Database Info

[Q]rooting problem

Hello,
I have tried to root my sensation device, I used a guide to do that(forum didn't allow me to link cause I'm a new user), and everything looks fine, my phone says s-off and everything looks alright, however I tried to use titanuim backup, said it requires busybox, installed busybox, says "the su binary was not found on your phone", installed superuser, and tried to update the su binary, and it fails at "checking current install path" and I hit a wall. where have I gone wrong?
also I accidentally hit the SIM lock option on bootloader screen, I don't know what that does, so is this bad? and if so how I fix it.
If you have guessed that I'm a noob, you're right, I just got my first android phone a month ago.

come on people, give me something

reading more on the subject, i'm trying to redo installing recovery described in step 2 here as I said yes when the revolutionary utility asked me to..but the link is dead, so if anyone has another link..
also is it ok to do that? running another recovery..

dARTillery said:
reading more on the subject, i'm trying to redo installing recovery described in step 2 here as I said yes when the revolutionary utility asked me to..but the link is dead, so if anyone has another link..
also is it ok to do that? running another recovery..
Click to expand...
Click to collapse
Perform step2 and step3 in revolutionar s-off guide.

thanks for the answer.
Is that the same guide that I referred to? if so the links are dead and I can't post there yet. if not can you provide a link to the guide you mean.

dARTillery said:
thanks for the answer.
Is that the same guide that I referred to? if so the links are dead and I can't post there yet. if not can you provide a link to the guide you mean.
Click to expand...
Click to collapse
Yes that page . An older version of recovery is attched on that page. It can be downloaded here.
Now,
1. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
2. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen
3. Press Volume up to Accept when it asks" Do you want to start the update"
4. Press Power Off
5. Delete PG58IMG from your memory card
6. Reboot
Alternatively ,
If you have fastboot and adb setup on your pc then download the recovery from here.
Then flash it by the following command in fastboot
"fastboot flash recovery your-recovery-file.img"
After flashing recovery download the flashable su binary from here.
Put it the root of your sdcard.
Flash it via recovery.
Now you are root.
Note: **** If you get installation aborted while flashing su binary , do toggle signature 3 or 4 times . Then try again ****

oh thank you very much, you've been a great help, I'm now rooted, now onto trying to install a new ROM, god help me

try using the guide on the cyanogenmod website! It's the one i used and the one that seemed the most helpful

I've searched there for a while but couldn't find one, could you provide a link if its not too much trouble?

dARTillery said:
oh thank you very much, you've been a great help, I'm now rooted, now onto trying to install a new ROM, god help me
Click to expand...
Click to collapse
Great it worked. Hit some thanks button.

[Q] Please Help

I've got myself (and my tablet) into a complete mess.
When I got my tablet it was already unlocked and running ICS (I think).
I decided it was time to upgrade to cyanogenmod Kit Kat.
I started with this tutorial: http://wiki.cyanogenmod.org/w/Install_CM_for_tf700t
I flashed the custom recovery : "recovery-jb-644"
I chose "cm-10.2.0-tf700t" as I was nervous about the nightly. Something went wrong.
The tablet started but crashed after a few minutes and rebooted. I added "gapps-jb-20130813-signed" - it was worse - now the keyboard also crashed.
After that, I tried numerous things to recover it.
Now, I cant access it through the fastboot - it gives the serial number but won't push anything or flash anything.
I put the following on an sd card and tried to install from there but I get:
status 7 assert failed: write_raw_image (" /tmp/blob" , "staging )
or any number of similar messages. I tried the solution here: http://forum.xda-developers.com/showthread.php?t=1235724 which worked once but not again.
My current situation:
The picture attached shows the current installation - it will boot - I have no Google Apps - and it crashes within a minute and then reboots.
I'm not a complete newbie, but I cant find a simple explanation of what to do next.
I just want the tablet to work again, I don't care anymore if its Kit Kat, ICS, Jelly Bean or Honeycomb.... I even considered Linux...
Please help.

