Related
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03_M_release_199410_signed
and when i run it after some step it goes to Hboot and in the pc it says customer id error ERROR 131
and say my cid have error
After that my phone go to Hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
I can solve this problem with other Ruu but I want to install this rome for some reason
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
I cant change my cid with super cid or any other cid
Just How Can I flash THIS rom?
Is this question so hard? no answer after 27 view?
Goldcard ?
If you've not tried the goldcard method yet try that.
And make sure not to use GoldCard Helper's built in Menu > Copy CID tool, because for me it copied the wrong one. The CID for MMC2 is the one you need.
@ayene
I replied to your other thread how to create a gold card, you have ignored that.
I am unsure if you are unable to boot into the ROM but I am assuming you are booting directly into fastboot and cant.
You can fix your problem by one of these methods.
1) Download this RUU and install it, then create a goldcard (by using your phone, since you are now able to boot into the ROM) and then install the RUU you are trying to install in your post.
2) Create a gold card on the PC have a look here then install the RUU in your first post.
foX2delta said:
@ayene
I replied to your other thread how to create a gold card, you have ignored that.
I am unsure if you are unable to boot into the ROM but I am assuming you are booting directly into fastboot and cant.
You can fix your problem by one of these methods.
1) Download this RUU and install it, then create a goldcard (by using your phone, since you are now able to boot into the ROM) and then install the RUU you are trying to install in your post.
2) Create a gold card on the PC have a look here then install the RUU in your first post.
Click to expand...
Click to collapse
No man. I don't ignore that. With your nice help I can install ruu and other thing. I thank u very very Much. Just I don't know how to install the special ruu. OK. U said use gold card. OK I will try it. Thank a lot.
I use goldcardtool not GoldCard Helper and make a goldcard. But when i want to install the RUU it said cid code error. Please Help.
@ayene
Go the the market, get the app GoldCard Helper, the app you used only has the options for mmc0/1. If you look at post 4 in this thread it says use mmc2 i.e. "adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid"
So get the app here, then use the mmc2 number. NOT MMC0!!!
foX2delta said:
@ayene
Go the the market, get the app GoldCard Helper, the app you used only has the options for mmc0/1. If you look at post 4 in this thread it says use mmc2 i.e. "adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid"
So get the app here, then use the mmc2 number. NOT MMC0!!!
Click to expand...
Click to collapse
I will do that after my work(Job) finishe. what is different between mmc0 or 1 or 2?
mmc0 is your phones physical memory (where the system lives/apps are installed/user data etc.) mmc2 is the memory card.
oh no
again it say customer id error.
let me say my problem maybe another solution.
I flash almost all the ported ics roms. in all of them , wifi dont work. it says enabling and stay on it. i cant connect to any wifi. one of the man had same problem and he said if i flash this ruu and ofter that the ics , wifi will work. but I cant install the RUU.
foX2delta said:
mmc0 is your phones physical memory (where the system lives/apps are installed/user data etc.) mmc2 is the memory card.
Click to expand...
Click to collapse
I did it but again cid error.
let me say why I want flash this RUU
i flash almost all ported ics rom for DS. and in all of them wifi dont work. other people dont have the problem . after a while i found a man with the same problem and after many exam ao change radio hboot he said if we flash this RUU it will be ok. But now I cant flash the RUU
ayene said:
I did it but again cid error.
let me say why I want flash this RUU
i flash almost all ported ics rom for DS. and in all of them wifi dont work. other people dont have the problem . after a while i found a man with the same problem and after many exam ao change radio hboot he said if we flash this RUU it will be ok. But now I cant flash the RUU
Click to expand...
Click to collapse
Did you unlocked your phone via htcdev?
If so, you maybe need to flash the boot.img separately after flashing the ROM (Ruu)
Sent from my Desire S using XDA App
eyahl said:
Did you unlocked your phone via htcdev?
