Related
I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Prophet968 said:
Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Click to expand...
Click to collapse
Question 1,2 and 3.. they are all done through Clockworkmod. Look through the menus you'll see it if you still struggle look on YouTube.
Question 4.. gapps is Google Apps you need to flash this after the ROM to get the play store and all the other standard Google apps.
Question 5.. in your eyes pretty much, it'll look the same but with more features obviously.
Thank you alot!
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Prophet968 said:
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Click to expand...
Click to collapse
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Alright I've got one last dumb question
CdTDroiD said:
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Click to expand...
Click to collapse
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Prophet968 said:
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Click to expand...
Click to collapse
If you did what it said in the instructions *root it, cwm, install custom rom* then after installing the custom rom it has it's own cwm. turn off the phone, turn in back home and press the back and home button together at the same time and it should take you to the rom's cwm. If the phone does a factory reset by pressing the back and home button then you did the installation wrong.
But just in case I'll setup a full instruction for you.
Root your phone.
Which can be done easily, just download this and extract the files: http://www.mediafire.com/?dhdbwflnl1vknx2
once you extract the files put your phone on debugging mode which can be done by going to settings, developer mode, and click usb debug.
once you've done that connect your phone to the pc *make sure it's on charge only* wait for driver installation to finish. once that's done click root. follow instructions on the screen it shouldn't be too hard! after following instructions you should be rooted and have cwm. but to install the recovery go to your apps and find lte 2nd init recovery and then click the top button, agree to super su to use it and you're done with rooting and cwm! now. these files you were talking about, download them and put them on sd which can be done with a file manager. after they've downloaded go to the lte 2nd init and click the bottom button. it will reboot the phone and take you to cwm. While you are in cwm click on the home button to go to external which is the sd, then go to backup and restore, and click backup! this is very important. miss this step and things could go bad. Now all you have to do is follow the instructions you posted yourself and you should be done! if you need any help don't hesitate to message me. I've done this for a long time now.
Whoops forgot to add. the website IS a reliable source. Learned that cause I'm a risk taker and decided to try it out myself. and do not use rom manager or anything like that for recovery. ever. especially on phones that do not have their own recovery mode. also. the CM10 works great in my opinion! But there's a catch. for me at least. even though everything is perfect during phone calls I cannot use my 4g. which is a bad thing for me cause I need it. other than that if that doesn't bother you or anything or don't have service then knock yourself out and install the cm10!
COMPLETED) This mod worked, all things are now finished except one small issue!
So after installing the mod with some great help of someone here on this forums, I've been basically beta testing the mod for a few days. I have nearly no complaints, as almost everything works seemlessly just like you'd except the operating system to. In the end I found one single issue though, which is terribly annoying for me in specific...
My GPS isn't working, which could be one of many things other than the rom. Seeing as I only recognized It yesterday, there may be an outside reason it at random shut off. If anyone know's what can cause this, and a fix for it please comment back!
Thanks to everyone who helped with installing the mod
Check out www.unleashedprepaids.com. have whole section on lg motion custom ROMs help guides everything u need!
Sent from my LG-MS770 using Tapatalk 4
Please help me with the rom
Hey guys not sure if i am suppose to post this here but i couldnt find any where else and i couldnt find an answer with my exact problem, i installed this rom on my moms lg motion and everything went find untill i got to gapps it came up with an error inside of cwm so i just contined all the other flashes i had to do and rebooted i thought that i could just flash gapps later. But i mad a very big booboo i installed the Recovery APK for it in cm 10 i forgot all about pressing reboot and saying reboot into revocovery so i was going to try it though the Recovery APK so i installed the thing and pressed reboot and instead of taking me into recovery it takes me to a screen that says something like "mourning call error" which i dont know what means but i had to take out the battery and turn the phone back on so that worked and i got back to the home screen but i still cant install gapps so she can use all the google sevices i tried rebooting with the built in reboot into recovery (the one that you press reboot when you hold the power button) and that does the same exact thing i have no way of flashing gapps or anything else for that matter can someone please help me i have no idea what to do. everything i working on the phone but that. thank you sorry if i put this in the wrong place.