Apparently you missed the big fat red warning on the tutorial you linked. You need to install a 10.6.1.14.x bootloader.
(And you need to make sure your recovery is compatible with that bootloader, otherwise you risk a hard brick when you wipe data).

fivaics logical
_that said:
Apparently you missed the big fat red warning on the tutorial you linked. You need to install a 10.6.1.14.x bootloader.
(And you need to make sure your recovery is compatible with that bootloader, otherwise you risk a hard brick when you wipe data).
Click to expand...
Click to collapse
OK, so I've downloaded it, but I still can't install it because of the
status 7 assert failed: write_raw_image (" /tmp/blob" , "staging )
How do I get around this?
I attach a copy of the log showing what happens when I try.

ymget said:
OK, so I've downloaded it, but I still can't install it because of the
status 7 assert failed: write_raw_image (" /tmp/blob" , "staging )
How do I get around this?
I attach a copy of the log showing what happens when I try.
Click to expand...
Click to collapse
According to the page you linked, you are supposed to download a blob file and flash it via fastboot:
http://wiki.cyanogenmod.org/w/Install_CM_for_tf700t#Update_Bootloader_To_Compatible_Version
You didn't say yet in which way fastboot didn't work for you.

Hi,
Thank you for replying.
I can't do "fastboot -i 0x0B05 flash staging XX_bootloaderblob"
When I am in the CMD window, I can do fastboot devices and it see's my serial number, but as soon as I want to actually do something, it tells me the device is not available.
The same goes for any adb commands I want to do.
The only way I found of doing it is through the sideload, but now even this doesnt work.

Hi Again,
Your comment gave me an idea - I did the bootloader fastboot through the sideloader - and it worked!!!
I then added the "gapps-jb-20130813-signed" and now it is crashing on the setup wizard.... and the keyboard crashes.
Any ideas?

ymget said:
Hi Again,
Your comment gave me an idea - I did the bootloader fastboot through the sideloader - and it worked!!!
I then added the "gapps-jb-20130813-signed" and now it is crashing on the setup wizard.... and the keyboard crashes.
Any ideas?
Click to expand...
Click to collapse
Did you reboot after flashing the bootloader and before flashing gapps?

berndblb said:
Did you reboot after flashing the bootloader and before flashing gapps?
Click to expand...
Click to collapse
Yes, I had to check to make sure that the new bootloader worked and the tablet was no longer crashing before I installed the gapps.

ymget said:
Yes, I had to check to make sure that the new bootloader worked and the tablet was no longer crashing before I installed the gapps.
Click to expand...
Click to collapse
I really have no idea... I just checked - you did flash the gapps package for CM 10.2 and I assume you also checked the box "verify zip signature" in your recovery before you flashed gapps?
If not, it maybe as simple as a bad download....

berndblb said:
I really have no idea... I just checked - you did flash the gapps package for CM 10.2 and I assume you also checked the box "verify zip signature" in your recovery before you flashed gapps?
If not, it maybe as simple as a bad download....
Click to expand...
Click to collapse
You were right!! I downloaded the gapps again and now I have a perfectly working tablet.
Thank you to everyone who answered me and helped - you guys are amazing!!

ymget said:
You were right!! I downloaded the gapps again and now I have a perfectly working tablet.
Thank you to everyone who answered me and helped - you guys are amazing!!
Click to expand...
Click to collapse
:GOOD: Glad you got it working! BTW, there's a "Thanks" button for a reason

berndblb said:
:GOOD: Glad you got it working! BTW, there's a "Thanks" button for a reason
Click to expand...
Click to collapse
I know there is supposed to be one - I've read about it - but I can't find it anywhere!!!!
Found it!!!

About Root in 05Q

Hello guys!!!, Today I get the new OTA with the firmware 05Q and I install it. I see in the forum a version of 05Q rooted LINK HERE
I only want to ask if anyone know another way of get root actually or if I should wait until our amazing toolkits for 1+1 get updated.
Thanks i nadvance!!! :cyclops:

You can gain root following, This thread. If you already have a custom recovery install, might be easier to install the pre-rooted 05QA. I went the second route.
P.S. That toolkit will root 05QA, just does not have the new firmware to go back to stock.

