Help, i think i destroyed my phone......... - HTC One S

Hello. I have a htc one s ville c2(s3 proc) and a long time ago i installed a custom rom (trickdroid 5.0.0 ) and it started to work hard, wi-fi not working, and things like this.So i decided to go back to stock. My phone's cid is htc_032 wich means that is for Eastern europe. I downloaded a ruu 2.15......... and i installed it. The mobile network was working very hard (100kb/s) so i think the baseband is not good.Then i found an ota for htc_032 and i tried to install it. i relocked the hboot, then flashed the firmware.zip with fastboot. All fine, but after the install i candt even open my phone or enter in hboot........ please help...

Related

Problem with DeBranded Sensation & 2.3.4 update...Error Status 7

Guys,
I have found a definite issue regarding trying to debrand and flash the 2.3.4 OTA update to my Bell debranded sensation...Here are my steps and results...
1. Performed Revolutionary on shipping Bell Canada Sensation
2. Changed CID to 11111111 via fastboot.
3. Flashed generic UK 1.35.401.1 software via RUU file.
4. Downloaded 2.3.4 OTA update.
5. Try to install the OTA update.zip from recovery, it errors out with Status 7 error. No matter what CID I use, I always get this error status 7.
6. Change CID to HTC__E11 to try and get the OTA update automatically, Downloads and then gives me a "variant system software" error when it goes to install. I've never heard of or seen this error before.
7. Run Revolutionary again and then flash the update.zip. It appears to successfully flash, but when the phone reboots, all I get is a black screen. the phone makes noises and appears to be functioning somewhat, but screen is black.
8. I am now thinking, great, I just bricked my phone...
9. Reboot into hboot. It still shows Bootloader of 1.17.0011, which is strange because the OTA is supposed to update it to 1.18.0000.
10. I then change the CID to 11111111 and reflash with the 1.35.401.1 RUU and thank god the phone is back to working condition.
It appears that there is either a hardware difference or something really low level that is being changed with this new update and it might not work properly with the different radio from the Bell Canada version with the 850/1900 radio, but I don't understand why flashing to the 1.35.401.1 RUU works fine. If anyone else can shed any light on this or give me any hints, I would appreciate. I thought my experiences might help the devs out there further understand the new OTA and the Sensation software/hardware. My end goal is to have the most up to date stock unbranded software installed on my Sensation. I am using with AT&T if anyone is wondering.
Y2J
y2jdmbfan said:
Guys,
I have found a definite issue regarding trying to debrand and flash the 2.3.4 OTA update to my Bell debranded sensation...Here are my steps and results...
1. Performed Revolutionary on shipping Bell Canada Sensation
2. Changed CID to 11111111 via fastboot.
3. Flashed generic UK 1.35.401.1 software via RUU file.
4. Downloaded 2.3.4 OTA update.
5. Try to install the OTA update.zip from recovery, it errors out with Status 7 error. No matter what CID I use, I always get this error status 7.
6. Change CID to HTC__E11 to try and get the OTA update automatically, Downloads and then gives me a "variant system software" error when it goes to install. I've never heard of or seen this error before.
7. Run Revolutionary again and then flash the update.zip. It appears to successfully flash, but when the phone reboots, all I get is a black screen. the phone makes noises and appears to be functioning somewhat, but screen is black.
8. I am now thinking, great, I just bricked my phone...
9. Reboot into hboot. It still shows Bootloader of 1.17.0011, which is strange because the OTA is supposed to update it to 1.18.0000.
10. I then change the CID to 11111111 and reflash with the 1.35.401.1 RUU and thank god the phone is back to working condition.
It appears that there is either a hardware difference or something really low level that is being changed with this new update and it might not work properly with the different radio from the Bell Canada version with the 850/1900 radio, but I don't understand why flashing to the 1.35.401.1 RUU works fine. If anyone else can shed any light on this or give me any hints, I would appreciate. I thought my experiences might help the devs out there further understand the new OTA and the Sensation software/hardware. My end goal is to have the most up to date stock unbranded software installed on my Sensation. I am using with AT&T if anyone is wondering.
Y2J
Click to expand...
Click to collapse
I would venture to guess you're not aware that you should probably not (at least not now), do an official FOTA/OTA on an unauthorized S-OFF Sensation.
The official HTC 2.3.4 OTA that came out a few days ago, LOCKS your device. It puts it back into an S-ON state.
Unless something has changed, if you have S-OFF via Revolutionary....stay far away from official HTC updates.
Something has changed...revolutionary now supports the new "locked" bootloader!
Hoggles said:
I would venture to guess you're not aware that you should probably not (at least not now), do an official FOTA/OTA on an unauthorized S-OFF Sensation.
The official HTC 2.3.4 OTA that came out a few days ago, LOCKS your device. It puts it back into an S-ON state.
Unless something has changed, if you have S-OFF via Revolutionary....stay far away from official HTC updates.
Click to expand...
Click to collapse
I'm well aware that the the official HTC 2.3.4 OTA locks the device. As long as I have a debranded Sensation running the latest and greatest firmware/software, that is all I am looking for. And now that Revolutionary works on the new HBOOT there shouldn't be much trouble getting back to the original shipping software. I still am curious as to what is causing this "Error Status 7" error code.
So how can I update my sensation with s-off?
A bug in me from being updated.
That would really interest me too! don't want to be S-ON again to make this update. Another question (maybe off topic): how can i update to new S-OFF version 04pre4? I'm now on 03pre7.
Hi
I have the exact same problem as yours, what can we do to update it?
Same on Swisscom-branded phone
I tried the OTA on my swisscom phone, it reboots and I get an exclamation mark with a blue droid. Waited 10 minutes just in case, but no change.
Removed battery and rebooted. Phone still ok, but not updated obviously.
I'm not sure it will remove S-OFF, but I don't care, HTC provides an official procedure for that and we have what we need.
But I need this update to work on my rooted, S-OFF stock sensation. Will try again anyway...
EDIT: I tried going into recovery and manually flashing the OTAxx.zip file, but it gave me an assert_failed: check_cid!? Though I never changed the phone CID! So why propose me an update on my phone if it's the wrong one??? Not sure I want to change the CID of my phone now.