Confused my droid using this method- would love in on this thread
Sorry if I'm posting in the wrong place-punch me if I have-
I rooted my lgms770 with version f firmware- installed cwm and 2ndinit recovery (2nd init was the only known way (to me anyway) to get into cwm at the time) followed this guide ---
[LgMotion All Things root] and
[GUIDE] Unbrick OR Unroot LG Motion 4G [KDZ] - Android Forums
I am not allowed to post urls yet...sorry...its the the first google hit
I've tried multiple versions of the official LG Firmware flash, from the website, and by following this guide-
AOKP Dirty Unicorns baseless port cm10 - Android Forums Actually, its the unicorns that got me.
With no luck there. I am running Mint16, and had to run the programs through Wine of course, then tried Q4wine, and eventually tried running though Oracle VM, and finally, I wiped my ancient dell of Linux altogether and put WinXP back on it (took 2 hours, that). No cigar. And yes, I did the drivers, all in order, etc, tried again, reinstalled etc
I finally set up adb to try to get into this droid that way, but am having problems with port permissions (I'm going to guess that's on my pc's end-running Mint16)
I can access the factory reset screen (the black and white), download mode, and the battery charges on a black screen with a nice purple font, but I am still stuck in a bootloop. I've employed all known button spamming combos to get back into cwm (there is a nandroid in there somewhere)..but alas...
Help me Obi-Wan-Kenobi's..
Peach
I had the purple letters with no way to get to the factory reset screen i just used the lg online flash tool in upgrade recovery put in the imei of the phone in made sure the phone was in usb download mode then it was fixed but for some odd reason i still cant get my phone to the factory reset option. I apologize sincerely if I wasn't detailed enough if you need any clarification on it then let me know through pm or i could even send u a link to my box folder i keep the install files in.
(Also i have a one click root app for the LGMS770 So if you or anyone would like the link i would be happy to give it to you)
Sent from my MetroPCS LG-MS770 using Tapatalk
Hello,
I recently hopped over from stock to Paranoid Android 4 Beta (0).
This is my first experience messing around with the backend of Android, but I did jailbreak my iPhone a few times, I'd hope that helps my comprehension of all of this.
I currently have the Paranoid OTA installed, and it's telling me there are new versions,
I've downloaded the files and they are on the phone, but whenever I install it restarts and nothing happens. It stays on the current version, I'm doing the
I've been ticking to Backup, wipe the data, cache and dalvik but not the systen.
When it boots back up (it's instant, I'm still on beta(0).
Any help or guidance is appreciated, sorry if this is the wrong place!
phntem said:
Hello,
I recently hopped over from stock to Paranoid Android 4 Beta (0).
This is my first experience messing around with the backend of Android, but I did jailbreak my iPhone a few times, I'd hope that helps my comprehension of all of this.
I currently have the Paranoid OTA installed, and it's telling me there are new versions,
I've downloaded the files and they are on the phone, but whenever I install it restarts and nothing happens. It stays on the current version, I'm doing the
I've been ticking to Backup, wipe the data, cache and dalvik but not the systen.
When it boots back up (it's instant, I'm still on beta(0).
Any help or guidance is appreciated, sorry if this is the wrong place!
Click to expand...
Click to collapse
I´m guessing you have a custom recovery installed?.
Get the latest paranoid update from HERE and the latest gapps from HERE.
Boot into recovery and flash ROM GAPPS and if necessary SuperSU and then reboot. Should work.
lichti1901 said:
I´m guessing you have a custom recovery installed?.
Get the latest paranoid update from [removed] and the latest gapps from [removed]
Boot into recovery and flash ROM GAPPS and if necessary SuperSU and then reboot. Should work.
Click to expand...
Click to collapse
Hi there Litchi,
Thanks for posting.
I'm so bad at this stuff, I used the Nexus Root Toolkit by WugFresh. I really am a bit clueless on what custom recoveries have been installed. What I can tell you is that I have Paranoid Android 4 Beta with the corresponding GAPPS.
I tried doing Clockword Mod for backups but eventually just stopped trying, and used the backup provided in the toolkit (nandroid I think).
I installed the Paranoid OTA hoping that it would take care of me having to do it through my PC again since the drivers were such a mess last time.