I have a custom recovery installed ofc, if I install the pre-rooted 05Q I lost all my data and apps? Should I do a factory reset? Thanks for your fast answer mate!!

Istvan_86 said:
I have a custom recovery installed ofc, if I install the pre-rooted 05Q I lost all my data and apps? Should I do a factory reset? Thanks for your fast answer mate!!
Click to expand...
Click to collapse
If you have custom recovery installed. Do a back up first. You should not have to wipe or lose anything.

rraquib said:
If you have custom recovery installed. Do a back up first. You should not have to wipe or lose anything.
Click to expand...
Click to collapse
Really thanks again mate!! I do it, like you, as soon as possible.

Wait guys, all you need to do is flash SuperSU from your custom recovery. That's it, nothing more.
@rraquib, why on earth would you tell him to flash the entire ROM again??

timmaaa said:
Wait guys, all you need to do is flash SuperSU from your custom recovery. That's it, nothing more.
@rraquib, why on earth would you tell him to flash the entire ROM again??
Click to expand...
Click to collapse
@timmaaa Read carefully I mentioned both option and he was wondering about the pre-rooted version.

rraquib said:
@timmaaa Read carefully I mentioned both option and he was wondering about the pre-rooted version.
Click to expand...
Click to collapse
You said that flashing entire ROM would be easier, it isn't. All that's need to get root is to flash the SuperSU zip. He's already on 05Q so flashing the ROM zip is completely and utterly pointless. It's like telling someone who's run out of petrol to install a entirely new petrol tank that's full of petrol (when all that's actually needed is the fuel).
It doesn't matter what someone thinks might be the solution, if you're going to answer in the q&a section you need to give the best and easiest solution.

The thing is flashing update-supersu is not working... for me at least. I updated OTA.. After installation finished, rebooted to TWRP and tried to install update-supersuv2.37.zip...
It doesn't show any error, but when I reboot my phone there is no supersu installed ( actually there is one but it's greyed out with android icon and not showing up on application list )

timmaaa said:
Wait guys, all you need to do is flash SuperSU from your custom recovery. That's it, nothing more.
@rraquib, why on earth would you tell him to flash the entire ROM again??
Click to expand...
Click to collapse
+1
only SU from TWRP

plato79 said:
The thing is flashing update-supersu is not working... for me at least. I updated OTA.. After installation finished, rebooted to TWRP and tried to install update-supersuv2.37.zip...
It doesn't show any error, but when I reboot my phone there is no supersu installed ( actually there is one but it's greyed out with android icon and not showing up on application list )
Click to expand...
Click to collapse
Install a newer version
#stayparanoid

Sorry guys for don´t answer your comments, I have been working out of my country for a couple of weeks.
I get root on 05Q with just flashing SuperSU 2.46 from recovery. Easy and fast, just that.
Anyway you have my thanks in your respective buttons.
EDIT: If moe people with doubts read this. I use the info on this post. http://forum.xda-developers.com/showthread.php?t=2788632

So now what can I upgrade my Stock ROM to?

Hello, I'm a noob at this so please be kind. I followed the below:
http://forum.xda-developers.com/tra...inners-guide-unlock-custom-rom-tf300-t3061648
I successfully:
Unlocked my TF300T's Bootloader
Installed custom recovery using fastboot
Rooted my tablet
Debloated the Tablet (Titanium Backup)
Backup up my current (OEM) SYSTEM ROM to microSD
So now I'm onto attempting a custom ROM. I'm a bit bored with 4.2.1 and would like to go to the same version of ROM my Note 7 has which is 6.0.1 Marshmallow or even try the new 7.0 Nougat.
I'm a little confused as to what ROM will or will not work. I see a few ROMS worth trying, but there install instructions reference a different Bootloader multiple flashes such as SuperSU or gapps.
Whats the best fool proof method to flash a new ROM with what I have and are there any simple one file ROM/ZIP/ Blob etc.. file that would do what I want?
Thank you.

