + POWER
Recovery mode: VOLUME DOWN + VOLUME UP + POWER
Consider the warranty issues, you need to backup you rom.
In addition, I always suggest to do a backup before install any new ROM to your phone.
You can do it with CWM recovery in backup menu.
About installation in general.
Pre-requisites: CWM recovery menu installed on your phone. (This ROM can be installed from CWM recovery.)
The ROM file must be saved on your physical SD card.
Enter into CWM recovery.
In CWM recovery you can go up/down with the volume up/down keys. The “enter” is the power button.
Choose the “install zip from SD card” menu item.
Choose the “choose zip from SD card” menu item.
Select the rom you want to install.
Choose “OK” in the menu item.
If you need a detailed explanation of its use, see the tutorial : http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
Right after the ROM installation has been finished, you can install gapps as well, before restart.
Windorws driver installation:
Please do not ask me about it. I use mainly Linux, which is more friendly.
What I did in XP under Virtualbox was:
Downloaded the Lenovo drivers from here: <link>
Manually added the com ports in control panel.
MOD CP4.0
V1
The modified rom has got the stock kernel - Lenovo A820_ydss_S135_130403
This completely changes your phone appearance, your Lenovo UI will be disappeared.
Also Lenovo applications are not integrated to this rom.
It will look like the stock Jelly Bean.
Main features:
-The firmware is rooted.
-Boot logo, boot/shutdown animations and sounds are changed to Lenovo.
-Minimalist appearance and content, for this reason you have to install google applications manually, from CWM recovery <link>. After gapps installation everything works well (many people wants to have mainly Google Play. It do work.)
-Slide unlock.
-Multilingual. For supported languages, see the screenshots.
-The default language/region is Hungarian, but you can easily choose your one.
Known bugs:
- I found was that the charging logo with turned off phone is not proper.
-the camera does not work adequately in video-camera mode.
-the default setting in some of the application is V987.
V2
The modified rom has got the stock kernel - Lenovo A820_S135_130403
The camera was changed to a non-multilingual one. It looked that the black screen in camcorder mode solved.
But after googleapps something went wrong... black screen again.
V3
The modified rom has got the stock kernel - Lenovo A820_S135_130403
In V3 there is not any significant changes (camera app was changed back to the multilingual one), but I modified the gapps, which caused the camcorder issue.
So, for this modified rom you need to use this gapps.
V3 download link: CP4.0-by-cappa72-v3 - dropbox
or
CP4.0-by-cappa72-v3 - 4shared
Bug: Still, the camera has got green lines in the case of playback.
CP4.1
V1
The kernel has changed to A820_YDSS_S130_130324.
The camera application does not generate green bands in playback.
The default language was set to English, default time zone was set to London.
CP4.1-by-cappa72-v1
You can use the googleapps mentioned for CP4.0-v3
CP4.2
V1
The kernel has changed to A820_S138_130419
CP4.2-by-cappa72-v1
Bug list
#3 - CP4.2-v1 - Wen try to choose themes, the laucher is Force Closed (FC) - Settings was modified to resolve this issue.
#4 - CP4.2-v1 - Serial number is 0123456789ABCDEF instead of the original S/N - not a real bug
#5 - CP4.2-v1 - Under the battery level of 15% the SystemUI is Force Closed (FC) - was a user error, when people deleted the necessary ui files.
CP4.3
This release will be the continuation of the 4.2, but with the newest available kernel (S150) and will (plan) contain all the things that are included in the 5.3.
This will not be with Aromainstaller and will contain the gapps.
Hopefully comng within two weeks.
MOD CP5.3
Available now (25.11.2013.)
CP5.3
V1
Change log; what’s new compared to CP4.2
Aromainstaller is used for optional installation possibilities.
- still Jelly Bean 4.1
- kernel is the stock S150
- Modified systemUI by [email protected] (1% battery signal; automatic hide function for non-used sim signal)
- Modified Settings by apeelme (sloving bug #3)
- Baseband is from the stock ROM S150.
