Hello everyone,
I know this topic has been discussed in the past, so, this question is not about what model is compatable with the HDMI adapter, I have a Samsung tab 2 10.1 P5113, and I know this model is HDMI or HDTV compatible, but I can't seem to be able to make my tab work with my TV, I have the ZAP BLASTER 2.2 rom installed, but so far, no cigars, can someone tell me or direct me and tell me what rom or kernel has had success using the hdmi adapter? I know ketut.kumajaya posted that he uses a dual boot kernel and uses blaster to make the hdmi work, but I can't seem to make it work at all, please any help.
Related
Hi all.
I would like to know is SGR GT-I9103 is compatible with MHL adapter?
Has anyone tired before?
what brand? original or OEM/3rd party?
post some pics if u guys have any..
Thanks!
krobar77 said:
Hi all.
I would like to know is SGR GT-I9103 is compatible with MHL adapter?
Has anyone tired before?
what brand? original or OEM/3rd party?
post some pics if u guys have any..
Thanks!
Click to expand...
Click to collapse
Compatible with MHL adapter?
Officially: No. Samsung says i9103 can not do mhl.
I have tried it with a original samsung mhl adapter for the S II.
I did not get a signal.
But..... tegra 2 supports mhl.
So, do we support it in hardware but they did not activate it in software?
Can the devs activate it with a custom rom or kernel?
Has to be checked out.
so it is confirm SGR does not suuport MHL and there is no way to connect this phone to LCD TV via HDMI at all?
legion1911 said:
Compatible with MHL adapter?
Officially: No. Samsung says i9103 can not do mhl.
I have tried it with a original samsung mhl adapter for the S II.
I did not get a signal.
But..... tegra 2 supports mhl.
So, do we support it in hardware but they did not activate it in software?
Can the devs activate it with a custom rom or kernel?
Has to be checked out.
Click to expand...
Click to collapse
The devs might need to make a kernel that supports HML
Herpderp DXKPB.
Does this Tab has HDMI support via the adapter?
I tried with my adapter from the Tab 7 plus but nothing i showing up on the screen.
I could not find any mention of HDMI support in the Samsung official product page.
Samsung Galaxy Tab HDTV Adapter EPL-3PHPBEG
Is this the adapter you tested?
I hope it works, as I have it on order.
I don't think the tab 2 has tv-out capabilities. I thought it did, but phonearena doesn't have them listed http://www.phonearena.com/phones/Samsung-GALAXY-Tab-2-7.0_id6929
bark777 said:
Samsung Galaxy Tab HDTV Adapter EPL-3PHPBEG
Is this the adapter you tested?
I hope it works, as I have it on order.
Click to expand...
Click to collapse
Yes this is the one and it doesn't work.
I don't think Samsung enabled this feature to save on costs.
Well DLNA/AllShare works great with my BR and the TV both but I was hoping that HDMI would work too.
Just off chat with Samsung support:
"Yes, the tab will support the HDMI connection using the HDTV adapter, however; I'm sorry to inform you that there are no accessories available for the tab as of now but it will be available and updated soon."
Moved to Q&A section....place all questions in the proper sections.
Thanks
I have that same HDMI adapter and can confirm that it does definitely NOT WORK.
hdmi & manual
I bought the hdmi adapter yesterday and also found it did not work. However in the Samsung manual it says: "Supports HDMI/MHL connections to connect electronic devices to high-definition televisions (HDTVs) and displays".
So, I am not sure if they plan a new adapter and I should return this one of if it will be some sort of software patch to allow it to function...
Anyway, for those interested, here is the Samsung the tab 2 7.0 user manual.
downloadcenter.samsung.com/content/UM/201204/20120427002407751/Generic_Wi-Fi_GT-P3113_Galaxy_Tab_2_English_User_Manual_LD3_F3.pdf
-----------------------------------
* New info from Samsung Support...
Just received the call and they have been testing the Tab2 7.0 in the support dept. (no one else must know the answer) and I have been officially told that the current 30 pin hdmi adapter "Does Not Work with this tablet"! They have no idea if a new adapter will surface or when.
This is not on sale in Canada yet, but I one site has it listed for pre-order and lists it does have hdmi support but via an adapter.
So either it's wrong or samsung changed the adapter to be used. I really wish they'd just put in a micro-hdmi port instead of adapters. But I'd like to hear/confirm that at least an adapter will work.
The tab 2 10.1 does work with the original hdmi adapter. I tested it today.
Sent from my GT-P5113 using XDA Premium HD app
Galaxy Tab 2 7.0
Does anyone know if the HDMI adapter (official) works in the Galaxy Tab 2 7.0? or maybe you can give a link of one adapter that works...
Sorry for my english, im from Honduras.
It would be great if TV out worked on the tab 2 7.0inch. When I bought it I thought that it had those capabilities, but I am unsure if it does. If anyone gets it working let us know.
I don't think it works. Not for now. Tested it before and no luck.
Sent from my GT-P3113 using Tapatalk 2
Same here: bought it, it won't work and even worse, it unmounts my micro sd card to be able to potentially mount a sd card.
They really totally ****ed up on that one... it's not even written on the adapter box. It plugs in like it were compatible, but it just won't work.
jaaka78 said:
The tab 2 10.1 does work with the original hdmi adapter. I tested it today.
Sent from my GT-P5113 using XDA Premium HD app
Click to expand...
Click to collapse
Since you're the only one who says it DOES actually work... which cable did you use?