Could you just provide a bit more detail as to the steps I'd need to take for that? I hate being so illiterate at this stuff.
Really appreciate any more help you can give! Thanks.
phntem said:
Hi there Litchi,
Thanks for posting.
I'm so bad at this stuff, I used the Nexus Root Toolkit by WugFresh. I really am a bit clueless on what custom recoveries have been installed. What I can tell you is that I have Paranoid Android 4 Beta with the corresponding GAPPS.
I tried doing Clockword Mod for backups but eventually just stopped trying, and used the backup provided in the toolkit (nandroid I think).
I installed the Paranoid OTA hoping that it would take care of me having to do it through my PC again since the drivers were such a mess last time.
Could you just provide a bit more detail as to the steps I'd need to take for that? I hate being so illiterate at this stuff.
Really appreciate any more help you can give! Thanks.
Click to expand...
Click to collapse
You really need to read the sticky at the top of this forum called [FAQ] [REF]★ All you need to know about Android | Read this before you post/root ! ★
It gives you all the information you need to know. We pretty much all here advise against using toolkits for the exact reason in your post, it leaves you knowing nothing about your system, what you have got or the knowledge to use it. These toolkits are seen as a shortcut, but please be aware, there are NO shortcuts
Please read through that thread a few times. Don't flash anything else until you understand the process, what you have got and how to use it. Please don't take this the wrong way but you are not ready to flash things yet. Even if you have already flashed something, there are holes in yoru knowledge that can have disastrous consequences.
rootSU said:
You really need to read the sticky at the top of this forum called [FAQ] [REF]★ All you need to know about Android | Read this before you post/root ! ★
It gives you all the information you need to know. We pretty much all here advise against using toolkits for the exact reason in your post, it leaves you knowing nothing about your system, what you have got or the knowledge to use it. These toolkits are seen as a shortcut, but please be aware, there are NO shortcuts
Please read through that thread a few times. Don't flash anything else until you understand the process, what you have got and how to use it. Please don't take this the wrong way but you are not ready to flash things yet. Even if you have already flashed something, there are holes in yoru knowledge that can have disastrous consequences.
Click to expand...
Click to collapse
None taken,
Thanks for the help SU! I never really checked out this website, but I had seen the name around.
Appreciate the link.
Does anyone know why the Paranoid OTA application ITSELF isn't doing the work for me though?
phntem said:
None taken,
Thanks for the help SU! I never really checked out this website, but I had seen the name around.
Appreciate the link.
Does anyone know why the Paranoid OTA application ITSELF isn't doing the work for me though?
Click to expand...
Click to collapse
It may be an issue with the CWM recovery which is what I assume you have installed with the toolkit, as thats about standard...
In android, /sdcard on the nexus 5 isn't actually an /sdcard. /sdcard is actually /data/media/0 so whenever you are looking in what you think is in /sdcard, you're not... it's /data/media/0. It's been like this since 4.2 Jelly Bean, when multiuser support was added to android. The theory is there will be multiple /sdcards, for each user that logs in. The default user is use "0". With me so far?
Before multi-user support, /sdcard for devices with no physical sdcard, was simply /data/media. Now, CWM never bothered to update it's code to point to /data/media/0, so even today, basic CWM doesn't know the full location of your /sdcard. If the updater downloads the files to /sdcard (which it should), then tells CWM to look in /sdcard for the files to flash, the files cannot be seen because CWM is looking in the wrong place.
Essentially, you should look at ditching CWM and it's antiquated configuration in favour of Philz Recovery or TWRP. Both use /data/media/0 correctly as /sdcard
rootSU said:
It may be an issue with the CWM recovery which is what I assume you have installed with the toolkit, as thats about standard...
In android, /sdcard on the nexus 5 isn't actually an /sdcard. /sdcard is actually /data/media/0 so whenever you are looking in what you think is in /sdcard, you're not... it's /data/media/0. It's been like this since 4.2 Jelly Bean, when multiuser support was added to android. The theory is there will be multiple /sdcards, for each user that logs in. The default user is use "0". With me so far?
