Related
I need to unroot my phone for warranty repair. Can someone please tell me where to download the necessaries file and how to do it from Asia (Malaysia). Thanks in advance
sseraphh said:
I need to unroot my phone for warranty repair. Can someone please tell me where to download the necessaries file and how to do it from Asia (Malaysia). Thanks in advance
Click to expand...
Click to collapse
you just got root?/ are you still s-on with locked bootloader?
the later two are much more important than root..for warranty purposes
ganeshp said:
you just got root?/ are you still s-on with locked bootloader?
the later two are much more important than root..for warranty purposes
Click to expand...
Click to collapse
My handset is on s-off right now and I think my bootloader is not lock.
Thanks.
sseraphh said:
My handset is on s-off right now and I think my bootloader is not lock.
Thanks.
Click to expand...
Click to collapse
you need to do S-ON for warranty claims....and to do S-ON you need to flash stock RUU first(this will remove root)..
check this guide...for S-ON and unroot (step 5)for guide click here
if you just want to unroot...and leave the rest...as it is
then
1.if you got supersu as root manager....there is a option in settings to do permanent unroot
2.if you got superuser. as root manager...then it might have the same option too..chk it..otherwise install supersu from market and unroot
ganeshp said:
you need to do S-ON for warranty claims....and to do S-ON you need to flash stock RUU first(this will remove root)..
check this guide...for S-ON and unroot (step 5)for guide click here
if you just want to unroot...and leave the rest...as it is
then
1.if you got supersu as root manager....there is a option in settings to do permanent unroot
2.if you got superuser. as root manager...then it might have the same option too..chk it..otherwise install supersu from market and unroot
Click to expand...
Click to collapse
Thanks for your reply but which stock RUU should I download? I cannot find any links to download the latest RUU for HTC Asia. Please help.
also looking to unroot to sell my phone (switching to sprint), if i install the latest RUU or whatever to get s-on and no root, does that fix recovery or do i have to use adb to push stock recovery? if so is there a link to stock recovery?
sseraphh said:
Thanks for your reply but which stock RUU should I download? I cannot find any links to download the latest RUU for HTC Asia. Please help.
Click to expand...
Click to collapse
here is the link to RUU's...get the RUU based on your CID...if you are supercid ..then any RUU will do for you
link to shipped roms
if your phone is XE and unbranded (...i.e. not linked to any carrier)
get something along this line
RUU_Pyramid_LE_hTC_Asia_WWE_<your firmware/build number>_Radio_<your radio>_...
if your phone is normal sensation and unbranded then
RUU_Pyramid_hTC_Asia_WWE_<your firmware/build number>_Radio_<your radio>_.....
twilightvanquisher said:
also looking to unroot to sell my phone (switching to sprint), if i install the latest RUU or whatever to get s-on and no root, does that fix recovery or do i have to use adb to push stock recovery? if so is there a link to stock recovery?
Click to expand...
Click to collapse
running RUU will wipe every partition and replace it with stock...so your recovery will be replaced to stock too
ganeshp said:
here is the link to RUU's...get the RUU based on your CID...if you are supercid ..then any RUU will do for you
link to shipped roms
if your phone is XE and unbranded (...i.e. not linked to any carrier)
get something along this line
RUU_Pyramid_LE_hTC_Asia_WWE_<your firmware/build number>_Radio_<your radio>_...
Thanks but filefactory got limitation in my country. Always get slot full when try to download from last week. Is there any other links to get this file?
Click to expand...
Click to collapse
sseraphh said:
ganeshp said:
here is the link to RUU's...get the RUU based on your CID...if you are supercid ..then any RUU will do for you
link to shipped roms
if your phone is XE and unbranded (...i.e. not linked to any carrier)
get something along this line
RUU_Pyramid_LE_hTC_Asia_WWE_<your firmware/build number>_Radio_<your radio>_...
Thanks but filefactory got limitation in my country. Always get slot full when try to download from last week. Is there any other links to get this file?
Click to expand...
Click to collapse
try google remove underscores in between and you might find it.
also if you give me your cid if you are not supercid
and firmware/build number and radio
ill try from this side too
Click to expand...
Click to collapse
Will at&t ruu 2.20.502.7 will work on supercid 1111111 at&t hox to get back to stock?
I am having at&t htc one x bootloader with :
**** tampered ****
**** unlocked ****
evita pvt shp s-on rl
hboot-1.09.0000
radio-0.19as.32.09.09_l
opendsp-v28.1.0.32.0504
emmc-boot
apr 2 2012,21:08:24
installed twrp 2.2.0 recovery and stock rooted rom 2.23707.2 asia generic.
