CWM Recovery Solution need help! - RAZR HD Q&A, Help & Troubleshooting

I posted in troubleshooting but hadn't received a reply and wasn't sure if I had posted in the wrong forum so here I go
Firstly I hope this is the right subforum for this post.
So I am pretty much stuck with a brick atm( can make calls / texts ) and I am not sure where I went wrong.
I went and unlocked my phone, unlocked the bootloader and installed CWM.
But when I went to flash a ROM and Gapps I encountered a problem
When I went to go and wipe data and cache I got these errors.
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I still proceeded to go ahead and try and flash Gapps and Liquidsmooth ROM.
When I selected to reboot after the flash my phone did nothing.
The screen was black and I was forced to reboot with Volume up/ Power.
Now I have found a thread in a sub forum of another phone but was hoping to find a Razr HD XT925 specific fix,
I will link the forums for reference but I am worried I may have bricked my phone.
When I do get it to boot it is practically the stock ROM but no Gapps, some buttons dont work.
reference links :
http://forum.xda-developers.com/show....php?t=1713419
http://forum.xda-developers.com/show....php?t=1492940
I hope someone can help me fix this issue
Thankyou in advance.
I also cant get my phone to recognise that it is in fact in USB debugging mode and I wasn't able to re run the Motopocalypse and Motochopper

Related

[Q] CM7 to Mezmerize Stock issues

So I flashed CM7 to my phone a while back. It worked. Fantastic.
There were some drawbacks to having a pre-nightly rom so I wanted out. I looked at the dev forums and saw the instructions to flash the full stock rom to the phone. A genuine factory reset. I followed the instructions, hoping it would work (and before anyone asks, yes, I did turn off the lagfix in voodoo).
Odin continually fails to flash the stock rom onto my phone and now I can only get to the bootloader on my phone. I can't mount USB storage, I can't get anything onto my phone to flash with CWM, and I now have a phone I cannot use until I get this fixed.
Obviously I did something wrong, but I'm having trouble retracing my steps to find out what that wrong move was. If anyone knows what I did wrong just by reading this, awesome, please help me out.
Also, when I try to mount usb storage from CWM, I get an error saying
E:Unable to open ums lunfile (No such file or directory)
Click to expand...
Click to collapse
and on loading the bootloader I get
ClockworkMod Recovery v4.0.1.0
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
Click to expand...
Click to collapse
Don't know if you're still having an issue, but flash ec10 or ee19 through Odin, and make sure to check re-partition. You can either stay there or go to the gingerbread based EH09, which is the official firmware. Before you flash that in Odin, uncheck re-partition. It might say that it failed. If it does, disconnect the phone, put the battery back in and power it up. If it works, and it should, you're golden. Hope this helped
Sent from my SCH-I500 using XDA App
I had the same scenario w/ my Showcase. I did everything "correctly", and I never could get GB to load back on there after loading CM7.1. I tried multiple versions of 2.2 through Odin, I constantly got FC's. Then I tried reloading GB, I got stuck in boot loop. I had to send it in to Samsung... under warranty.