- gps.conf is set to EU by default
- apns.xml is modified for Telenor-HU from “net” to “online”
- gps-tracker solver added to build.prop (dalvik.vm.execution-mode=int:fast)
- libvcodecdrv.so replaced to solve green bars in case of video playback.
- updated MobileUncleTools (2.9.5) in case of 3rd party SW.
There is no default ringtone set! Right after the installation you have to set the ringtone, message alert and so on... otherwise your phone will not play sound...
Important feature!
If you have already repartitioned with the script, you can simply install this ROM, it will recognise that the repartition had been done; and you do not have to run "disable internal SD card" script from CWM.
But please note that this function is onyl available with the repartition script; with Meteos rom editor repartitioning this function is not available.
Right after the installatio, there is not any sound set. Nor the ringtone, nor the message an alert. So, you have to set it first.
Available on mediafire : Link
md5sum: 86e241fcac6faf4fa6baf0f9cc4a18a0
Additional possibility:Change of FM radio
The FM radio can be changed back to Lenovo’s one with this script. It was requested by some people due to the fact that Lenovo’s FM radio can work without connecting the earphone.
The link is here. http://data.hu/get/6494163/FM-radio-change.zip
You can install it from CWM recovery, with the same method that you used during the installation of the ROM. This script does not affect any other part of the ROM, but the FM radio.
Repartition
Please DO NOT USE IT for Lenovo-based ROMs. Sometimes it can cause bootloop or other inconvenience.
The repartition of internal memory of the Lenovo A820 phone has been solved already.
With this action youd intednal SD card will be disappeared and will be added to the /data partition.
Before you do anything, make a CWM backup, and save all your data from internal SD card!
The easiest way is to use this CWM script, if you want to have the maximum available size (2,7GB) for the /data partition.
You have to install it from CWM recovery.
After the installation you need to do a factory reset.
After the factory reset, you have to disable your internal SD card, with CWM script.
And then, you can reboot your phone to check if yo have got the new size of /data partition:
settings --> storage
"internal data storage; full capacity 2,7GB"
"internal SD card; full capacity <your physical SD card capacity"
If the above data appear, you have successfully repartitioned you phone's internal memory!
If you want to have your data back, go into CWM recovery, and choose
backup and restore --> advanced restore --> <choose your save> --> Restore data
And then, your data are available again, after the reboot.
Please do not use it, if you do not want to have the 2,7GB of /data partition!
For Lenovo-based ROMs you need to use Meteos-apk for repartition of A820.
Internal/external SD card exchanger
If you want to use your physical SD card as the default one, and still want to use your emmc-SD card (aka internal SD card by default), you can change it by this CWM script.
Important link in summary:
The driver what works is here.
The original stock recovery is here
The autoroot package can be found here.
The preferred CWM is here.
The root script is here, you can install is from CMW, and your phone will be rooted.
The usable Flashtool is here.
The scattel file for Flashtool is here.
Credits:
bgcngm for the base of the ROM (BM1.0 for ZTE V987), and his amazing tutorials
iBotPeaches and brut.all for apktool
dsixda for his ROM kitchen which is really helpfull for easy-deodexing
Koush for his wonderfull CWM recovery
amarullz for his amazing AROMA installer
...and finally to all the devs whose apps, tweaks and scripts I have used on my custom ROMs
Very nice Thanks for your hard work and good luck
CWM recovery
Installing CWM on your phone
You need to install proper drivers to your computer.
Available (ported) CWM recoveries:
With newest kernel:
CWM recovery 6.0.1.2 - S150 - ported from [email protected] ZTE V970 recovery.
CWM recovery 6.0.4.0 - S150 - ported from [email protected] ZTE V967S recovery.
CWM recovery 6.0.1.2 - S138 - ported from [email protected] ZTE V970 recovery.
CWM recovery 6.0.1.2 - S135 - ported from [email protected] ZTE V970 recovery.
Option 1, with SP Flashtool
Download the SP_Flashtool software to your computer. Extract it to a directory, where you want to run it from.
