Related
very competitive with otterbox, but with grat designing
https://www.case-mate.com/HTC-Desire-HD/Case-Mate-HTC-Desire-HD-Pop-Case.asp
Nice I need to order
Looks very nice indeed! Might have to get one too, to interchange with my Otterbox case.
Though ive got a slight worry that glossy black will scratch like a motherducker in no time.
If anyone gets one can you post some pictures and maybe a video too? Curious to see what that plastic is like. Cheers!
I was gonna go for a casemate tough, but I think I might wait for this, looks very nice.
Just pre-ordered one from here:
http://www.htcdirect.co.uk/index.php?main_page=product_info&cPath=2_12_80&products_id=978
Sent from my Desire HD using XDA App
the back looks great, but too chunky around the screen...
panyan said:
the back looks great, but too chunky around the screen...
Click to expand...
Click to collapse
agree but there is no alternative better
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
bobbyphoenix said:
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
Click to expand...
Click to collapse
Sounds great, be sure to take lots of pictures.
Results are in!
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
bobbyphoenix said:
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
Click to expand...
Click to collapse
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
PeatCoal said:
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
Click to expand...
Click to collapse
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
bobbyphoenix said:
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
Click to expand...
Click to collapse
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
PeatCoal said:
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
Click to expand...
Click to collapse
Well as luck would have it I have one of those on the way too. I'll do the same kind of review when that one comes in. Can you tell I love cases?
bobbyphoenix said:
Can you tell I love cases?
Click to expand...
Click to collapse
..nope
I look forward to it
Nice review ordered mine too just now.
Sent from my Desire HD using XDA App
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
psych0t1c said:
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
Click to expand...
Click to collapse
The shinny black part is very hard plastic, and since the very soft gray part is fused to it, it is really really hard to get in and out. I almost feel like if I push any harder I'm going to break one or the other, but the soft part is just soft enough to get it in there. I don't see how it could get easier over time. It's one of those cases that once it's on, it's on for a long long time. Compared to the OtterBox Commuter case that one seems like it can fall off, and the Pop case seems like it was actually made into the phone, and not to come off without a struggle, but if I had to make a choice I would pick the Pop case 100% of the time. Again if you compare them side by side the OtterBox looks like it was made for a kid to play with, and the Case-Mate one that you buy tickets to see it in a museum. It is that good!
Thanks a lot for the quick reply mate. I was thinking that maybe one could cut or file down one of the plastic ridges that snap into place around the screen to hold the device.
I done that ages ago on a case for a XDA mini, and it worked quite nicely but obviously there is a thin line between making the in and out easier and making the case unusable by cutting in too far...
Again thanks for your input...
...this chunk of zeroes and ones has been generated by flashing a 400 Watt halogen bulb into the open fibres of a transcontinental communications cable...
Thank you for good products to introduce.
http://www.amazon.com/iNcido-Samsung-Galaxy-Trans-Silicon/dp/B004A9XSR4
I never use my keyboard and I was wondering if this case would be better since it makes the phone sturdier by securing the keyboard and maybe make it a little thinner.
Has anyone tried this case or one like it?
thats extraordinarily stupid.
Kitteh298 said:
thats extraordinarily stupid.
Click to expand...
Click to collapse
The only thing stupid was your post. No call to be so rude in response to a simple question. If you dont use the keyboard I say go for it. I've never used one myself.
Sent from my SPH-D700 using Tapatalk
Looks cool....... I wish they had it in Black......
skyheli said:
Looks cool....... I wish they had it in Black......
Click to expand...
Click to collapse
They have one in black: http://www.amazon.com/iNcido-Brand-...ES/ref=sr_1_36?ie=UTF8&qid=1301021620&sr=8-36.
In fact, I think the cheapest option is to get 5 of them lol: http://www.amazon.com/iNcido-Samsun...C8/ref=sr_1_18?ie=UTF8&qid=1301021593&sr=8-18
I'm still on the fence on this, but even if they suck, it's still less than $10 down the drain.