Now the problem is, i am facing the mobile signal(not wifi) dropping issues and i have to revert back to at&t stock rom, i have downloaded the official at&t ruu 2.20.502.2.....exe,
but i am concerned with the doubt that will the ruu will work 100% on supercid 111111 without any problem after relocking the bootloder or do i have to revert back the stock at&t cid, and if yes then what is the procedure to revert back the stock at&t cid???????
If you ever want to unlock the bootloader again leave the cid alone. BTW you can just flash the radio from the new ota if you want. There's a thread in development section with radios
gunnyman said:
If you ever want to unlock the bootloader again leave the cid alone. BTW you can just flash the radio from the new ota if you want. There's a thread in development section with radios
Click to expand...
Click to collapse
thanks for the help,appreciable. But i don't want to flash just the radio, coz i already did that, but it did not solve my problem. So the question still continues..Can i run Ruu with the current supercid 111111 or do i have to revert it back to stock???
SORRY FOR BAD ENGLISH. ITS NOT MY FAMILIAR LANGUAGE.
You don't have to change cid to flash the ruu just relock the bootloader
gunnyman said:
you don't have to change cid to flash the ruu just relock the bootloader
Click to expand...
Click to collapse
thanks for the help,
Are you already on 2.20? If not, why not run 1.85 RUU?
thedauntlessone said:
Are you already on 2.20? If not, why not run 1.85 RUU?
Click to expand...
Click to collapse
good question.
thedauntlessone said:
Are you already on 2.20? If not, why not run 1.85 RUU?
Click to expand...
Click to collapse
Doesn't look like the op is on 2.20, the hboot for 2.20 is 1.14.0002.
Absolutely Right, i am not on 2.20,
Sent from my HTC One XL using xda app-developers app
Sir this is not about 2.20 or 1.85, i just want to confirm is, if running a ruu on supercid 111111 will work 100% or do i have to revert to the region's cid of the ruu am using.
I dont want that ruu should get interupt by any reason nd i brick my phone coz i dont have any warranty or insurance on it.
SORRY 4 THE BAD ENGLISH, ITS NOT MY NATIVE LANGUAGE.
Sent from my AT&T HTC One X using xda app-developers app
hemsmaverick said:
Sir this is not about 2.20 or 1.85, i just want to confirm is, if running a ruu on supercid 111111 will work 100% or do i have to revert to the region's cid of the ruu am using.
I dont want that ruu should get interupt by any reason nd i brick my phone coz i dont have any warranty or insurance on it.
SORRY 4 THE BAD ENGLISH, ITS NOT MY NATIVE LANGUAGE.
Sent from my AT&T HTC One X using xda app-developers app
Click to expand...
Click to collapse
your question has been answered multiple times.
SuperCID will allow you to run the 2.20 RUU. The reason we're cautioning you is because once you do that, you will lose the ability to flash new radios at all and you'll have to flash a kernel in fast boot.
Also once you do this update to 2.20 you can't go backward to 1.85 even WITH SuperCID because the update includes a new HBOOT.
gunnyman said:
your question has been answered multiple times.
SuperCID will allow you to run the 2.20 RUU. The reason we're cautioning you is because once you do that, you will lose the ability to flash new radios at all and you'll have to flash a kernel in fast boot.
Also once you do this update to 2.20 you can't go backward to 1.85 even WITH SuperCID because the update includes a new HBOOT.
Click to expand...
Click to collapse
ok what will happen if i extract the rom.zip from the ruu and will extract and replace the hboot with earlier one and also the recovery with custom one and will rezip it and rename it as PJ83.img and will copy it to storage and run it in the current boot loader. will relock it before running the process.
Will this work and will i b able to flash the stock rom with same boot loader and custom recovery?
I AM AWARE INSTEAD OF DOING THIS I CAN JUST FLASH THE STOCK ROOTED 2.20 ROM FROM TWRP BUT I JUST WANT TO INCREASE MY TECHNICAL KNOWLEDGE AND WORK.
hemsmaverick said:
ok what will happen if i extract the rom.zip from the ruu and will extract and replace the hboot with earlier one and also the recovery with custom one and will rezip it and rename it as PJ83.img and will copy it to storage and run it in the current boot loader. will relock it before running the process.