Download the scatter file, which you will need if you want to use SP_Flashtool.
Download the CWM
(5.5.0.4, 6.0.1.2, 6.0.2.8; it is your decision)
Run the SP_Flashtool.
Browse your scatter file.
Choose only the recovery.
Tick the “DA DL all with checksum” (you can find it close to the download button). It is a really important point!
If your phone is connected, let’s disconnect it from the computer.
Turn off your phone. Take the battery out from your phone for 5 sec. Insert the battery to you phone. Keep it still turned off.
In the flashtool press the Download button.
Choose OK to the warning message.
Connect your phone to the computer.
The flashtool will flash the recovery into your phone.
When the green circle appears, wait for 5-10 secs, and the unplug your phone.
If everything went well, you can enter into the recovery menu (see 1st post, power-on modes)
Option 2, on rooted phone, with MobileUncleTools.
Install MobileUncletools 2.8.x or higher from the Play Store.
Save one of the CWM I linked to the root directory of your physical SD card.
- select menuitem Recovery Update. The program will list the available recovery images.
- choose the one, what you want to install
- It asks back: "Are you sure flash recovery!" - Use recovery file: <name of the recovery what you choose previously>. Tap to OK.
- After the flashing process it offers you to reboot into recovery. If you tap OK, it will automatically reboot your phone to recovery. If you tap cancel, you can use your phone as a phone.
- Before you tap to "reboot to recovery", I suggest you to wait approx. 5-10sec.
Use of the CWM.
If you enter into the CWM (6.x.x.x) recovery, the following buttons can be used:
- Power button : “enter”
- Volume down : step down in the menu
- Volume up : step up in the menu
- Soft key “option”: step down in the menu
- Soft key “back” : step back in the menu
In 5.x.x.x you cannot use soft keys, but the physical buttons works on the same way as in the case of 6.x.x.x
CWM restoration
I experienced failures in restoration of the CWM backup.
This was a real surprise for me because I have not faced this issue with other MTK phones.
So, the issue is that the CWM restoration does not work immediately.
In details:
-I saved the stock rom by CWM 6.0.1.2 (CWM was complied by Bruno, and I modified it for A820)
-For checking the restore function, I did a factory reset: the phone stopped working.
-I did the CWM restoration, but still the phone stopped at the boot animation. And stayed it for 15min. I removed the battery then.
In order to solve the issue, the following method was done:
-In the advanced restore I choose the restore /system (only!)
-After restoring the /system I turned off the phone took the battery out, waited 5 secs, inserted the battery back.
-Turning on the phone it worked again with the restored data, BUT the internal SD card was injured! I formatted the internal SD card – with this action I lost all my data that were saved on the internal SD card.
So, please be careful using it! Save your internal SD card data before the CWM restoration!
This was experience in case of all the available CWM (5.5.0.4, 6.0.1.2, 6.0.2.8).
Installation issues
Post#4 troubleshooting
If you cannot install the ROM by an error:
Code:
assert failed: getprop("ro.product.model") == "Lenovo A820"
E:Error in /sdcard/Lenovo-a820-update-CP4.0-v1.zip (status 7)
This is a safety feature, not a bug.
This error message is a warning that you have not got the proper CWM. (Most of the available CWMs are based on ZTE, STAR phones and contain improper model description.
My CWMs contain the proper one, I modified them, so you need to install a CWM I mod for Lenovo A820.
In this case you have to update your CWM to a ported one that I did.
Great!
I would love an multi lingual rom, but for now I just want to root it. (ones it gets delivered that is)
Are there tools specific for this device to root is with out flashing?
Checking out your rom in the meantime. :fingers-crossed:
ebsbow said:
Great!
I would love an multi lingual rom, but for now I just want to root it. (ones it gets delivered that is)
Are there tools specific for this device to root is with out flashing?
Checking out your rom in the meantime. :fingers-crossed:
Click to expand...
Click to collapse
If you have got CWM recovery on your phone (or a chinese one that has got "xx SD yyy ZIP" menuitem), then you can use root-zip, installing it from CWM recovery.
