[Urgent] No carrier / Security Error Urgent Help - Optimus One, P500, V Q&A, Help & Troubleshooting

last year my mobile become hard bricked due to use of KDZ Tools. It was dead. Last month i repaired it through mobile shop. My mobile become alive.. but they send me a mobile which has no IMEI. They said they are unable to restore my IMEI. Luckily i have nv file backup. I used it to restore my IMEI Number. Now everything working fine BUT THERE IS NO CARRIER and showing SECURITY ERROR / EMERGENCY CALLS ONLY error.
I consulted many member's on xda.. some of them said it happened because of faulty nv file.. so i arranged an another nv file from a xda member.
after flashing the ANOTHER NV file... SAME PROBLEM STILL THERE...
i tried to flashed OLD/NEW Baseband and even through flash firmware again through KDZ / LGmdp.
what i did wrong.. guide me please ... :crying:

You need IMEI from a member different than your country. For example, if you are in Romania, consult an Indian/American etc. member here for IMEI

Used one another nv file. I got it through a member. Nv file related to same country, i used it to just verify the problem.
Is there any other reason?

Try flashing the old bb fix after mounting system in recovery...

@warlock911, I had exactly same problem.
You have only two solutions, any other will be unsuccessful.
Believe me I tried everything very deep.
1. Preferred
Find repair shop with special box – VygisToolbox.
Only it can repair security zone and also restore original IMEI.
2. Constrained
I can provide you specific correct fullflash file.
Copy it on usb-drive and go to any repair store.
Tell guys just to write that file via JTAG.
Then problem will gone, BUT you will have not original IMEI.
Writing your NV-backup don't restore your IMEI because security zone block this.
WARNING: changing IMEI can be illegal in your country!

Bonoboo said:
@warlock911, I had exactly same problem.
You have only two solutions, any other will be unsuccessful.
Believe me I tried everything very deep.
1. Preferred
Find repair shop with special box – VygisToolbox.
Only it can repair security zone and also restore original IMEI.
2. Constrained
I can provide you specific correct fullflash file.
Copy it on usb-drive and go to any repair store.
Tell guys just to write that file via JTAG.
Then problem will gone, BUT you will have not original IMEI.
Writing your NV-backup don't restore your IMEI because security zone block this.
WARNING: changing IMEI can be illegal in your country!
Click to expand...
Click to collapse
i am still in problem.... can you still provide me fullflash file now??

warlock911 said:
can you still provide me fullflash file now?
Click to expand...
Click to collapse
Link into your PM.
Please, write here about result.

Related

[DEV] N5 efs repair

So for now it will be 2 weeks of this anoying issue that phone radio just disapers, in setting section it just say "radio off", first I thought I am lucky and factory reset helped but as time passed it hapened again againa again..... For now it seems completely shutt off, because nothing bring it up online. I had made diferrent tehnices like bringing phone in diag mode that for some time helped and setting some of nv items to defaults(found default walues in internet), changing radio mode in DFS but as I sad now nothing helps. So I ask someone of you guys for helping hand to share efs partitions efs1 and efs2, to modify them whit mine setting(esn, imei......) to try this last chance. Or I will need to buy other phone as mine dosn't had warranty. And if I succeed I will make universall efs dump without esn, imei, meid... so they can be filled with your stuff.
So I am asking for someone who had twrp backup of efs or can dump booth partitions of unmodifed band N5 D821 international variant. And I can promise I will not use your imei esn and other settings as I can read mine so they aren't damaged. And please if you share it do it with pm as thoose partitions contain your phone radio info and provide radio version who you are using.
P.S if someone had simallar isues and had repaired it please share it
[EDIT]
Please share efs partition I will pay you if it help me because new mb is 190USD and I realy like my phone.
firecode95 said:
So for now it will be 2 weeks of this anoying issue that phone radio just disapers, in setting section it just say "radio off", first I thought I am lucky and factory reset helped but as time passed it hapened again againa again..... For now it seems completely shutt off, because nothing bring it up online. I had made diferrent tehnices like bringing phone in diag mode that for some time helped and setting some of nv items to defaults(found default walues in internet), changing radio mode in DFS but as I sad now nothing helps. So I ask someone of you guys for helping hand to share efs partitions efs1 and efs2, to modify them whit mine setting(esn, imei......) to try this last chance. Or I will need to buy other phone as mine dosn't had warranty. And if I succeed I will make universall efs dump without esn, imei, meid... so they can be filled with your stuff.
So I am asking for someone who had twrp backup of efs or can dump booth partitions of unmodifed band N5 D821 international variant. And I can promise I will not use your imei esn and other settings as I can read mine so they aren't damaged. And please if you share it do it with pm as thoose partitions contain your phone radio info and provide radio version who you are using.
P.S if someone had simallar isues and had repaired it please share it
[EDIT]
Please share efs partition I will pay you if it help me because new mb is 190USD and I realy like my phone.
Click to expand...
Click to collapse
It';s illegal to tamper with this. No one will provide you efs. Send it for repair to LG
rootSU said:
It';s illegal to tamper with this. No one will provide you efs. Send it for repair to LG
Click to expand...
Click to collapse
But as far I now lg don't mess with this they instead of repairing changes motherboard.
firecode95 said:
But as far I now lg don't mess with this they instead of repairing changes motherboard.
Click to expand...
Click to collapse
Ask them.
rootSU said:
Ask them.
Click to expand...
Click to collapse
Maybe you can help me and to guarranty you that I don't keep your efs you can see all what I change throught teamwiever or some other alternative?