Before multi-user support, /sdcard for devices with no physical sdcard, was simply /data/media. Now, CWM never bothered to update it's code to point to /data/media/0, so even today, basic CWM doesn't know the full location of your /sdcard. If the updater downloads the files to /sdcard (which it should), then tells CWM to look in /sdcard for the files to flash, the files cannot be seen because CWM is looking in the wrong place.
Essentially, you should look at ditching CWM and it's antiquated configuration in favour of Philz Recovery or TWRP. Both use /data/media/0 correctly as /sdcard
Click to expand...
Click to collapse
Awesome thanks for the patience and information.
Should I unroot and go back to stock via the toolkit, essentially resetting it all?
That's about the last question I have for you,
Appreciate the help!
phntem said:
Awesome thanks for the patience and information.
Should I unroot and go back to stock via the toolkit, essentially resetting it all?
That's about the last question I have for you,
Appreciate the help!
Click to expand...
Click to collapse
Nope. I would read that thread to understand the process and then download one of the alternative recoveries and get yourself to the point where you can fastboot flash the recovery
phntem said:
Awesome thanks for the patience and information.
Should I unroot and go back to stock via the toolkit, essentially resetting it all?
That's about the last question I have for you,
Appreciate the help!
Click to expand...
Click to collapse
Please forget the toolkit!
The only thing you need is fastboot.
download TWRP or CWM recovery.img and flash it in fastboot. Boot into bootloader, connect the device with usb cable to PC, open cmd in windows and type following:
fastboot devices Enter ... that should give you a number, means your device is connected
fastboot flash recovery nameofrecovery.img Enter .... that will flash the recovery of your choice to your device. Then from bootloader you can select with volume up + down to boot to recovery. Do that - in recovery you can select what you want to do. Flash rom + gapps + supersu and you are ready to go.
Here is a good link for learning how to use fastboot. beginners-guide-on-how-to-setup-and-use-fastboot/
Learning fastboot is highly recommended - its the same what fastboot does, with 1 difference --> you know what you do
HI, I love learning about my phone and wanted to gain root access and have clearly made a HUGE meal of it. I desperately would love some one to explain if I can save be beloved Nexus 5.
When turned on it loads to the 4 colours and just wont go past that stage. I can access recovery mode but it wont mount on my Mac so i can access the SD card.
I'd just be happy to reset my phone now to factory can someone please help me do that!!!!
Thank you VERY much to anyone that could explain to me how....
Recovery doesn't mount storage. Google "adb on mac" then learn to configure adb.
Sent from my Nexus 5 using Tapatalk
It is hard to know the best way to fix your issue, because it isn't really clear what you have done and when the boot looping started. I think that what you need to do is to reflash the factory firmware and that will require you to set up adb and fastboot correctly (as mentioned in the post above). This tutorial and this begginner's guide are probably a good places to start. If you don't understand something, search that thread and look in the "stickies" in Nexus 5 General...if you are still confused go a head and ask in the most appropriate guide thread or in the Nexus 5 Q&A thread.
i highly recommend WUG's nexus root toolkit.
this have saved my ass many times.
http://forum.xda-developers.com/goo...olkit-wugs-nexus-root-toolkit-v1-8-0-t2517778
but you must sort out your ADB problems first.
many ppl have run this on Parallels or WINE, or borrow a PC from somewhere to restore to stock.
Never use toolkits! They tend to do more damage than good.
@thegrapher : Go to stock recovery and do a factory reset and see whether the phone boots or not.. If it doesn't, do what rootSU suggested and setup adb/fastboot on mac and flash the stock factory images!
Thanks heaps guys....really appreciated all the replies. .
Firstly, thanks for the advice i will avoid toolkits in the future.
However...i did manage to sort it out i think. All seems ok so i hope so. Yeah it was loading the google screen showing the padlock on the bottom but the four colours just bounced on and on and nothing... so i couldnt mount it. I could go to recovery (a teamwin logo appeared so i guess that was installed). but in all the options it had nothing on the sd card or didnt appear to after going into every option and clicking mount or sideload. tried to reset it and finally i formatted decrypted data under that option and boom all good. even got it unlocked and working so i guess i found my way eventually.
Would like to know what i did so i can learn but i feel i went about it in such a way i didnt really learn anything. just happy its sorted i guess. and sort proud it is unlocked now i can move that annoying volume bar to the top where it should be!!! lol
hope some of that made sense or can explain what i did. cheers
thegrapher said:
Thanks heaps guys....really appreciated all the replies. .
