THERE ARE TWO METHODS TO DOWNGRADE CANVAS 2 TO ICS.....
RECOMMENDED METHOD-- USING CWM RECOVERY: THE EASIER METHOD....
DOWNLOAD THIS RAR FILE AND EXTRACT IT.
you will find a folder with name as 2012-12-14.21.21.45
create a new folder in external sd and rename that folder-'clockworkmod'
make another folder inside that folder and rename it to-'backup'
now inside this folder paste the above extracted file.
REBOOT INTO RECOVERY.
go to backup and restore.
now select restore and select that file whose name is 2012-12-14.21.21.45
go to advanced and wipe delvic cache.
select wipe data/factory reset and also wipe cache partition.
now reboot your phone..
USING SP FLASH TOOLS:A BIT TRICKY METHOD....
DOWNLOAD AND EXTRACT THIS RAR FILE TO ANY SPECIFIC FOLDER.
THEN DOWNLOAD SP FLASH TOOLS FROM HERE..
extract sp flash tools to any specific folder any run as administrator.
go to options and check usb mode
again go to usb mode and click download all-download speed-force to high speed
now click on scatter loading option
locate the folder where you have extracted this rar file,there you will find one text file.....select it
you will see a list of files(and all of them is selected)
(DO NOT DESELECT ANY FILE AS IN THE CASE OF PORTING CLOCKWORK RECOVERY)
ENSBLE USB DEBUGGING ON YOUR PHONE AND SWITCH IT OFF...
remove the battery to make sure that the phone is completely swicthed off
now click on FIRMWARE UPGRADE option
but if you are running on jellybean then try DOWNLOAD option
now connect your phone in battery removed state with pc via usb cable
you will see a green coloured bar indicating the process
when all is done you will see a message DOWNLOAD OK
now close the sp flash tools and switch on your phone.
When u switch on u will find that stock unrooted ics have been flashed on ur fone...
Hit thx if i helped.
i want 2 downgrade..
but my phon was not rooted so can i downgrade canvas 2 ???
Sent from my Micromax A110 using xda premium
Yes but using sp tools
If phone not rooted you can downgrade using sp tools . But remember to do factory reset after install from the stock recovery menu .
I will not recommend to downgrade using stock recovery as it can brick ur fone.
U can downgrade by using cwm recovery. Flash it via sp tools.
Or u can use sp flash tools to downgrade.
I will soon post it:HOW TO DOWNGRADE CANVAS 2 BY USUNG SP FLASH TOOLS.
Hit thx if i helped.
plz fast rpy that how can i downgrade ??
with step ..
Sent from my Micromax A110 using xda premium
Anas6538 said:
plz fast rpy that how can i downgrade ??
with step ..
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Hey d other way is much difficult and risky dan dis one.
Still if u want dan i will post it this evening....
Sent from my Micromax A110 using xda app-developers app
but i cant wait plz fast post karo
Sent from my Micromax A110 using xda premium
heyy plz post how can i downgrade plz rpy
Sent from my Micromax A110 using xda premium
Anas6538 said:
heyy plz post how can i downgrade plz rpy
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Check it out bro i have updated it in d main post....
Now it includes both d methods. best of luck but i still recommend u to use the cwm backup method.
Hit thx if i helped
where r u post ??
plz send me url ...
Sent from my Micromax A110 using xda premium
Anas6538 said:
where r u post ??
plz send me url ...
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
I yar page ko upar slide kr k dekh na.
I have edited my previous post...
Hope it may help you.
Sent from my Micromax A110 using xda app-developers app
I have send u a private msg regarding post link.check it out.
Sent from my Micromax A110 using xda app-developers app
2012 -12-15 01.50.32 ??
it is ics back up plz rpy dev ...
Sent from my Micromax A110 using xda premium
Yup this folder contains the ics backup.....you have to place it inside the 'backup' folder which you have to make inside the 'clockworkmod' folder.
Then cwm just restore this backup and all is done.
And regarding cwm recovery u can also port it without root.
I m sending a tutorial of it.
Hope it may help u:thumbup
Anas6538 said:
heyy plz post how can i downgrade plz rpy
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Hey follow these steps to port recovery on ur unrooted jb..
NOTE-IT WILL NOT ROOT UR FONE BUT ONLY FLASH CWM..
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: d-h.st/t5c
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
Hit thx if i helped.
heyu bro
ye drivers to xp k lie he
mere paas to windows 8 he
plz
Sent from my Micromax A110 using xda premium
I too own windows 8 but it has no issues..it works fine. Just follow all d steps strickly as it is to install proper drivers.
plz tell me ..
that u no my phon was not root..
so ....
kya me inbilt recovery se backup restor kar sakta hu ???