I tested the Tab 7" dock, but hdmi didn't work. However, charging and audio do work.
Mynasru said:
I tested the Tab 7" dock, but hdmi didn't work. However, charging and audio do work.
Click to expand...
Click to collapse
Is this the dock you are talking about?
http://www.amazon.com/Samsung-Galaxy-HDMI-Multi-Media-Desktop/dp/B004DB7ZZK
It would suck if the SGT2 doesn't support HDMI.
bark777 said:
Samsung Galaxy Tab HDTV Adapter EPL-3PHPBEG
Is this the adapter you tested?
I hope it works, as I have it on order.
Click to expand...
Click to collapse
And... Did it work?
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
The funny thing is that Samsung put a note in the Galaxy Tab 2 to bring their accessories under the buyers attention.
On that note is the HDMI adapter.
Strange people, those at Samsung.
I bet the tab 2 7inch is like the galaxy s3, it needs the new hdmi adapter thats coming out.
no
the answer is no
Hi,
I recently purchased the Samsung EPL-3FHU MHL adapter for my SGS3. I can't get it to work at all. I know that older AOSP ROMs didn't support MHL (like CM 7), but surely they do by now? I have the right adapter, the 11 pin one. Hell I even have an old one with a 5-to-11 pin adapter.
Is it because of the ROM, kernel, or because I don't have a charger connected to it?
Side question to whomever knows the answer to OP's question: does a standard MHL adapter work with CM10 or does the S3 hardware require the Samsung adapter?
Sent from my SCH-I535 using xda app-developers app
mikejr83 said:
Side question to whomever knows the answer to OP's question: does a standard MHL adapter work with CM10 or does the S3 hardware require the Samsung adapter?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
A standard one does work if you have a 5-pin-to-11-pin converter I think, but I got that from Samsung.
CKyl22 said:
Hi,
I recently purchased the Samsung EPL-3FHU MHL adapter for my SGS3. I can't get it to work at all. I know that older AOSP ROMs didn't support MHL (like CM 7), but surely they do by now? I have the right adapter, the 11 pin one. Hell I even have an old one with a 5-to-11 pin adapter.
Is it because of the ROM, kernel, or because I don't have a charger connected to it?
Click to expand...
Click to collapse
As far as I'm aware, CM10 does not support MHL, only Samsung based ROMs work.
you def need the charger connected... unless your plugging it into a mhl suppported hdmi port on a tv which basically means you own one of 5 tv's that support it.
I am using ParanoidAndroid and the MHL connectivity works to an extent. What i mean is u can see the phone, browse, but video playback is glitchy. The video flickers and there is lag. Same is the problem with high graphic games. This has been bothering me for a while now. I wanted to use S3 as a game console with PS3 and SixAxis with GameKlip.
Works for me
This works for me just fine. I have the official mhl connector with the extension bit on the end. I am running CM10. The power thing got me at first.. Make sure you have it plugged in
Shawn: Are you on S3? What version of CM10 and what kernel?
shawn.hartke said:
This works for me just fine. I have the official mhl connector with the extension bit on the end. I am running CM10. The power thing got me at first.. Make sure you have it plugged in
Click to expand...
Click to collapse
What happened?
Anyone ever get an answer to this? Or just, what's the best ROM to maintain MHL capability?
Inky2783 said:
Anyone ever get an answer to this? Or just, what's the best ROM to maintain MHL capability?
Click to expand...
Click to collapse
I am running Liquidsmooth based on CM10.0 on Skyrocket and my phone DOES NOT run MHL. I bought a new TV to enjoy the feature which apparently is not there.
I Had Simliar Problem
I recently bought a generic mhl adapter off amazon for my Samsung Galaxy Skyrocket, sadly it did not work.
Phone:
Samsung Galaxy S2 Skyrocket
CM 10 (JB4.1.2)
Kernel that came with it
After browsing XDA I found a post that helped...
http://forum.xda-developers.com/showthread.php?t=1778270&page=379
Basically you need to add "ro.hdmi.enable=true" to your build prop. I used a build prop editor off the play store to do this.
It worked after this. Hope this works for you too. Good Luck.
(Remember to go thank the original poster zmore) (1st post for me YAY)
alee168 said:
I recently bought a generic mhl adapter off amazon for my Samsung Galaxy Skyrocket, sadly it did not work.
Phone:
Samsung Galaxy S2 Skyrocket
CM 10 (JB4.1.2)
Kernel that came with it
After browsing XDA I found a post that helped...
http://forum.xda-developers.com/showthread.php?t=1778270&page=379
Basically you need to add "ro.hdmi.enable=true" to your build prop. I used a build prop editor off the play store to do this.
It worked after this. Hope this works for you too. Good Luck.
(Remember to go thank the original poster zmore) (1st post for me YAY)
Click to expand...
Click to collapse
it seems cm10 doesnt support mhl. how about cm11?
Pacman ROM
Try Pac Man Rom
Someone has tested xbmc + hdmi adapter to a TV? Works fine?
As i know their is a big problem in our tabs with hdmi, it even does not work with stock roms
Sent from Galaxy S2 or Galaxy Tab2
We are waiting for the JB update, so hopefully the feature is enabled then.
What model do you have? The Gtab 2 .7.0 does not support HDMI, it does not have hardware for that function. Software will not fix it.
Hi i am interest to buy the galaxy tab p5110 but i have read it doesnt work the HDMI with the accesory.
And with cyanogenmod cm10.1 will work or not?¿