Thanks
Thanks
Where are the screenshots?
please add some screenshots.
deathhand said:
please add some screenshots.
Click to expand...
Click to collapse
I tried to upload some, but the server was down that time.
I will try it again tomorrow.
Thanks for this rom, I flashed it succesfull on the Lenovo A820, it also takes away that terrible skin from Lenovo.
Gapps link
Thnak you for your ROM. I tried it for a couple of hours and there some minor problems that I don´t know if there are rom related.
1. There is no link to the gapps, so I downloaded a random one and I have errors with google search.
2. The videocam record with a green band on one side.
3. The gps is slow, doesn´t pick satellites easily.
4. If you choose automatic time the it always consider that you´re in china. If you choose manually your timezone then it is ok.
Overall it is a very well-done rom and I would keep it for daily use.
Thanks
1. Are you sure you downloaded the Gapps for Android 4.1.x? You should have this gapps version: gapps-jb-20121011-signed, this the right version you should flash. I first flashed the rom and after that the gapps.
I have reproduced your issue and you need to update the Google search app in the playstore, after that the errors are gone.
2. I have reproduced what you reported, I want to try if I can grab the original camera app from Lenovo and see if it still has the issue, but I don't think its a big problem, I bought the phone for someone else, but this issue is not to big, I don't suppose people often record with an smartphone and this rom at least got Dutch in, the original phone firmware was bloated with China Unicom bloatware, Lenovo skin and had no Dutch support.
3. Try GPSfix, ussualy this kinda works, but the MT6577 chip was know for having GPS problems, perhaps its the same with MT6589? But there are many apps out there that can help you fix it.
I think this in a great rom, Lenovo is a big brand in China, so many will choose Lenovo and with this rom you get rid off the terrible lephone skin, I mentioned this rom in my review about this phone
Oh here you got some screenshots.
Feel free to use them in the OP.
Don't know about you but I do use my device a lot for video recording.
I think it is imperative that all basic functions work flawlessly.
The custom rom's with android 4.2 also have an video bug at this time, which is a bit unacceptable.
I'm sure it will be sorted out :victory:
Well yes, but having fully Dutch support is better, you can always flash new update off the custom rom when it get fixed. I only recorded a few time video with my own smartphone.
Lebrija said:
Thnak you for your ROM. I tried it for a couple of hours and there some minor problems that I don´t know if there are rom related.
1. There is no link to the gapps, so I downloaded a random one and I have errors with google search.
2. The videocam record with a green band on one side.
3. The gps is slow, doesn´t pick satellites easily.
4. If you choose automatic time the it always consider that you´re in china. If you choose manually your timezone then it is ok.
Overall it is a very well-done rom and I would keep it for daily use.
Thanks
Click to expand...
Click to collapse
1, I have added the link.
2, Thanks for the feedback, it is really useful to know. The playback contains the green band, the file itself does not.
I changed the kernel to the '130'-one, and now it works with the camera application, and the playback is also correct.
3, You shall try the EPO / A-GPS support for getting it better. Or thy DexterMorganNL's suggestion.
4, I have never faced this issue, but in the new version I set the default time zone to London.
The new one is available, you can see it in the first post.
cappa72 said:
1, I have added the link.
2, Thanks for the feedback, it is really useful to know. The playback contains the green band, the file itself does not.
I changed the kernel to the '130'-one, and now it works with the camera application, and the playback is also correct.
3, You shall try the EPO / A-GPS support for getting it better. Or thy DexterMorganNL's suggestion.
4, I have never faced this issue, but in the new version I set the default time zone to London.
The new one is available, you can see it in the first post.
Click to expand...
Click to collapse
Thank you for your time. I will try the new version. But, why have you used an older kernel?
By the way, with version 3 I also had some problems with the gyroscope when playing Real Racing 3.
Great work
Its great you released the update so fast, you brought us really good work. I think new owner off this phone is going be thankful, they requested me to buy a phone for them while I'm in China, and when I got it it was not fully Dutch supported, had the terrible skin.