broderp said:
Hello, I'm a noob at this so please be kind. I followed the below:
http://forum.xda-developers.com/tra...inners-guide-unlock-custom-rom-tf300-t3061648
I successfully:
Unlocked my TF300T's Bootloader
Installed custom recovery using fastboot
Rooted my tablet
Debloated the Tablet (Titanium Backup)
Backup up my current (OEM) SYSTEM ROM to microSD
So now I'm onto attempting a custom ROM. I'm a bit bored with 4.2.1 and would like to go to the same version of ROM my Note 7 has which is 6.0.1 Marshmallow or even try the new 7.0 Nougat.
I'm a little confused as to what ROM will or will not work. I see a few ROMS worth trying, but there install instructions reference a different Bootloader multiple flashes such as SuperSU or gapps.
Whats the best fool proof method to flash a new ROM with what I have and are there any simple one file ROM/ZIP/ Blob etc.. file that would do what I want?
Thank you.
Click to expand...
Click to collapse
Congratulations! Everything you did looks fine. So you are ready to install a custom rom. I would like to suggest one of the best: http://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 (You may follow up the tread and report there!)
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!

ebonit said:
Congratulations! Everything you did looks fine. So you are ready to install a custom rom. I would like to suggest one of the best: http://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 (You may follow up the tread and report there!)
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
Click to expand...
Click to collapse
Thanks. As simple as the process was, as a noob (first time attempting this) I was really concerned about screwing this up and bricking my tablet.
The one you linked to was one of the ones I was considering and hence my question regarding what works with what I have already done. The noob mind (mine anyways) finds a dozen questions at every turn. In this case I would ask the following:
Q-Do I have to use Kang TWRP?
Q-How is it different than the TWRP I used on my Tablet?
Q-Will I need to constantly change TWRP versions depending on what ROM I want to use?
Q-Is there a danger to switching TWRPs?
Q-Doesn't flashing SuperSU after I flash Gapps overright and erase SuperSU or is there some unique way to flash (push?) both at the same time?
Q-Many more I'm sure!
To the noob, almost all the instructions I read appear to be written for someone who as done this many times. The level of detail needed for the novice is just not there or lost between the jargon used, with many steps not fleshed out because the author assumes a certain level of expertise.
I will definitely read these threads as best I can, but in the interim, is there any ROM that are known to be able to be flashed via the TWRP I currently have? The author of the version I used certainly made it seem like it was that simple, load the ROM/ zip file onto the MicroSD card and when in Custom recovery simply use the INSTALL feature to navigate to the file and press a button to flash and ..."BAM!!" you are running a new ROM.

ebonit said:
...
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
Click to expand...
Click to collapse
That version of KANG appears to be dead, as the thread has been closed and abondoned by the OP. So no new questions or help there....
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)

broderp said:
That version of KANG appears to be dead, as the thread has been closed and abondoned by the OP. So no new questions or help there....
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
Click to expand...
Click to collapse
Please don't brick your tablet. First download Kang TWRP. It isn't dead. Try this https://www.androidfilehost.com/?fid=24052804347781183.

broderp said:
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
Click to expand...
Click to collapse
Yes you can.
However Kang TWRP is a xxx.img file. You also can use your current TWRP and flash the image file. Attached you will find an image and a zip version.

ebonit said:
Please don't brick your tablet. First download Kang TWRP. It isn't dead. Try this https://www.androidfilehost.com/?fid=24052804347781183.
Click to expand...
Click to collapse
Sorry, bad choice of words on my part. By dead I meant that the thread was closed and I'm concerned getting answers would be harder as the OP was no longer actively looking there for questions.
ebonit said:
Yes you can.
However Kang TWRP is a xxx.img file. You also can use your current TWRP and flash the image file. Attached you will find an image and a zip version.
Click to expand...
Click to collapse
Ok, so if I read your comment correctly, I can copy the .img file to an SD card, boot into recovery and flash it from there OR I can fire up fastboot and the same steps I originally did to install custom recovery from my PC to accomplish the same thing... either way I should still have custom recovery, but with the KANG version. Right?
THANKS TO BOTH OF YOU FOR RESPONDING TO MY PREVIOUS POST. I appreciate the support.

