Hello, I believed I have an issue. Hope it not to serious. My problem is that i can't get passed the ASUS logo Splash screen.
1st: I was one stock jelly bean rooted cwm recovery v6.0.1.2 and decide I wanted to get on to Hydro 3.6 Jellybean (9/17)
2nd I downloaded the ROM wiped cache,delvic and factory reset then installed, didn't install at first so I tried a mirror and then it installed correctly restarted the tablet and here I am.
3rd: Tried clean rom 2.0 still no luck.
Please help I'm 15 and don't wanna break the bad news to my parents.
Ps: I am able to still boot into CWM recovery 6.0.1.2 tried everything nothing working and able to fastboot but cold boot and wipe data don't work and haven't shut off tablet since accident will remain on and charged.
jekovenatinsley said:
Hello, I believed I have an issue. Hope it not to serious. My problem is that i can't get passed the ASUS logo Splash screen.
1st: I was one stock jelly bean rooted cwm recovery v6.0.1.2 and decide I wanted to get on to Hydro 3.6 Jellybean (9/17)
2nd I downloaded the ROM wiped cache,delvic and factory reset then installed, didn't install at first so I tried a mirror and then it installed correctly restarted the tablet and here I am.
3rd: Tried clean rom 2.0 still no luck.
Please help I'm 15 and don't wanna break the bad news to my parents.
Ps: I am able to still boot into CWM recovery 6.0.1.2 tried everything nothing working and able to fastboot but cold boot and wipe data don't work and haven't shut off tablet since accident will remain on and charged.
Click to expand...
Click to collapse
It's just a softbrick. As long as you can get into fastboot you are ok.
I suggest reflashing the stock jellybean rom. You can download it from the asus website.
As for getting it into your device (i dont know if cwm supprots sd cards yet). You can use the adb push commands or you can flash twrp which supprots flashing from the sd card.
Also next time read the rom thread carefully. It specifically says you should use twrp.
Hey man try this, it works for me (Same situation but i'm 17 xD)
1) Download this http://www.mediafire.com/?5diezc69u1b16f8
2)Extract the "recovery1" folder in C:\ drive
3)Plug the tablet to PC and turn it on while pressing VOL- and POWER, then go to the fastboot mode (is the USB symbol)
4)Download from here ( http://support.asus.com/Download.asp...300T&p=20&s=16 ) the WW of US instead of the version of the tablet you have got, the extract the blob file in the "recovery1" folder
5)Open CMD, type cd c:\recovery1 then press enter
6)Type dir to see if all the files are in the folder
7)type this command fastboot -i 0x0B05 flash system blob
8)After is done, type fastboot -i 0x0B05 reboot
9)Enjoy!
If you can't do any of this steps, post here and I will help you
Fixed It!
ZerOMKD said:
It's just a softbrick. As long as you can get into fastboot you are ok.
I suggest reflashing the stock jellybean rom. You can download it from the asus website.
As for getting it into your device (i dont know if cwm supprots sd cards yet). You can use the adb push commands or you can flash twrp which supprots flashing from the sd card.
Also next time read the rom thread carefully. It specifically says you should use twrp.
Click to expand...
Click to collapse
Hey actually like 10 mins after I posted I was able to install Clean Rom.
I formated every partition except sd card in v6.0.1.2 cwm recovery as well as factory reset and wipe dalvik.
Actually I like cwm recovery better and it does support microsd cards now. This is the jb/touch bootloader.
Thanks for the Help anyways.
.
Same problem, when i try to flash JB Hydro 3.6... i stuck into bootloop... i flash the official asus update and it works... But when i try to flash the hydro rom it doesn't work.... Why?
I guess you have the new JellyBean Bootloader... because of that you can only flash ROM's which are made for it...
.
I know... i update from jb ota to hydro... but when i flash the 3.6 i got bootloop... and now i can flash this rom...
Hi guys, Im having a little Problem with my tf300. I've been running Baked 6 rom for a couple months and saw that version 7 was released which is full 4.2.1. Backed up, wiped, flashed, and rebooted.
