Hello,
yesterday i was so happy about the tw ics update for the TF101G that i couldn't wait and updated it with the blob file flashed to mmcblk0p4.
After the first restart the Asus flash process worked and restartet the device again like everytime i flashed my transformer with this method.
But after the restart the screen stayed black and the background light too and nothing happend.
I tried to restartet the device several times after this but nothing happend, the only thing that works now is APX mode that i can see in my device manager but since i have a tf101g that has sbk3 it wont help me.
So it seems my device is bricked forever. Recocery wont work, normal Boot wont work, not even the screen shows whats up but stays black.
I hope someone can help me because its hard to see an so expensive paperweight in front of me.
And i hope my english isnt that bad to understand.
have you tried plugging it into the mains and rebooting?
Have loaded the battery over night but it didnt helped.
Looks like my expensive Paperweight will stay one.
Loaded the Battery since then and tried to reboot and blind recovery in case only the display driver or something wont work but the display stays dark black.
Hi,
I've kinda weird problem with my skyrocket.
When phone boots, just split second of boot screen appears and then total black until boot complete and i have to press unlock button twice to wake device. And after that while using, whenever i start browser or camera app, it goes to black again.
then i decided to flash phone again to ATT original 4.1.2 firmware wia ODIN and found another problem,
In download mode, screen remains totally black, phone detects by Odin but nothing on screen.
then I've tried flashing 2.3.6, ICS and JB original and CM firmwares but no success.
if anybody aware about this issue, please help.
thanks. :good:
I just bought the S6 The day before yesterday. It was working fine until I received the official Firmware update from Samsung by going Settings> About device> Software updates. Downloaded the update then the phone needs to restart to complete the update. It doesn't complete it. It just gets stuck at whatever percentage it desires and then reboots and goes into the updating screen again. I tried going into recovery mode and it just doesn't work. as I can't turn the phone off. I tried making it discharge completely then recharge it and then boot it into recovery mode but it still doesn't work. The only thing that works is ODIN mode. So what should/Can I do about that?
TLDR;
Trying to install custom recovery with odin auto-reboot checked off so stock doesnt replace odin says PASS I disconnect the phone but in downloading mode the blue bar is full and the phone doesn't want to shut down. I remove the battery and try to boot into custom philz-recovery it gets stuck in samsung logo. But functions perfectly on normal boot. I reset the whole phone and try the cf-auto-root method and the phone gets stuck in samsung logo now not even booting up normally. So i reset the whole phone again with odin and firmware from sammobile now sitting with a stock android and knox warranty ticked without having a root.
(Sorry for the long post I've tried to provide as much info as I can) So I have a Samsung Galaxy S5 exact model number SM-G900H. And I'm trying to root it. I go into download mode than I launch Odin and check off Auto-Reboot so it won't boot up and the stock recovery replaces the custom I'm trying to install, I connect the phone it says its connected than I select AP and than choose philz-recovery (latest version) and start it. So the Odin finishes its work says "PASS" in green letters. I disconnect the phone but on S5 the blue bar is full and it does not want to shut down (if the auto-reboot is checked it just reboots and it doesn't even want to boot into stock recovery just stuck on samsung logo) I've waited a good hour and still nothing. So I pull out the battery for it to shut down and than I straight try to boot into recovery and it just gets stuck on samsung logo and the blue letters don't even show up. Before rooting the recovery worked and I factory resetted the device before so samsungs knox does't interrupt with its not-being-able-to-boot-into-recovery-if-you-dont-know-the-password-to-the-samsung-account. And I'm now sitting here now with knox warranty ticked and not even rooted BUT I CAN STILL USE THE PHONE PERFECTLY WITHOUT TRYING TO BOOT INTO RECOVERY JUST BOOTS UP NORMALLY. So what I do than is reset the phones firmware with Odin from sammobile. Ok stock android. Than I try the Cf-auto root method with Odin. No luck phone just doesn't even boot up. So I reset the phone again same method. Ok stock android again. Sitting here reading through google for 8 hours 5 of thise spent on xda. STILL NO LUCK. So I hope someone can resolve the issue. I can't provide any pictures as I just rage closed my computer and didn't take pics. And if I install cynogenmod with heimdall is it going to be rooted (i know you don't need a root to do that) and can someone provide a guide to that heimdall cynogenmod install method?
I had my phone just sitting on a wireless charger this morning and had been there for about 15-30 minutes. I noticed it was rebooting, odd I thought? I took it off and then realized it was going into a boot loop. I gave it a soft reset and then it would turn on and stay on for about 10 seconds before boot looping again. I again gave it a soft reset after a couple loops and now it seems to totally dead, as the title implies.
No button combination has worked and I've held them all down for well over 30 seconds each. I've tried plugging it into my PC and haven't gotten any response that way. The blue LED is on so I know it's not dead...I think? To make matters worse, I bought this phone off Craigslist about 5 months ago and it's the Exynos version so I definitely can't get any kind of warranty on it. I'm hoping someone has had this problem and can help or just has some advice. Thanks everyone.
EDIT: To keep this updated, I have been able to get into Odin Mode and have tried to flash stock firmware. Odin says everything went fine but the phone hangs up at the Samsung Galaxy S7 logo. I'm unable to boot into recovery mode and I've even tried to reinstall TWRP with Odin and that has not worked.
Seen the LED only problem before, waiting for the battery to drain and the phone to turn off seems to be the only known cure atm
Once it does, connect the charger for 15 mins, then boot directly into recovery and clear caches to try fix the bootloop, possible it may need factory resetting / clean flash of stock ROM
Using the MicroUSB > USB white adapter, you may be able to connect a power hungry USB peripheral to the phone to drain the battery faster, I use a USB desktop fan, but some people report it not working when it is stuck in this LED loop and have just had to wait it out
Thanks for that advice, I'll let it drain over night. However, I have been able to get it to boot into Odin Mode and Odin v.3 recognized it. I flashed the stock firmware but upon rebooting nothing happened and now it gets stuck at the Samsung logo screen. I can still get it back into Odin mode, which I believe will be the fastest way to kill the battery, but I find it odd that I can get into that but not recovery? I am rooted and have TWRP installed, if that matters at all.
If you can get into Download (ODIN) mode, then letting the battery drain probably won't help, that only seems to help when the phone is completely stuck with nothing but the LED working
Make sure you flash CSC (Not HOME_CSC) along with the other 3 sections of the ROM, using ODIN 3.12.3, that should factory reset the phone after the flash
If you successfully flashed stock with ODIN already, you are no longer rooted and do not have TWRP installed, flashing stock with ODIN replaces all that with stock
I updated Odin and once again tried to flash the 4 parts, making sure I used the right CSC file, but I'm still getting hung up at the Samsung Galaxy S7 logo. Do you have a suggestion as to which region's firmware I should use? I have been trying the Australia one from SamMobile's site.
EDIT: And to clarify, I have the G930FD(the duos one).
jonny727272 said:
I updated Odin and once again tried to flash the 4 parts, making sure I used the right CSC file, but I'm still getting hung up at the Samsung Galaxy S7 logo. Do you have a suggestion as to which region's firmware I should use? I have been trying the Australia one from SamMobile's site.
EDIT: And to clarify, I have the G930FD(the duos one).
Click to expand...
Click to collapse
Any region would work, and the F firmware works for the FD too