Database Info

[SOLVED] One S - a little stuck between roms

Hello.
I'm coming from HD2 and Sensation recently and wanted to get a custom rom for my new One S. I'm inexperienced with this model.
I followed the unlock / cwm / root procedure in the excellent guide sticky. Everything went very well and I tried Jellybam. Got the boot anim but no full boot. I forgot to back up the stock rom so there I was with no working rom and no way to copy a new one onto the sdcard partition.
After some research I've been able to push new rom files to the sdcard partition through adb but I can't seem to get anything to boot on this thing.
I also tried relocking but I cant find which RUU to match my CID (HTC__Y13), I tried all the EU RUU's but they all give me the signature error upon flashing.
So I'm not bricked, I can still install different recoveries and use fastboot. It's just that nothing boots. What am I missing out on here? Oh, and QuickADB tells me that I am not rooted and busybox is missing although I've ran SuperSU CWM.
Any thoughts?

QuickADBPusher is unable to acquire root because you are on stock rom/kernel. The Q&A section tells you that
Have to fastboot flashed boot.img? Its required for hboot above.... urm.. Dunno, but 1.14 needs it anyway.

Goatshocker said:
QuickADBPusher is unable to acquire root because you are on stock rom/kernel. The Q&A section tells you that
Have to fastboot flashed boot.img? Its required for hboot above.... urm.. Dunno, but 1.14 needs it anyway.
Click to expand...
Click to collapse
I now tried to follow the instructions for flashing custom rom on HBOOT > 1.09. So I extracted the boot.img from my desired ROM package. Then I went for another adb push of the rom file (I had done a clear memory in the meantime) and now I'm getting protocol error all over the place.
I miss my HD2. I even miss my Pyramid now...
EDIT: The boot.img flashed fine though.

Wait wait! It worked!
Finally got MIUI (my secret lover) pushed and boot.img extracted and flashed.... and voila!!
Goatshocker! Major respect and bigups for your little advice for the n00bs but first and foremost for all the work you do for our community. You rock man.

Oh thanks. I dont think I do that much though but I try to help where I can

Goatshocker said:
Oh thanks. I dont think I do that much though but I try to help where I can
Click to expand...
Click to collapse
It's always those little things that pass us by.
Hope this thread can help other EU users though. Many of the posts on One S kind of imply that your'e on a low hboot. (Other markets, branded and so forth) But the phones we get these days up here are unbranded 2.15 by stock and you'd always have to manually flash boot as I understand.
Hopefully theres enough food in here for the search engines so that others might find it. Ah. A great day after all.

[Q] I need the straight poop on flashing a custom ROM

Before I get flamed, let me say that I have done ALOT of research on the questions I am about to ask, and the fact of the matter that there is a lot of conflicting information out there. So please bear with me.
I am on a rooted phone, Android 4.1.1, Sense 4+, 3.18.502.6 radio, kernal version 3.4.10
Rooted with S-on
So here's my questions:
1. Can I install a custom rom with S-on?
2. If the answer is yes, can someone give me the quick run-down, or at the very least point me in the direction of another thread that I can refer to?
3. I have read conflicting threads that claim that with S-on, I need to flash the boot.img first, other threads say just go ahead and flash the ROM
Some of these threads are 30+ pages long and go back to 2012. If you miss one post in the thread then you're screwed. Any help is appreciated. For the record these forums have been extremely helpful. Successfully rooted two phones in the past year. I understand the rooting very, flashing custom roms gives me the willies.

First thing, why not just s-off and solve your problems? It's super simple. http://forum.xda-developers.com/showthread.php?t=2155071
But the answer is... Sometimes. Sometimes you need to flash the boot.img. If you're unsure, just do it anyways. This can be done by
1. Extracting the boot.img from the ROM zip archive you wish to flash.
2. Placing it in your adb working directory.
3. Enter fastboot on your phone.
4. fastboot flash boot boot.img
Sent from my HTC One X using Tapatalk 4