Unfortunately, having just bought one of the black cases above, I can say that it is absolutely, positively, NOT "one-piece". It's a standard 2-piece slider-type case.
Sigh. (sadly tosses one more case onto the growing pile of unloved cases on my dresser)
Case history so far:
Seidio: meh.
Seidio ActiveX: nice hand feel, but a major 5-minute pain to disassemble the phone when the battery dies after 4 hours, and makes it impossible to use the camera button without shaking the phone.
Aluminum Milano: would rock, if it were made from plastic. When it's closed, the phone is rock-solid, and you'd never even know the keyboard is there. Unfortunately, it's aluminum, and has a family tree that clearly began back when Sprint phones still had real antennas. Putting the phone in it instantly nukes at least one bar, makes bluetooth flaky, and renders the GPS unusable under most circumstances. Worse, the metal picks up stray cat hairs and screws up the touchscreen. As the final deathblow, it covers the top part of the touchscreen, so pulling down the window doesn't work. Totally and completely unusable.
Silicone case from this thread: I can't definitively say I hate it, but I'm still bummed out that it actually IS a 2-piece case. That said, it's nicer than I thought silicone-type cases would be and is fairly easy to remove, so I'll probably keep it on for a few days unless it seriously annoys me in some as-yet unforeseen way. However, the sides are totally unsecured, and I have a hunch my back pocket isn't going to be kind to it.
It'll be just my luck that someone will finally come out with a plastic Milano, or a one-piece silicone case, two weeks after I've already bought my next phone in October.
I hear ya brother, why not try one of those skins that protect the phone. I wanna get one but not sure which one.
Sent from my SPH-D700 using XDA App
This case is HORRIBLE.
Its a cheaply cut silicone 2 piece case. With a CHEAP FLIMSY plastic "rail" sliding groove. When I tried to put it on my phone, the plastic rail part broke, and rendered the case useless.
It doesnt fit well, is MUCH to large for the Epic, and feels like cheap silicone.
I returned it to the seller for the $5. Had to pay return shipping too.
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
lafronz said:
Originally Posted by jbadboy2007
Guess no one else realizes this but when the 3g or wifi icon change to a color that is when google is accessing your phone.
Click to expand...
Click to collapse
^--------ROFL!!!!
lafronz said:
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
Click to expand...
Click to collapse
Yeh, but will it make it so you can't feel the flimsy ass screen?
Like the OP, that's all I'm looking for too... I want my phone to feel like it's a nice candy-bar phone, I don't want it to shake and rattle like my screen is about to fall off.
Ordered an Orange one, am looking forward, will review it and lt you know
Sent from my SPH-D700 using XDA App
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Marlinsfan88 said:
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
Click to expand...
Click to collapse
ditto , otterbox commuter. FTW
ive had otterbox's on all my androids( and BBs), moto droid 1 & 2 & global, evo 4g, and my epic with zagg invisia sheild. best protection IMO.
wish they had the pink accents for my girls phone, she cant find a case she likes that doesnt feel cheap, or all the design flakes off.
also , thanks for tip about the side snaps, filed mine down with diamond file, (im a locksmith)
PokeAsheep said:
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Click to expand...
Click to collapse
so its a one piece silicon case? like the blackberry ones?
First of all, sorry if theres an existing topic about this.
Which one suits you? The Defender or the Commuter and why? For me I "think" the Commuter will suit me because I'm not the ones who does it hard , But the downside for me is that Commuter series got a lot of problems, like the rubber part became loose and the hard case often gets a crack without doing anything harsh(e.g: some people broke it while removing the hard case just to clean it, some people said it cracked without doing a thing!). So about the Defender series they said it is very attractive to dust and the screen protector makes the screen difficult to look at sometime, the worse of all is the Bulkiness. So.. Need some opinions here, "Thanks" in advance!
Hello , you can find same otterbox thread here . I've bought defender in march , no problem to use my phone everyday , my DHD is really in safety with it ...