So its great have this phone, because this way I can deliver it without the Chinese bloatware and with full Dutch language and ofcourse Google apps.
EDIT
The newest release gives me a black screen after I boot it up after having it flashed, so I have reverted back to your previous release.
OK. I'm ready to weep.
I've previously had a ROM from NeedRom on my A820.
I'd like to give Cappa's ROM a try, but when I try to install from CWM Recovery I hit the Error outlined in Post 4.
I then follow the advice of Post 3... But there are no links to A820-compatible CWM Recovery installations. I found one on a hungarian site linked to Cappa, but all I get is a .img file and no idea how to get that on to my phone.
Can anyone post detailed instructions, or send me to a page (in English) where I can find instructions on how to get the ball rolling so I can use Cappa's ROM?
Thanks.
Google is my friend. Yes. But Google Translate isn't.
TheTen said:
OK. I'm ready to weep.
I've previously had a ROM from NeedRom on my A820.
I'd like to give Cappa's ROM a try, but when I try to install from CWM Recovery I hit the Error outlined in Post 4.
I then follow the advice of Post 3... But there are no links to A820-compatible CWM Recovery installations. I found one on a hungarian site linked to Cappa, but all I get is a .img file and no idea how to get that on to my phone.
Can anyone post detailed instructions, or send me to a page (in English) where I can find instructions on how to get the ball rolling so I can use Cappa's ROM?
Thanks.
Google is my friend. Yes. But Google Translate isn't.
Click to expand...
Click to collapse
Update, I think I sorted it...
Bit of imagination (and could have totally done the wrong thing, but it seems to be making progress...)
I decided to take a known ROM install that I've tested and that works, which has a recovery.img included, and I renamed the recovery.img to recovery_bak. I then renamed my 'new' CWMRecovery image to recovery.img and dumped it in the directory with the ROM data that I got off NeedRom. I loaded up SPFlashTool and loaded the scatter file from that ROM, then deselected every component except 'recovery' and flashed it.
End result is that I have a phone which recovery-boots to the version 6 cappa-modded CWMR which I found on the Hungarian site, and in turn that CWMR has just installed both the required ZIP updates outlined in Post 1, and Cappa's ROM is now sat on my second A820 awaiting setting up...
I hope I did the right thing, and this won't come back to bite me in the ass later... The newer recovery.img was slightly larger than the old one, but I'm assuming that the scatter file isn't about storing specific pieces of the ROM in specific places based on exact size of file, and thus perhaps all things will continue to work swimmingly.
Nexus 7
Android Ver. 4.2.2
for QMobile Noir A9, Fly IQ Trend, Myphone A888, Wiko Cink Peax and Intex Aqua Wonder
Disclaimer:
This is not my work at all. In fact, this port of ROM is made possible by a few faces from Forum Frandroid dot com, and I hope they won't mind posting it here on XDA forum.
You will be installing this ROM at your own risk. I and the developers making it possible will not be held responsible if anything goes wrong. By the way, it is so simple to follow the process so don't worry.
Don't try it on other devices than mentioned above.
