Y some pico cant support pll2 oc.
I mean hardware of all pico should be same,then it should work on every rom !!
Also ,devs plz make oc kernel for sense 4 roms by any other method as safe as pll2.It would be very smooth
gauravsaini964 said:
Y some pico cant support pll2 oc.
I mean hardware of all pico should be same,then it should work on every rom !!
Also ,devs plz make oc kernel for sense 4 roms by any other method as safe as pll2.It would be very smooth
Click to expand...
Click to collapse
It depends on kernel i think, cuz i have bootloops on jarvis kernel, but on aries or pandora it works, and btw pandora has a new kernel version for Sense 4.1 rom i think.
limnaln said:
It depends on kernel i think, cuz i have bootloops on jarvis kernel, but on aries or pandora it works, and btw pandora has a new kernel version for Sense 4.1 rom i think.
Click to expand...
Click to collapse
tried all three kernel !!1
gauravsaini964 said:
tried all three kernel !!1
Click to expand...
Click to collapse
Check again your partitions order or try another rom, clean install, i dont know m8.
Related
Hi everyone,I have a sensation xe.
I flash the Bricked's kernel, because the sweep2wake is very cool.But after i flash the kernels into AOKP, everything goes well expect the wifi.I also try RCMix's kernel, and faux's kernel, but same the result.
How could i use the phone without wifi!
I need to flash a kernel for AOKP with a feature like sweep2wake, and the wifi should be work.Can someone help me?
English is not very well, but i try my best to write these
I believe Faux has an AOSP kernel. The ones you tried are Sense based, which is the problem.
Sent from my Sensational Sachiel.
l2icky said:
I believe Faux has an AOSP kernel. The ones you tried are Sense based, which is the problem.
Sent from my Sensational Sachiel.
Click to expand...
Click to collapse
Thanks a lot！I have found Faux's AOSP kernel and the wifi worked althought without sweep2wake. The only way is to way the new version.
vince.liu said:
Thanks a lot！I have found Faux's AOSP kernel and the wifi worked althought without sweep2wake. The only way is to way the new version.
Click to expand...
Click to collapse
I know Faux put Sweep2Wake in his Sense versions. I am spoiled with it as well, you might shoot him a message or post in the thread and ask if a future release for AOSP will have Sweep2Wake.
suggestion, I'm on aokp since build 32...don't use custom kernels, is better with the stock one...more stable...I use it at 1ghz and is ****in' great! no lags at all, even gaming
there is no sweep2wake kernel for aosp at the moment, just wait
throcker said:
suggestion, I'm on aokp since build 32...don't use custom kernels, is better with the stock one...more stable...I use it at 1ghz and is ****in' great! no lags at all, even gaming
there is no sweep2wake kernel for aosp at the moment, just wait
Click to expand...
Click to collapse
Or make it yourself based on the sources that do have it
Sent from my HTC Sensation using XDA
throcker said:
suggestion, I'm on aokp since build 32...don't use custom kernels, is better with the stock one...more stable...I use it at 1ghz and is ****in' great! no lags at all, even gaming
there is no sweep2wake kernel for aosp at the moment, just wait
Click to expand...
Click to collapse
You're right.
Hello frends i am new to htc explore(not new to android).i am using stock indian rom with default kernel.i already rooted my rom.i want a kernel which work in stock rom and have NO bug and support ext partition and overclockable to more than 600mhz.thanks guys.
Welcome, there is no such kernel, mostly they are only 3 kernels for explorer, non of them works fine on stock rom, If you want stock, closest you can do is Ateeq's rom, then to clock it you have to flash yannou's kernel, which has OC but most of the guys sayed that it is fake OC, I think not but....... I'm a noob. So far what I figure out is cranium kernel, whit that you can clock it to 1307 which is fun for a while, but battery is just diyng with full clock. All of them supports ext partition.
Thanks.so cranium kernel work with stock Tom.
I have my doubts, anyway do a backup and try, I'm sure about yannou's and ateeq's they don't work with stock, when I tryed cranium, I've already forgot what stock was, so don't know but nowhere says that it wont, so it's up to you. My doubts are about stock, ti's odexed and that's why I'm not sure will it work corectly.
No kernels work with stock....only on custom roms..
my htc
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
vikasb32 said:
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
Click to expand...
Click to collapse
I personally recommend to try CM9, I've installed it yesterday and I can say there wasn't bugs(oh yeah, there was something, when I used phone in USB storage mode(plugged in to computer) Google Play wasn't working properly, it was force closing on the app startup. But this is nothing).
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
vikasb32 said:
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
Click to expand...
Click to collapse
Sorry, exactly now, I'm using default CM9 kernel, so I can't say that.
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
vikasb32 said:
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
Click to expand...
Click to collapse
I thought it too, but setCPU shows max clock 600Mhz.
zgintasz said:
I thought it too, but setCPU shows max clock 600Mhz.
Click to expand...
Click to collapse
Ok then its not overclockable.i will check.thanks
Oc is not a gud idea..du to hvy battery drain..cm9 with oc is available..but not a stable one...
my htc
Hello people, i wanted to ask whether my htc pico running cm9 will run any of these kernels?