Got stuck at Asus splash screen. unable to turn device off, it just turns right back on to the splash screen. I am able to hold volume down + power to get into TWRP recovery.
Restored back up, rebooted and still stuck on ASUS screen. Tried another backup with same result
Tried re-downloading rom copying it to external memory card and flashing again, still stuck at asus screen.
I am so lost here, not sure if i should throw this thing out the window, or get on my knees and pray.
any help is greatly appreciated.
I have googled the problem and have seen similar issues, but not anybody that can access recovery and still has the problem.
cavz903 said:
Hi guys, Im having a little Problem with my tf300. I've been running Baked 6 rom for a couple months and saw that version 7 was released which is full 4.2.1. Backed up, wiped, flashed, and rebooted.
Got stuck at Asus splash screen. unable to turn device off, it just turns right back on to the splash screen. I am able to hold volume down + power to get into TWRP recovery.
Restored back up, rebooted and still stuck on ASUS screen. Tried another backup with same result
Tried re-downloading rom copying it to external memory card and flashing again, still stuck at asus screen.
I am so lost here, not sure if i should throw this thing out the window, or get on my knees and pray.
any help is greatly appreciated.
I have googled the problem and have seen similar issues, but not anybody that can access recovery and still has the problem.
Click to expand...
Click to collapse
Are you sure to be still rooted ?
Simply question
If you aren't still root, just root again before to try some rom install
philos64 said:
Are you sure to be still rooted ?
Simply question
If you aren't still root, just root again before to try some rom install
Click to expand...
Click to collapse
sorry for the delay - thanks for the reply.
I dont know how to tell if im rooted from recovery.
So just went ahead and flashed the root file i found here:
http://www.androidgadgematic.com/2012/10/root-asus-transformer-pad-tf300-install-cwm.html
flashed Baked 7 and gapps again with same result.
(however i noticed at first reboot the asus screen shows a quick blue loading bar under center logo. then nothing.)
rebooted into TWRP - wiped - flashed root.zip again - restored backup.......asus screen.
another thing i noticed was when i try to install (flash) anything, it says no md5 found or if i select "force md5 check" it fails.
im a seasoned novice. I've gotten myself out of some sticky jams. but im totally lost here....
cavz903 said:
Hi guys, Im having a little Problem with my tf300. I've been running Baked 6 rom for a couple months and saw that version 7 was released which is full 4.2.1. Backed up, wiped, flashed, and rebooted.
Got stuck at Asus splash screen. unable to turn device off, it just turns right back on to the splash screen. I am able to hold volume down + power to get into TWRP recovery.
Restored back up, rebooted and still stuck on ASUS screen. Tried another backup with same result
Tried re-downloading rom copying it to external memory card and flashing again, still stuck at asus screen.
I am so lost here, not sure if i should throw this thing out the window, or get on my knees and pray.
any help is greatly appreciated.
I have googled the problem and have seen similar issues, but not anybody that can access recovery and still has the problem.
Click to expand...
Click to collapse
I suggest flash latest stock with twrp. You will loose twrp but with a working unit you can fastboot twrp again.
tobdaryl said:
I suggest flash latest stock with twrp. You will loose twrp but with a working unit you can fastboot twrp again.
Click to expand...
Click to collapse
thanks
ive looked around. but cant find a flashable stock download.
i did find a method to flash a blob via fastboot. but i dont know how to tell if i have a WW or a TW sku.(to DL firmware from asus site)
is TW for users in Taiwan? and WW for everybody else world wide?
cavz903 said:
thanks
ive looked around. but cant find a flashable stock download.
i did find a method to flash a blob via fastboot. but i dont know how to tell if i have a WW or a TW sku.(to DL firmware from asus site)
is TW for users in Taiwan? and WW for everybody else world wide?
Click to expand...
Click to collapse
The SKU versions on the asus firmware page, are as follows:
- US = USA
- CN = China
- TW = Taiwan
- WW = Worldwide
- DE = Germany
- JP = Japan
- TB = Belgium, Turkey, Luxembourg
But you can flash US or WW, they are compatible
philos64 said:
The SKU versions on the asus firmware page, are as follows:
- US = USA
- CN = China
- TW = Taiwan
- WW = Worldwide
- DE = Germany
- JP = Japan
- TB = Belgium, Turkey, Luxembourg
But you can flash US or WW, they are compatible
Click to expand...