[Q] Stuck @ boot loop after unroot with hack-kit

Hello,
First at all, thanks to everybody for your time, help, support. Specially to the creator and contributors of the hack-kit and all the ROM programmers.
Apologize for the long post but I want to provide as much information as I can to help getting help.
A couple of days ago I started having problems with my Inspire, the phone started getting frozen after a call and later just after a few minutes of use. My initial thought was an app and decided to re-install the a ROM (gene's) and start from scratch.
I noticed that when preparing for a ROM I started getting this error message:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
The problem continued with a freshly installed ROM (tried gene's and cyanogen 7.1) with no apps installed other than the ones that came with the ROM, I also tried different mSD cards to be sure that was not the issue.
So I decided to unroot the phone, tried for a couple of days with the stock ROM and send it for warranty repair/exchange.
After a successful execution of the hack kit (aahk-12122011) "Return to S-ON and Flash Stock RUU" the phone booted to stock AT&T ROM and got frozen again.
I removed the battery and now the phone is cycling after the white screen with htc on green
-> htc quietly brilliant -> ATT (logo) Rethink possible -> htc quietly brilliant -> ...
If I turn on the phone holding volume down I get:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011, 00:55:45​
Recovery takes me to cellphone with a red triangle and exclamation sign. Pressing Power and volume up places me at stock recovery with the following error message: e: can't open/cache/recovery/command
Trying Wipe data/factory reset does not change anything,and produce the following errors:
-- Wiping data...
Formatting /data...
E:Can't open /data/cwpkg.zip
E:Can't open /data/cw.prop
E:Can't open /data/cwpkg.zip
E:Can't open /data/cw.prop
Formatting /cache...
E:Can't mount /data/data/recovery/log
E:Can't open /data/data/recovery/log
E:set_bootloader_message_block: emmc_read_data fail!​
I searched and unsuccessfully tried a bunch of suggestion, any help will be much appreciate.
Thanks
aletsm said:
Hello,
First at all, thanks to everybody for your time, help, support. Specially to the creator and contributors of the hack-kit and all the ROM programmers.
Apologize for the long post but I want to provide as much information as I can to help getting help.
A couple of days ago I started having problems with my Inspire, the phone started getting frozen after a call and later just after a few minutes of use. My initial thought was an app and decided to re-install the a ROM (gene's) and start from scratch.
I noticed that when preparing for a ROM I started getting this error message:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
The problem continued with a freshly installed ROM (tried gene's and cyanogen 7.1) with no apps installed other than the ones that came with the ROM, I also tried different mSD cards to be sure that was not the issue.
So I decided to unroot the phone, tried for a couple of days with the stock ROM and send it for warranty repair/exchange.
After a successful execution of the hack kit (aahk-12122011) "Return to S-ON and Flash Stock RUU" the phone booted to stock AT&T ROM and got frozen again.
I removed the battery and now the phone is cycling after the white screen with htc on green
-> htc quietly brilliant -> ATT (logo) Rethink possible -> htc quietly brilliant -> ...
If I turn on the phone holding volume down I get:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011, 00:55:45​
Recovery takes me to cellphone with a red triangle and exclamation sign. Pressing Power and volume up places me at stock recovery with the following error message: e: can't open/cache/recovery/command
Trying Wipe data/factory reset does not change anything,and produce the following errors:
-- Wiping data...
Formatting /data...
E:Can't open /data/cwpkg.zip
E:Can't open /data/cw.prop
E:Can't open /data/cwpkg.zip
E:Can't open /data/cw.prop
Formatting /cache...
E:Can't mount /data/data/recovery/log
E:Can't open /data/data/recovery/log
E:set_bootloader_message_block: emmc_read_data fail!​
I searched and unsuccessfully tried a bunch of suggestion, any help will be much appreciate.
Thanks
Click to expand...
Click to collapse
IRC chatroom might be your best bet for a speedy fix...
Thanks,
Can you point me to the right IRC channel and url?
MMM-BACONSTRIPS said:
IRC chatroom might be your best bet for a speedy fix...
Click to expand...
Click to collapse
use fastboot to install custom recovery.
be sure a recovery img file is in the SDK platform "tools" or the directory with "fastboot"
remove battery and disconnected from pc
Insert battery
put your phone into fastboot mode (hold camera button and press power)
connect to pc
open a terminal in the directory where the recovery image is and type:
fastboot flash recovery "name of Recovery.img" enter
Phone should boot into recovery. If the phone does't boot into recovery, Disconnect the phone and remove battery. Install battery and start custom recovery.
aletsm said:
Thanks,
Can you point me to the right IRC channel and url?
Click to expand...
Click to collapse
It's in the hack kit thread. Sorry, I'm not going to do that for you.
Thanks, was looking for a Inspire channel not hack-kit channel.
MMM-BACONSTRIPS said:
It's in the hack kit thread. Sorry, I'm not going to do that for you.
Click to expand...
Click to collapse
aletsm said:
Thanks, was looking for a Inspire channel not hack-kit channel.
Click to expand...
Click to collapse
but you used the hack kit to unroot? soooo why wouldn't you want to use the hack kit IRC? whatever floats your boat bud.
What you should do is download stock ruu from HTC website. Boot into hboot and select fastboot. Plug phone into pc. Run the ruu and phone will be back to stock att gb rom. This will work as long as your are s-on.
With the stock ruu you want to have HTC sync installed and running during the process.
Sent from my Inspire 4G using xda premium
@MMM-BACONSTRIPS: I thought there were two different channels, one for the Inspire (general stuff) and another for issues with the hack kit, as the issue was with the phone and not the hack kit ...
At the end I went to the hack kit IRC as you suggested, got help there from Antony1s and specially attn1 and I was able to restore and boot the phone.
I did continue having problems with the phone that seemed to point to a bad emmc, sent it to AT&T for warranty replacement and got a new one which is already rooted with the hack kit.
@Gizmoe: Thanks for posting as it could help others, I did get help in the IRC before your post so I could not try your suggestion.
Thanks
MMM-BACONSTRIPS said:
but you used the hack kit to unroot? soooo why wouldn't you want to use the hack kit IRC? whatever floats your boat bud.
Click to expand...
Click to collapse