flashing ICS back to stock

Hey guys,
I have to flash my HTC Sensation back to stock, because it have a little hardware error (its sometimes suddenly shutting down ...)
My Sensation is from Germany..
On my phone is currently the Cyanogenmod 9. Yesterday I flashed the eng Hboot 1.17, because I read somewhere that i have to. Is this true?
After this I wanted to restore my backup of the original Rom, but this doesn't work. There were some errors and so on.
I think if I would send it back to HTC I have to uninstall the CWM and I have to install the old Hboot 1.18, but after a lot of reading today and yesterday I'm very confused., because I found no working way ...
greets
Tobi
http://forum.xda-developers.com/showthread.php?t=1516255
Person with pretty much same problem and some advice.
1. Flash old 1.17 FW (unless you're Super CID, in which case you may not need to)
-> ok i flashed a 1.17 FW. Everything is still working without any issue,but after I unlocked my phone i had the 1.17.111and so on FW. Now I have the 1.17.2008. Is this maybe a wrong fw?
2. Flash the RUU of your choice (normally the one your phone came with, if available)
->I don't know the RUU which my phone came with , the most was done by the program revolutionary. I have an unbranded European Sensation. Which is the right RUU?
RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe
RUU_Pyramid_HTC_Europe_1.28.401.1_Radio_10.42.9007.00P_10.11.9007.15_M_release_192608_signed.exe
RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed.exe
RUU_Pyramid_HTC_Europe_1.45.401.2_Radio_10.56.9035.00U_10.14.9035.01_M_release_208857_signed.exe
RUU_Pyramid_HTC_Europe_1.45.401.3_Radio_10.56.9035.00U_10.14.9035.01_M_release_219990_signed.exe
RUU_Pyramid_HTC_Europe_1.50.401.1_R_Radio_10.58.9035.00U_10.15.9035.02_2_release_228602_signed.exe
I read that I can brinck my phone very fast with it, so it is very important
I just have to download the exe and run it, after this it will flash my phone if it is in USB Debugging ?
I hope it is so easy to downgrade the phone from 4.0.3 to 2.3.4
3. Reset Super CID to one of your choice (again, usually the one your phone came with)
Is this important? Or is it enought if I just reinsert the battery, becuase I don't know if I'm Super CID
4. S-ON using the fastboot command in the guide in the Dev forum
with adb-tools:
-fastboot oem writesecureflag 3
-fastboot reboot-bootloader
right?
RUU_Pyramid_HTC_Europe_1.50.401.1_R_Radio_10.58.90 35.00U_10.15.9035.02_2_release_228602_signed.exe
This was on my unbranded Sensation when I bought it.
For SuperCID look here (Step 4):
http://forum.xda-developers.com/showthread.php?t=1192300&page=1
warning
i updated to icecreamsandwich firmware h boot 1.23. i neede to go back to stock so i follwed directions on guide to s-on and ran ruu that came with my phone and it says error get the right bootloader ruu .however it didnt brick it but bootloader says security warning wifi and wifi hotspot both gives error. ive tried everything i know to fix it with no luck. ive heard its because i upgraded the firmware.
ok I'm now on Super cid. This was just very easy
Ok now I have to download the RUU (filefactory is very slow... )
What will happen, when I would flash the wrong EU ROM? Or is this just impossible?
Is it important to reset the cid to the cid which was set, when I got the phone? Or is it set back by flashing the RUU?
I have a lot of questions, but I don't wanna brick my lovely phone
Edit:
Ok everything is now fine. My phone is now on Andorid 2.3.4, S-On, old CID and unrootet...
I hope they will repair it, because sometimes the phone run 2 days without any issue and sometimes it just runs some hours without issue...