If so, you maybe need to flash the boot.img separately after flashing the ROM (Ruu)
Sent from my Desire S using XDA App
Click to expand...
Click to collapse
I did that but not work. maybe I should both unlock and make goldcard?
the RUU dont flash so flash boot.img wont help, I think.
I mean after update radio and signing it says cid error. So just flash boot.img wont help.
Hello!
Just got my hands on a desire S from someone who said they bricked it, i dont think it is though.
I can access fastboot/HBOOT but it doesnt seem to have a custom recovery installed, shows the stock recovery or download mode logo, the screen goes blank and vibrates 7 times.
Every time i try to flash anything through fastboot it gives me the error in the heading
FAILED (remote: not allowed)
The ROM just doesnt boot and shows T mobile logo indefinitely (must be a bootloop) but the phone doesnt have any Tmo logos on the body.
more details
SAGA PVT SHIP S-OFF RL
HBOOT-0.98.0002
RADIO-3805.06.02.03_M
eMMC-boot
I read about ENG S-off but i dont know what this phone has, maybe its just radio S-OFF cos its Tmo and doesnt have a recovery though i dont understand what the 7 vibrates mean either.
little help please?
even more details
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.47.110.3
(bootloader) serialno: HT15TTJ01262
(bootloader) imei: 356708041646975
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 3653mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
7 vibrations most likely mean overheating, and this can't be cured by any means.
The phone is S-OFF, but doesn't have Engineering HBOOT - so you can't use fastboot, it won't allow you (just what it says).
Your best bet is to try a stock RUU and see if it helps.
Download a PG88IMG.zip from an eng hboot, copy it to root of sd (cardreader), boot to bootloader and let it do his job.
Afterwards delete the zip boot to bootloader once more and flash a recovery with fastboot.
I would use a ruu only if those steps fail.
Swyped because PC is under full load or to far away
Tectas said:
Download a PG88IMG.zip from an eng hboot, copy it to root of sd (cardreader), boot to bootloader and let it do his job.
Afterwards delete the zip boot to bootloader once more and flash a recovery with fastboot.
I would use a ruu only if those steps fail.
Swyped because PC is under full load or to far away
Click to expand...
Click to collapse
Hey Tectas I tried your method,
went here
http://forum.xda-developers.com/showthread.php?t=1178001
and got the first radio which had the same number as mine ie this one
From the 1.31.832.3 RUU:
20.28d.30.0805U_3805.04.02.01
says cid incorrect.
shall i try all the ones with 3805 in them? cos i really have no clue which one is right for me considering i dunno which RUU is compatible with this phone
raheeljessa said:
Hey Tectas I tried your method,
went here
http://forum.xda-developers.com/showthread.php?t=1178001
and got the first radio which had the same number as mine ie this one
From the 1.31.832.3 RUU:
20.28d.30.0805U_3805.04.02.01
says cid incorrect.
shall i try all the ones with 3805 in them? cos i really have no clue which one is right for me considering i dunno which RUU is compatible with this phone
Click to expand...
Click to collapse
No, not radio, leave it untouched yet, the hboot is what you need
Check my signature, I personally would recommend this one
Swyped because PC is under full load or to far away
even for this PG88IMG.zip which is the 1mb hboot file it says cid incorrect update fail press power to reboot
Tectas said:
No, not radio, leave it untouched yet, the hboot is what you need
Check my signature, I personally would recommend this one
Swyped because PC is under full load or to far away
Click to expand...
Click to collapse
even for this PG88IMG.zip which is the 1mb hboot file it says cid incorrect update fail press power to reboot
Ok then try it with a ruu, sry that i took your time for nothing
Tectas said:
Ok then try it with a ruu, sry that i took your time for nothing
Click to expand...
Click to collapse
how do i do that? sorry i seem to know nothing
Do you know from which regions your phone is?