[KERNEL][SENSE GB]*****Cranium Kernel for Htc Explorer
http://forum.xda-developers.com/showthread.php?t=1632895
[KERNEL]Htc Pico/Explorer : OVERCLOCK kernel 2.6.38.6,ext2,3,4
http://forum.xda-developers.com/showthread.php?t=1427307
No.. These wont run, because they are compiled for GingerBread.. You'll need ICS/JB kernels.. :good:
And what about Lirokoas kernel.. Will it work on Cyanogenmod 9.1 ?
Gladiator00 said:
And what about Lirokoas kernel.. Will it work on Cyanogenmod 9.1 ?
Click to expand...
Click to collapse
Which kernel is that?? I must've missed it.. Could you provide a link??
I am using Carbon 4.3 with Aries 3.5 OC kernel with ext2 as file system !!
I am facing problem of random reboot after few minutes of usage !! I cannot run any other OC kernel neither this oc kernel above 767 mhz!!!
Please suggest me what to do !!
gauravsaini964 said:
I am using Carbon 4.3 with Aries 3.5 OC kernel with ext2 as file system !!
I am facing problem of random reboot after few minutes of usage !! I cannot run any other OC kernel neither this oc kernel above 767 mhz!!!
Please suggest me what to do !!
Click to expand...
Click to collapse
Did you install the kernel after flashing the ROM? There are certain instructions to be followed before flashing new kernel on some ROM's.
gauravsaini964 said:
I am using Carbon 4.3 with Aries 3.5 OC kernel with ext2 as file system !!
I am facing problem of random reboot after few minutes of usage !! I cannot run any other OC kernel neither this oc kernel above 767 mhz!!!
Please suggest me what to do !!
Click to expand...
Click to collapse
me neither..some picos can't handle more than 767mhz frequency..reason is unknown.
Hi. How get maximum performance on Pico? I mean fastest ROM and OC kernel (safe, with partition sdcard). I want Cm 10.x and @878MHz (this no needed, i only like ant want it but if you have something with better performance, i will get it )
Don't Compare ROMS!
No offense but, You don't ask which rom is better. I've seen many threads closed due to that kind of question. Developers try very hard to develop a stable rom for our pico & all you do is ask about only the best one without even giving others a try..you should try & decide yourself, it's not that difficult..anyways, using pll2 overclock kernel boosts the performance..there's no other way to improve performance that much.
But some roms is faster and some slower. Some kernels (with pll2 overclocking) giving more performance. I'm asking with which rom and which kernel i will get highest performance. I'm not asking which rom is better
Example:
minimilised rom is faster than unofficial cm 10.2 . Aries kernel on 844MHz giving more performance than pandora @878MHz.
You understand me?
michal16 said:
But some roms is faster and some slower. Some kernels (with pll2 overclocking) giving more performance. I'm asking with which rom and which kernel i will get highest performance. I'm not asking which rom is better
Example:
minimilised rom is faster than unofficial cm 10.2 . Aries kernel on 844MHz giving more performance than pandora @878MHz.
You understand me?
Click to expand...
Click to collapse
I use minicm9 build 4+aries 3.5 oc kernel..smoothest so far..try benchmarks, you'll know the difference.
Affangta said:
I use minicm9 build 4+aries 3.5 oc kernel..smoothest so far..try benchmarks, you'll know the difference.
Click to expand...
Click to collapse
this is what I meant
Build 4? Why not build 7?
Build 4 and 7 not work with aries 3.5 oc kernel ;( help
michal16 said:
this is what I meant
Build 4? Why not build 7?
Build 4 and 7 not work with aries 3.5 oc kernel ;( help
Click to expand...
Click to collapse
build 5,6,7 give weird lags sometimes specially with oc kernel,and there's a benchmark difference too ..that's why I use build 4. Use aries 3.5 by @rcane from minicm9 thread.
Affangta said:
build 5,6,7 give weird lags sometimes specially with oc kernel,and there's a benchmark difference too ..that's why I use build 4. Use aries 3.5 by @rcane from minicm9 thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=46775772&postcount=348
This is it?
michal16 said:
http://forum.xda-developers.com/showpost.php?p=46775772&postcount=348
This is it?
Click to expand...
Click to collapse
yeah, that's the one.
Affangta said:
yeah, that's the one.
Click to expand...
Click to collapse
I have very high battery and ram usage. :crying: how to fix it?
michal16 said:
I have very high battery and ram usage. :crying: how to fix it?
Click to expand...
Click to collapse
use greenify.
Affangta said:
use greenify.
Click to expand...
Click to collapse
What? You mean kernel? I need overclock
michal16 said:
What? You mean kernel? I need overclock
Click to expand...
Click to collapse
it's not a kernel..it's an app.
Affangta said:
use greenify.
Click to expand...
Click to collapse
This app optimizing only user apps. I have high RAM and battery use without my applications.
And i try use screencast. On the video i see only epic laggs :/
Now i use cm10.1 and aries 3.5
anybody know other roms and kernel giving most performance?
Thread Closed - More Info