RollTribe said:
First thing, why not just s-off and solve your problems? It's super simple. http://forum.xda-developers.com/showthread.php?t=2155071
But the answer is... Sometimes. Sometimes you need to flash the boot.img. If you're unsure, just do it anyways. This can be done by
1. Extracting the boot.img from the ROM zip archive you wish to flash.
2. Placing it in your adb working directory.
3. Enter fastboot on your phone.
4. fastboot flash boot boot.img
Sent from my HTC One X using Tapatalk 4
Click to expand...
Click to collapse
Thanks Man! I'll give the S-off a shot. I'll take your advice and just flasht he boot.img, just to be on the safe side
I am thinking about flashing the CleanRom, unless anyone has any other suggestions

Fivetenfrank said:
Thanks Man! I'll give the S-off a shot. I'll take your advice and just flasht he boot.img, just to be on the safe side
I am thinking about flashing the CleanRom, unless anyone has any other suggestions
Click to expand...
Click to collapse
If you're s-off there's no need to flash boot.img.
Sent from my HTC One X using Tapatalk 4

RollTribe said:
If you're s-off there's no need to flash boot.img.
Sent from my HTC One X using Tapatalk 4
Click to expand...
Click to collapse
Thanks. One last question. Ok maybe not the last one but one more question regardless.
With custom roms, does the rom need to be based on the same firmware that's on my stock phone? I other words, right now my phone has build 3.18.502.6. I found a rom that I really like that's based on 3.8.402.1. Is that custom rom compatible with my phone?

Fivetenfrank said:
3. I have read conflicting threads that claim that with S-on, I need to flash the boot.img first, other threads say just go ahead and flash the ROM
Click to expand...
Click to collapse
The short (and incomplete) answer is that "it depends".
If you are s-on and hboot 1.14 or higher, you need to flash boot.img separately using fastboot. A few ROMs (ViperXL, some versions of CleanROM) will flash boot.img in the AROMA installer. But most will not.
Failure to do so will mean the kernel for the custom ROM is not flashed, and you will likely bootloop or be stuck on the boot screen.
Another option, as already mentioned, is to get S-off. But be aware that S-off means that all security checks are bypassed. Meaning you can flash lots of things, with security checks bypassed. Sometimes this is good, sometimes it can be really bad.
---------- Post added at 09:35 AM ---------- Previous post was at 09:29 AM ----------
Fivetenfrank said:
With custom roms, does the rom need to be based on the same firmware that's on my stock phone?
Click to expand...
Click to collapse
Typically no.
There are some exceptions. For instance, if you did OTA or RUU to get on the 3.18 stock ROM, the touch panel firmware was upgraded, and AOSP ROMs will not work right (no touch functions). The solution is to have S-off and downgrade the touch panel firmware.
Fivetenfrank said:
right now my phone has build 3.18.502.6. I found a rom that I really like that's based on 3.8.402.1. Is that custom rom compatible with my phone?
Click to expand...
Click to collapse
Link the ROM, and I can probably answer that for you pretty easily.

Notills his
redpoint73 said:
The short (and incomplete) answer is that "it depends".
If you are s-on and hboot 1.14 or higher, you need to flash boot.img separately using fastboot. A few ROMs (ViperXL, some versions of CleanROM) will flash boot.img in the AROMA installer. But most will not.
Failure to do so will mean the kernel for the custom ROM is not flashed, and you will likely bootloop or be stuck on the boot screen.
Another option, as already mentioned, is to get S-off. But be aware that S-off means that all security checks are bypassed. Meaning you can flash lots of things, with security checks bypassed. Sometimes this is good, sometimes it can be really bad.
---------- Post added at 09:35 AM ---------- Previous post was at 09:29 AM ----------
Typically no.
There are some exceptions. For instance, if you did OTA or RUU to get on the 3.18 stock ROM, the touch panel firmware was upgraded, and AOSP ROMs will not work right (no touch functions). The solution is to have S-off and downgrade the touch panel firmware.
Link the ROM, and I can probably answer that for you pretty easily.
Click to expand...
Click to collapse
It won't link to the rom because XDA won't let me because I am a new user. It's Scott's CleanRom version 6.5. It says its built on the 3.17 OTA build
My phone is a week old. It stock with 4.1.1 and 3.18.502.6. No OTA updates happening here. So can I assume the touchpanel firmware will NOT be an issue since 3.18 is stock?
And I'm not going to mess with S-off. Ill stick with S-on for now.

