Hello.. I Try to porting CWM for Samsung Galaxy Tab3 8.0
This CWM already tested on my tablet T311 everything is normal I hope you Like
And I do not know working or No For T310&T315 because i'm can not tested.. You Can Try For Tested and report back me..
"Sorry for my bad English"
(Special Thanks To emwno For Guide and Help Me)
Downloads
CWM Touch
Non-Touch
"For Back To Stock Recovery"
Flash This File Via CWM/TWRP: Stock Recovery
How to Use:
1. Download and Extrack To Your PC
2. Flash File "recovery.tar.md5" Via Odin
How To Root Via CWM
1. Download the zip and place it in the root of your externalsd.
2. Turn off your tablet
3. Go to CWM Recovery. by pressing Power+Vol UP
4. Select instal zip from sdcard > chose zip from sdcard
5. Select the root.zip file.
6. Reboot and done..
For Root Zip File Download Here : http://d-h.st/mVr
Thanks for your hard work. Anyways yours doesn't work for me stuck on setup connection. But the one by emwno did worked. Gonna try again and report back later
Joe-Tech said:
Thanks for your hard work. Anyways yours doesn't work for me stuck on setup connection. But the one by emwno did worked. Gonna try again and report back later
Click to expand...
Click to collapse
can you teel me your series number galaxy tab 3 8.0?
abdoel_046 said:
can you teel me your series number galaxy tab 3 8.0?
Click to expand...
Click to collapse
Is that what you mean? SM-T310
Joe-Tech said:
Is that what you mean? SM-T310
Click to expand...
Click to collapse
maybe not working for T310..
if you can upload for me file "recovery.img" from stock rom T310. I can try to porting special for T310?
Sorry sir didn't have time to uploaded. But this one is actually working, I must say this is the best one right now om my tab 3.8.0 SM-T310. Good work bro
Tks
Work for SM-T315. Good work.
furblue said:
Tks
Work for SM-T315. Good work.
Click to expand...
Click to collapse
Ok thanks bro for the report
Non touch version work so fine. Thanks.
Joe-Tech said:
Sorry sir didn't have time to uploaded. But this one is actually working, I must say this is the best one right now om my tab 3.8.0 SM-T310. Good work bro
Click to expand...
Click to collapse
R u using the touch version?
djjozo said:
R u using the touch version?
Click to expand...
Click to collapse
No im using non touch version and it works pretty good
Can someone make this compatible with the Sm-T210R
Sent from my XT926 using Tapatalk 2
krazyace35 said:
Can someone make this compatible with the Sm-T210R
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
i hope sameone later can porting for T210
Joe-Tech said:
No im using non touch version and it works pretty good
Click to expand...
Click to collapse
I'm using twrp and of course it is touch and it is perfect
OK here's my situation, I had to installed CWM through Odin, However it will not let me install ROOT_SGT3_8.0.zip because it will not mount my extSD card when I boot up into CWM. My SD card is formated into FAT32, It just will not mount my SD...Any Ideas? Can I use a more updated CWM with thisTab? Will any CWM dofor our tabs?
Please help.
EQUiLiiBRiUM said:
OK here's my situation, I had to installed CWM through Odin, However it will not let me install ROOT_SGT3_8.0.zip because it will not mount my extSD card when I boot up into CWM. My SD card is formated into FAT32, It just will not mount my SD...Any Ideas? Can I use a more updated CWM with thisTab? Will any CWM dofor our tabs?
Please help.
Click to expand...
Click to collapse
maybe You can use the others externalsd temporary..
abdoel_046 said:
maybe You can use the others externalsd temporary..
Click to expand...
Click to collapse
you mean the externalSD on the actual device?
just using the on board memory?
EQUiLiiBRiUM said:
you mean the externalSD on the actual device?
just using the on board memory?
Click to expand...
Click to collapse
i mean for temporary you can change the other ExternalSd(micro sd) And Put the file there after your Succes Root You can change again..
(Sorry for bad my english)
I just use the On Board SD and it Worked like a charm but I still cannot get this to read my External SD card... Is it because I am using a 64G card?
I can't put any ROM's on this card cause it wont read which is very Weird and I would like to get it working. Also the Card is not even encrypted
Please Help....
EQUiLiiBRiUM said:
I just use the On Board SD and it Worked like a charm but I still cannot get this to read my External SD card... Is it because I am using a 64G card?
I can't put any ROM's on this card cause it wont read which is very Weird and I would like to get it working. Also the Card is not even encrypted
Please Help....