[Q] Pls HELP pls! No IMEI=0 ,No network

Please help me! I have lost my IMEI # ,its showing 0 and no network.
Also I have no EFS backup.
Have flashed factory images also downloadgrade to kitkat 4.4.4 with all methods .also flash cache.img of respective factory images. Still no Imei.
I have my nexus5 16gb D820 box with its original Imei etc #s.Please help me out.
Please note: I can access my storage no problem with partition.also its showing baseband version etc.
There are already a lot of threads discussing that topic! Go & search them. If it doesn't help you have to get it repaired by Google/LG.
experience7 said:
There are already a lot of threads discussing that topic! Go & search them. If it doesn't help you have to get it repaired by Google/LG.
Click to expand...
Click to collapse
Unfortunately In my country there is no google/lg service centre.
Tampering with the imei is illegal
There is a software solution at http://android.stackexchange.com/questions/85807/nexus-5-imei-0-how-to-restore-imei
No need in repair shops
mnhs1010 said:
Please help me! I have lost my IMEI # ,its showing 0 and no network.
Also I have no EFS backup.
Have flashed factory images also downloadgrade to kitkat 4.4.4 with all methods .also flash cache.img of respective factory images. Still no Imei.
I have my nexus5 16gb D820 box with its original Imei etc #s.Please help me out.
Please note: I can access my storage no problem with partition.also its showing baseband version etc.
Click to expand...
Click to collapse
explain what you were doing and how you lost you're IMEI. Like people said it's very illegal and also it's extremely hard to remove a IMEI so unless you backed your EFS up. you're out of luck. Next to read the rules and guide's before messing around with your phone. Everyone tells you too make backups before trying their ROMs