Will this work and will i b able to flash the stock rom with same boot loader and custom recovery?
I AM AWARE INSTEAD OF DOING THIS I CAN JUST FLASH THE STOCK ROOTED 2.20 ROM FROM TWRP BUT I JUST WANT TO INCREASE MY TECHNICAL KNOWLEDGE AND WORK.
Click to expand...
Click to collapse
won't work because RUU's include a signature check and if you alter the files in any way, that signature check will fail.
gunnyman said:
won't work because ruu's include a signature check and if you alter the files in any way, that signature check will fail.
Click to expand...
Click to collapse
ok, well as per ur earlier suggestion, i have flash the radio incl ril files from at&t 1.85, asia 2.23, currently on a o2 2.29.
But signal dropping solution has not been resolved.
I have dropped the plan of running ruu and will install custom rom tn special edition 3.6
can u suggest me the best radio for better mobile signals? (i am from india -region asia)
Bonjour everyone, here's a little guide on how to unbrand your phone in order to get the OTA updates notifications directly and be able to install them.
If you want to get S-OFF one day on your One SV, read this first. You need to change CID to SuperCID to do so, and it's not possible (for the moment) if you upgrade to JB
Basically this works as long as your phone model is sold unbranded somewhere in the world and that the people having such a phone got an OTA update.
For now, ther's no way to change CID if you're running JB and are S-ON. That means that this only work for One SV's running ICS who want to get the OTA updates.
As far as I know, it works on K2_U and K2_UL, since they both got an OTA update to JB.
The trick is simple, I didn't invent it and haven't been able to find its original founder, but thanks a lot to her or him !
I'm basically just a messenger here since I only tried out some stuff that worked with other phones, so thanks a lot to bkcokota, old.splatterhand and jmztaylor
Don't try it if you're worried, bricks happen, you'd be the only one responsible !
Here we go :
1. First you need to root your phone, here's how.
2. Change you CID using the same method than for the One S.
Personnaly, I changed it to "HTC__203", which is the CID unbranded HTC phones have in France (HTC-FRA).
For example, "HTC__001" is HTC-WWE, which stands for World Wide English.
You can change it to whatever CID you like : choose it well. I can only recommend to use HTC__203 since it's the only one I tried and that it worked, but do as you please !
3. Flash stock recovery back. You'll find it here or here. Flash it like you flashed CWM recovery (into fastboot, using fastboot flash recovery xxxxxx.img).
4. Relock your bootloader. It's possible that it's not necessary, but it can't hurt ("fastboot oem lock", when in fastboot usb)
5. Run a RUU that matches you unbranded CID to get an "unbranded" rom.
You'll find them here, for example. The "RUU_K2_UL_ICS_40_HTC_Europe_1.17.401.5_R....exe" one will work with HTC__203 and HTC__001 CIDs.
6. Go ask your phone if he can find any updates
WARNING : for the moment there's no way to change CID if you upgrade to JB since the newer HBOOT (v2.00) don't let you do it. That means that for now you won't be able to S-OFF if you upgrate to JB using this method. For now...
Nice one!
Only thing i would add for people to know:
if somebody want to get S-Off, they should change the CID to SuperCID 11111111 (or if you want 22222222,...).
old.splatterhand said:
Nice one!
Only thing i would add for people to know:
if somebody want to get S-Off, they should change the CID to SuperCID 11111111 (or if you want 22222222,...).
Click to expand...
Click to collapse
Done, sir.
It was only said at the bottom of the message at first, but now I put it at the beginning as well.
There's one thing that I'm trying to get though : according to a lot of people and forums, you don't get OTA when you have SuperCID... but some poeple say they do.
It probably changes depending on the type of HTC phone, but also depending on the OTA (some got the first ones, but not the latest...).
I got the ota notification with SuperCID, i think it depends on more things.
But there i'm not far enough into it.
I have had no success at all. My story:
Updated a branded phone to JB, rooted. Then I did a moonshine S-off and changed CID to HTC__001 (even tried 11111111).
I have downloaded a ICS RUU (couldn't find stock K2_UL so I thought that I would download ICS first and then do OTA to JB) but I am getting error 158. I have checked md5 sum and it matches (http://androidfiles.org/ruu/getdown...0.14_2_10.49.40.11L_release_301902_signed.exe). Any ideas?
If you're on jb and hboot 2.00, that's normal... and written in the first post.