I use the commuter and love it. The little plastic piece by the power button broke from the amount I press it. It was a bummer but I cut it off a bit and I don't notice it now.
I like this case because it keeps the phone protected without adding a ton of bulk. It also keeps the camera lens from scratching from setting the phone down on its back.
Sent from my Desire HD using XDA App
Well, many many thanks to both of you guys. It gave me more options.. So..
1 - Commuter
1 - Defender
I love my commuter. Not too bulky, can still change the battery within a reasonable amount of time. Still feels like I could throw my phone at the wall without damage (Not going to try).
I find the commuter is not too bulky and feels like it will protect the phone from most things. But I seem to use it less now since i rarely seem to drop my phone, though I may soon (hopefully not though) regret that soon.
Commuter here, broken part of the plastic casing though so off to there website now to see if I can get spares..
My Commuter case looked so good.
I bought one to protect the phone, of course.
It cracked right between the speaker on the back, and the rubber area between the power button and volume rocker switch.
It did this while either adjusting volume or hitting power. I've never compressed the case much, its either in my pocket or gently put down flat on a surface. It's never been dropped, and I only had it for a month and a half at the time.
It sucks because the case seems like a sure fire winner for protecting my phone, then this issue happens after a month and a half. I think I'll go get a refund from Telus, because I'm not going to get another that'll end up having the same problem.
I might get the defender for when I go up to the cottage, though, however I'm pretty disappointed so far with the reliability of this case.
I've got the defender and so far i am satisfied albeit its really bulky.. XD
Sent from my Desire HD using Tapatalk
I ordered Otterbox Commuter when they dropped in price and I'm really satisfied.
My phone doesn't drop often but it's just a safer feeling that I have when handling it.
I really recommend it because it's not as bulky as the Defender series.
I'm using Commuter for my DHD and I pretty happy with it! Not too bulky and it make my DHD look more rugged. Now I dont have problem to put it on any table or surface because I dont have to worry the back case and camera lense will scratch.
I have used the commuter for the last 11 months. It has saved my DHD from my destructive 4 year old many times.
I decided on the commuter over the defender as the defender was really large and the commuter wasn't that much larger in my hand. Actually I think it makes the DHD easier to grip.
I couldn't recommend the commuter highly enough.
i've got the defender, have demonstrated it's drop protection (by dropping it of course) many times to friends etc. no cracks
have also dropped it a few times by accident, and no problems whatsoever, it does sound painful when it hits the floor though!
i'd recommend this case any day, the bulkiness is worth it, it does protect it really well. I peeled my screen protector off it straight away.
I've got the commuter.
The silicon is great (allthough it's ripped apart at the micro-usb port).
The shell on the other hand doesn't like being dropped to often and really hates it when you take it off your phone. Got cracks in all four corners and one of them became really really long after some time. Fixed it with a lot of superglue but it's sadly not made to last very long.
i have the commuter for several months now. it was the best buy since my DHD. doesn't make the phone much heavier/thicker. but i think it feels better in my hand when holding it. i really love it. also the silicon covering the plugs is a pretty great idea.
i can't confirm the low quality and possible cracks my pre-posters mentioned. i'm not having any of them.
MarcVanWake said:
i can't confirm the low quality and possible cracks my pre-posters mentioned. i'm not having any of them.
Click to expand...
Click to collapse
It was fine for almost a year.
And it's saved my phone multiple times from being damaged in drops.
So don't get me wrong, i really like it!
But the cracks are there...
I know this is an old thread but I just wanted to add in that I love my defender series. I thought it was "just nice to have" until I dropped it out of my pocket on a busy street without knowing, and watched a car drive over it once I turned around.
You'd think that it would be crushed even with a nice Otterbox case... but I'd have to say "Nope" because when I picked it up off of the street the box and the phone were still in MINT condition. Best piece of plastic I've ever purchased.
h4rex said:
could someone tell me the differences between the original and the fake product?
Click to expand...
Click to collapse
did i miss something? which fake are you talking about?
h4rex said:
could someone tell me the differences between the original and the fake product?
Click to expand...