[Q] RUU upgrade?

I have a desire s, s-on, hboot 2.00.0002, radio 3822.10.08.04_M. It was bought in UK.
I currently have the Vanilla ICE v2.0 rom installed, however there are some features that are really annoying me, and I would like to try the official HTC ics update.
I have been to htcdev and downloaded the ICS RUU (after selecting WWE as the region).
However, when I run it it bombs out, with error 155, and suggests I download the correct version.
From what I can see on here, I've been told that the WWE version should be correct version for UK, is this correct?
I did try downloading Endymion 3.5, and installing that onto my phone, however when I boot my phone, it keeps saying that the phone, messaging and pretty much everything has crashed! I tried running the RUU with that installed, and it got as far as trying to send the rom over, however it failed. Unfortunately, I cannot remember the exact error. It *may* have either been 155 or 175.
I have since read this thread -> http://forum.xda-developers.com/showthread.php?t=1655832 about re-locking the bootloader, however I have not yet managed to restore my phone to stock.
I am currently downloading a rom from here -> http://forum.xda-developers.com/showthread.php?p=31345345&highlight=link#post31345345 in the hopes it will work.
Does anyone know if you HAVE to have either a stock rom, or an older rom, in order to run the ruu?
I tried re-locking the bootloader, and running the
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
file I downloaded, however it got as far as updating the signature, and failed saying I need to get the right version.
Can someone PLEASE help.
How can I downgrade my phone to stock gingerbread, and why is the WWE ruu not working on my o2 (uk) branded phone?
check this out: http://forum.xda-developers.com/showthread.php?t=1318919&highlight=skanob