There is information that it is impossible to change CID while on JB and with 2.0 hboot, but I guess that I have had success in changing to superCID (at least this is what I can read in bootloader and using fastboot oem readcid command.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Is there any chance to make this for the k2cl ( boost mobile ) version?
idr666 said:
Is there any chance to make this for the k2cl ( boost mobile ) version?
Click to expand...
Click to collapse
Can you be more specific, what you mean with "this".
old.splatterhand said:
Can you be more specific, what you mean with "this".
Click to expand...
Click to collapse
Sorry, I was wondering if there is a way to update this phone ( the k2cl ) to JB
idr666 said:
Sorry, I was wondering if there is a way to update this phone ( the k2cl ) to JB
Click to expand...
Click to collapse
Boost has no official jb, but i know that there is work for an custom jb rom for boost.
Oh, thank you for the info. Is there any link about this work in progress?
idr666 said:
Oh, thank you for the info. Is there any link about this work in progress?
Click to expand...
Click to collapse
Look here
szympro said:
There is information that it is impossible to change CID while on JB and with 2.0 hboot, but I guess that I have had success in changing to superCID (at least this is what I can read in bootloader and using fastboot oem readcid command.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Click to expand...
Click to collapse
old.splatterhand, you seem to know this and that about One SV. No chance for older RUU, right? I can't seem to find a clean WWE JB OTA update. I just want a clean, stock, not modified ROM from HTC and I thought RUU is the only way to go :crying: Any advices?
szympro said:
There is information that it is impossible to change CID while on JB and with 2.0 hboot,...
Click to expand...
Click to collapse
This was before moonshine was available. With S-Off i think it should be possible.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Click to expand...
Click to collapse
I think so.
szympro said:
old.splatterhand, you seem to know this and that about One SV. No chance for older RUU, right? I can't seem to find a clean WWE JB OTA update. I just want a clean, stock, not modified ROM from HTC and I thought RUU is the only way to go :crying: Any advices?
Click to expand...
Click to collapse
To get it a bit clearer.
At this point i'm not very up to date, thats why i didn't answer til now.
I think (but i'm not sure) you can flash the ruu, if you are on hboot 1.0.
And as you are S-Off you should be able to downgrade hboot. But this is a very risky point, you can easily brick your device. Here is, how you have to do:
rollon76 said:
To change hboot you will need a PL80IMG.zip on sdcard with android-info.txt and hboot.img inside it.
reboot to bootloader and flash.
Click to expand...
Click to collapse
The thing what makes it difficult, is to get the hboot.img (its inside ics ruu), cause the htc ruu's encrypted and i only have heard about tools for linux which can decrypt it.
Thanks to your reply I did some research and I have managed to do what I wanted. I have downgraded hboot first (by extracting and encrypting ICS RUU using linux), then I could run RUU and now I am stock ICS with S-off and superCID
Should I post some files from RUU? 1.0 hboot or stock recovery? You guys need something?
Thanks for your helping hand old.splatterhand!
szympro said:
Thanks to your reply I did some research and I have managed to do what I wanted. I have downgraded hboot first (by extracting and encrypting ICS RUU using linux), then I could run RUU and now I am stock ICS with S-off and superCID
Should I post some files from RUU? 1.0 hboot or stock recovery? You guys need something?
Thanks for your helping hand old.splatterhand!
Click to expand...
Click to collapse
Glad, it worked for you.
Yes, of course, everything is appreciated! You can use this thread, please post ruu name too. You can look at my posts there. Hboot, boot.img, recovery, radio, would be fine.
HERE have other ruu
https://www.dropbox.com/sh/1t2zswod7tc97az/5hbzEgTv80
szympro said:
I have downgraded hboot first (by extracting and encrypting ICS RUU using linux)
Click to expand...
Click to collapse
Wow, that's cool !
Did you use rollon's method and flashed PL80IMG.zip in bootloader mode ?
If yes, which android-info.txt did you use ?
If not, how did you do it ?
szympro said:
then I could run RUU and now I am stock ICS with S-off and superCID
Click to expand...
Click to collapse
Even cooler for you.
Did you get the ota update notification for JB then ?
Did you manage to apply it ?
Thanks and congratulations !
Hi everyone.
Just a quick message to confirm that rollon's method works.
To downgrade you need to be S-OFF, extract and decrypt (with ruuveal, using linux or a linux virtualbox runned in windows) hboot and androidinfo from ICS RUU, put them in a zip named PL80IMG.zip, put it on your sd card and boot into bootloader. Then you can run the ICS RUU normally and you'll be back to stock ICS, with a "*** LOCKED ***" bootloader (not relocked !), will be able to go back to S-ON using "fastboot oem writesecureflag 3" (thanks to JMZ)...