Try in fastboot : fastboot getvar all, and Google your main version then download the appropriate file from this link
http://forum.xda-developers.com/showthread.php?t=1002506
Once you are sure you have the right RUU, you might have to make a goldcard to get rid of the CID error
The whole point of having "right" RUU is to avoid this error - having RUU for his specific region gets rid of CID error message. Otherwise he just needs any RUU and goldcard.
Jack_R1 said:
The whole point of having "right" RUU is to avoid this error - having RUU for his specific region gets rid of CID error message. Otherwise he just needs any RUU and goldcard.
Click to expand...
Click to collapse
I have what seems to be the right RUU..
now when i try to install it, the RUU installer hangs and the phone also hangs.
I should reiterate that my phone DOES NOT BOOT into the rom, has what may be boot loop error. If i could access android i wouldnt be asking any of these questions as from in there all this is easy peasy!
i'm trying booting into Hboot and fastboot to install this. as far as i remember it doesnt work here so how else can i go about it?
once again, no custom recovery, no eng bootloader, no working android rom
Thanks to all of you who tried to help by the way
raheeljessa said:
I have what seems to be the right RUU..
now when i try to install it, the RUU installer hangs and the phone also hangs.
I should reiterate that my phone DOES NOT BOOT into the rom, has what may be boot loop error. If i could access android i wouldnt be asking any of these questions as from in there all this is easy peasy!
i'm trying booting into Hboot and fastboot to install this. as far as i remember it doesnt work here so how else can i go about it?
once again, no custom recovery, no eng bootloader, no working android rom
Thanks to all of you who tried to help by the way
Click to expand...
Click to collapse
3 possibilities:
1. Let the ruu run without attached device till the only option is to close the program, search in your temp folder for the rom.zip, copy it to another folder, close the program, copy it to sd and try to flash it the same way you did before with the hboot (rename the rom.zip to PG88IMG.zip before you flash it)
2. Do the same like at 1. but create a goldcard before
3. Do the same I described before with hboot, but create a goldcard before
Swyped because PC is under full load or to far away
If the RUU installer hangs - your chances aren't too good.
If it hangs on "rebooting to bootloader" - boot to FASTBOOT manually and start RUU while in fastboot mode.
If it hangs updating - chances are you're another case of faulty eMMC.
gave the phone to some guy in the market. says he'll take 5£ to open it and check it out and let me know whats wrong.
the RUU rom.zip file when renamed to pg88img.zip or whatever does work as its the only zip file it detects in hboot mode,
it starts the update, heats up like an angry mountain and then sucks its battery off..
thanks you guys for all the help. I'll update you on what was the actual problem when this guy tells me so you know what these symptoms are for in future
Have you tried using the gold card? As it has already been stated that it should get rid of the wrong cid issue.
Sent from my HTC Desire S using XDA
Hi,
I'm having a bootloop on my sensation xe. I never used a custom rom or anything, and last week i got the following error while updating an app:
"Couldn’t install on USB storage or SD card" I rebooted my phone, and then i got stuck in a bootloop (booting till the htc logo, then rebooting).
I tried to flash a stock RUU from fastboot following this guide http://forum.xda-developers.com/showthread.php?t=1672425 . The command line showed no errors while flashing, but this didn't help.
Also flashing 4ext and cwm recoveries didn't work, the commandline showed no errors, but on the screen of my phone the little progress bar on the upper right side never got filled, and the recovery just goes straight to the htc logo, and then rebooting again..
Version:
Relocked
Pyramid pvt ship s-on rl
hboot-1.29.0000
eMMc-boot
cid: HTC__E11
mid: PG5813001
Is there anything else i can try, or should i send it out to be repaired?
Thanks in advance!
First_FLT said:
Hi,
I'm having a bootloop on my sensation xe. I never used a custom rom or anything, and last week i got the following error while updating an app:
"Couldn’t install on USB storage or SD card" I rebooted my phone, and then i got stuck in a bootloop (booting till the htc logo, then rebooting).