[REF] Dead/Bricked phone after JB OTA, QHSUSB_DLOAD

Hi All,
There are more and more reports coming in from people who ended up with a dead/bricked phone after the JellyBean Update 4.1.1 , 3.16.401.8 OTA. As you connect it to your PC you will soon find out it's in QHSUSB_DLOAD mode.
The purpose of this threat is to see how many people are affected, what people have done to attempt to recover their phone, and to find a possible solution (this chance seems rather small though).
There are alot of post about this in the JellyBean Speculation/News/Discussion threat, starting from page 157.
There are 2 threats about it in Q&A:
One S in QHSUSB_DLOAD mode
My HTC to really died
Reported attempts to recover:
QHSUSB_DLOAD Fix by team Unlimited
Unbricking HTC devices with the QHSUSB_DLOAD issue tutorial by kgs1992
Step 3 (and some others) from [TUT] Downgrade/Unbrick Ville S4
Another HTC one V recover guide where i can't find the link for.
Please report here if you have this issue. Please mention your CID, in what country you downloaded the OTA, the software version you upgrade from and the hboot version.
Also any new ideas to recover our phones our self are welcome!
My phone:
2.31 Unbranded Europe
1.14 Hboot
Downloaded in The Netherlands
1111111 Supercid
I have exactly the same problem, waiting...
As far as I know the issue is only caused by people who previously had SuperCID.
Sent from my HTC One S using Tapatalk 2
usaff22 said:
As far as I know the issue is only caused by people who previously had SuperCID.
Click to expand...
Click to collapse
I thought I saw a report of a fully stock device and one htc__001 cid as well. I can't find them at the moment, but this is also why I started this threat. But there seem to be more of these reports of supercid indeed, though there are also allot with supercid who successfully updated.
My phone is bricked too
Orginal CID was HTC_0001 (maybe), branded by 1&1 Germany
but changed to 11111111 to flash a unbranded RUU (what had worked)
I had Stock Recovery and relocked bootloader
My phone is bricked too
SuperCID 11111111 Hboot 1.14 Recovery Stock y Relocked bootloader.
My phone is bricked too
Orginal CID was HTC_203 (maybe), not branded by telecom company - France
but changed to 11111111
I had Stock Recovery and relocked bootloader and flash the 2.31 RUU
hellgod said:
My phone is bricked too
Orginal CID was HTC_203 (maybe), not branded by telecom company - France
but changed to 11111111
I had Stock Recovery and relocked bootloader and flash the 2.31 RUU
Click to expand...
Click to collapse
Dam it didnt mean to hit thank so enjoy that lol.
@Vauix, did you run a RUU before updating? if so what one?
let's discuss who and what options tried to output the list of sections? How you think why it happened?
All of them seem to be caused by SuperCID. But the updater script allows flashing for SuperCID, so I wonder why they get bricked.
Sent from my HTC One S using Tapatalk 2
I agree with you. But what it is necessary to undertake that Ubuntu saw sections?
Same here.
SuperCID and ota
Now nobody can call me
Same here.
SuperCID too
Darknites said:
Dam it didnt mean to hit thank so enjoy that lol.
@Vauix, did you run a RUU before updating? if so what one?
Click to expand...
Click to collapse
Yes I ran a RUU prior to flashing this update, i didn't chance anything to the rom yet but to search for the OTA. it was the RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
I thought about my supercid before I ran the RUU but i thought the worst thing that could happen was i could get a error that it couldn't flash it.
Its rather weird that some guys with supercid managed to flash it successfully. And i still think I saw some people with other cid's with bricked devices.
SuperCID too, previously Vodafone germany, unbranded an relocked ...
I ran the OTA update twice on my supercid'd device successfully.
In opposite to what I could read here, my bootloader was unlocked before and still after the update.
The first time I ran the update I forgot to reflash stock recovery. The phone started updating and rebooted, but no changes had happened. After restoring stock recovery and downloading the update again, I successfully updated.
As I couldn't get root I restored Venom and downgraded my new hboot from 2.15 to 1.06.
Today I started a second try successfully without a glitch.
Basically I keep an untouched nandroid backup of every new rom installation on my local harddisk. This means in case of custom roms I do a nandroid before the first boot.
As this is not possible on stock recovery I change back to custom recovery after the first boot, doing my backup then. I'm just checking the needed boxes otherwise I only proceed during the setup - the complete customization is done afterwards.
In this case I restored a backup called 2012-08-23--08-18-16_htc_stock_2.31
Stock here means: No apps, no customizations, no nothing, simply: stock and supercid.
After that was done I restored apps with Titanium.
That's how it worked (pretty simple) Maybe this will help you find some reasons for what has happened to your devices.
Same problem here...
SuperCID
All people here seem to have SuperCID, I have not.
I got my ville for about 7 months now and never had SuperCID.
I did it like everytime:
-Wiped everything ( Data / Cache / System )
-Flashed Stock Recovery
-Relocked
-Flashed 2.31 Europe RUU in Bootloader ( yes, that works but I guess noone knows )
-Downloaded 4.1.1 Update and let the Device do its magic
Now my phone is bricked.
Strange enough, a good friend of mine whos barely able to use its phone, got the same issue.
Im 100% sure he doesnt have any modifications done to his device.
Already tried the Ubricking-Tutorial but the Partitions just dont show up :-/
I did the super CID, too. No my phone is dead. Won't even charge.
I tried to do Enumerating the partitions but could only find up to 3. No 4 or 12.
Please help :crying:
SuperCID, German ONE S unbranded. Dead.
Unbrick/Downgrade instruction did not work here.