Oh no....
Well crap. I put the .img file on my SD card and boot the tablet into recovery, I flashed the .img file to the rovery not boot partition. All appeared well....but when I go back to see if I have KANG recovery, it hangs anbd says Booting Failure Unrecoverable bootloader error (0x000000000)
EDIT: After I cleaned my pants, I used abd and fastboot to flash the original Blob file using my PC. This restored the custom recovery. I was freaking out for a few minutes.
I didn't change the file name of the kang .img file. Should I have done something different?
EDIT: Successful recovery to Kang2.8.7.2 !! :good::good: I used adb and my PC to send the .img file (renamed "twrpkang.img" for simplicity) and it worked great. I'm a pro..:silly:

broderp said:
Well crap. I put the .img file on my SD card and boot the tablet into recovery, I flashed the .img file to the rovery not boot partition. All appeared well....but when I go back to see if I have KANG recovery, it hangs anbd says Booting Failure Unrecoverable bootloader error (0x000000000)
Click to expand...
Click to collapse
Bad luck! Could you please describe what does it mean? : "I flashed the .img file to the rovery not boot partition."

ebonit said:
Bad luck! Could you please describe what does it mean? : "I flashed the .img file to the rovery not boot partition."
Click to expand...
Click to collapse
Not sure what I did wrong. I tried to do it within the old recovery menu and it hosed it. It found the file and mounted it successfully, but it seemed weird to be within the partition I was overwriting and writing to it. Kind of like you cant install windows while your using Windows...
The new version is much smoother.... Thanks, not to learn about this gapps super SU and how to flash all of these and in what order along with the ROM..as well as this wipe vs format thing...so confusing...

[7.0/8.0][WW] ZE520KL FOTA Update Links

Moving forward, let's add OTA Update links here for users who cannot receive OTA notifications.
Flash via stock recovery. If your system has been modified, you may need to flash stock system image or the stock firmware.
IMPORTANT: Do not boot to system immediately!! Flash the no-verity file via TWRP first, then reboot:
No-verity file
[7.0] ZE520KL OTA (for WW SKU only)
WW_14.2015.1701.13
WW_14.2020.1703.28
WW_14.2020.1704.38
WW_14.2020.1706.53
WW_14.2020.1708.56
WW_14.2020.1709.68
WW_14.2020.1711.75
WW_14.2020.1711.80
WW_14.2020.1711.81
WW_14.2020.1712.85
[8.0] ZE520KL OTA (for WW SKU only)
WW_15.0410.1712.31 (Initial release. Expect some bugs. Must be on latest Nougat build.)
WW_15.0410.1801.40
WW_15.0410.1802.44
WW_15.0410.1803.53
WW_15.0410.1803.55
WW_15.0410.1804.61
WW_15.0410.1804.62
WW_15.0410.1806.65
WW_15.0410.1806.68
credits:
@gkillershots for the WW_14.2015.1701.13 link
@spica1234 for the WW_14.2020.1703.28 and .38 links
@Eng.Raman for the WW_14.2020.1706.53, .56, .68, .75, .80, .81 and WW_15.0410.1712.31, .40, .44, .53, .61, .65, -68 links
@vaidhy2007 for the WW_14.2020.1712.85 link
@AL_IRAQI for the WW_15.0410.1803.55 link
@pop4xda for the WW_15.0410.1804.62 link
(Still looking for anyone who wish to provide FOTA links for ZE552KL.)