You should be fine to flash it. Like redpoint said, you may have to flash the boot.img. I can't remember whether CR6.5 flashes the boot.img for you or not. To be on the safe side, go ahead and flash it.

Fivetenfrank said:
It won't link to the rom because XDA won't let me because I am a new user. It's Scott's CleanRom version 6.5. It says its built on the 3.17 OTA build
Click to expand...
Click to collapse
Fair enough. CR6.5 will work great. One thing to note however, recent versions of TWRP (2.4 and 2.5) are known to be problematic and will not work with CR6.5. Either use an older TWRP (2.3) or use the official CWM.
Fivetenfrank said:
My phone is a week old. It stock with 4.1.1 and 3.18.502.6. No OTA updates happening here. So can I assume the touchpanel firmware will NOT be an issue since 3.18 is stock?
.
Click to expand...
Click to collapse
That would be the incorrect assumption. Since the phone came out of the box with 3.18, it will have the upgraded touch panel firmware. Meaning AOSP ROMs will not have a functional touch screen, unless you S-off and downgrade the touch panel firmware.
For Sense ROMs, its doesn't matter, you are fine with the upgraded touch panel firmware.
BTW, please hit the "Thanks" button for any posts that you found helpful!

redpoint73 said:
Fair enough. CR6.5 will work great. One thing to note however, recent versions of TWRP (2.4 and 2.5) are known to be problematic and will not work with CR6.5. Either use an older TWRP (2.3) or use the official CWM.
That would be the incorrect assumption. Since the phone came out of the box with 3.18, it will have the upgraded touch panel firmware. Meaning AOSP ROMs will not have a functional touch screen, unless you S-off and downgrade the touch panel firmware.
For Sense ROMs, its doesn't matter, you are fine with the upgraded touch panel firmware.
BTW, please hit the "Thanks" button for any posts that you found helpful!
Click to expand...
Click to collapse
I think I am in good shape. CleanRom is built on Sense. Ill flash the boot.img first to be on the safe side. Btw according to Scott's website for this Rom, with respect to TWRP vs CWM, this is what he says:
"Must have TWRP Recovery installed with unlocked bootloader! CWM Recovery not supported!" Can I get a clarification?
Once this is all done ill post and let everyone know how I made out. Going back now and "thanking" all who have replied

Fivetenfrank said:
I think I am in good shape. CleanRom is built on Sense. Ill flash the boot.img first to be on the safe side.
Click to expand...
Click to collapse
Since your phone is on 3.18, and CleanROM is 3.17 base, I don't know if you can be completely sure there haven't been kernel changes. You're right, it might be the same (or same enough) kernel, but to be on the safe side, it won't hurt to flash the boot.img.
Fivetenfrank said:
Btw according to Scott's website for this Rom, with respect to TWRP vs CWM, this is what he says:
"Must have TWRP Recovery installed with unlocked bootloader! CWM Recovery not supported!" Can I get a clarification?
Click to expand...
Click to collapse
Its an outdated statement. There was a time where CWM was only a unofficial (somewhat hacked) port, and caused some serious issues for some people, that then wrongly blamed scrosler and his ROM.
None of this is very relevant any longer. CWM is officially supported for our device. It works great with CleanROM 6.5 (its what I'm currently using); when I will guarantee you that the latest TWRP 2.5.0.0 will not work with CleanROM 6.5. And anything after TWRP 2.3.1.1 is known to be problematic for our device. So its really up to you, which recovery is the best to use.
If you pick CWM, this is the thread you want:
http://forum.xda-developers.com/showthread.php?t=2148909

redpoint73 said:
Since your phone is on 3.18, and CleanROM is 3.17 base, I don't know if you can be completely sure there haven't been kernel changes. You're right, it might be the same (or same enough) kernel, but to be on the safe side, it won't hurt to flash the boot.img.
Its an outdated statement. There was a time where CWM was only a unofficial (somewhat hacked) port, and caused some serious issues for some people, that then wrongly blamed scrosler and his ROM.
None of this is very relevant any longer. CWM is officially supported for our device. It works great with CleanROM 6.5 (its what I'm currently using); when I will guarantee you that the latest TWRP 2.5.0.0 will not work with CleanROM 6.5. And anything after TWRP 2.3.1.1 is known to be problematic for our device. So its really up to you, which recovery is the best to use.
If you pick CWM, this is the thread you want:
http://forum.xda-developers.com/showthread.php?t=2148909
Click to expand...
Click to collapse
Ok so noted. CWM is the way to go. So next question. How complicated is the process to remove TWRP before I flash CWM?