[Q] Problems going back to stock after Venom Rom installed

Hi Everyone,
knowing it's all out there, just need to read (a lot), please help me finding the correct way to solve my problem. I can not change to other ROM, mostly due to lack of knowledge. Please before you judge and claim I should read and learn, i have kids who don't allow me read things properly, and there are tons of information out there, seems simplier to ask for directions this time, based on the situation of the phone.
This is the first custom rom I tried on my new S4 HTC One S (not brand new, just new to me). It was stock rom, locked. Followed instructions on different threads, I unlocked the phone, flashed TWRP recovery, installed SuperSU, copied Venom Rom zip to SD card and installed from recovery, with the aroma. Success. Before installation I did a backup in TWRP.
I very much like the rom (though have 2 issues: 1. phone reboots randomly without any notification. 2 phone loses carrier randomly, so I see no GSM connection as if SIM was removed. This happens when phone is untouched so no way SIM is loosy or something). When I try to chose carrier manually from settings, it sais no SIM card is installed...
But I would like to try other roms as well, and also wish to compare some stock roms. So I downloaded a generic HTC Europe stock RUU, hoping I can easily flash it. Relocked the phone, ran the RUU.exe with Fastboot USB mode in bootloader, but it all came up with error messages and left me at the HTC logo. All I can do is to re-install Venom 3.0.0 from recovery, that works, otherwise I end up in boot loop.
Also I can not go back to the original state using the backup from TWRP. It installs boots but it basicaly freezes before the phone setup comes. I can see the background image, the clock and the GSM antenna sign, but thats all, nothing else happens, no matter how hard I try to reboot.
Phone current boot screen shows: Tampered + Unlocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
Radio-1.15.50.05.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10
When I re-locked the phone it said Tampered + Relocked + Security Warning
As recovery I have TWRP 2.6.0.0 flashed. I did nothing else.
Could someone help me with instructions or at least directions how I could go back to a nice stock RUU? With the one I downloaded i had different error codes 213 (wrong ID) and 255 Unkown error.
I believe as the phone is not S-OFF and/or Super CID, it is relevant which RUU I download. The phone used to boot with a voda logo, so I believe it was one of the UK or AT voda stock roms, but neither works.
Your opinion/feedback is highly appreciated.
Cheers,
skee
skee81 said:
Hi Everyone,
knowing it's all out there, just need to read (a lot), please help me finding the correct way to solve my problem. I can not change to other ROM, mostly due to lack of knowledge. Please before you judge and claim I should read and learn, i have kids who don't allow me read things properly, and there are tons of information out there, seems simplier to ask for directions this time, based on the situation of the phone.
This is the first custom rom I tried on my new S4 HTC One S (not brand new, just new to me). It was stock rom, locked. Followed instructions on different threads, I unlocked the phone, flashed TWRP recovery, installed SuperSU, copied Venom Rom zip to SD card and installed from recovery, with the aroma. Success. Before installation I did a backup in TWRP.
I very much like the rom (though have 2 issues: 1. phone reboots randomly without any notification. 2 phone loses carrier randomly, so I see no GSM connection as if SIM was removed. This happens when phone is untouched so no way SIM is loosy or something). When I try to chose carrier manually from settings, it sais no SIM card is installed...
But I would like to try other roms as well, and also wish to compare some stock roms. So I downloaded a generic HTC Europe stock RUU, hoping I can easily flash it. Relocked the phone, ran the RUU.exe with Fastboot USB mode in bootloader, but it all came up with error messages and left me at the HTC logo. All I can do is to re-install Venom 3.0.0 from recovery, that works, otherwise I end up in boot loop.
Also I can not go back to the original state using the backup from TWRP. It installs boots but it basicaly freezes before the phone setup comes. I can see the background image, the clock and the GSM antenna sign, but thats all, nothing else happens, no matter how hard I try to reboot.
Phone current boot screen shows: Tampered + Unlocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
Radio-1.15.50.05.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10
When I re-locked the phone it said Tampered + Relocked + Security Warning
As recovery I have TWRP 2.6.0.0 flashed. I did nothing else.
Could someone help me with instructions or at least directions how I could go back to a nice stock RUU? With the one I downloaded i had different error codes 213 (wrong ID) and 255 Unkown error.
I believe as the phone is not S-OFF and/or Super CID, it is relevant which RUU I download. The phone used to boot with a voda logo, so I believe it was one of the UK or AT voda stock roms, but neither works.
Your opinion/feedback is highly appreciated.
Cheers,
skee
Click to expand...
Click to collapse
To go back to stock u have to flash the right RUU, depends on which CID ur phone got.
u can download it here: http://www.androidruu.com/?developer=Ville
If u downloaded the right RUU, boot ur HOS into fastboot relock the phone and start the RUU.
Let it finish and u r on stock
Hi Homeboy, thanks for the answer. Seems clear. I have only 1 question. How can I make sure which is the right RUU?
I believe I should do a getvar all command, to see the CID id? Then what shall I look at the RUU's filename?
And after the phone having been relocked, shall it be in fatboot USB in bootloader or shall the phone be up and running when I start the RUU.exe from the computer?
thanks
skee81 said:
Hi Homeboy, thanks for the answer. Seems clear. I have only 1 question. How can I make sure which is the right RUU?
I believe I should do a getvar all command, to see the CID id? Then what shall I look at the RUU's filename?
And after the phone having been relocked, shall it be in fatboot USB in bootloader or shall the phone be up and running when I start the RUU.exe from the computer?
thanks
Click to expand...
Click to collapse
hi,
i saw u live in Hungary so it should be the Europe RUU try this:
http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
And yes phone should be in fastboot when u start the RUU.

Categories

Resources