MI4C IMEI/Baseband unknown

Hi guys!
Yesterday my firmware update went terribly wrong and now I have a device that states that imei and baseband are unknown, so I my both sim-cards don't work.
I've tried several types of IMEI restoration, but none of them worked.
Unfortunately I don't have any backup for nvram. So, my guess is that there is a problem with EFS partition on the phone.
In QPST NV RF Manager I see my real IMEI from the box, so I guess it is still present, but my baseband doesn't work. Can you please suggest any help on recovering the baseband? Or if it is possible share with me modem backup or nvram backup without IMEI (I've seen on this forum that one guy with Samsung S3 had a kind of the same problem and he was given a working nvram backup without IMEI (IMEI was 0/00)) I can write my IMEI then, if baseband works again. Will appreciate any help.
Send it back. Only the oem is legally able to mess with the IMEI.
zelendel said:
Send it back. Only the oem is legally able to mess with the IMEI.
Click to expand...
Click to collapse
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
landslider said:
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
Click to expand...
Click to collapse
If you restored the file from another device then it won't have the right IMEI.
zelendel said:
If you restored the file from another device then it won't have the right IMEI.
Click to expand...
Click to collapse
It HAS right IMEI, I checked it with the original box. No need to put up an argument about it. Both devices (mine and the one which was backupped and restored from) are working fine, bot have ORIGINAL IMEI numbers and no errors considering networks or MI accounts. So, actually I have no idea what you are trying to tell me.
landslider said:
It HAS right IMEI, I checked it with the original box. No need to put up an argument about it. Both devices (mine and the one which was backupped and restored from) are working fine, bot have ORIGINAL IMEI numbers and no errors considering networks or MI accounts. So, actually I have no idea what you are trying to tell me.
Click to expand...
Click to collapse
I'm not making an argument. I'm trying to figure out how a number which is supposed to be hard coded into the file is then restored by restoring the files from a different device.
As these devices are not sold in the states learning as much as possible is a good thing.
Glad you got it working.
zelendel said:
I'm not making an argument. I'm trying to figure out how a number which is supposed to be hard coded into the file is then restored by restoring the files from a different device.
As these devices are not sold in the states learning as much as possible is a good thing.
Glad you got it working.
Click to expand...
Click to collapse
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
landslider said:
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
Click to expand...
Click to collapse
It is almost the same with a few exceptions. One being that their devices are banned from all people that work for the government, sometimes they get stopped at customs due to copyright issues and with the latest news about them coming loaded with malware, most won't buy them.
That makes sense in a way. Not sure why a factory reset would mess up that part of the device as it shouldn't touch it.
Thanks for the info.
zelendel said:
Not sure why a factory reset would mess up that part of the device as it shouldn't touch it.
Click to expand...
Click to collapse
I don't know either, but it was an unforgettable experience and a lesson to do backups of everything.
Hi @landslider, what's up friend? I have the same problem but I have no backup hidden partitions. Could you help me fix my device?
harolete said:
Hi @landslider, what's up friend? I have the same problem but I have no backup hidden partitions. Could you help me fix my device?
Click to expand...
Click to collapse
Hi! Have you tried flashing China developer rom with Miflash?
Second option: Connect to your PC and run QPST according to one of the manuals (in order for your phone to show up as a COM), run RF NV Manager and look up your line 550 NV_IMEI if it is filled with numbers that are the same as on your box (check HEX above them and numbers should resemble yours from box but written in opposite direction, eg: on the box it is XXXX69XXXXX in the QPST it will be 96). So, if your IMEI is at its place than all you need is a working device from someone to make a backup. Backup must be made in newer versions of QPST in *.xqcn format and than restored to your phone with checked box "allow ESN mismatch"
landslider said:
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
Click to expand...
Click to collapse
Could you teach me how to do that? how can i make nvram backup via other mi4c? and how can i put it into my mi4c ?? as i am not good at computer so i need your detailed explanation. I would be very glad if you help me.....
landslider said:
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
Click to expand...
Click to collapse
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
spybit2008 said:
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
Click to expand...
Click to collapse
Hi! Unfortunately no, I can't. I don't have xiaomi mi4c anymore
spybit2008 said:
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
Click to expand...
Click to collapse
http:/ en.miui.com thread-315233-1-1.html (replace whitespaces with slash)
There is a thread in official forum where one guy shares qcn backup. There is also an instruction to restore IMEI and baseband. But It doesn't help for me. Network still unavailable.

Unknown baseband, null imei number and deleted efs files

I am in need of some help. I have a galaxy s7 that the efs files have been deleted, therefore, it wont connect to any network as well as unknown base band. when i type in *#06# mt imei number is null (all zeros). I have tried flashing stock firmware onto the device but that doesnt help. I dont know which combination binary software to install because i dont know the correct pda for the device. i am looking for any help to fix this problem.
note: i have another s7 with all the files i think i need, is there anyway to swap the files into the toher device and have it generate its original imei number ?
impure2live said:
I am in need of some help. I have a galaxy s7 that the efs files have been deleted, therefore, it wont connect to any network as well as unknown base band. when i type in *#06# mt imei number is null (all zeros). I have tried flashing stock firmware onto the device but that doesnt help. I dont know which combination binary software to install because i dont know the correct pda for the device. i am looking for any help to fix this problem.
note: i have another s7 with all the files i think i need, is there anyway to swap the files into the toher device and have it generate its original imei number ?
Click to expand...
Click to collapse
You need a backup of the efs folder of that device. If you never did one using a custom recovery like TWRP you are doomed. I believe that there are boxes like the Octopus one that, if you know the imei of the device they can flash that partition/folder and assign the device its imei once again. I don't know if the official service will be willing or able to fix the imei issue, I would suggest reaching out to them and ask.
Sent from my SM-G930F using Tapatalk

