Huawei M835 ROM Troubles - Miscellaneous Android Development

Okay so I kind of put myself in a messed up situation:
I installed Clockworkmod Recovery and ROM Manager so I could install the unofficial CM7 port, I tried to install the update.zip but it failed part way through due to "Error 7" So I tried to wipe my /system, and /cache & Dalvik Cache and battery stats. After that it still didn't work so I tried to do that sd-ext thing in the mounting section of clockworkmod (Or in the advanced section) it ruined my SD card, I could not format it on my PC. I tried this again with another card, that one is now ruined too. So basically now i'm stuck with a phone that will not boot past the boot logo, no cards to reinstall the stock firmware. And I DO NOT HAVE A USB CABLE TO MOUNT EITHER. Which wouldn't work anyway because my cards are ruined. Please help this my only device!!!!
Update:
I got the stock firmware and reinstalled it, so now I'm gonna start fresh and root it again and everything. If anyone can provide help with installing custom ROM's and/or tell me what I did wrong it would be much appreciated.
Version: Froyo 2.2
Phone: Huawei M835
Carrier: MetroPCS
Clockworkmod Recovery: 5.x for the Ideos (Supposed to work on the M835)

Related

[q] please please please help** i can only go as far as the bootloader

PLEASE PLEASE HELP i tried unlocking and rooting my nexus s, but i epic failed... now i can only access the bootloader... so i accessed it... unlocked it.. then tried to flash the clockworkmod recovery.. it said OKAY but then just gets stuck at the google screen with an unlocked lock.. i can't even access my phone.. i can only access the bootloader and im freaking out please help !
I don't like 3.0.2.4 so download http://forum.xda-developers.com/showthread.php?t=988686 corresponding to your Nexus S model
rename it to recovery.img [assure that you have extensions shown otherwise it'll be recovery.img.img]
put it in /sdk/tools/
set your phone in bootloader mode
cd <wherever your SDK is>
fastboot flash recovery recovery.img
go into recovery
OH MY GOSH, KAY NOW I HAVE CLOCKWORK MOD but i can't access my internal SD card.. and it still won't fully boot.. again it just gets stuck at the google bootscreen.. but atleast i have clockwork mod.. so whats next ? :O
so i got clockwork recovery, and as soon as i get into it.. it gives me a bunch of errors about not being able to mount cache and find it and find the recovery.log (about 8 or 9 lines of code).. but the recovery still works.. and i found a stock zip from google search.. now i tried to flash it (by first mounting my storage.. then putting the zip on my storage).. then tryed to a restore from the recovery.. it checks MD5 sums.. then it gives me a lot more error codes... could you please help ?
Well, to begin with, you should specify your phone model and provider because each build needs different ROM. And you shouldn't flash any random ROM from google. Instead try to lookup for the correct stock ROM in the Nexus S Development forum.
well im with Rogers Wireless (From Canada) and my phone model is the GT-I9020 and the problem im pretty much getting now is that it can't find boot and cache partitions...
EDIT** i can access adb aswell now
Have you tried downloading and flashing a custom rom from the nexus s android development section? (CM7 for instance) You mentioned previously that you put a stock zip to your internal storage but ended up restoring instead? Try downloading a custom rom, mount USB drive, copy the rom to the sdcard, unmount USB drive, wipe factory, wipe cache, advanced>wipe dalvik, choose zip to install, install the custom rom. Ideally that should get you past the Google logo and into a working build.
Sent from my Nexus S using XDA App
the thing is.. it can't even restore the original zip.. like the partitions can't be found.. and it seems like its a brick now plus the phone isnt rooted... i was trying to root it.. then this whole thing came up...
When you say restoring from original zip, are you talking about a nandroid backup? Or a stock rom you downloaded? In any case, I would still recommend doing what I mentioned earlier. And no, your phone is not bricked at all.
Sent from my Nexus S using XDA App
it's a nandroid backup ( i took the img. bundle in the folder thats labeled with the date *ie. 2010-12-22.21.06.07*).. i tried installing this as a backup.. and it wouldn;t work.. i got *checking md5 sum.. then 6 or 7 lines of code all seeming to relate to not being able to mount the cache partition and not being able to find recovery.log in the /cache... so i think my cache-ext is screwed up.. I tried using the sdpart script in adb.. and it didnt help matters... so im not sure what to do now