Fivetenfrank said:
Ok so noted. CWM is the way to go. So next question. How complicated is the process to remove TWRP before I flash CWM?
Click to expand...
Click to collapse
You don't have to remove TWRP. Just flash over the top of it with CWM.

Egrier said:
You don't have to remove TWRP. Just flash over the top of it with CWM.
Click to expand...
Click to collapse
Got it. Wish me me luck fellas. I am going to give this a whirl tonight
Hey while I have everyone's attention, are there any other roms out there worth checking out for someone like me? That's probably a loaded question given the fact that theres a boat load of Roms out there... but all opinions welcomed!

Fivetenfrank said:
Ok so noted. CWM is the way to go. So next question. How complicated is the process to remove TWRP before I flash CWM?
Click to expand...
Click to collapse
Just for the record, I'm not saying that CWM is necessarily better. Either CWM, or TWRP 2.3.1.1. Your choice. But TWRP 2.5 definitely does not work with CleanROM 6.5, and TWRP 2.4 has issues, also.
As already mentioned, no need to remove TWRP. Just flash CWM, and TWRP will be removed.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
Fivetenfrank said:
Hey while I have everyone's attention, are there any other roms out there worth checking out for someone like me? That's probably a loaded question given the fact that theres a boat load of Roms out there... but all opinions welcomed!
Click to expand...
Click to collapse
Yes, that is a loaded question. They are all worth checking out! To suggest one (or a few), would suggest the others are somehow "not worth" checking out. Which is really not fair to the devs that have worked so hard to give us these ROMs.
Look through the ROMs, and if any look interesting, try them. This is what most of us do. You already mentioned you aren't going to s-off yet, so the AOSP ROMs are out (due to the touch panel firmware issue).

redpoint73 said:
Just for the record, I'm not saying that CWM is necessarily better. Either CWM, or TWRP 2.3.1.1. Your choice. But TWRP 2.5 definitely does not work with CleanROM 6.5, and TWRP 2.4 has issues, also.
As already mentioned, no need to remove TWRP. Just flash CWM, and TWRP will be removed.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
Yes, that is a loaded question. They are all worth checking out! To suggest one (or a few), would suggest the others are somehow "not worth" checking out. Which is really not fair to the devs that have worked so hard to give us these ROMs.
Look through the ROMs, and if any look interesting, try them. This is what most of us do. You already mentioned you aren't going to s-off yet, so the AOSP ROMs are out (due to the touch panel firmware issue).
Click to expand...
Click to collapse
Yep, AOSPs are out. Thanks for all of your help everyone. Going to try this tonight. Hopefully I wont have a paperweight by this time tomorrow

Fivetenfrank said:
Yep, AOSPs are out. Thanks for all of your help everyone. Going to try this tonight. Hopefully I wont have a paperweight by this time tomorrow
Click to expand...
Click to collapse
Go slow follow directions and your phone will be fine. Don't skip steps or shortcut anything. That's where problems arise.
Sent from my HTC One XL using xda premium

also inpensi
31ken31 said:
Go slow follow directions and your phone will be fine. Don't skip steps or shortcut anything. That's where problems arise.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Thanks for the heads up. I am good on the instructions. I have found a multitude of posts outlining the steps. My biggest fear is/was the compatibility issue - flashing a rom that's not compatible with my phone. I tried flashing a Rom a couple of months ago on an HTC One X on 2.20, and I bricked it. I flashed the wrong Rom. Luckily AT&T didnt catch it and they gave me a new phone. I had to get another new phone this week past because my old HTC One X died for some unknown reason. AT&T gave me another one on warranty. This new one has the 3.18

Sounds like you flashed a ROM for the quad core "international" version (ENDEAVORU). Stick to this forum (says "AT&T" at the top) and any ROM you flash will be fine.
Or use my Index thread: http://forum.xda-developers.com/showthread.php?t=1671237

redpoint73 said:
Sounds like you flashed a ROM for the quad core "international" version (ENDEAVORU). Stick to this forum (says "AT&T" at the top) and any ROM you flash will be fine.
Or use my Index thread: http://forum.xda-developers.com/showthread.php?t=1671237
Click to expand...
Click to collapse
If my memory serves me correctly, that's exactly what I did.