Click to collapse
ok so, downloaded WW stock firmware from Asus site. flashed blob file via fastboot.
it said it finished "okay"
rebooted and, back at the Asus Screen.
and now i dont have recovery either. any suggestions?
thank you
any other ideas? im lost here... thanks
cavz903 said:
any other ideas? im lost here... thanks
Click to expand...
Click to collapse
This is normal. The stock blob contains stock recovery and is flashed over the recovery you have in place.
Time to reflash your twrp.
tobdaryl said:
This is normal. The stock blob contains stock recovery and is flashed over the recovery you have in place.
Time to reflash your twrp.
Click to expand...
Click to collapse
Ok so i will re-flash twrp via fastboot. but then what!? re-root via an update.zip? and flash a few custom rom? beacuse i am still stuck at the Asus boot screen.
cavz903 said:
Ok so i will re-flash twrp via fastboot. but then what!? re-root via an update.zip? and flash a few custom rom? beacuse i am still stuck at the Asus boot screen.
Click to expand...
Click to collapse
Flash the latest twrp (2.4.1.0). There were issues of using 4.2 and custom recoveries. That was the reason for the last two versions of twrp.
All custom roms here I have checked are pre rooted so the only time I flash root is with a stock rom.
If you were not already using twrp 2.4.1.0 then reflash your stock rom. Earlier versions might not flash the roms properly for 4.2. We need to get working first then you can flash your rom choice.
I hope your version of twrp is less than 2.4.1.0 because if not I'm lost at the moment. I'll be thinking and searching while you play.
Good Luck!
Note: Sorry I should have said twrp 2.4.1.0 JellyBean!
cavz903 said:
Ok so i will re-flash twrp via fastboot. but then what!? re-root via an update.zip? and flash a few custom rom? beacuse i am still stuck at the Asus boot screen.
Click to expand...
Click to collapse
How are you getting the roms onto your device to flash them, the TF300 doesn't have any external memory. Unless there is a way to push the file to the internal sdcard via fastboot, that I'm looking into right now, I dont understand how you are able to flash anything besides .img files or an update.zip.
flukeSG2 said:
How are you getting the roms onto your device to flash them, the TF300 doesn't have any external memory. Unless there is a way to push the file to the internal sdcard via fastboot, that I'm looking into right now, I dont understand how you are able to flash anything besides .img files or an update.zip.
Click to expand...
Click to collapse
Flash recovery with fastboot
fastboot -i 0x0B05 flash recovery recovery.img
fastboot -i 0x0B05 reboot
Note: recovery is in the directory with fastboot on the pc
Flash recovery with adb
adb shell
su
adb push twrp.blob /sdcard/twrp.blob
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4 Then reboot to complete installation.
adb reboot
Note: twrp.blob is in the directory with adb and fastboot on the pc and is copied to the sdcard
Flash recovery with android terminal
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
exit
Note: twrp.blob is on the sdcard
/sdcard as used here is an example – paths to both (internal or external) sdcards change with rom and you need to look at the proper path for the sdcard you wish to use. A root browser is what I use for this.
These are examples for the tf300 there are others.
Red text are actual commands typed!
Maybe this will help to explain the most commonly used methods.
Your internal and external sdcards are normally mounted when your tablet is plugged into your pc
I'm sorry I had to respond!
tobdaryl said:
Flash recovery with fastboot
fastboot -i 0x0B05 flash recovery recovery.img
fastboot -i 0x0B05 reboot
Note: recovery is in the directory with fastboot on the pc
Flash recovery with adb
adb shell
su
adb push twrp.blob /sdcard/twrp.blob
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4 Then reboot to complete installation.
adb reboot
Note: twrp.blob is in the directory with adb and fastboot on the pc and is copied to the sdcard
Flash recovery with android terminal
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
exit
Note: twrp.blob is on the sdcard
/sdcard as used here is an example – paths to both (internal or external) sdcards change with rom and you need to look at the proper path for the sdcard you wish to use. A root browser is what I use for this.