Click to collapse
Not too sure, more than likely you will get what you pay for. Stick to the original
Dlog said:
It was fine for almost a year.
And it's saved my phone multiple times from being damaged in drops.
So don't get me wrong, i really like it!
But the cracks are there...
Click to expand...
Click to collapse
didn't got you wrong m8 just wanted to mention, that i don't have them. maybe i'm just lucky
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Hey guys,
I did a quick youtube review (my first!) of the Nillkin Fresh flip case with stand:
I purchased this cover from ebay, it arrived in a few days from Singapore. The quality is very good although the stand function isn't perfect. It offers a reasonable level of protection for the handset and overall I'm very happy with it.
jimmyff said:
Hey guys,
I did a quick youtube review (my first!) of the Nillkin case with stand & flip cover:
youtube.com/watch?v=OKmFkbxSAXg
(can't embed it due to new xda account - perhaps mod can edit my post?)
I purchased this cover from ebay, it arrived in a few days from Singapore. The quality is very good although the stand function isn't perfect. It offers a reasonable level of protection for the handset and overall I'm very happy with it.
Click to expand...
Click to collapse
Great review, thanks. I just have one question regarding the case, does the flap remain shut and if so, how? i.e When you hold the case facing down, does the flap open?
esskayy said:
Great review, thanks. I just have one question regarding the case, does the flap remain shut and if so, how? i.e When you hold the case facing down, does the flap open?
Click to expand...
Click to collapse
Thanks.
Unfortunately the front flap doesn't stay closed, it's similar to the samsung galaxy flip if you've seen those.
I don't find it an issue for me but I can imagine for some it could be a problem (for example: if you were going to put your phone loose in your bag).
Cheers
Like you said on the video about it not standing up quite right. Would it with time wear and become more flexible in order to do this better. Also how is it pressing the buttons and also as you mentioned when you dropped it, which part of the phone did it hit.
Also for those who want your phone to unlock as you open the cover and vice versa heres a free app I found
jimmyff said:
Thanks.
Unfortunately the front flap doesn't stay closed, it's similar to the samsung galaxy flip if you've seen those.
I don't find it an issue for me but I can imagine for some it could be a problem (for example: if you were going to put your phone loose in your bag).
Cheers
Click to expand...
Click to collapse
That's what I thought
How does it fare in the pocket?
mufc09 said:
Like you said on the video about it not standing up quite right. Would it with time wear and become more flexible in order to do this better. Also how is it pressing the buttons and also as you mentioned when you dropped it, which part of the phone did it hit.
Click to expand...
Click to collapse
Yeah I expect it will wear in over time and should stand up upright a little better, the fold in the flip cover is still quite "springy" at the moment.
I can't say which part of the phone hit the floor when it fell as I wasn't watching whilst it happened. It probably fell from a little under a meter on to hard marble floor, it certainly made a loud bang (suggesting it hit somewhere on the hard back). The phone was still secure in the case and there is no visible sign of damage.
I have a little concern that if the phone hit floor on the very top or very bottom then there is a chance it will completely bypass the case. Although I think this is the same with most hard back cases.
Cheers
esskayy said:
How does it fare in the pocket?
Click to expand...
Click to collapse
I find it great in front pocket. The front cover stays closed & the case doesn't add much extra bulk. :good:
jimmyff said:
I find it great in front pocket. The front cover stays closed & the case doesn't add much extra bulk. :good:
Click to expand...
Click to collapse
Excellent, thanks again for the info! Before I buy, can you tell me what color case yours is, I'm looking to buy that one
esskayy said:
Excellent, thanks again for the info! Before I buy, can you tell me what color case yours is, I'm looking to buy that one
Click to expand...
Click to collapse
Mines the blue colour, it's a sweet case, I think you'll be pleased with it!
jimmyff said:
Yeah I expect it will wear in over time and should stand up upright a little better, the fold in the flip cover is still quite "springy" at the moment.