Click to expand...
Click to collapse
what all CWM recovery Not Working For Your Card 64Gb Cwm Touch Or No Touch Not working To?
Related
Hello XDA-Developers,
is there a CWM recovery for the LTE N8020 outthere?
I didn't find anything.
Marcstefan said:
Hello XDA-Developers,
is there a CWM recovery for the LTE N8020 outthere?
I didn't find anything.
Click to expand...
Click to collapse
Thats a good question,....
Have you tested this CWM:
How to ROOT Galaxy Note 10.1 3G/Wifi! [N8000/N8013/N8010]
Download you Firmware from SamMobile.com ... test the CWM and if it not work Reflash your ROM with the SamMobile Files.... i cant test it because i have an N8000 ... but i want to know if its work too?
I Think it works... because N8000, N8010, N8013 have the same Recovery... So why should the N8020 have another? I think it is the same....
Please give me a Feedback!
Ok, it worked, with the CWM File, great idea.
Marcstefan said:
Ok, it worked, with the CWM File, great idea.
Click to expand...
Click to collapse
thanks for the Feedback! Thats great News !
Have fun with your Note!
Tried this on my 8020. The rooting process (method 2) indicate that all goes well but when booting up it is not rooted. Running JB 4.1.2, any ideas?
Sent from my GT-I9100 using xda app-developers app
alexandoe said:
Tried this on my 8020. The rooting process (method 2) indicate that all goes well but when booting up it is not rooted. Running JB 4.1.2, any ideas?
Click to expand...
Click to collapse
Can you make an Backup over CWM on your N8020?
Root can you make with Chainfires Methode! But work the CWM well by you? Have you acess to your SD Card?
send from the streets......
Darkman_RS said:
Can you make an Backup over CWM on your N8020?
Root can you make with Chainfires Methode! But work the CWM well by you? Have you acess to your SD Card?
send from the streets......
Click to expand...
Click to collapse
I can only access CWM directly after flashing with Odin. When I booting after installing the zip all is normal, no root. If I now try to reboot into CWM I end up in the default bootmenu..
Can not access the internal SD card from CWM, says "canĀ“t open..". Only the external SD card which I formatted in fat32 is accessible..
Now here is a working CWM for the N8020 Device!!
[RECOVERY][N8000/10/13+N8020] Darkman_RS Unofficial CWM Recovery Touch 6.0.2.7
...
Hello XDA-Developers, how can I install twrp recovery in to tab n8020 with odin?
Marcstefan said:
Ok, it worked, with the CWM File, great idea.
Click to expand...
Click to collapse
I only find tutorials of how to jnstall it from app or into recovery mode.
irineugd said:
I only find tutorials of how to jnstall it from app or into recovery mode.
Click to expand...
Click to collapse
Read post one . The bit in Big Red Letters .
Hello I am using Carliv Touch Recovery version 6.0.4.4 with Aroma File Manager Support by CAPTAIN NEMO CWM but in that USB mount storage option is not working means its sdcard is not getting mount . Please help.!!!!!!!!!!!!!!!
Please help or where can i get MTK driver for my a110?
Maddy_a110 said:
Please help or where can i get MTK driver for my a110?
Click to expand...
Click to collapse
That's a bug in that recovery! Flash a normal CWM 6.0.1.2 or some other recovery to get that to work.
ibshar said:
That's a bug in that recovery! Flash a normal CWM 6.0.1.2 or some other recovery to get that to work.
Click to expand...
Click to collapse
Okay ....will try other cwm...and thanks for the reply...:good:
ibshar said:
That's a bug in that recovery! Flash a normal CWM 6.0.1.2 or some other recovery to get that to work.
Click to expand...
Click to collapse
I too get this problem in both philz and cot... so revert back to cwm
any workaround this
TechDroid!! said:
I too get this problem in both philz and cot... so revert back to cwm
any workaround this
Click to expand...
Click to collapse
Workaround is, boot up the phone then mount sd card.
ibshar said:
Workaround is, boot up the phone then mount sd card.
Click to expand...
Click to collapse
ibshar said:
Workaround is, boot up the phone then mount sd card.
Click to expand...
Click to collapse
Will it work dude..means have you tried it??
Maddy_a110 said:
Will it work dude..means have you tried it??
Click to expand...
Click to collapse
Ofcourse it will work.. Once you boot up your phone it doesn;t matter what recovery you have! The Android system will mount it...
Maddy_a110 said:
Please help or where can i get MTK driver for my a110?