How about link for ZE552KL (Z012D)?

cdanthien said:
How about link for ZE552KL (Z012D)?
Click to expand...
Click to collapse
I tried to get it too, but since my phone is the z017, it can only see ota's for itself.
but the ota only patches system, boot and radio, so if someone is couraged to port, it may be not that hard.
for z017 ota links, mention me everytime a new one appears and i'll give the link for it.
if someone unlocked a z012 with unofficial method, contact me so I help you get the link to post here and help the community.

gkillershots said:
I tried to get it too, but since my phone is the z017, it can only see ota's for itself.
but the ota only patches system, boot and radio, so if someone is couraged to port, it may be not that hard.
for z017 ota links, mention me everytime a new one appears and i'll give the link for it.
if someone unlocked a z012 with unofficial method, contact me so I help you get the link to post here and help the community.
Click to expand...
Click to collapse
Give me guide for Z012D, i will guide again to my friend. Thanks

cdanthien said:
Give me guide for Z012D, i will guide again to my friend. Thanks
Click to expand...
Click to collapse
hit the update button, It'll give you the update notification, then open the folder /data/data/com.asus.dm/files/
If you don't want to continue from here, just pass me the tree.xml
If you want, open it on an editor like notepad++
then look into the <value> that has a link inside.
example: <value>http://fota.asus.com/delta_package/phone/WW_Phone/formal/14.2015.1701.8-user-WW_Phone-14.2015.1701.13-user-WW_Phone-QWWSSS/WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user.zip.dd_20170317_151859.dd</value>
copy ONLY the link, put into the browser and It'll download you an dd file
ex: http://fota.asus.com/delta_package/...5.1701.13-fota-user.zip.dd_20170317_151859.dd
open this dd file on notepad ++
the <objectURI> is the link for the ota

gkillershots said:
hit the update button, It'll give you the update notification, then open the folder /data/data/com.asus.dm/files/
If you don't want to continue from here, just pass me the tree.xml
If you want, open it on an editor like notepad++
then look into the <value> that has a link inside.
example: <value>http://fota.asus.com/delta_package/phone/WW_Phone/formal/14.2015.1701.8-user-WW_Phone-14.2015.1701.13-user-WW_Phone-QWWSSS/WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user.zip.dd_20170317_151859.dd</value>
copy ONLY the link, put into the browser and It'll download you an dd file
ex: http://fota.asus.com/delta_package/...5.1701.13-fota-user.zip.dd_20170317_151859.dd
open this dd file on notepad ++
the <objectURI> is the link for the ota
Click to expand...
Click to collapse
I edited ZE520KL to ZE552KL, but i received "File not found"

cdanthien said:
I edited ZE520KL to ZE552KL, but i received "File not found"
Click to expand...
Click to collapse
I tought you would do it on a ze552kl
if it were that simple, I would've done it myself

any guide how to install this? using twrp or stock recovery?

updated Tizen V2.1 here : https://forum.xda-developers.com/zenfone-3/development/rom-tizen-rom-nougat-1701-8-ze552kl-t3573231

gkillershots said:
i tried to get it too, but since my phone is the z017, it can only see ota's for itself.
But the ota only patches system, boot and radio, so if someone is couraged to port, it may be not that hard.
For z017 ota links, mention me everytime a new one appears and i'll give the link for it.
If someone unlocked a z012 with unofficial method, contact me so i help you get the link to post here and help the community.
Click to expand...
Click to collapse
thank you so much!!

Z520KL : 14.2020.1703.28
14.2020.1703.28

Thanks for uploading the new update, we are appreciate it :good:

can I update? I am rooted, no changes made except flashing TWRP

mecoromeo said:
can I update? I am rooted, no changes made except flashing TWRP
Click to expand...
Click to collapse
Make a backup first, flash stock recovery, then flash the OTA updates. Remember to flash no verity file before first boot