Question Asus Rog5 imei Null No network

I make a software by QFIL - after that imei null
I Have The Box with IMEI but I don't Know how to restore It ??
there any solution to fix the network?
You need to hex edit your IMEI into your QCN file and flash it back to the device. Also from QFIL.
Andrologic said:
You need to hex edit your IMEI into your QCN file and flash it back to the device. Also from QFIL.
Click to expand...
Click to collapse
Can you help me explain how to fix ?
alolbedoo said:
Can you help me explain how to fix ?
Click to expand...
Click to collapse
There are a lot of guides on XDA and elsewhere for the steps. However you need to first secure a working QCN file if you don't have a backup of your own and know the IMEIs in that file, so you can locate and overwrite with your own IMEI. Without that, you won't get far... I don't have a QCN file for this device on hand, maybe someone else here does and an share with you...
Andrologic said:
There are a lot of guides on XDA and elsewhere for the steps. However you need to first secure a working QCN file if you don't have a backup of your own and know the IMEIs in that file, so you can locate and overwrite with your own IMEI. Without that, you won't get far... I don't have a QCN file for this device by hand, maybe someone else here does and an share with you...
Click to expand...
Click to collapse
Thank you for your help I don't have a file QCN A search on the internet found a file name QCN-Patched
But I don't know how to use it
Andrologic said:
There are a lot of guides on XDA and elsewhere for the steps. However you need to first secure a working QCN file if you don't have a backup of your own and know the IMEIs in that file, so you can locate and overwrite with your own IMEI. Without that, you won't get far... I don't have a QCN file for this device on hand, maybe someone else here does and an share with you...
Click to expand...
Click to collapse
Is there a solution to unlock bootloader always Error11003
@Andrologic
Hey! I have been long trying to recover my nulled IMEI on ROG5. Every single tutorial I can find asks for a qcn file along with hex editor to input your box IMEIs. All follows up on my end until I use Qfil to restore a changed qcn file. It only writes till 2% and then phone goes into ramdump screen which means there's some kind of IMEI write protection on device or something like that. Because all other IMEI writing methods fail the phone to same RAM Dump screen. Desperate for some help.
Also there seems to be a problem getting diag mode to work on all stock ROMS. The only way diag mode works is by using ENG factory firmware on my ROG 5 which enables diag mode by default. The Asus_volte_su_fixed apk provided by @twistedumbrella Also doesn't enable diag mode on ROG5.
mhrs_1193 said:
@Andrologic
Hey! I have been long trying to recover my nulled IMEI on ROG5. Every single tutorial I can find asks for a qcn file along with hex editor to input your box IMEIs. All follows up on my end until I use Qfil to restore a changed qcn file. It only writes till 2% and then phone goes into ramdump screen which means there's some kind of IMEI write protection on device or something like that. Because all other IMEI writing methods fail the phone to same RAM Dump screen. Desperate for some help.
Also there seems to be a problem getting diag mode to work on all stock ROMS. The only way diag mode works is by using ENG factory firmware on my ROG 5 which enables diag mode by default. The Asus_volte_su_fixed apk provided by @twistedumbrella Also doesn't enable diag mode on ROG5.
Click to expand...
Click to collapse
Search results for query: AsusVoLTE
forum.xda-developers.com
The fix was to allow it to see your root, nothing more.
twistedumbrella said:
Search results for query: AsusVoLTE
forum.xda-developers.com
The fix was to allow it to see your root, nothing more.
Click to expand...
Click to collapse
ahh ok. So, basically we're stuck with a phone whose diag port can't be opened..
mhrs_1193 said:
ahh ok. So, basically we're stuck with a phone whose diag port can't be opened..