Click to expand...
Click to collapse
http://d-h.st/bTf
devanj said:
http://d-h.st/bTf
Click to expand...
Click to collapse
Thnks
ibshar said:
Workaround is, boot up the phone then mount sd card.
Click to expand...
Click to collapse
Hey bro can u give steps for this method...means from where to start and what to do next..it will be really helpful...
STEPS
1. Download correct ODIN Flashable TWRP from here (.tar format) - http://forum.xda-developers.com/showthread.php?t=2494245 - ha3g for Exynos and hlte for Snapdragon Note 3
Chenglu Recovery also available here (Now available for both Exynos and Snapdragon) - http://forum.xda-developers.com/showthread.php?t=2454079
2. Flash TWRP using PDA option in ODIN (AP option in ODIN 3.09)
3. Download SuperSU v1.91 zip file from here - http://forum.xda-developers.com/showthread.php?t=1538053
4. Copy it to your SD card
5. Reboot into Recovery and flash the zip file.
6. Reboot phone and enjoy Root!
Cheers!
Go here for External SD Card bug fix - http://forum.xda-developers.com/showthread.php?t=2607215
stanley08 said:
STEPS
1. Download correct ODIN Flashable TWRP from here (.tar format) - http://forum.xda-developers.com/showthread.php?t=2494245 - ha3g for Exynos and hlte for Snapdragon Note 3
Chenglu Recovery also available here (Snapdragon N9005 ONLY for now) - http://forum.xda-developers.com/showthread.php?t=2454079
2. Flash TWRP using PDA option in ODIN (AP option in ODIN 3.09)
3. Download SuperSU v1.91 zip file from here - http://forum.xda-developers.com/showthread.php?t=1538053
4. Copy it to your SD card
5. Reboot into Recovery and flash the zip file.
6. Reboot phone and enjoy Root!
Cheers!
Go here for External SD Card bug fix - http://forum.xda-developers.com/showthread.php?t=2607215
Click to expand...
Click to collapse
I confirm - exactly these steps are OK.
Daster_x said:
I confirm - exactly these steps are OK.
Click to expand...
Click to collapse
Cheers! Thanks bro!
stanley08 said:
STEPS
1. Download correct ODIN Flashable TWRP from here (.tar format) - http://forum.xda-developers.com/showthread.php?t=2494245 - ha3g for Exynos and hlte for Snapdragon Note 3
Chenglu Recovery also available here (Snapdragon N9005 ONLY for now) - http://forum.xda-developers.com/showthread.php?t=2454079
2. Flash TWRP using PDA option in ODIN (AP option in ODIN 3.09)
3. Download SuperSU v1.91 zip file from here - http://forum.xda-developers.com/showthread.php?t=1538053
4. Copy it to your SD card
5. Reboot into Recovery and flash the zip file.
6. Reboot phone and enjoy Root!
Cheers!
Go here for External SD Card bug fix - http://forum.xda-developers.com/showthread.php?t=2607215
Click to expand...
Click to collapse
Awesome! Will try this right away. But what will happen 'coz I'm already in Kitkat (unrooted). Should I start with step 2? Or should I start all over?
akiaazriel said:
Awesome! Will try this right away. But what will happen 'coz I'm already in Kitkat (unrooted). Should I start with step 2? Or should I start all over?
Click to expand...
Click to collapse
Lol. You need TWRP in Step one mate.
what about knox sir? this will change to 0x1 if we our device still 0x0 after flash twrp.
rizalh75 said:
what about knox sir? this will change to 0x1 if we our device still 0x0 after flash twrp.
Click to expand...
Click to collapse
Yes, as usual. Rooting will trip Kn0x.
stanley08 said:
Yes, as usual. Rooting will trip Kn0x.
Click to expand...
Click to collapse
Thank you sir for clarified this thing. Actually i still thinking want to root or not this SM9005 and good day. :good:
stanley08 said:
Lol. You need TWRP in Step one mate.
Click to expand...
Click to collapse
Well, can't win them all. Will try this over the weekend and see how it goes. Great guide btw. :thumbup:
Sent from my SM-N9005 using Tapatalk
can anyone encrypt + root, or root + encrypt the phone on 4.4.2?
Do I need to remove my sim card and sd card before I start this process? Also where do I save SuperSU? In my external or internal SD?
Akia Azriel said:
Do I need to remove my sim card and sd card before I start this process? Also where do I save SuperSU? In my external or internal SD?
Click to expand...