Sent from my Micromax A110 using xda premium
No u cant...for more details check out ur personal msg inbox...i have written in detail about this.
Hit thx if i helped
I got u guy....u possess an unrooted canvas 2 running on jb with stock recovery or built in recovery...
U should first port cwm on ur fone and then u can easily downgrade to ics
Related
My micromax a25 smarty hangs at the first boot screen logo after restarting it. Is there any way to restore it?? I have factory reset it but that doesn't worked.
Please help me...
hey dude email me at [email protected] i have its recovery files.... if u have a pc ull have to download odin flash tool first.... mail me first ill tell u da whole process
Go to service centre ...mine also had same problm..if u hav backed up rom then use it with rom manager...
Sent from my A25 using xda app-developers app
yesterday some user reported that after flashing with the official mmx jelly bean
their screen looks dull.so here is the vivid colour patch for the mmx official jelly bean update..
extract the zip file and flash through sp tool.:good::good:
Hit like button if i helped.:angel:
How to install?
I am trying to flash via SP tool but dunno how.. please elaborate buddy!
This patch makes the blue color glow like ultraviolet. Other colors are more saturated enough than stock. To the developer- You made a great color patch.. That means you can make different kinds of color patches I hope.
Sent from my Micromax A110 using xda app-developers app
Dev...can u provide a cwm zip for the vivid file.....this will be thankful...
please elaborate!
bro please post the complete method of installing the file using sp flash tool.
any other way than sp tool?
ish639 said:
bro please post the complete method of installing the file using sp flash tool.
Click to expand...
Click to collapse
All thanks to @Dark4Droid... You can find the thread here
http://forum.xda-developers.com/showthread.php?t=2167244
1)Install Drivers. (if u already have then ignore)
2)Open SP tool
3)Select the patch that u donwloaded (extract it first)
4)Now Shut_Down Canvas 2.
5)Click Firmware_Upgrade Button.
6)Connect Phone{Switched off} to PC via USB Cable.
7)If everythings right,Flashing will proceed..
8)Wait till It finishes..A green ring is displayed on completion..
9)Now Close SP tool..Remove Phone from PC..
10)Switch ON the phone...It is successfully Flashed...
android_freak_ said:
All thanks to @Dark4Droid... You can find the thread here
http://forum.xda-developers.com/showthread.php?t=2167244
1)Install Drivers. (if u already have then ignore)
2)Open SP tool
3)Select the patch that u donwloaded (extract it first)
4)Now Shut_Down Canvas 2.
5)Click Firmware_Upgrade Button.
6)Connect Phone{Switched off} to PC via USB Cable.
7)If everythings right,Flashing will proceed..
8)Wait till It finishes..A green ring is displayed on completion..
9)Now Close SP tool..Remove Phone from PC..
10)Switch ON the phone...It is successfully Flashed...
Click to expand...
Click to collapse
Buddy not firmware upgrade u need to click download button I suppose :thumbup:
Sent from my Micromax A110 using xda app-developers app
Teenome said:
I am trying to flash via SP tool but dunno how.. please elaborate buddy!
Click to expand...
Click to collapse
ish639 said:
bro please post the complete method of installing the file using sp flash tool.
Click to expand...
Click to collapse
All thanks to @Dark4Droid... You can find the thread here
http://forum.xda-developers.com/showthread.php?t=2167244
1)Install Drivers. (if u already have then ignore)
2)Open SP tool
3)Select the patch that u donwloaded (extract it first)
4)Now Shut_Down Canvas 2.
5)Click Firmware_Upgrade Button.
6)Connect Phone{Switched off} to PC via USB Cable.
7)If everythings right,Flashing will proceed..
8)Wait till It finishes..A green ring is displayed on completion..
9)Now Close SP tool..Remove Phone from PC..
10)Switch ON the phone...It is successfully Flashed...
Pls provide cwm flash file
Plsss some one provide cmw flash file.. i dnt have pc...dev pls
Provide cwm zip please...
Sent from my GT-I9300
Hi, please upload CWM Zip for a quick install.
Dj_cool said:
yesterday some user reported that after flashing with the official mmx jelly bean
their screen looks dull.so here is the vivid colour patch for the mmx official jelly bean update..
extract the zip file and flash through sp tool.:good::good:
Hit like button if i helped.:angel:
Click to expand...
Click to collapse
Are those 2 files from cynus t2 jb Rom?
Sent from my Galaxy Nexus
can any one upload screen shorts comparing one with patch and one without patch..??