Rogers One X Bootloop and RUU Failure (please help)

Hiya. Any help appreciated here, Got hold of a Rogers One X (evita)
Heres where I am at right now:
I unlocked the bootloader and attempted to flash CM11 (Got an error regarding update package) *I made no backup- Noob, I know.*
Now, at the very most all I can get into is CWM/TWRP (I can flash both of these without issue using fastboot)
I have attempted to re-lock the bootloader (which says relocked) but I have tried the 2 rogers RUU files I managed to find and both fail with an error 115 and leave me on the htc logo, and boot to bootloader only.
I tried to flash some custom roms, some seem to flash ok but just boot-loop.
I am not SuperCID, and the phone is S-ON.
Hboot-2.14.0000
Radio-0.23a.32.09.29
Nov 26, 2012
I cannot figure what to do next. I dont care what goes on the phone as long as i can get it working. Its been a long time since I messed with android, I only bought this phone for this reason lol, but I made the mistake of staying up too late and probably skipping half of the tutorials i was following.
Any help appreciated.
:laugh:

What version of TWRP are you using? Why did you relock the bootloader? You should unlock that again. Did you flash the boot.img from the ROM zip via fastboot after flashing the ROM in TWRP? You need to do this because you're s-on. You should read the Evita FAQ thread in my signature, as well as the How-To Guide For Beginners thread.
Sent from my Evita

timmaaa said:
What version of TWRP are you using? Why did you relock the bootloader? You should unlock that again. Did you flash the boot.img from the ROM zip via fastboot after flashing the ROM in TWRP? You need to do this because you're s-on. You should read the Evita FAQ thread in my signature, as well as the How-To Guide For Beginners thread.
Sent from my Evita
Click to expand...
Click to collapse
Wow, timmaaa, thanks for the superfast answer chap!
So, unlock the bootloader, flash the Rom (CM11), then the Boot.img extracted from the rom via fastboot?
Sounds like a plan. I will try that now. I think to be honest, I came home last night and ended up following a bit of one tut, a bit of another, and never really read properly. Call it friday evening alcohol induced noobness syndrome.

That should be it. You need to make sure you use the correct version of TWRP though, you're looking for the unofficial modified TWRP 2.6.3.0 by jrior001 in our Original Android Development section.
Sent from my Evita

timmaaa said:
That should be it. You need to make sure you use the correct version of TWRP though, you're looking for the unofficial modified TWRP 2.6.3.0 by jrior001 in our Original Android Development section.
Sent from my Evita
Click to expand...
Click to collapse
Thank you. The boot.img thing got me a bit further so far. I will get that version of TWRP installed and try the CM11 again, as i think thats where I want to be at. It should be as simple as CM11 flash, Boot.img flash, then Gapps and im done, right?

Perform a full wipe (cache/dalvik cache/factory reset/system), flash CM, flash gapps, flash boot.img, reboot into ROM.
Sent from my Evita

timmaaa said:
That should be it. You need to make sure you use the correct version of TWRP though, you're looking for the unofficial modified TWRP 2.6.3.0 by jrior001 in our Original Android Development section.
Sent from my Evita
Click to expand...
Click to collapse
Ok one last question Timmaaa, I have installed that TWRP, flashed CM11, also Gapps and the boot.img , and now I just get the rom bootlogo (spinning cyanogen etc) and nothing, it just sits there. Is there anything else that may need to be done? If theres not anything obvious, ill go read some more!
Thanks for the help so far!

scibot said:
Ok one last question Timmaaa, I have installed that TWRP, flashed CM11, also Gapps and the boot.img , and now I just get the rom bootlogo (spinning cyanogen etc) and nothing, it just sits there. Is there anything else that may need to be done? If theres not anything obvious, ill go read some more!
Thanks for the help so far!
Click to expand...
Click to collapse
What is the filename of the ROM zip you flashed? Did you check the md5 of the file after you downloaded it? Are you sure the flashing of the boot.img was successful?