Click to collapse
No need to remove sd nor sim, and I reccomend to save in the internal sd, wrked fine to me!
Got it. Thanks mate!
Sent from my SM-N9005 using Tapatalk
---------- Post added at 03:24 AM ---------- Previous post was at 02:25 AM ----------
I can't seem to boot into recovery for some reason. It only comes up as:
Recovery Booting:
Recovery is not Seandroid Enforcing.
After a couple of seconds it reboots.
What to I do now?
Akia Azriel said:
Got it. Thanks mate!
Sent from my SM-N9005 using Tapatalk
---------- Post added at 03:24 AM ---------- Previous post was at 02:25 AM ----------
I can't seem to boot into recovery for some reason. It only comes up as:
Recovery Booting:
Recovery is not Seandroid Enforcing.
After a couple of seconds it reboots.
What to I do now?
Click to expand...
Click to collapse
Put SuperSU 1.91 zip in ur 'internal' sd and then flash in TWRP to Root. Then fix the permissions for the external sd card to work properly in the last link of OP. Use 2nd method. dats what worked for me. Cheers!
Actually thanks to this wonderful guide and a little bit of tinkering, I now voided my warranty and loving being rooted. Hahaha. Now any apps i should get? =p
Sent from my SM-N9005 using Tapatalk
Sadly, guys, this method didn't work on my SM-N900. I've tried all listed methods 3 or 4 times, both for chainfire and TWRP, none have rooted my device. TWRP is accessible from recovery, installed the UPDATE-SuperSU-v1.69 file, no go.
Any suggestions?
Thanks.
Cole
cmcole101 said:
Sadly, guys, this method didn't work on my SM-N900. I've tried all listed methods 3 or 4 times, both for chainfire and TWRP, none have rooted my device. TWRP is accessible from recovery, installed the UPDATE-SuperSU-v1.69 file, no go.
Any suggestions?
Thanks.
Cole
Click to expand...
Click to collapse
You need to use SuperSU-v1.91
cmcole101 said:
Sadly, guys, this method didn't work on my SM-N900. I've tried all listed methods 3 or 4 times, both for chainfire and TWRP, none have rooted my device. TWRP is accessible from recovery, installed the UPDATE-SuperSU-v1.69 file, no go.
Any suggestions?
Thanks.
Cole
Click to expand...
Click to collapse
You need to use v1.91 and not 1.69. Get the latest zip from the thread i specified. Cheers.
Akia Azriel said:
Actually thanks to this wonderful guide and a little bit of tinkering, I now voided my warranty and loving being rooted. Hahaha. Now any apps i should get? =p
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Buy Greenify Donate and Titanium Backup Pro key. Nova Launcher Prime too.. Those are the apps I have bought.
donalgodon said:
You need to use SuperSU-v1.91
Click to expand...
Click to collapse
SWEET!! :highfive:
This gave me root!!
Thank you immensely, donalgodon.
cmcole101 said:
SWEET!! :highfive:
This gave me root!!
Thank you immensely, donalgodon.
Click to expand...
Click to collapse
Cheers!
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Ctrterrell said:
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Click to expand...
Click to collapse
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Metabolic12 said:
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Click to expand...
Click to collapse
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Ctrterrell said:
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Click to expand...
Click to collapse
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/H and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Metabolic12 said:
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/G and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Click to expand...
Click to collapse
OK thanks for your help ima try it now and see what happens and let you know
Ctrterrell said:
OK thanks for your help ima try it now and see what happens and let you know
Click to expand...
Click to collapse
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Metabolic12 said:
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Click to expand...
Click to collapse
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Ctrterrell said:
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Click to expand...
Click to collapse
Give me your step by step and I'll see if I can help you.
Well I wipe the data system and cache before I installed the rom then afterwards I installed it then I flashed the kernel and it said something bout permission was removed since it couldn't be installed but I will take a pic from my tablet real fast to show you what I was talking about
Metabolic12 said:
Give me your step by step and I'll see if I can help you.
Click to expand...
Click to collapse
This
I forgot to use Odin lol mybad
Ctrterrell said:
This
Click to expand...
Click to collapse
Try this. Take your external SD card and put it in your tablet. Go to Messi's thread for the max kernel in J7T development and download the boot.img not the boot.tar.md5. Finish the download then extract the zip in your external SD card. Put your SD card in your phone, boot into TWRP. Now mount system, cache, art/dalvik, data and internal storage (you may need to format data to access data) now wipe them. Don't wipe your external SD card, so make sure it's not mounted in TWRP. After the wipe mount your external SD, flash the rom, then flash boot.img and tick Boot not recovery before the flash. Reboot and wait. Let me know if it helped man.