Colour reproduction is very bad after patching
Sent from my Galaxy Nexus using xda premium
Great Work
nikhilmendu said:
Colour reproduction is very bad after patching
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Are you Blind actually .....This Patch has been used and confirmed many times before posting......This is based on the Vivid Display of Micromax V1 Stock ROM........Any way its having better colour than all Other ROM's of yours available till now :silly:
nikhilmendu said:
Colour reproduction is very bad after patching
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i think u have gone insane plz stop making bad or sud i say fake roms nd go back to ur mamma nd ask her for milk
nikhilmendu said:
Colour reproduction is very bad after patching
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
grow up kid..its xda.post ur fake rom/comments in ur blog.
dis patch is fully tested and working gr8.
Bro trust me really some colours are reproducing as different colours but
Remaining are vivid I like this patch it is great
Sent from my Galaxy Nexus using xda premium
It may b working false in your ROM
Sent from my Cynus T2 using xda app-developers app
If you have installed Custom ROM but want Micromax A110 stock boot logo/ boot Animation / Shutdown Animation back. Download the zip file and use CWM to install
Cooked, Tried & Tested by me
Hit thanks if you used it
http://ge.tt/31JLFKb/v/0?c?c
Thanks a lot :thumbup:
Sent from my GT-I9300
Dibbyo123 said:
Thanks a lot :thumbup:
Sent from my GT-I9300
Click to expand...
Click to collapse
welcome
Bro can I use it in Cynus T2 v17? and I want Micro ax A110 in my About phone option instead of Cynus T2...how can I do it...wat to edit in build.prop??
Sent from my Micromax A110 using Tapatalk 2
snowsunil said:
Bro can I use it in Cynus T2 v17? and I want Micro ax A110 in my About phone option instead of Cynus T2...how can I do it...wat to edit in build.prop??
Sent from my Micromax A110 using Tapatalk 2
Click to expand...
Click to collapse
Yes dear friend install root explorer go to system/build.prop before that don't forget to do w/o then give. Long click on the prop file and click open text editor then edit what nd all you want to do. That's it revolt and enjoy. Don't forget the thanks button.
Sent from my Micromax A110 using xda app-developers app
can somebody guide for exact steps?
what i m doing is goto cwm -> Install Zip from SDcard, select zip file
it gets aborted & I get error : Status 6
badshah.mb said:
can somebody guide for exact steps?
what i m doing is goto cwm -> Install Zip from SDcard, select zip file
it gets aborted & I get error : Status 6
Click to expand...
Click to collapse
Same here...its aborted during installation....pls check it...its not working...
Sent from my Samsung GT-S9081 using xda premium
badshah.mb said:
can somebody guide for exact steps?
what i m doing is goto cwm -> Install Zip from SDcard, select zip file
it gets aborted & I get error : Status 6
Click to expand...
Click to collapse
I was facing same error : Status 6 then after tunning status 7. Now after more fine tunning, it fixed, use this attached boot.img . working perfect.
hope this will resolve Logo issue !
warm regards,:good:
Nice Work
dealoflove said:
If you have installed Custom ROM but want Micromax A110 stock boot logo/ boot Animation / Shutdown Animation back. Download the zip file and use CWM to install
Cooked, Tried & Tested by me
Hit thanks if you used it
http://ge.tt/31JLFKb/v/0?c?c
Click to expand...
Click to collapse
Searched for it, for quite a long time and stumbled upon ur thread by luck. :good:
Good work
Just replace bootanimation.zip file
Yogesh992 said:
Same here...its aborted during installation....pls check it...its not working...
Sent from my Samsung GT-S9081 using xda premium
Click to expand...
Click to collapse
Extract bootanimation.zip file.
Replace this bootanimation.zip file in system/media using some root explorer
and set the permissions to rw r r
Thats it. :good: :cyclops:
Can u upload the canvas HD boot animation file.
is it That Logo That Show SUPERFONE CANVAS 2
yes
Gesendet von meinem Samsung GT-S9081 mit Tapatalk 2
Thanks
Sent from my IRIS_501 using XDA Premium HD app
Plz Developers do not include Your OWN Name
Thanks Bro this is use full to Me
Developers do not include Your OWN Name On Boot Logo That Is lucking bad sorry for say That All peppol hate That Plz understand
People Not Like Your Own Name On Phone start
Sent from my Samsung GT-S9081 using xda premium
Can anyone plz provide me boot logo of micromax A110 stock jb...one which is posted is of ics
Sent from my Micromax A110 (Canvas 2) using xda premium
dealoflove said:
If you have installed Custom ROM but want Micromax A110 stock boot logo/ boot Animation / Shutdown Animation back. Download the zip file and use CWM to install
Cooked, Tried & Tested by me
Hit thanks if you used it
http://ge.tt/31JLFKb/v/0?c?c
Click to expand...