I tried to flash a stock RUU from fastboot following this guide http://forum.xda-developers.com/showthread.php?t=1672425 . The command line showed no errors while flashing, but this didn't help.
Also flashing 4ext and cwm recoveries didn't work, the commandline showed no errors, but on the screen of my phone the little progress bar on the upper right side never got filled, and the recovery just goes straight to the htc logo, and then rebooting again..
Version:
Relocked
Pyramid pvt ship s-on rl
hboot-1.29.0000
eMMc-boot
cid: HTC__E11
mid: PG5813001
Is there anything else i can try, or should i send it out to be repaired?
Thanks in advance!
Click to expand...
Click to collapse
unlock again your bootloader with the unlock token.bin code
then see this thread to install roms with S-ON
http://forum.xda-developers.com/showthread.php?t=1631861
rzr86 said:
unlock again your bootloader with the unlock token.bin code
then see this thread to install roms with S-ON
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
Thanks for your reply.
But like I said, flashing 4EXT recovery is not working. It seems to flash ok (no errors), but when i try to access the recovery it just skips to the boot loop again.
First_FLT said:
Thanks for your reply.
But like I said, flashing 4EXT recovery is not working. It seems to flash ok (no errors), but when i try to access the recovery it just skips to the boot loop again.
Click to expand...
Click to collapse
did you try to install the recovery with unlocked bootloader?
because with relocked it won't work
edit:try to install 4ext using step 2 from the guide i linked to you if you haven't done it already
rzr86 said:
unlock again your bootloader with the unlock token.bin code
then see this thread to install roms with S-ON
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
rzr86 said:
did you try to install the recovery with unlocked bootloader?
because with relocked it won't work
edit:try to install 4ext using step 2 from the guide i linked to you if you haven't done it already
Click to expand...
Click to collapse
Yes, i tried with unlocked bootloader and just like that step from the guide. After that i tried to flash again a stock ruu so that's why the bootloader was relocked again.
what firmware do you have?
which ruu did you use?
rzr86 said:
what firmware do you have?
which ruu did you use?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.153
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3778mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I tried :
rmk-pyramid-stock_ics_3.32.401.3-v1
OTA_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105-1.73.401.4
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.153_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_281004_signed
the last one it was suppose to work
that is what you need.nevermind
re-run ruu again and see this time if it will work
also did you do a factory reset?
rzr86 said:
the last one it was suppose to work
that is what you need.nevermind
re-run ruu again and see this time if it will work
also did you do a factory reset?
Click to expand...
Click to collapse
Running the ruu again now. I did try a factory reset, but again it jumps straight to the htc logo and then loops again
Edit: Same thing, rom update successfull, but keeps boot looping.. I did notice that the update seem to jump from 65% to 100% very fast, could that mean something?
You have latest hboot (1.29), AFAIK it cannot be completely unlocked.
Also, it is 'Relocked' ? Use htc dev token to unlock it again, than flash 4ext, and use it with 'smartflash' turned on.
Sent from my HTC Sensation Z710e using xda premium
Like i said, i cant seem to flash 4 ext. It gives no errors on flashing, but i cant enter the recovery
First_FLT said:
Like i said, i cant seem to flash 4 ext. It gives no errors on flashing, but i cant enter the recovery
Click to expand...
Click to collapse
give a try with another recovery like cwm
i am out of ideas...
rzr86 said:
give a try with another recovery like cwm
i am out of ideas...
Click to expand...
Click to collapse
I tried cwm allready, same as 4ext. I guess this means off to the repair guy :crying:
see if you can boot to recovery
fastboot boot recovery.img
if booted to recovery ..try to flash a custom rom and see
ganeshp said:
see if you can boot to recovery
fastboot boot recovery.img
if booted to recovery ..try to flash a custom rom and see
Click to expand...
Click to collapse
Same thing:
downloading 'boot.img'...
OKAY [ 1.498s]
booting...