I can't say which part of the phone hit the floor when it fell as I wasn't watching whilst it happened. It probably fell from a little under a meter on to hard marble floor, it certainly made a loud bang (suggesting it hit somewhere on the hard back). The phone was still secure in the case and there is no visible sign of damage.
I have a little concern that if the phone hit floor on the very top or very bottom then there is a chance it will completely bypass the case. Although I think this is the same with most hard back cases.
Cheers
Click to expand...
Click to collapse
Great, are you in the UK and if so where did you order one from. I already ordered one from ebay (~nillkin_case or something) but it said it'll take between a month and month and a half. So if there's a more viable option i'll cancel that one.
It looks great this case and there is little to choose from wrt cases that have a stand.
EDIT: Trust me to order it during chinese new year :/
Looks good, I've currently got a TPU SLine case, but putchased a TPU case with kickstand, which I'm hoping is alright for a daily driver, but if it isn't I might have a go with this case.
Thanks for the review.
parker09 said:
Looks good, I've currently got a TPU SLine case, but putchased a TPU case with kickstand, which I'm hoping is alright for a daily driver, but if it isn't I might have a go with this case.
Thanks for the review.
Click to expand...
Click to collapse
What do you think of them S-Line cases? How would they fair with a drop from shoulder/chest height? Also let us know how the tpu with a stand goes.
mufc09 said:
Great, are you in the UK and if so where did you order one from. I already ordered one from ebay (~nillkin_case or something) but it said it'll take between a month and month and a half. So if there's a more viable option i'll cancel that one.
It looks great this case and there is little to choose from wrt cases that have a stand.
EDIT: Trust me to order it during chinese new year :/
Click to expand...
Click to collapse
yeah I'm in the UK too. I ordered off the same ebay seller and despite them saying 4-6 weeks it arrived in about 5 days... Hope your case arrives quickly too
jimmyff said:
yeah I'm in the UK too. I ordered off the same ebay seller and despite them saying 4-6 weeks it arrived in about 5 days... Hope your case arrives quickly too
Click to expand...
Click to collapse
I emailed them and they said because it's Chinese new year, they're not working till the 14th . If only I ordered it the day before lol.
So overall you're very happy with it and would you think about getting a good TPU case like Diztronic? or even Otterbox if it's available?
mufc09 said:
So overall you're very happy with it and would you think about getting a good TPU case like Diztronic? or even Otterbox if it's available?
Click to expand...
Click to collapse
Yeah, I do really like it and it's certainly good value for money (£7.50/$10). I will probably get a TPU case at some point too and a bumper to boot. I guess they're all good and suit different purposes.
Yes, during Chinese New Year's it tends to get a little busy and slow especially since Singaporeans celebrate it, some other vendors online have warned about it being slow during this time.
The back seems a little slippery. I had a Mercury TPU which is as slippery on the back as it is on the front glass, so I feel it slide when I hold it with my fingers on the front and back. I guess with a textured front cover on this it shouldn't be as bad? Has any slipperiness from the case been a problem for you? Thanks for the review, it's very helpful.
xnordroid said:
The back seems a little slippery. I had a Mercury TPU which is as slippery on the back as it is on the front glass, so I feel it slide when I hold it with my fingers on the front and back. I guess with a textured front cover on this it shouldn't be as bad? Has any slipperiness from the case been a problem for you? Thanks for the review, it's very helpful.
Click to expand...
Click to collapse
I guess it is a little slippery but it isn't something that I've really noticed or found to be a problem. The naked nexus 4 was crazy slippery, it would just glide across the desk etc. With this case it's more like a normal phone, it stays put when left alone. Perhaps the stand latch helps anchor it a little better other hardback cases.
When answering calls you'd usually fold the cover over so the inside of your hand is connected with the microfibre material which helps secure it. A small observation is that due to the flip cover having enough material to also cover one side of the phone, when folded back there is more cover than back of phone. It's a minor criticism with the design and one that doesn't really bother me.
Overall I've found the case makes the phone much less slippery but I imagine that a soft backed case (eg: TPU) would secure it even further.
Cheers