Click to collapse
Thanks buddy
Hey guys Here is the rooting process for the New celkon A119 HD (works perfectely with win7-32bit)(may work with 64 bit but not tested)
Install the drivers first
1) Download the below files
2) flash the recovery using sp flash tool(google for how to flash recovey using sp flashtool)
3) Now copy the su.zip in sd card
4) flash it in cwm recovery(press the power on by pressing the Vol + button and press Power. to boot in cwm)
5) congratulations your device should now be rooted
Post here for any errors:.....
Download links:
Drivers:
http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Scatter file :
http://forum.xda-developers.com/attachment.php?attachmentid=1368549&d=1349123958
Recovery.img
https://docs.google.com/file/d/0B0Ayx0vkowzMR2M1UjU1bktja2M/edit
Sp flashtool:
http://depositfiles.com/files/trzpu2txz
Su.zip:
http://www.4shared.com/zip/Di_prp6c/CWM-SuperSU-IQ6.html?
Click to expand...
Click to collapse
Another Links:
Here are the instructions...
Connect the phone using the USB cable and select MTP Device instead of USB Storage.
USB Debugging must be selected.
Then install the PdaNetA4126 setup file to install the drivers for the Phone.
Once installed, open the celkon one click rooter folder and run the RUN.BAT file..It will root the phone. That's it..
Follow the exact steps from this link..
http://droidchina.com/forum/Thread-P...er-For-Windows
Download links are in this post and in the above link...
Happy rooting..
hi
dude ....
when i try 2 root im getting error like this plz help me...
SP FLASH TOOLS ERROR: (8038)..
plz help me dude
Best idea is first try rooting your device with Following :
Binary root tool(http://forum.xda-developers.com/showthread.php?t=1886460)
droidser root tool(http://www.mediafire.com/?ycd0tr536xa7gch)
If successful then i'll further inform you how to flash recovery
Shrihari007 said:
Best idea is first try rooting your device with Following :
Binary root tool(http://forum.xda-developers.com/showthread.php?t=1886460)
droidser root tool(http://www.mediafire.com/?ycd0tr536xa7gch)
If successful then i'll further inform you how to flash recovery
Click to expand...
Click to collapse
Hi
Dude....thanks for helping....
but its done everything but its not showing "SU" app in app drawer ......
can u tell me how to root ...plz Dude.
download any one of the tools from above thread and open the script.
next connect the device and select root options.(remember you need have installed adb drivers.)(to install drivers download pda net and install it)
now select root option and dont disconnect the device until the rooting process in successful(try for both the tools given above)
way708 said:
Hi
Dude....thanks for helping....
but its done everything but its not showing "SU" app in app drawer ......
can u tell me how to root ...plz Dude.
Click to expand...
Click to collapse
You need to reboot if icon doesn't show up.
Sent from my Celkon A119Q using Tapatalk 4 Beta
Hi, Any development on this ????????
until there are some members (atleast of around 5 i think its no use of developing a rom to the device...)
Celkon A119q Signature HD reboots randomly sometimes with 4.2.1. Any ideas?
Sent from my Celkon A119Q using Tapatalk 4 Beta
Can u show the untutu 3.3 test benchmarks score and system info in screenshots.
Sent from my Aqua Wonder Quad Core using xda premium
http://forum.xda-developers.com/showthread.php?t=2337698
celkon a119 hd custom rom....
PLEASE CHECK IT OUT AND POST THE BUGS IF WORKING..
ALSO I WOULD LIKE TO POST SOME ROMS FOR CELKON A119Q HD IN A WEEK...TRY IT AND REPORT IF THEY ARE WORKING.
Successfully rooted my Celkon A119Q Signature HD.
Thanks for posting the links..
I have Successfully rooted my Celkon A119Q Signature HD.
Pariki said:
Thanks for posting the links..
I have Successfully rooted my Celkon A119Q Signature HD.
Click to expand...
Click to collapse
How is it working after rooting??
Sent from my Celkon A119Q using Tapatalk 4 Beta
pcoruganti said:
How is it working after rooting??
Sent from my Celkon A119Q using Tapatalk 4 Beta
Click to expand...
Click to collapse
It is working good. I have removed most of the factory stuff/apps. Battery life is good now.
Pariki said:
It is working good. I have removed most of the factory stuff/apps. Battery life is good now.
Click to expand...