OKAY [ 0.000s]
finished. total time: 1.498s
But phone jumps to htc logo and then keeps looping
First_FLT said:
Same thing:
downloading 'boot.img'...
OKAY [ 1.498s]
booting...
OKAY [ 0.000s]
finished. total time: 1.498s
But phone jumps to htc logo and then keeps looping
Click to expand...
Click to collapse
Ruu also didn't worked right? Then mostly a hardware issue.. If you are soff you could try gingerbread rom.. But that's not the case
Sent from my HTC Sensation using xda premium
Hi all!
Im in a big pickle here and I cant get myself out at the moment.
First hand.. The info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.13.0000
(bootloader) version-baseband: 0.17.31501S.10_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3917mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d92cc658
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.093s
Now i've been running cyanogenmod 10 stable since I started rooting etc...
And it's been amazing, but now since there has been a release candidate for 10.1, I was looking into updating it.
I ran into an issue where my boot-loader was not accepted , therefor i would run into an error on Clockwork mod stopping me from flashing 10.1
The bad thing was that I erased my previous installation without backing up the stock and CM10.
So now i'm left with no system. Though I can get into Fastboot and ADB via recovery.I
For some reason if I try to flash CM10 (The rom and the boot file) the cyanogenmod logo will continue spinning.
I tried to fiddle around with my RUU afterwards because I currently have S-On. But i later learned that i need superCID.
^(Which i learned that you need your phone on to alter it to the 8 "1"s) Which i cant do because i have no system.
I might have already altered some files guessing that my boot-loader is named "dirty-d92cc658" and im afraid that I messed up something internally.
So anyways. Im here with my Ville S4 plugged in on fastboot not knowing what to do.
Any Help would be amazing , thank you
Did you try a RUU for Rogers? Not sure if there is one but try to find a RUU that matches your cid
c19932 said:
Did you try a RUU for Rogers? Not sure if there is one but try to find a RUU that matches your cid
Click to expand...
Click to collapse
Do I need to have superCID to flash RUU's ?
Mozziliac said:
Do I need to have superCID to flash RUU's ?
Click to expand...
Click to collapse
If you have a RUU for your specific phone, no, you just need to lock the bootloader.
Have USB debugging turned on (unless running ruu when your phone is in fastboot usb mode)
If you can't find one for Rogers, then yes you have to be super cid to run another RUU.exe (after that change your cid back so an OTA update doesn't brick your phone)
If your phone is on Jellybean, you need to run a JB ruu, if it's Ice Cream Sandwich it won't run. Unless you are supercid I guess.
Khan.orak has a guide for OTA zips to return to stock that you might want.
http://forum.xda-developers.com/showthread.php?p=44365370
Ville / VilleC2 RUU, OTA and Stock Nandroid Collection
http://forum.xda-developers.com/showthread.php?t=2200930
tivofool said:
If you have a RUU for your specific phone, no, you just need to lock the bootloader.
Have USB debugging turned on (unless running ruu when your phone is in fastboot usb mode)
If you can't find one for Rogers, then yes you have to be super cid to run another RUU.exe (after that change your cid back so an OTA update doesn't brick your phone)
If your phone is on Jellybean, you need to run a JB ruu, if it's Ice Cream Sandwich it won't run. Unless you are supercid I guess.
Khan.orak has a guide for OTA zips to return to stock that you might want.
http://forum.xda-developers.com/showthread.php?p=44365370
Ville / VilleC2 RUU, OTA and Stock Nandroid Collection
http://forum.xda-developers.com/showthread.php?t=2200930
Click to expand...
Click to collapse
How can I superCID my phone if I cant boot into the rom?
I've never superCid, can't help you there.
Good news is you can get into bootloader still.
You could fastboot flash a boot.img and flash a rom in recovery.
Just need to mount usb storage in recovery to put the rom.zip on your phone.