These are examples for the tf300 there are others.
Red text are actual commands typed!
Maybe this will help to explain the most commonly used methods.
Your internal and external sdcards are normally mounted when your tablet is plugged into your pc
I'm sorry I had to respond!
Click to expand...
Click to collapse
I apparently don't have drivers for adb for my tf300t. I have no problem with fastboot. I am able to successfully flash the recovery, but I am unable to push any data to my sdcard.
Without being able to fully boot my tablet, I'm not sure I can even get adb to work? If I install drivers for adb, won't I lose my fastboot capabilities that I currently have? My tablet shows up as a fastboot device in my device manager, would I just open it's properties and select new drivers for it?
My next idea is to get ahold of the system.img, boot.img and recovery.img from a rom to flash from fastboot. I can't seem to find these inside any roms I've downloaded yet, where would I find them? I am thinking I would prefer the latest stock asus rom if possible. I've downloaded the rom from Asus website, unzipped it and no .img files in it. I've also downloaded the rooted stock rom from xda here and also no .img files inside it. Does this even sound plausible, to flash those .img files from inside fastboot to make the tablet boot up?
Edit: Small side question, what exactly is "-i 0x0B05" that for? I seem to be able to accomplish flashing things without that small bit in my commands for example I can just type \fastboot flash recovery recovery.img and that works just fine. So what is that small code?
flukeSG2 said:
I apparently don't have drivers for adb for my tf300t. I have no problem with fastboot. I am able to successfully flash the recovery, but I am unable to push any data to my sdcard.
Since you did not provide data about your situation I looked at your previous posts. Notice the big red line in my signature about WIPE DATA.
I'll try to help but this is a hard one to fix. You have to be willing to keep chipping away till I give or we have success. It can be very frustrating.
Without being able to fully boot my tablet, I'm not sure I can even get adb to work? If I install drivers for adb, won't I lose my fastboot capabilities that I currently have? My tablet shows up as a fastboot device in my device manager, would I just open it's properties and select new drivers for it?
My next idea is to get ahold of the system.img, boot.img and recovery.img from a rom to flash from fastboot. I can't seem to find these inside any roms I've downloaded yet, where would I find them? I am thinking I would prefer the latest stock asus rom if possible. I've downloaded the rom from Asus website, unzipped it and no .img files in it. I've also downloaded the rooted stock rom from xda here and also no .img files inside it. Does this even sound plausible, to flash those .img files from inside fastboot to make the tablet boot up?
Edit: Small side question, what exactly is "-i 0x0B05" that for? I seem to be able to accomplish flashing things without that small bit in my commands for example I can just type \fastboot flash recovery recovery.img and that works just fine. So what is that small code?
Click to expand...
Click to collapse
-i 0x0B05 is an identification provided by google for Asus android products. Each vendor is provided with a number. My tablet does not require it either but some do so we just suggest it to everyone.
I'm skipping everything else you asked for the moment.
Prior to flashing CWM were you on JB or ICS?
Either way we need to replace your non working CWM with twrp (2.4.1.0). Here is the link if you were on JB then flash JB if you were on ICS flash ICS.
tobdaryl said:
-i 0x0B05 is an identification provided by google for Asus android products. Each vendor is provided with a number. My tablet does not require it either but some do so we just suggest it to everyone.
I'm skipping everything else you asked for the moment.
Prior to flashing CWM were you on JB or ICS?
Either way we need to replace your non working CWM with twrp (2.4.1.0). Here is the link if you were on JB then flash JB if you were on ICS flash ICS.
Click to expand...