Special Thanks to;
1. Qus1 (Russia) for his great work on kernel 3.4.5 for MTK6577
2. jhayd (Philippines) for his porting of the Nexus 7 ROM
3. Google for such a great OS
4. MTK for an amazing hardware
5. Other developers whose work is inside this ROM
How to install:
1. If you are on any other ROM than AOSP 4.2.2 than do a full wipe including Cache, dalvic cache, data and system than install it through custom recovery
2. If you are already on AOSP 4.2.2 then just do a wipe cache and dalvic cache and install
3. after installation is complete, wipe your cache and dalvic cache again and restart the phone and let it install all the required tools
4. Give a big smile to your Nexus 7 :laugh:
Pros:
1. Beautiful animations
2. Lots of free RAM
3. Nexus 7 logo.bin (However, if you are a QMobile user and don't want to change your QMobile logo.bin then after flashing this ROM, download and flash A9 logo.bin from my other thread)
4. New Messaging App
BUGS:
1. Pinkish Camera result when capturing in low light
2. Auto focus bug in video capture (However, it can be somewhat suppressed by Camera Awesome, it has focus lock system)
3. A long pause/ freeze after a phone call (It happens randomly not all the time)
4. Freeze and/ or Restart while adding the widget to lock screen
DOWNLOAD LINK
Patches:
1. GPS might not work so do yourself a favor and copy libagpssupl.so of your 4.1.2 ROM
2. Optimize battery through batterydoctor app and give it root access for CPU optimization. Once fully charged, I can use my phone with normal usage upto 2 days :good:
3. If Play Store or any other app does not work then restart your phone once or twice
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APKL-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF...Bqw4lswfpR6Rsga6xH_pnswIflEgkBfiSIzI[/CENTER]
awesome
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
dr3adl0ckd said:
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
Click to expand...
Click to collapse
Thanks Mate ..links updated again
shanky76 said:
Thanks Mate ..links updated again
Click to expand...
Click to collapse
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
dr3adl0ckd said:
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
Click to expand...
Click to collapse
There are number of changes required . I can send you the changes if you like ...
boot .img .. decompile make the changes for Finger print sensors.
ETc, Lib , Bin , App these are the places where we need to make changes ... not getting enough time to do all these ..I will try once festive season is over in india
Tutorial with video
I want upgrade vivo x3s , but i cant... give me tutorial with video ... because im newbie.
Thsnks......
Sir i'm new in flashing roms and stuff, i have a 4.4.4 Kitkat phone that doesn't have lolipop update, how do i make this my ROM?
how do we download marshmallow for vivo x5pro? the links that are provided they promted you to fill a survey, but when you click on it says error. havent been able to find a way to download the roms for vivo x5 pro. any help please?
shanky76 said:
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APKL-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF... someone port this Funtouch OS to HTC one m7?
Click to expand...
Click to collapse
Can I install this on my vivo y28 ?
My phone SM-J110h How support ViVO rom
kernel version ??
TRIBUTE TO "THE SYMBOL OF KNOWLEDGE : DR. B. R. AMBEDKAR"Here is my 9th ported Rom, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) @itsraj011 (Developer of the Rom).
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MysticOS_v6_by Sachin.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install MysticOS_v6_by Sachin.zip
6) Wipe Cache & Dalvik Cache.
7) Reboot System.
8) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo).
WARNING:I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Custom Boot Logo (by Me)
2)Superb system animations & transitions.
3) Lag less performance.
4) Everything from original Rom is working fine.
5) Official changelog at: http://forum.xda-developers.com/android/development/rom-t3184945
Bugs:
If you find any problem with camera, use a better camera or google camera app from play store.
Bugless...... Report, if you found any.
Download Links:
1) MysticOS_v6 Full ROM
ALL THE BEST GUYS....
SCREENSHOTS:
https://drive.google.com/open?id=0B9c3NsdJ2PscYi1EQ0ZaNGRuX0U
THEMES:[/U]
1) TOUCHWIZ THEME
2) Dark Mystic_v6 Theme
BUG FIXES
sachin.r.fulzele said:
TRIBUTE TO "THE SYMBOL OF KNOWLEDGE : DR. B. R. AMBEDKAR"Here is my 9th ported Rom, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) @itsraj011 (Developer of the Rom).
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MysticOS_v6_by Sachin.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install MysticOS_v6_by Sachin.zip
6) Wipe Cache & Dalvik Cache.
7) Reboot System.
8) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo).
WARNING:I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Custom Boot Logo (by Me)
2)Superb system animations & transitions.
3) Lag less performance.
4) Everything from original Rom is working fine.
5) Official changelog at: http://forum.xda-developers.com/android/development/rom-t3184945
Bugs:
If you find any problem with camera, use a better camera or google camera app from play store.
Bugless...... Report, if you found any.
Download Links:
1) MysticOS_v6 Full ROM : Link to be updated
ALL THE BEST GUYS....