[Q] Infuse 4G Bricked

Hi, i'm a relative noob to rooting and rom flashing but i know the basics and have successfully installed cyanogen on other phones and devices in the past. So essentially I am trying to install jellybean on my infuse 4g (on rogers). I begun with this guide (http://forum.xda-developers.com/showthread.php?t=1776129) but and gotten stuck trying to install entropy's cm9 (http://forum.xda-developers.com/showthread.php?t=1601844). i flashed the rom and then formatted the data, system and cache, but then realized forgot to put the ICS gapps bundle on the sd card before i started. So i flashed once, did the formatting of data, system, cache, then attempted to boot and now im stuck at the samsung screen. It just hangs at that screen every time i try to boot. I have the red CWM screen and can get to CWM, but whenever i try to mount the SD it does not show up on my PC (Mac too) so i can't put any thing on it to flash and fix it.. when i attempt to flash the cm9 rom again it says [bad] and aborts. If anyone could help me out in where to go from here. I have done some reading about setting up ADB to push a rom to it, but will that work if i cant even mount the sd in the first place. CWM allows me to mount and say it should be active but i get nothing on the pc. Also which rom should i use to fix it.. also i follwoed the instructions and have Qksters IMEI backup script run (I'm not exactly sure what this does).
Thanks
phillyjevs said:
Hi, i'm a relative noob to rooting and rom flashing but i know the basics and have successfully installed cyanogen on other phones and devices in the past. So essentially I am trying to install jellybean on my infuse 4g (on rogers). I begun with this guide (http://forum.xda-developers.com/showthread.php?t=1776129) but and gotten stuck trying to install entropy's cm9 (http://forum.xda-developers.com/showthread.php?t=1601844). i flashed the rom and then formatted the data, system and cache, but then realized forgot to put the ICS gapps bundle on the sd card before i started. So i flashed once, did the formatting of data, system, cache, then attempted to boot and now im stuck at the samsung screen. It just hangs at that screen every time i try to boot. I have the red CWM screen and can get to CWM, but whenever i try to mount the SD it does not show up on my PC (Mac too) so i can't put any thing on it to flash and fix it.. when i attempt to flash the cm9 rom again it says [bad] and aborts. If anyone could help me out in where to go from here. I have done some reading about setting up ADB to push a rom to it, but will that work if i cant even mount the sd in the first place. CWM allows me to mount and say it should be active but i get nothing on the pc. Also which rom should i use to fix it.. also i follwoed the instructions and have Qksters IMEI backup script run (I'm not exactly sure what this does).
Thanks
Click to expand...
Click to collapse
the samsung boot loop is to be expected when flashing cm9. If CM9 is not your target Rom, then having GApps on your SD card or not doesnt matter. Carefully refollow the step in CM9 then continue onto cm10. After you do the three finger salute, your cwm will be blue. if all else fails, odin back to stock and start over..just make sure you have GApps when you reach the time to flash cm10.
You need to go to mount then unmount the first set. Then re flashee infinitum.
Sent from my SGH-I997 using xda premium

Can't Install any ROMS

Restored the Tablet TF101 back to stock rooted and everything worked. Installed CWM Did factory reset system wipes etc. Tried to install 3 different CM 10 all failed bad installation. Tried to installed the newest TWRP same thing I can't seem to install any rom from the external or internal just keeps saying bad?
What errors did TWRP tell you?
For TWRP why not download the GOO app from the playstore and find the option in the menu to allow it to install the open recovery script for you?
Had similar issues with my S4 with a particular rom but youve tried a few so i doubt its down to the download sites.
You may have to format the emmc and see how that goes as a last resort. (just make sure you have a rom placed on a micro sd as it will completely wipe the TF again but still keep your recovery)