Click to collapse
Hey I appreciate your help man. I was on CM10 JB 4.1.1, but that was before they required us to have the JB Bootloader, which is where I started to mess up at. I've had CWM since I was running CM10, so when I wiped data, it wasn't from a stock recovery, but I'm guessing that doesn't make a difference. Anyways right now, I'm waiting for the battery to charge up a bit, let it die out last night. I will post as soon as I get TWRP flashed.
flukeSG2 said:
Hey I appreciate your help man. I was on CM10 JB 4.1.1, but that was before they required us to have the JB Bootloader, which is where I started to mess up at. I've had CWM since I was running CM10, so when I wiped data, it wasn't from a stock recovery, but I'm guessing that doesn't make a difference. Anyways right now, I'm waiting for the battery to charge up a bit, let it die out last night. I will post as soon as I get TWRP flashed.
Click to expand...
Click to collapse
Good. While waiting you can download the latest ICS stock 9.4.3.30. You will find it in post 3 of this thread.
So I've got an interesting snag now. I've flashed TWRP 4 times, it never takes. When I boot into recovery, it's still CWM. When I use fastboot, it says it's sending and writing are both ok, but when I reboot into recovery it's still CWM 5.5.0.4.
Edit: I even went as far as to try using the JB version of TWRP, because I was on JB before, just not the 4.2.1 that requires JB bootloader. Still gives me the same result.
Edit 2: I have the stock boot.blob also I just tried flashing, same thing, still got CWM after flashing the blob.
flukeSG2 said:
So I've got an interesting snag now. I've flashed TWRP 4 times, it never takes. When I boot into recovery, it's still CWM. When I use fastboot, it says it's sending and writing are both ok, but when I reboot into recovery it's still CWM 5.5.0.4.
Edit: I even went as far as to try using the JB version of TWRP, because I was on JB before, just not the 4.2.1 that requires JB bootloader. Still gives me the same result.
Edit 2: I have the stock boot.blob also I just tried flashing, same thing, still got CWM after flashing the blob.
Click to expand...
Click to collapse
Your recovery has to be the same as your bootloader. Don't mistake JB in rom name and JB bootloader. They are two different things and if your bootloader is ICS then we need ICS.
OK. Let's see what we have to work with now. Boot into CWM, plug your tablet into your pc and check for adb access.(adb devices)
tobdaryl said:
Your recovery has to be the same as your bootloader. Don't mistake JB in rom name and JB bootloader. They are two different things and if your bootloader is ICS then we need ICS.
OK. Let's see what we have to work with now. Boot into CWM, plug your tablet into your pc and check for adb access.(adb devices)
Click to expand...
Click to collapse
It's not charging fast enough on my pc, so I had to disconnect it and plug it into the wall for awhile again. I can pm you if you'd like when I get it fully charged.
Hi all !
First my apology for the reason of those words. I'm an Android-noob
Well I've Rooted my TF101 with EasyFlasher, it's a good thing, installing RogueXM Touch v1.5.0-R1 Recovery.
I launched an AOKP JB milestone 1 and it was well installed.
But I did a mistake, I didn't done a NAND backup.
Now when I try running my TF101, it starts, and run the AOKP JB Milestone 1, but no keyboard, no configuration, well I'm stuck there. Anyway I reboot in recovery trying install another rom pushing file into it by ADB.
Nothing works
I can't reflash Stock rom, EasyFlasher tall me that's ok but when I boot the TF101 I'm always return under AOKP
I don't know who could I flash the Stock rom to be able to repair this $*%£ tablet
If someone has a clue ?
Thank you
[Q] means you should post it in Q&A.
This is the development forum.
sorry I just realize I'm not in the good forum
Since you cannot boot, there are really only 2 options:
Use ADB when in recovery to unbrick (Push new ROM to flash, use the dd command to install a different recovery) - also, be sure to update to the Naked Drivers for ADB for it to work best.
Use APX mode and EasyFlasher or NVFlash to push the stock ROM or a different recovery.
I HIGHLY recommend using TWRP for recovery, it can see the internal and external microSD (FAT32 only).
Moved to correct board.
frederuco said:
Since you cannot boot, there are really only 2 options:
Use ADB when in recovery to unbrick (Push new ROM to flash, use the dd command to install a different recovery) - also, be sure to update to the Naked Drivers for ADB for it to work best.
Use APX mode and EasyFlasher or NVFlash to push the stock ROM or a different recovery.