Firstly, thanks for the advice i will avoid toolkits in the future.
However...i did manage to sort it out i think. All seems ok so i hope so. Yeah it was loading the google screen showing the padlock on the bottom but the four colours just bounced on and on and nothing... so i couldnt mount it. I could go to recovery (a teamwin logo appeared so i guess that was installed). but in all the options it had nothing on the sd card or didnt appear to after going into every option and clicking mount or sideload. tried to reset it and finally i formatted decrypted data under that option and boom all good. even got it unlocked and working so i guess i found my way eventually.
Would like to know what i did so i can learn but i feel i went about it in such a way i didnt really learn anything. just happy its sorted i guess. and sort proud it is unlocked now i can move that annoying volume bar to the top where it should be!!! lol
hope some of that made sense or can explain what i did. cheers
Click to expand...
Click to collapse
Cheers mate!! enjoy N5. boot it manually if required only
Hello, my name is Shagington
I have been slowly unlocking the potential of my tf700t, yet I have come to a point where I am stuck loading the android OS. The problem started when I installed xposed to gain the ability to modify the permission of apps. Now it just sits with the loading circle spinning around and 'round. I tried wiping from the bootloader yet the same thing happens. While looking into the bootloader more, I found twrp installed after what I thought were many failed attempts. I tried a wipe from that as well and the same thing happens. I was thinking about just flashing a stock (rooted) rom with twrp but I am afraid of getting into a worse spot than I already am in, any help is appreciated.
Thanks, Shag
You need to post your bootloader version (read the tiny script when you boot with Power and Volume Down) and your recovery version.
That will determine what you can flash or what type of repair you can try.
Do you have fastboot and adb setup on your PC?
Check if you have a fastboot connection when booted into the bootloader and adb when booted into recovery.
See if you can capture a logcat of the boot process in adb.
Then report back.
Whatever you do, do not use the Wipe Data option from the bootloader!!!!!!!!!
Thank you for the quick reply berndblb, it seems im on build us 10.6.1.14.8-20130514. I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb but I will give it a go tomorrow. Will any custom rom work with the current build i have?
Thanks again, Shagington (Newbington)
shagington said:
Thank you for the quick reply berndblb, it seems im on build us 10.6.1.14.8-20130514. I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb but I will give it a go tomorrow. Will any custom rom work with the current build i have?
Thanks again, Shagington (Newbington)
Click to expand...
Click to collapse
Yes, there are. You are one version behind to the latest (and last) bootloader 10.6.1.14.10. Might be a good idea to update to the latest while you're at it...
Which recovery and version thereof did you flash?
Once we are sure that you have compatible software installed you can flash a bootloader/TWRP package to get you up to date, but let's resolve your current pickle first.
berndblb said:
Yes, there are. You are one version behind to the latest (and last) bootloader 10.6.1.14.10. Might be a good idea to update to the latest while you're at it...
Which recovery and version thereof did you flash?
Once we are sure that you have compatible software installed you can flash a bootloader/TWRP package to get you up to date, but let's resolve your current pickle first.
Click to expand...
Click to collapse
Thanks again for responding good sir, I am on twrp 2.8.5.0, which still loads just fine.
-shagington
When you install xposed it puts an emergency uninstall zip on the internal sdcard partition. Try flashing that from twrp to reverse it out.
Be careful with xposed it can sofbrick easily as you have found out.
shagington said:
I just reformatted my pc to windows 10 tech preview so im not quite sure how that will work with adb
Click to expand...
Click to collapse
I tried the first Win10 preview, and I just had to connect the tablet and run adb.exe - it worked fine with the automatically installed drivers.
Thanks for the replies guys, I couldnt find any zips on my internal, I looked through almost every folder. After looking through the adb tutorials, it is a little to intimidating for me. Kinda sad, I was under the impression that now I have twrp I could just throw some other rom on quickly or even a download a backup from someone else with the same versions to recover and be done with it. I think im just going to leave it soft bricked for a while and use my nexus 7 for now. Appreciate the help guys, it's just a little over my head.
-Shag