Timmaaa, it seems it just took ages. I went downstairs for some juice, came back up and there it was, the setup screen! Beautiful.
Thanks for the help, it seems its not the technical i need to brush up on, but my paying attention and reading - lol!
Thanks again man! :good:

[Q] Cannot find the resources to undo this soft brick.

I have an AT&T HTC One x. Its ***Tampered*** ***Unlocked*** HBOOT 1 .09. 0000 S-ON
I had been running an older version of TWRP, and decided I was going to clear my phone and do a fresh start. I know, I know, I should have made a backup, but I felt pretty confident in what I was doing, and was in too much of a hurry to rationalize this.
I wiped both the OS and previous version of TWRP in order to update to the new ones. While in fastboot I flashed CLEANrom and the new version of TWRP, and my administrative command prompt confirmed that they were installed successfully. Even cleared the cache afterwards. Now is the difficult part. I've researched, and researched, and cannot find a solution for this problem. I keep having a Boot Loop.... I'm stumped guys... I need some sort of help, be it technical, or something to drink lol
Previous ROM was CM 10, with TWRP and PA GAPPS :good:

Check the Evita FAQ thread in my signature, your answer probably lies within.
Sent from my Evita

timmaaa said:
Check the Evita FAQ thread in my signature, your answer probably lies within.
Sent from my Evita
Click to expand...
Click to collapse
I don't see anything in your FAQ that I haven't already tried unfortunately.....

Exactly which version of TWRP is currently installed? Did you flash the boot.img via fastboot?
Sent from my Evita

timmaaa said:
Exactly which version of TWRP is currently installed? Did you flash the boot.img via fastboot?
Sent from my Evita
Click to expand...
Click to collapse
It's the newest version of TWRP that is out, and yes, I flashed it via Fastboot, and it says successful on both the recovery install and ROM install.

Have you tried flashing another ROM? I asked for the exact recovery version for a reason, please provide that information.
Sent from my Evita
---------- Post added at 03:48 PM ---------- Previous post was at 03:43 PM ----------
Also it isn't completely clear to me that you're flashing the boot.img from the ROM zip via fastboot after flashing the ROM in TWRP. Are you extracting the boot.img from the ROM zip and doing that or not?
Sent from my Evita

1332858898
timmaaa said:
Have you tried flashing another ROM? I asked for the exact recovery version for a reason, please provide that information.
Sent from my Evita
Click to expand...
Click to collapse
TWRP 2.7. And yes, I have flashed about 4 Roms all succeeded according to fastboot and still getting the boot sequence.:good:
Yes I have extracted the boot.img

timmaaa said:
Have you tried flashing another ROM? I asked for the exact recovery version for a reason, please provide that information.
Sent from my Evita
---------- Post added at 03:48 PM ---------- Previous post was at 03:43 PM ----------
Also it isn't completely clear to me that you're flashing the boot.img from the ROM zip via fastboot after flashing the ROM in TWRP. Are you extracting the boot.img from the ROM zip and doing that or not?
Sent from my Evita
Click to expand...
Click to collapse
yes the boot.img file was extracted. I get a confirmation that it was successful when I flash it on fastboot

Exactly which ROMs have you tried to flash?
Sent from my Evita

timmaaa said:
Exactly which ROMs have you tried to flash?
Sent from my Evita
Click to expand...
Click to collapse
CM 10.2, CM 11, CLEANrom 7.0. all via fastboot with confirmations.

outcold32 said:
CM 10.2, CM 11, CLEANrom 7.0. all via fastboot with confirmations.
Click to expand...
Click to collapse
Why are you flashing roms via fastboot? -_- You're making your life difficult. Wipe everything in TWRP then flash in TWRP. ALso, you should really s-off and update your firmware/hboot. via RUU. You will likely encounter issues running a newer software on an such an old firmware.