You'll then have a locked S-ON out of box phone running 100% stock ICS with original boot, recovery and all that... who'll get the 2 JB OTA's...
In case anyone's interested
WARNING*WARNING*WARNING
do this at your own risk! This is for s4 only!!
It has been brought to my attention that there might be a mid (model id) conflict
With flashing this and me along with others are trying to narrow down the issue. Thanks to @real187 for bring this to my attention.
I'm
S-off
Cid 11111111
MID PJ4011000
And had no problems flashing this firmware but others with same setup have reported soft brick.
OK I think @mkinney88 may have pin pointed where the soft brick may be coming from. If you s-off using facepalm, flash the firmware.zip and get soft bricked try this.
1. Get back to s-on (warning read directions several times before doing you CAN hard brick your phone) ~ http://forum.xda-developers.com/showthread.php?p=38267667
2. Get s-off with moonshine ~ http://forum.xda-developers.com/showthread.php?p=42613403
First off this is mostly ment for the T-Mobile branded phones but ill try and help all please let me know when asking questions if you have a T-Mobile or HTC branded phone (it has it right on the front of phone ).
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111 (I had no problem flashing firmware with s-off and Cid 11111111 but others have reported problems so if you don't want to chance it write your Cid to T-MOB010)
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Downloads
FIRMWARE ZIP DOWNLOAD
https://drive.google.com/folderview?id=0B-BYnLh2sosKamRwaUJJS05oU3M&usp=sharing or http://db.tt/Wua8mDS2
Credit go's to mkinney88 for the firmware
Bricks
First off if you can get into bootloader then you don't have a hard brick.
If your phone is in the black screen of death there may be hope but we're still trying to figure that one out.
If your phone doesn't respond to any input from you (power, power+volume down) then congratulations you have a hard brick but don't through it in the junk drawer just yet, you can have it jtag repaired (they open phone plug into main board and flash everything)
Here's the link (you do have to pay for this)
http://forum.xda-developers.com/showthread.php?p=37136553
One more just in case
rc420head said:
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Click to expand...
Click to collapse
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
vatsaman said:
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
Click to expand...
Click to collapse
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
I put a note of this in op just now, thanks for the warning, I'm trying to figure out why some can do this Cid 11111111 and some can't.
-----------------------------------------
Friends don't let friends post without searching first!
rc420head said:
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
Click to expand...
Click to collapse
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
Something else is going on. I used facepalm, and Cid 11111111 to flash firmware twice now with no issues and started same as you hboot 1.14
-----------------------------------------
Friends don't let friends post without searching first!
thank you!
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
khan.orak said:
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
Click to expand...
Click to collapse
I'm not sure if I understand your question. So let me ask a few questions.
What hboot are you on?
What carrier are you using?
Are you wanting to try cm 10.1 and afraid for losing stock?
What is stock just HTC sense 4+ or is there carrier added stuff?
rc420head said:
I'm not sure if I understand your question. So let me ask a few questions.
Click to expand...
Click to collapse
ok I'll try to make it clearer.
What hboot are you on?
Click to expand...
Click to collapse
I'm on hboot 2.15.0000
What carrier are you using?
Click to expand...
Click to collapse
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Are you wanting to try cm 10.1 and afraid for losing stock?
Click to expand...
Click to collapse
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
What is stock just HTC sense 4+ or is there carrier added stuff?
Click to expand...
Click to collapse
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
khan.orak said:
ok I'll try to make it clearer.
I'm on hboot 2.15.0000
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
Click to expand...
Click to collapse
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
rc420head said:
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
Click to expand...
Click to collapse
Thanks for the reply, really much appreciated.
I already have rooted the device and custom recovery TWRP 2.5. Though I am considering to downgrade it to 2.3.30. Now I made a backup of stock ROM. (System + Boot Partition)
So is this the only way I can get to stock?
I read somewhere that the following method could be used too(?)
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
khan.orak said:
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
Click to expand...
Click to collapse
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Big thanks! :good:
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Yes this will also work (I was under the impression no ruu's were available)
khan.orak said:
Big thanks! :good:
Click to expand...