Click to expand...
Click to collapse
Dunno. I wasn't part of how that ended. I think it eventually got figured out.
mhrs_1193 said:
ahh ok. So, basically we're stuck with a phone whose diag port can't be opened..
Click to expand...
Click to collapse
This is not based on my own experience - but it looks like you may have access to write the IMEIs to this device via one of the ASUS Key partitions - in which case you may (or may not) be able to bypass writing QCN altogether.
I forgot the name of the guy who posted it, I believe it was under a CN>WW conversion guide - try to look it up and give it a try...
Andrologic said:
This is not based on my own experience - but it looks like you may have access to write the IMEIs to this device via one of the ASUS Key partitions - in which case you may (or may not) be able to bypass writing QCN altogether.
I forgot the name of the guy who posted it, I believe it was under a CN>WW conversion guide - try to look it up and give it a try...
Click to expand...
Click to collapse
The Imei part was mentioned in the very last part of thhis guide:
Repair ROG Phone 5 ZS673KS through edl firmware, no need to unlock Bootloader to modify COUNTRY CN to WW
These materials can only be used for ROG Phone 5_ZS673KS, and ROG Phone 5S_ZS676KS cannot be used. ROG Phone 5S ZS676KS Please see...
forum.xda-developers.com
Someone tried that for a seperate reason and apparently it changed their IMEI:
Repair ROG Phone 5 ZS673KS through edl firmware, no need to unlock Bootloader to modify COUNTRY CN to WW
These materials can only be used for ROG Phone 5_ZS673KS, and ROG Phone 5S_ZS676KS cannot be used. ROG Phone 5S ZS676KS Please see...
forum.xda-developers.com
Now, When I change the asuskey4 file, My IMEI do appear in the bootloader screen but when phone starts, it goes into a boot loop which stays even if I reflash the ENG firmware or stock firmware and ending in RAM dump screen.
Erasing the modemst1,modemst2 and fsg partitions from the phone does allow to get out of the bootloop. But shows Null Imei in the phone, while showing the IMEI in the bootloader screen.
So, apparently if I cannot restore the qcn file, There's no other way.
But Restoring QCN in ENG factoey firmware using QFIL or QPST only goes till 2% and then fails and phone goes to RAM Dump screen. Which apparently means that the phone has somekind of NV data write or IMEI write protection.
Writing QCN via Qfil goes till 2% then phone turns off and then status goes this 164% after which it shows that:
2022-05-05 08:53:19.685 Subscription ID:1 EFS File:/sd/mru001_ext_Subscription01, Function:NV_Tool_WriteNVsToMobile, Event:3 164%
2022-05-05 08:53:19.686 Done uploading the QCN file: C:\Users\mhrs_\Downloads\Compressed\GenericIMEI\patched.qcn, Sync EFS
2022-05-05 08:53:19.687 Done EFS Sync
2022-05-05 08:53:20.689 Reset Phone
2022-05-05 08:53:24.207 Restore QCN Fail:Restore QCN FailError in QTA.Phone.ModeControl :Error in setting phone mode to MODE_OFFLINE_D_F
2022-05-05 08:53:24.208 Finish Restore QCN
Attached is the log file from Qfil.
After this, phones goes into RamDump screen and when I hard reboot the phone, I can see IMEI changed from Null to 0 but still not my original IMEI :/
using qpst to restore only goes till 4% after which phone gets stuck in Ramdump screen.
Please help me to solve the network problem
alolbedoo said:
Please help me to solve the network problem
Click to expand...
Click to collapse
Searching for a solution myself.
mhrs_1193 said:
Searching for a solution myself.
Click to expand...
Click to collapse
Hi, Guys. I have the same problem since few days... Hope we will find a solution soon.
You cannot use others's qcn file to restore your imei. The imei store in fsg, modemst1, modemst2 also in your qcn file. If you use others qcn then they don't match each other, you'll failed to restore. The key: you need to empty the partition of fsg, modemst1, modemst2 in oder to restore other qcn file, but the system is read only so you cant do anything.

Categories

Resources