exad said:
Why are you flashing roms via fastboot? -_- You're making your life difficult. Wipe everything in TWRP then flash in TWRP. ALso, you should really s-off and update your firmware/hboot. via RUU. You will likely encounter issues running a newer software on an such an old firmware.
Click to expand...
Click to collapse
If you would have read the thread, you would have noticed, that I am in bootloop, therefor I cannot access the recovery. And I have to have access to the ROM on my phone in order to flash anything via TWRP so this is moot. My question isn't how to flash roms, it's why am I getting a loop when I am successful on a clean partition and clean flash of both the recovery and ROM? And to me, fastboot is way easier than TWRP. I guess I could get a UART and try to debug the sequence myself, but I have more important things to do than that. I was posting to see if anyone had any similar problems. And this phone is an original model and I haven't really bothered with the security off, since I only wanted to get rid of sense in the first place. It was unlocked well before any commercial unlocker was available for the evita(Literally no stable CM10 at all at the time), so it's a little finicky in the first place. I ran the RUU after I re-locked the bootloader, and I'm at least out of the loop. I'm just going get to a more stable version so that this process will be more streamline when I re do my unlock and stuff.
So I guess the only solution at this point I have for any problem like this is to use the proper RUU. I tried a couple of times with no success, and it seemed the charm was to re lock the bootloader ( Fastboot oem lock) in order to properly and successfully get the RUU to work.:good:

Wth are you even on about? Of course you can access recovery in a bootloop. How are you getting to fastboot without accessing the bootloader? from the bootloader you can access recovery. If recovery isn't loading SCREW flashing a rom, reflash your recovery, 2.7 TWRP preferably. and then boot to recovery, mount your USB, copy the rom and flash it. Recovery is more important than having a ROM.
I know what I am talking about, do you know what you're talking about?
FFS I am trying to help you, there's no reason for you to be an ass. You're having issues BECAUSE you're flashing your rom via fastboot. You cannot flash a rom via fastboot.

exad said:
Wth are you even on about? Of course you can access recovery in a bootloop. How are you getting to fastboot without accessing the bootloader? from the bootloader you can access recovery. If recovery isn't loading SCREW flashing a rom, reflash your recovery, 2.7 TWRP preferably. and then boot to recovery, mount your USB, copy the rom and flash it. Recovery is more important than having a ROM.
I know what I am talking about, do you know what you're talking about?
FFS I am trying to help you, there's no reason for you to be an ass. You're having issues BECAUSE you're flashing your rom via fastboot. You cannot flash a rom via fastboot.
Click to expand...
Click to collapse
You didn't read the thread. I'm not being an ass. The information is already there.I can not access the recovery at all. That's why I am in in this situation. And again, if you had read the whole thread, or the even the original post, you would know that I cannot access the recovery. The only reason I'm being as detailed as I am is so I don't have to repeat myself, as well as for other people who may encounter this problem. And Yes I know what I am talking about. If I didn't I probably wouldn't have gotten to this point, right?

Okie dokie. No point in arguing. You're right. I'm wrong. Glad it's all working now.
Sent from my One XL using xda app-developers app

outcold32 said:
You didn't read the thread. I'm not being an ass. The information is already there.I can not access the recovery at all. That's why I am in in this situation. And again, if you had read the whole thread, or the even the original post, you would know that I cannot access the recovery. The only reason I'm being as detailed as I am is so I don't have to repeat myself, as well as for other people who may encounter this problem. And Yes I know what I am talking about. If I didn't I probably wouldn't have gotten to this point, right?
Click to expand...
Click to collapse
Exad is right in saying that the reason you're having problems is because you're attempting to flash ROMs with fastboot. That isn't how it's done. The correct way is to flash your ROM with recovery. You're barking up the wrong tree, not only that but you're arguing with experienced people who are only attempting to help get you out of the mess that you've gotten yourself into. You came here for advice, but there's no point in asking for advice if you're just going to argue and dismiss what you're being told to do.
You said you can't access your ROM so you can't flash anything, that makes absolutely no sense, which leads me to believe you don't really know what you're doing. Get out of the mindset that you need to use fastboot, it's wrong. You're dealing with people who have extensive and intimate knowledge of this device, trust us, we know what we're talking about.
Exactly why can't you access recovery? If you can issue fastboot commands that means you can access your bootloader, if you can access your bootloader that means you can use your volume keys to scroll through the options and the power button to select recovery. What happens when you do that? Exactly which recovery have you flashed to your device? I need to the full filename of the recovery that you've flashed.
Sent from my Evita

outcold32 said:
And this phone is an original model and I haven't really bothered with the security off, since I only wanted to get rid of sense in the first place. It was unlocked well before any commercial unlocker was available for the evita(Literally no stable CM10 at all at the time), so it's a little finicky in the first place.
Click to expand...
Click to collapse
S-on is a downright dangerous place to be, if the phone is also SuperCID (which is very likely, since its the AT&T variant). exad is right in recommending s-ff, as he is about a good many things.