animaanimus said:
Make a backup first, flash stock recovery, then flash the OTA updates. Remember to flash no verity file before first boot
Click to expand...
Click to collapse
Is the flashfire app effective? I tried it and updated to the latest ze520kl update. Everything went smoothly, but, I am not sure why but my wifi was disabled. I tried clearing cache and did not work. Not sure if the app did not work correctly or if it was an issue with the latest update. That said i downgraded using the same tool and got everything working again.
I think there is an issue with the new update. What do you guys think? Did any of you guys also had an issue with the new update?
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
spica1234 said:
Z520KL : 14.2020.1703.28
14.2020.1703.28
Click to expand...
Click to collapse
I had an issue with the update wherein my wifi was disabled and i couldn't figure out how to fix it. I rebooted, clearing cache, i even tried flashing it again and resetting everything. None worled.
I went back to the previous version and now my phone is working fine.
Did anyone else encounter this issue with this update? If so, please help me to avoid it from happening, i want to try this update

mecoromeo said:
Is the flashfire app effective? I tried it and updated to the latest ze520kl update. Everything went smoothly, but, I am not sure why but my wifi was disabled. I tried clearing cache and did not work. Not sure if the app did not work correctly or if it was an issue with the latest update. That said i downgraded using the same tool and got everything working again.
I think there is an issue with the new update. What do you guys think? Did any of you guys also had an issue with the new update?
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
I had an issue with the update wherein my wifi was disabled and i couldn't figure out how to fix it. I rebooted, clearing cache, i even tried flashing it again and resetting everything. None worled.
I went back to the previous version and now my phone is working fine.
Did anyone else encounter this issue with this update? If so, please help me to avoid it from happening, i want to try this update
Click to expand...
Click to collapse
This is what I do follow while applying Delta OTA.
No need to flash back stock boot/recoveries and no need as well to reinstall twrp back.
Steps using FlashFire, Flash as zip/ota option:
1. Load 'UL-ASUS_Z017D_1-WW-14.2015.1701.8-user'
2. Load 'WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user'
3. Load 'WW_ZE520KL-14.2015.1701.13-14.2020.1703.28-fota-user'
4. Remove tickmark from 'Inject SuperSU'
5. Add SuperSU zip, Which I've modded according to asus ramdisk of ours. Which is attached in here under my post.
Flash!
Note: FlashFire will take a minute or two to load flash, have patience.
* Reason I've to edit standard SuperSU package was for 'init.asus.rc' file in our ramdisk, which unset PATH during 'on init' event. So i added those params back in supersu's zip to append '/su/bin' in PATH

spica1234 said:
This is what I do follow while applying Delta OTA.
No need to flash back stock boot/recoveries and no need as well to reinstall twrp back.
Steps using FlashFire, Flash as zip/ota option:
1. Load 'UL-ASUS_Z017D_1-WW-14.2015.1701.8-user'
2. Load 'WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user'
3. Load 'WW_ZE520KL-14.2015.1701.13-14.2020.1703.28-fota-user'
4. Remove tickmark from 'Inject SuperSU'
5. Add SuperSU zip, Which I've modded according to asus ramdisk of ours. Which is attached in here under my post.
Flash!
Note: FlashFire will take a minute or two to load flash, have patience.
* Reason I've to edit standard SuperSU package was for 'init.asus.rc' file in our ramdisk, which unset PATH during 'on init' event. So i added those params back in supersu's zip to append '/su/bin' in PATH
Click to expand...
Click to collapse
Thanks. Haven't tried it yet, but i will though.
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"

mecoromeo said:
Thanks. Haven't tried it yet, but i will though.
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"
Click to expand...
Click to collapse
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"

mecoromeo said:
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"
Click to expand...
Click to collapse
I'm facing the same issue after OTA update!
My fone is rooted too!

mecoromeo said:
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"
Click to expand...
Click to collapse
Hello,
Sorry for that I got it now why it's happened.
Follow an extra step.
Extract ".28" firmware replace META-INF folder with attached below.
Zip the '.28' firmware back and rename it as 28_dummy.zip
Now follow above flashfire load 1-4 steps and as a 5th step add '28_dummy.zip' and as a 6th step as above supersu step and it'd definately work.