Click to collapse
forgiven90 said:
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yeah disabling the fast dormancy solved all my problems. :good:
I have S4 Ville on firmware 3.14.531.17 and need to know if S-OFF is possible using whatever method available. Moonshine thread states that only 3.14.531.11 (T-MOB) is supported and haven't found any details in the Facepalm thread.
Anyone know for sure?
Bump
Sent from my One S using XDA Premium 4 mobile app
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
tivofool said:
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
Click to expand...
Click to collapse
Well gave this a shot and after 5 hours I am back on CM10.2 with S-ON and latest firmware still.
Thanks for the help though. Cheers.
Anyone else got any idea?
bump
Look for 3.14.531.11. It should be available somewhere. Lock the phone back and RUU it. Then you can unlock again and S-OFF with moonshine.
evrycard said:
Look for 3.14.531.11. It should be available somewhere. Lock the phone back and RUU it. Then you can unlock again and S-OFF with moonshine.
Click to expand...
Click to collapse
He probably cannot downgrade from *.17 to *.11.
I don't know what parts of the firmware moonshine needs. But you could try downgrade using a OTA or Nandroid.
Same here
I'm pretty much stuck with a One-S Bootloader unlocked with S-on.
I can't find a way to get S-Off. Just googling and throwing prayers in the sky someone develops a way.
pyrocide said:
Well gave this a shot and after 5 hours I am back on CM10.2 with S-ON and latest firmware still.
Thanks for the help though. Cheers.
Anyone else got any idea?
Click to expand...
Click to collapse
If that procedure took you 5 hours... Maybe s-off isn't for you.
Sent from my HTC One S using xda app-developers app
havikx said:
If that procedure took you 5 hours... Maybe s-off isn't for you.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
It took me 5 hours total to begin finding all req's and trying the above method, finding it not to work, redoing the RUU *.17 and getting BACK on CM10.2 and having a phone to make calls with. The method above took maybe 20-30 minutes of double checking and making sure i didn't miss something.
Maybe PM this guy. He posted that it moonshine worked on .17.
http://forum.xda-developers.com/showpost.php?p=45955250&postcount=1091
Ask if he ran moonshine on Linux.
tivofool said:
Maybe PM this guy. He posted that it moonshine worked on .17.
http://forum.xda-developers.com/showpost.php?p=45955250&postcount=1091
Ask if he ran moonshine on Linux.
Click to expand...
Click to collapse
PM'd him for more info. Thanks!
So I was having problems getting s-off as well, eventually I got it done, but it was definitely a big trial and error process.
What I ended up doing was:
1) Get the 3.14.531.11 RUU from http://www.androidruu.com/index.php?developer=Ville (make sure you get the TMOUS one) This link is also provided in the first post in the Android development section
2) I ended up using Moonshine S-Off (http://forum.xda-developers.com/showthread.php?t=2325590) but I needed to use it in conjunction with running it on Ubuntu. Luckily I had a spare hard drive lying around. If you don't, I believe you can run it through the CD as well as long your burn the Ubuntu.iso on a disc. Plug in your phone to the computer and let it do its magic
3) From there, if you wanted to, you can change to SuperCID. Since you have s-off by then, you can change it from the fastboot usb in the bootloader with the line fastboot oem writecid 11111111 (double check, i'm just writing off the top of my head)
4) Then install roms and etc through the usual custom recovery
Note. I tried the Maximus HD, yes it was nice, but it didn't allow me to utilize my phone as a hotspot, so I ended up using the Dark Jelly rom instead. So far it's been very nice. The hotspot works, but the tethering portion is still unavailable. Just my two cents.
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
tivofool said:
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
Click to expand...
Click to collapse
i can say that this worked for me as well. i didn't relock bootloader before installing the 3.14.531.11 ruu though. still worked for me. also installed moonshine on windows. ( guess i'm lucky )
bnd10706 said:
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
Click to expand...
Click to collapse
You saved me so much time. Thanks!
bnd10706 said:
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
Click to expand...
Click to collapse
I do not understand meet all the requirement and I run it step by step and still gets stuck in step 3 moonshine I need urgent help, thanks
pyrocide said:
I have S4 Ville on firmware 3.14.531.17 and need to know if S-OFF is possible using whatever method available. Moonshine thread states that only 3.14.531.11 (T-MOB) is supported and haven't found any details in the Facepalm thread.
Anyone know for sure?
Click to expand...
Click to collapse
Test... click here
http://forum.xda-developers.com/showthread.php?t=2569755
[Q]Hboot/Firmware update 2.15 to 2.16 et al.
Sorry wrong thread.