[Q] Stuck in recovery restart limbo

Hello all,
Last night I was trying to install the latest Gummy release on my Verizon Galaxy S3. This was the first time I have tried to flash a rom on this phone. It failed, and I rebooted my phone, and now it will only boot into the clockwork recovery.
I thought it may have been damaged as i was transferring the file to the device. I had an SD card in my droid X, So I put it in my Galaxy and formatted it with clockwork. Then I transferred the gummy release (that I also re-downloaded) from my computer to the SD card via a memory card reader. I put it in my Galaxy and tried to install the release, and it gave me a different error
Code:
E: Can't Open /external_sd/Gummy-2.1-01-09-14-NIGHTLY-d2vzw.zip
(bad)
Installation aborted.
Edit: Tried a few other roms and they had the same issue, but Cyanogen Mod 10.2 worked. Anybody have any guesses why?
Edit2: Further developments, Trying to do the latest nightly fir the CM yields the same issue that Gummy's release gave me initially. It reports as follows:
Code:
E: Error in /external_sd/cm-11-20140110NIGHTLY-d2vzw.zip
(Status 7)
Installation aborted
Is there possibly a firmware issue at play?
Did u unlocked ur recovery. And if ur trying to flash a KITKAT rom u need the latest clockwork recovery
I'm having this exact issue except I currently have TWRP 2.6.3. I wiped data, cache and internal and it actually booted the below ROM (the first boot) but once I got everything setup and rebooted the device it will not boot beyond recovery. It hangs on the Samsung boot logo. I've tried to restore to a 4.1.2 ROM as well as install 4.3 and 4.1.2 again multiple times but they will not boot. Any direction would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2601536
twistedillutions said:
Did u unlocked ur recovery. And if ur trying to flash a KITKAT rom u need the latest clockwork recovery
Click to expand...
Click to collapse
Sorry, forgot to mention, I did unlock with EZunlock. Would the clockwork on the play store be the latest one, or is there another place with more up to date versions?
Cappurnikus said:
I'm having this exact issue except I currently have TWRP 2.6.3. I wiped data, cache and internal and it actually booted the below ROM (the first boot) but once I got everything setup and rebooted the device it will not boot beyond recovery. It hangs on the Samsung boot logo. I've tried to restore to a 4.1.2 ROM as well as install 4.3 and 4.1.2 again multiple times but they will not boot. Any direction would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2601536
Click to expand...
Click to collapse
Do you get the same error on install that I'm getting, ro are the installs finishing, but not booting?
Try goo manager or ez-recovery to install the latest recovery
right now i can think of
factory reset format data. Make sure u backup ur internal
Wen changing from rom to rom is a good thing to do a clean install
get the right gapps.
The 1st boot always takes time at least on me.
Sorry i cant think of more helpful things.. Been drinking
Looks like my recovery just needed an update. Thanks everyone.
Sent from my Nexus 7 using Tapatalk
Confirmed also an old recovery for me as well. Thank you very much!

Help needed. S7850 flashing LOS14.1. Stuck on Samsung logo.

Hmm, I see there is the same topic with the same problem in Help & Troubleshooting so I'm sorry I did't checked it. If moderator could close or move my post please. Greetings.
Hello
I need some help please.
My phone is so annoying.
Funny thing is that I have 2 pcs. Samsung Galaxy Trend Plus (GT-S8750).
phone #1 I managed to flash TWRP and then LOS. 14.1 (lineage-14.1-20170819-UNOFFICIAL-kyleproxx.zip) with no problem at all.
#2 With second phone (the same model) some strange things started to happen. I flashed newest TWRP and restarted to recovery. First problem was with copying rom zip files to internal sdcard when phone was in TWRP (mpt connection). It was unable to finish copy task, phone restarted during copy operation. So I tied to use external SD card. But was unable to flash rom from ext sd card (unfortunately I don't remember errors).
Then there was a problem with wiping (exactly internal memory wipe).
Now the phone state is it's stuck on Samsung Galaxy Trend Plus logo. I can't run recovery (no factory nor custom). Tried to flash stock rom in odin, it succeed, but can't run system (stuck on samsung logo), can't run recovery anymore.
I have no idea what to do now.
Anybody have any idea?

Categories

Resources