I have a Samsung galaxy note 10.1 GT-N8013EAYXAR
I had a problem with the firmware and decided to go to the samfirmware site and download the firmware. Result: this firmware N8013UEALI3 works if I do not install the updates the tablet. If you install the tablet does not boot (only displays Samsung galaxy note 10.1 in the beginning).
Decided to install all the others.
result:
N8013UEUCMA3 -> wont boot (without installing any update)
N8013UEUCMB3 -> wont boot (without installing any update)
N8013UEUCMC2 -> wont boot (without installing any update)
N8013UEUCMD3 -> wont boot (without installing any update)
That is when I install these 4 firmwares they do not work in first time.
I installed the firmware as these rules indicate http://forum.xda-developers.com/showthread.php?t=2080366
PS: I try to fix with Samsung kies and does not work.
How can I solve this problem any idea? (Already tried factory reset etc ...)
problem with up rom
CloudPTs said:
I have a Samsung galaxy note 10.1 GT-N8013EAYXAR
I had a problem with the firmware and decided to go to the samfirmware site and download the firmware. Result: this firmware N8013UEALI3 works if I do not install the updates the tablet. If you install the tablet does not boot (only displays Samsung galaxy note 10.1 in the beginning).
Decided to install all the others.
result:
N8013UEUCMA3 -> wont boot (without installing any update)
N8013UEUCMB3 -> wont boot (without installing any update)
N8013UEUCMC2 -> wont boot (without installing any update)
N8013UEUCMD3 -> wont boot (without installing any update)
That is when I install these 4 firmwares they do not work in first time.
I installed the firmware as these rules indicate http://forum.xda-developers.com/showthread.php?t=2080366
PS: I try to fix with Samsung kies and does not work.
How can I solve this problem any idea? (Already tried factory reset etc ...)
Click to expand...
Click to collapse
problem with up rom
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_u ser_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Please help me.
Related
My Galaxy Tab P6200 always stuck on bootloop mode after installation of CM9 ICS ROM. I update this via odin & its getting pass from odin. But while I try to wipedata/factory reset from recovery mode it cannot perform, after sometimes it automatically rebooted & stuck on bootloop page. Though download mode & recovery mode is available & Stock ICS & HC ROM installation success via odin, my device cannot boot successfully. I will try several times with diffrent stock ROM but cannot success.
NB: Stock pit not work, I found a patched pit for p6200 which works. with stock pit update always stuck on factoryfs.img
I want urgent help, please help me if you have any solution. sorry for my bad english & advance thanks for your help.
ive been having trouble with my P6200 too... the thing is that i flashed a ICS rom that actually worked but made some other tweaks to made the tab having errors... now ive been having this boot loop at the samsung galaxy logo and wont proceed... im still able to use the stock recovery & download mode is still working fine but somehow i could not make it work again...
i need help for my device...
thanx
I'm having a bootloop problem also
I flashed stock 4.1.2 jb! I first wipe/format everything using 6.0.2.7 CWM flashed stock jb 3 times already pass on all of them three.. but it seems to be still in a bootloop. It passes samsung logo then goes black no sign of the second blue logo that comes out.. When I flash CWM it flashes but the stock jb rom doesn't work..
Hi, I'm kind of new here and i'm trying to figure out where i can get and how i would install the galaxy tab 7.0 plus stock recovery using ODIN. I tried installing CM10.1 and i got stuck on boot screen, so I used ODIN to flash in the official 4.1.2 JB and now after the samsung screen the tab goes dark then bootloops. I read in a troubleshooting site that flashing in the stock recovery would fix that but they didn't put up any download links or tutorials. I'm stumped.
sjkeri said:
Hi, I'm kind of new here and i'm trying to figure out where i can get and how i would install the galaxy tab 7.0 plus stock recovery using ODIN. I tried installing CM10.1 and i got stuck on boot screen, so I used ODIN to flash in the official 4.1.2 JB and now after the samsung screen the tab goes dark then bootloops. I read in a troubleshooting site that flashing in the stock recovery would fix that but they didn't put up any download links or tutorials. I'm stumped.
Click to expand...
Click to collapse
If you go into the recovery mode and go through with a factory reset, there is a possibility it will fix the boot loop. At least with my Galaxy Ace it fixes the boot loop after restoring the stock firmware.
Hello everybody,
I just bought my new galaxy s4 i9506,
and i wanted to install the new android lollipop 5.0.1 rom from sammobile,
so i've installed CWM 6.0.4.5 with odin 3.10 and wiped all the data & cache,
and i've restarted my phone into dowloading mode,
and i've installed the rom,
when the installation have finished,
the phone restared and blocked in the galaxy logo screen
please help !!!
it's like:
-----------------------------------------------------------
RECOVERY BOOTING.......
Samsung
GALAXY S4
GT-I9506
gueabd said:
Hello everybody,
I just bought my new galaxy s4 i9506,
and i wanted to install the new android lollipop 5.0.1 rom from sammobile,
so i've installed CWM 6.0.4.5 with odin 3.10 and wiped all the data & cache,
and i've restarted my phone into dowloading mode,
and i've installed the rom,
when the installation have finished,
the phone restared and blocked in the galaxy logo screen
please help !!!
it's like:
-----------------------------------------------------------
RECOVERY BOOTING.......
Click to expand...
Click to collapse
Reflash the firmware from sammobile, you might need to wipe the device
I updated via settings panel to the new firmware and my tablet stopped working afterwards and is stuck on samsung logo. I can still enter CWM Recovery but wipe data and cache does not work. I tried flashing original rom via download mode and odin and nothing works. Also tried flashing via CWM from the sd and the tablet crashes and restarts itself. I took my tablet to samsung and they told me that my processor was locked( What?) and the tablet cannot be fixed. Please help me!
Recovery mounts and storage .
Format everything .
Boot to download mode and flash stock rom .
But if Samsung are right its not going to fix the problem .
JJEgan said:
Recovery mounts and storage .
Format everything .
Boot to download mode and flash stock rom .
But if Samsung are right its not going to fix the problem .
Click to expand...
Click to collapse
Have already tried 4.2.2 stock and 4.1.2
I have a problem with my samsung galaxy s7. So i wanted to install a custom rom. It went wrong but there were no worries because i could still unlock twrp custom recovery. I had made a backup of my rom, i forgot to wipe the phone and then it got bricked. Now i can't unlock custom recovery and i have tried installing the firmware of my samsung galaxy s7 (android 8.0 oreo). It didn't work with odin because at failes the entire time. Trying a few times and i got another error: the error that says i should download samsung switch and do a emergency reboot. So I installed the smart switch software But it doesn't recognise my phone when I'm in download mode.
my SD card isn't corrupted. PLEASE HELP!!!!
Lars
Flash latest January firmware with Odin.