---------- Post added at 08:39 PM ---------- Previous post was at 08:19 PM ----------
Ctrterrell said:
I forgot to use Odin lol mybad
Click to expand...
Click to collapse
If you download the boot.img you won't need Odin. But I prefer flashing tars personally, your choice. It should boot for you bro.
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Ctrterrell said:
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Click to expand...
Click to collapse
Glad you got it bro and no the Wi-Fi doesn't work on any of the 3 versions.
Yeah thanks for everu8amd what else roms have you tried and will I have to always flash that kernel when I try to install a roms on this phone or was that only for the note roms
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
And Reboot I reboot to recovery and advance wipe click dalvic and cliche
mario1634 said:
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
Click to expand...
Click to collapse
Ok ima give it a try In few and see what happens
Have anybody figure out a fix for the camera
mario1634 said:
Have anybody figure out a fix for the camera
Click to expand...
Click to collapse
That's what I was about to ask next I know I was still having problems even when I tried to send a pic it still Would reboot
I'm trying to figure it out now if I get it working I will tell you I get it to stop reboot ever time and now it just force close
Heres is working twrp for A10 cn rom enj
https://drive.google.com/file/d/1-104esJYSRbZfL7rXtC773mgtgfJPQmO/view?usp=drivesdk
Working TWRP as in showing the content of the internal memory card? Because the older version of TWRP used for the Chinese ROM works on the Android 10 rom, with the exception that it cannot access the internal memory card.
Nightpwish said:
Working TWRP as in showing the content of the internal memory card? Because the older version of TWRP used for the Chinese ROM works on the Android 10 rom, with the exception that it cannot access the internal memory card.
Click to expand...
Click to collapse
You need to use an OTG
Yes, I am using one but the fact that we cannot access the internal memory is a bug. OP posted a link to a working recovery, so I wanted to check if it's better than the one I use or the same one..
Nightpwish said:
Yes, I am using one but the fact that we cannot access the internal memory is a bug. OP posted a link to a working recovery, so I wanted to check if it's better than the one I use or the same one..
Click to expand...
Click to collapse
But mine is working fine i can access all storage
Well, that's what I wanted to know.
I'll try it ASAP, thanks a lot.
Nightpwish said:
Yes, I am using one but the fact that we cannot access the internal memory is a bug. OP posted a link to a working recovery, so I wanted to check if it's better than the one I use or the same one..
Click to expand...
Click to collapse
Flash the regular twrp and flash this one it will work
Nightpwish said:
Working TWRP as in showing the content of the internal memory card? Because the older version of TWRP used for the Chinese ROM works on the Android 10 rom, with the exception that it cannot access the internal memory card.
Click to expand...
Click to collapse
I said its working because i am using it everything works i am in a10 chinese rm3s 3.04 rom
Well, I have a RM3, not a RM3s, do you think it would work?
Nightpwish said:
Well, I have a RM3, not a RM3s, do you think it would work?
Click to expand...
Click to collapse
It works
Nightpwish said:
Well, I have a RM3, not a RM3s, do you think it would work?
Click to expand...
Click to collapse
My phone is rm3 but i flashed rm3s rom
walkwitmeinhel said:
My phone is rm3 but i flashed rm3s rom
Click to expand...
Click to collapse
Any particular reason for this? Is the RM3S ROM better?
PS: I need access to your drive for the download...
Dude, the file is in 7z fornat, how do I flash it? The recovery doesn't see it...
Nightwish1976 said:
Dude, the file is in 7z fornat, how do I flash it? The recovery doesn't see it...
Click to expand...
Click to collapse
You need to extract the .img from that
walkwitmeinhel said:
You need to extract the .img from that
Click to expand...
Click to collapse
Alright, so I extract the .img file from the archive and use ADB to overwrite the recovery, right?
Thank you.
Nightwish1976 said:
Alright, so I extract the .img file from the archive and use ADB to overwrite the recovery, right?
Thank you.
Click to expand...
Click to collapse
What rom you are now??
walkwitmeinhel said:
What rom you are now??
Click to expand...
Click to collapse
Android 10 Chinese 3.29.
You flash old twrp and then flash new one
Just flashed it, everything perfect, thank you so much.
Nightwish1976 said:
Just flashed it, everything perfect, thank you so much.
Click to expand...
Click to collapse
Enjoy mate