Click to collapse
Can you plz share the link for instructions
Sent from my Celkon A119Q using Tapatalk 4 Beta
pcoruganti said:
Can you plz share the link for instructions
Sent from my Celkon A119Q using Tapatalk 4 Beta
Click to expand...
Click to collapse
==============
Sure..Here are the instructions...
Connect the phone using the USB cable and select MTP Device instead of USB Storage.
USB Debugging must be selected.
Then install the PdaNetA4126 setup file to install the drivers for the Phone.
Once installed, open the celkon one click rooter folder and run the RUN.BAT file..It will root the phone. That's it..
Follow the exact steps from this link..
http://droidchina.com/forum/Thread-PDAnet-ADB-USB-Driver-For-Windows
Download links are in this post and in the above link...
Happy rooting..
Successfully rooted the phone now. Any option to flash cwm on this phone???
Sent from my Celkon A119Q using Tapatalk 4 Beta
pcoruganti said:
Successfully rooted the phone now. Any option to flash cwm on this phone???
Sent from my Celkon A119Q using Tapatalk 4 Beta
Click to expand...
Click to collapse
================
Great...
Not sure about the CWM...I did not try that. But you could check for the steps in this post or Google it.
No custom roms for this phone..Not sure if any developer works on this phone..
I sold my Celkon A119Q Signature HD and brought Samsung Galaxy Mega 6.3 I9200 phone.
Successfully rooted it and has CWM on it now..
to flash cwm download this file
https://docs.google.com/file/d/0B0Ay...U1bktja2M/edit
and now install mobile uncle tools from android market.
select install recovery and select the above recovery and press ok....done you have the cwm recovery....
Press thanks if helped...
Waiting for my mobile to ship
Will try to port MIUI5 for it
Steps to Root Canvas 2 Plus A110q V2 ROM:
Note: Rooting voids your warranty. So know the consequences before doing it.
Also if your phone gets damaged, I am not responsible for it.
You can find V1 or V2 by seeing your phone's "Custom Build Version" in Settings > About.
If it ends with "xx_MMX_12_flasher_user" then its V1 and if it is "xx_MMX_16_flasher_user" then it is V2.
Step 1 : You need to flash CWM recovery using SP-Flash Tools. First install drivers (USB Drivers MMX A110Q)
Step 2 : Download and Extract SP-Flash Tools
Step 3 : Download and Extract Scatter File and Preloader files
Step 4 : Download, Extract and Rename as recovery.img
Step 5 : Put Preloader, recovery.img and scatter file in one folder. Open Flash_tool.exe from SP_FLASH Tools
Step 6 : Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from created folder and Select "Download" option, it will search for phone now (note three files are selected that are in folder)
Step 7 : Switch OFF the phone. Connect it with USB (in OFF state only) (proper divers must be installed as said above)
Step 8 : If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means recovery is flashed.
Step 9 : Download SuperUser binaries and place zip file in root of your sdcard
Step 10 : Press Volume Up + Volume Down + Power button for some seconds and enter recovery mode
Step 11 : Select install zip from sdcard and select the downloaded file. Flash it.
Step 12 : Check if it is properly rooted with root checker app
*** You must backup in CWM after step 10. So your data remains safe.
Once it is rooted, remove bloat stock apps and free up some space. Then you can remove this root and re-root again with traditional method and/or you can also replace stock recovery if you dont need cwm.
PLs feel free to say thanks if you like my post
Credits : Ashish Yadav
Bro give credit to sarang this is not fair
Sent from my Micromax A110Q using XDA Premium 4 mobile app
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
If u want custom rom just go to this thread http://forum.xda-developers.com/showthread.php?t=2457621
Sent from my Micromax A110Q using XDA Premium 4 mobile app
.?
Ashish yadav and sarang both helped each other
Sent from my Micromax A110Q using XDA Premium 4 mobile app
Hi in my device i have Bluetooth issue... I cannt able to send r recieve any files ...i bought my device last week only my versn s jelly bean 4.2...pls help me
Sent from my Micromax A110Q using xda app-developers app
Sent from my Micromax A110Q using xda app-developers app
Wrong place to ask question my friend
Create a new topic or visit micromax care
Sent from my Micromax A110Q using xda app-developers app
Happy Diwali everyone
After loading files and pressing download it gives an error saying that all files are not loaded do you still want to continue it mat cause problem..... What to do?
Sent from my Micromax A110Q using xda app-developers app
---------- Post added at 07:57 PM ---------- Previous post was at 07:55 PM ----------
I selected scater file then the file above it is automatically chosen ie. 2 files are chosen....... U have mentioned 3 files so which is the third one and. How to load it. ?
Sent from my Micromax A110Q using xda app-developers app