[Q] Infuse Stuck in Boot Loop & Can't Flash

Okay so I really need some help. I was installing CWM 10 and decided to try another one when the home key didn't work, and tried to go with Slim Bean. The phone has been stuck in boot loop ever since. I can however get into recovery but no luck there. None of the backup zips will flash and I am in CWM 5.0.2.7. I normally will just flash back to stock in an instance like this but now Odin wont even come up with a COM when i plug it in. I also have tried Heimdall to no avail. All it says under Recovery is
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/reovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
Any ideas, I am willing to try anything
cwm 5.x is CM9.
CM10/JB has cmw 6.x
it's hard to tell how you got from jb cmw 6 to ics cmw 5 .
it's possible your partitions are also messed up.
you may need to start over with a return to stock package via Odin or Heimdall.
qkster said:
cwm 5.x is CM9.
CM10/JB has cmw 6.x
it's hard to tell how you got from jb cmw 6 to ics cmw 5 .
it's possible your partitions are also messed up.
you may need to start over with a return to stock package via Odin or Heimdall.
Click to expand...
Click to collapse
I read somewhere about trying a jig since I can't get into download mode, I just ordered one online, hopefully that will help me to return to stock. Thank you!
valcat22 said:
I read somewhere about trying a jig since I can't get into download mode, I just ordered one online, hopefully that will help me to return to stock. Thank you!
Click to expand...
Click to collapse
np..if you are stuck in a constant samsung boot loop and cant get into download mode, it may be your power button.
look in the q/a threads if you think it may be your pwer button.
without power button issue, you should be able to get to DL mode..
getting
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/reovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
though i can get back to stock via odin to 2.3 and it boots fine.
really confused ????

[Q] CWM Recovery Solution need help!

Firstly I hope this is the right subforum for this post.
So I am pretty much stuck with a brick atm( can make calls / texts ) and I am not sure where I went wrong.
I went and unlocked my phone, unlocked the bootloader and installed CWM.
But when I went to flash a ROM and Gapps I encountered a problem
When I went to go and wipe data and cache I got these errors.
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I still proceeded to go ahead and try and flash Gapps and Liquidsmooth ROM.
When I selected to reboot after the flash my phone did nothing.
The screen was black and I was forced to reboot with Volume up/ Power.
Now I have found a thread in a sub forum of another phone but was hoping to find a Razr HD XT925 specific fix,
I will link the forums for reference but I am worried I may have bricked my phone.
When I do get it to boot it is practically the stock ROM but no Gapps, some buttons dont work.
reference links :
http://forum.xda-developers.com/showthread.php?t=1713419
http://forum.xda-developers.com/showthread.php?t=1492940
I hope someone can help me fix this issue
Thankyou in advance.
EDIT: I also cant get my phone to recognise that it is in fact in USB debugging mode and I wasn't able to re run the Motopocalypse and Motochopper
Draper12 said:
Firstly I hope this is the right subforum for this post.
So I am pretty much stuck with a brick atm( can make calls / texts ) and I am not sure where I went wrong.
I went and unlocked my phone, unlocked the bootloader and installed CWM.
But when I went to flash a ROM and Gapps I encountered a problem
Click to expand...
Click to collapse
Someone here might have an easier fix, but you could try Matt's utility to bring it back to stock and start again.
http://forum.xda-developers.com/showthread.php?t=2307439
JohnT
Harley_Rider said:
Someone here might have an easier fix, but you could try Matt's utility to bring it back to stock and start again.
http://forum.xda-developers.com/showthread.php?t=2307439
JohnT
Click to expand...
Click to collapse
This worked perfectly! Thankyou so much for the link and reply

[Q] N8010 Stuck on Boot. Problem with Recovery

Hi guys, I really hope u can help me, cause i admit i did my share of research and got no solution
My N8010 was using GNABO 6.5 and Boeffla Kernel. While using it the other morning, the tablet suddenly rebooted and got stuck on the Galaxy Note screen. It stays on it a few seconds then reboot to the same screen in a loop.
I can access the recovery menu (CWM 6.0.3.6 ) but my options there are pretty limited, cant wipe and cant install zip files. At the botton of the recovery i have the following logs:
Warning: no file_contexts
E: Can´t open /cache/recovery/log
E: Can´t open /cache/recovery/log
E: Can´t open /cache/recovery/last_log
E: Can´t open /cache/recovery/last_log
I read somewhere that the problem should be solved if i could install a new recovery through Fastboot. Problem is fastboot cant find my device when on bootloader (but i can find it through ADB).
Using ADB sideload to install new recovery or new ROM gave me error on CWM.
Please, save my Tabye. :crying:

Categories

Resources