Click to expand...
Click to collapse
Waiting......
Smooth as butter...nice animations. Everything works as expected.. Only Dolby atmos gives an fc.. And sound is very low.. I get loud sound in stock..so no problem in my speaker ... Thanks..
drsarkar said:
Smooth as butter...nice animations. Everything works as expected.. Only Dolby atmos gives an fc.. And sound is very low.. I get loud sound in stock..so no problem in my speaker ... Thanks..
Click to expand...
Click to collapse
Try increasing volume from engg. Mode. I'll provide fix for dolby. Thanks a lot
sachin.r.fulzele said:
Try increasing volume from engg. Mode. I'll provide fix for dolby. Thanks a lot
Click to expand...
Click to collapse
I tried a lot to increase the sound volume in every possible ways ...but failed. So please help by providing any patch.. Thanks.
Bro after mysticos v6 my phone ui behaving as tablet ui ( resolution,keybord etc)
https://drive.google.com/folderview?id=0B1xm_yNK0pydMG9xNy03M0tiaGs&usp=sharing
Dolby Zip
sachin.r.fulzele said:
Try increasing volume from engg. Mode. I'll provide fix for dolby. Thanks a lot
Click to expand...
Click to collapse
Dear Sachin I found a flashable dolby zip which works in this rom. Please review.. There is an uninstaller flashable zip also... Thanks..
iaditya91 said:
Bro after mysticos v6 my phone ui behaving as tablet ui ( resolution,keybord etc)
https://drive.google.com/folderview?id=0B1xm_yNK0pydMG9xNy03M0tiaGs&usp=sharing
Click to expand...
Click to collapse
Please follow the steps as given............. go to settings.. Mystic Fibres..Mystic settings...System..LCD Density.. change to preset value..480... reboot...done.
drsarkar said:
Please follow the steps as given............. go to settings.. Mystic Fibres..Mystic settings...System..LCD Density.. change to preset value..480... reboot...done.
Click to expand...
Click to collapse
bro it recovered upto some extent but screen size is to small.......
https://drive.google.com/folderview?id=0B1xm_yNK0pydNmVGOXBUb3h1ek0&usp=sharing
iaditya91 said:
bro it recovered upto some extent but screen size is to small.......
https://drive.google.com/folderview?id=0B1xm_yNK0pydNmVGOXBUb3h1ek0&usp=sharing
Click to expand...
Click to collapse
You can change the theme by flashing those given by sachin and see if it improves ...
drsarkar said:
You can change the theme by flashing those given by sachin and see if it improves ...
Click to expand...
Click to collapse
ya i tried mysticos dark theme but no change in size. It only changed icons and dark theme.......
you had no such problem?
iaditya91 said:
Bro after mysticos v6 my phone ui behaving as tablet ui ( resolution,keybord etc)
https://drive.google.com/folderview?id=0B1xm_yNK0pydMG9xNy03M0tiaGs&usp=sharing
Click to expand...
Click to collapse
Change lcd density to 400+ and restart.
iaditya91 said:
ya i tried mysticos dark theme but no change in size. It only changed icons and dark theme.......
you had no such problem?
Click to expand...
Click to collapse
Yes, it's only dark ui. Have you switched to one handed mode?
sachin.r.fulzele said:
Yes, it's only dark ui. Have you switched to one handed mode?
Click to expand...
Click to collapse
No rom directly installed with tablet ui........installed four times but no success.......
So came back to mysticos v4........
iaditya91 said:
No rom directly installed with tablet ui........installed four times but no success.......
So came back to mysticos v4........
Click to expand...
Click to collapse
After setting lcd density, everything is working fine. Have you left any rom data from previous rom??
sachin.r.fulzele said:
After setting lcd density, everything is working fine. Have you left any rom data from previous rom??
Click to expand...
Click to collapse
No, deleted all android data and wiped all data,caches and andriod secure as per your procedure.
I had the same problem...change the LCD density & reboot.....Guess the problem is with Nova launcher...So switch to Now launcher