Edit: reread that you tried that but rom didn't boot. Hopefully you waited 5-10 min for first load.
try wipedata/factory reset from CWM like 3 times then flashing?
Good luck to ya.
Edit 2: kind of wondering if you can run the Rogers RUU with that low of a bootloader (version-bootloader: 1.13.0000)
Maybe someone can chime in, because that would be nice not having to SuperCid.
Alright so I seemed to get it running on CM 10 by switching recoveries and flashing it's boot.
Then I was able to superCID the phone, which then lead my into S-off'ing it.
Then I was able to update the hboot firmware to 2.15
Cleared the cache and installed the new kernel and flashed cyanogenmod 10.1 rc
Everything went well after that. I did run into a laggy issue, which I then fixed by switching the CPU governor to ondemand instead of interactive.
Thanks for the post guys
Hi guys,
Try find couple days solution, but nothing. I have problem with my htc. I try write new ROM but I think i made something wrong. Phone is restarts on Htc logo. I try wrote ViperSV_1.5.0. It looks like it finished good but it dont starts.
version: 0.5
version-bootloader: 2.00.0000
version-baseband: 1.15.40a.00.04
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: **************
imei: *****************
product: k2_ul
platform: HBOOT-8930
modelid: PL8010000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 3681mV
partition-layout: Generic
security: on
build-mode: SHIP
Try reinstall recovery.img boot.img but it is the same problem. Please can somebody help.
How did you flash the boot.img?
Did you try another rom?
Thanks for your answer. I flash it with cmd. Fastboot boot flash boot.img
Make sure that you write the cmd correct:
fastboot flash boot boot.img
Sorry i wrote wrong but I flashed like you wrote.
Have you tried another rom?
I had try stock Rom. Check photo please.
Sorry, but what recovery are you using?
I don't think that a v2.8.1.0 TWRP recovery exist for k2ul. Where do you have it from?
http://forum.xda-developers.com/showthread.php?t=2766186
http://forum.xda-developers.com/showthread.php?t=2766186
I donwload this one what twrp i must download if this one is wrong for me?
Omg, this is for a totally different device!
Lets hope you did not damage any important partition with this.
Follow the link in my signature to my index thread, you will find almost on the top a link to a thread with working recovery. Use the recovery from first post, the second post is for boost mobile only.
old.splatterhand said:
Omg, this is for a totally different device!
Lets hope you did not damage any important partition with this.
Follow the link in my signature to my index thread, you will find almost on the top a link to a thread with working recovery. Use the recovery from first post, the second post is for boost mobile only.
Click to expand...
Click to collapse
C:\fastboot>fastboot flash recovery TWRP-2.7.0.1-k2_ul-k2u.img
sending 'recovery' (8452 KB)...
OKAY [ 1.028s]
writing 'recovery'...
OKAY [ 2.249s]
finished. total time: 3.300s
trying install ROM k2ul_4.2.2_3.11.401.1_stock_odexed_v3 and its successful. But it restarts. I must reflash boot.img ?
You must always flash the boot.img when you are S-on!
yes I flash boot.img from zip file but problem the same. Have you more solutions?
Try another rom. If its still the same, you maybe killed something with your wrong recovery.
old.splatterhand said:
Try another rom. If its still the same, you maybe killed something with your wrong recovery.
Click to expand...
Click to collapse
and it is not possible fix it? I try ViperSV_1.5.0 Rom and its the same problem. Restarts on HTC logo.
It does not even boot into Android OS?
No. It turns on and it shows HTC ONE logo and than after ~5 seconds it restarts. Again and again.
You can try to reflash firmware, maybe this can help: http://d-h.st/uwh You need to be (re)locked to get this working!
Download this file, rename it to PL80IMG.zip and copy it to your external sd.
Boot into bootloader, let it scan for files and confirm to flash with vol+ as it asks for.
Wait til it is finished, it can take some minutes.
After that, unlock again, reflash twrp recovery, rom and boot.img.