I HIGHLY recommend using TWRP for recovery, it can see the internal and external microSD (FAT32 only).
Click to expand...
Click to collapse
Well I did that.
But I had big troubles to win
I flashed ics_92117_WW_stock_EBT_SOS.zip and then the AOKP JB Milestone who's working perfectly
I have a Asus ZenFone 2(Z00A)
I was followed [ROM][5.1.1][OFFICIAL]Paranoid Android-L[08/13/2015][Z00A][ZE551ML] to install Paranoid Android-L on my phone. I did it without unlocking the bootloader and I used Tethered Recovery to get into CWM. I did not know that unlocking the bootloader and UN-Tethered Recovery was a must (I'm a noob).
After bricking the phone I tried to unlock the bootloader and then installing TWRP(from http://daritoca.appspot.com/forum.xda-developers.com/zenfone2/general/congrats-to-bootlocker-unlocked-t3138547 and here)
But instead I erased the stock recovery.
Now I don't have an OS installed in my phone(since I formatted /system), I have no recovery. On Booting the phone starts fastboot.
I Googled a lot and found this How to Recover a Bricked Asus Zenfone 2 Smartphone. Will I be able to recover my phone by following these steps? i.e.
1) Download the latest Stock ROM from the Asus website for my phone.
2) Copy the downloaded Stock ROM to the folder where I installed ADB.
3) Do a Tethered Recovery to get into CWM(Since I don't have any recovery on my phone) and Apply update from ADB.
4) Reboot
Will this work. I'm currently downloading the latest Stock ROM from the Asus website.
Help Please!
SLOVED
Monget said:
For the recovery you just put your phone into Fastboot ! After you open a cmd in the folder) where is your twrp.img(With shift + right click . And you run the command "fastboot flash recovery twrp.img " Your phone should normally react
Click to expand...
Click to collapse
Problem Solved! I downloaded the StockRom, put it into my memory card and flashed it with Temporary CWM Recovery. Thats it!
Then I rooted my phone using Temporary CWM. Installed Busy Box, Xposed and Restored my backed up apps & system settings via Titanium Backup.
My phone is back to normal.
But I Flashed firmware version 2.20.40.59(latest) which currently doesn't support unlocking of bootloader. I'll just wait then flash Paranoid.
Thanks for your help!:good:
Bootloader of 2.20.40.59 Unlocked
Actually, I just unlocked the bootloader of 2.20.40.59 using One-Click bootloader unlock(http://forum.xda-developers.com/zenfone2/general/tool-one-click-bootloader-unlock-root-t3155884/page1)
sammorrison said:
I have a Asus ZenFone 2(Z00A)
I was followed [ROM][5.1.1][OFFICIAL]Paranoid Android-L[08/13/2015][Z00A][ZE551ML] to install Paranoid Android-L on my phone. I did it without unlocking the bootloader and I used Tethered Recovery to get into CWM. I did not know that unlocking the bootloader and UN-Tethered Recovery was a must (I'm a noob).
After bricking the phone I tried to unlock the bootloader and then installing TWRP(from http://daritoca.appspot.com/forum.x...eral/congrats-to-bootlocker-unlocked-t3138547 and here)
But instead I erased the stock recovery.
Now I don't have an OS installed in my phone(since I formatted /system), I have no recovery. On Booting the phone starts fastboot.
I Googled a lot and found this How to Recover a Bricked Asus Zenfone 2 Smartphone. Will I be able to recover my phone by following these steps? i.e.
1) Download the latest Stock ROM from the Asus website for my phone.
2) Copy the downloaded Stock ROM to the folder where I installed ADB.
3) Do a Tethered Recovery to get into CWM(Since I don't have any recovery on my phone) and Apply update from ADB.
4) Reboot
Will this work. I'm currently downloading the latest Stock ROM from the Asus website.
Help Please!
Click to expand...
Click to collapse
Hello, thank you for using XDA Assist.
For best results, please post your question here:
http://forum.xda-developers.com/zenfone2/help/help-post-questions-instead-making-t2997779
That's a help thread specifically for your device.
You'll receive expert advice there.
Good luck!