Can i go back to cm11s this way?

Hi! My question is lame, i know.. But here it goes anyway, i couldn't find a simple and direct answer..
Is less than a week that i have this phone, and i've been reading a lot of guides of how to rollback to cm11s.. the thing is i've flashed the latest CM12S signed zip ota through CM Recovery, everything is fine as i'm testing it right now..
My question is: if i want to go back to CM11S (in the case that i don't like CM12S or have some bugs), can i just wipe data / factory reset and cache in CM Recovery, and then flash the cm11s signed zip?
I haven't rooted or unlocked bootloader, is it relatively easy from what i read around here.. but i wondered if i had to go through all those steps (unlock bootloader, custom recovery, and then flash) or just doing the steps mentioned before will work just fine..
Is it better to fastboot flash or through custom recovery is fine also?
Thanks in advance!
PD: I'm also asking what do you think about some other 5.1.1 Lollipop ROM, custom kernel, etc.. I'm kind of a flashaholic and i would be able to install the custom recovery if would be really worth it
PD2: sorry for the bad english, i'm from argentina

cesarp3791 said:
Hi! My question is lame, i know.. But here it goes anyway, i couldn't find a simple and direct answer..
Is less than a week that i have this phone, and i've been reading a lot of guides of how to rollback to cm11s.. the thing is i've flashed the latest CM12S signed zip ota through CM Recovery, everything is fine as i'm testing it right now..
My question is: if i want to go back to CM11S (in the case that i don't like CM12S or have some bugs), can i just wipe data / factory reset and cache in CM Recovery, and then flash the cm11s signed zip?
I haven't rooted or unlocked bootloader, is it relatively easy from what i read around here.. but i wondered if i had to go through all those steps (unlock bootloader, custom recovery, and then flash) or just doing the steps mentioned before will work just fine..
Is it better to fastboot flash or through custom recovery is fine also?
Thanks in advance!
PD: I'm also asking what do you think about some other 5.1.1 Lollipop ROM, custom kernel, etc.. I'm kind of a flashaholic and i would be able to install the custom recovery if would be really worth it
PD2: sorry for the bad english, i'm from argentina
Click to expand...
Click to collapse
Just unlock your bootloader now, the longer you leave it the more difficult it'll be to backup your internal storage beforehand. You should really have it unlocked anyway as insurance against anything going wrong with your phone. Once you have unlocked it you can flash TWRP recovery, then the correct procedure to go back to CM11S would be to perform a full wipe (system, data, cache, dalvik cache) and then just flash the zip. As far as custom ROMs for this device go, there are many excellent options to choose from that offer extra customisation that you won't find on the stock ROM.

Don't we have to flash the firmware prior to flashing back to CM11s to prevent a hardbrick? I'm looking into doing this as well, so I'm just asking for my own clarity.

uansari1 said:
Don't we have to flash the firmware prior to flashing back to CM11s to prevent a hardbrick? I'm looking into doing this as well, so I'm just asking for my own clarity.
Click to expand...
Click to collapse
The firmware is contained in the official zip.

Heisenberg said:
The firmware is contained in the official zip.
Click to expand...
Click to collapse
Thanks! Stupid question, but can you please link me to the official zip? I already have TWRP installed, so it would be nice to revert sooner than later.

uansari1 said:
Thanks! Stupid question, but can you please link me to the official zip? I already have TWRP installed, so it would be nice to revert sooner than later.
Click to expand...
Click to collapse
You'll find them all here:
http://forum.xda-developers.com/showthread.php?t=2906746

Thanks!
Thank you both, i believe that this week i'll have some time and unlock the bootloader and flashing the TWRP recovery right away.. Then i'll see which ROM suits my use (i'm looking to battery friendly and high screen on time, will see the forums accordingly) and start the journey on this beautiful and well supported device
Also, thanks for the clarification of the modems.. Will be looking after that and make sure not to miss that step if required :good:

cesarp3791 said:
Thank you both, i believe that this week i'll have some time and unlock the bootloader and flashing the TWRP recovery right away.. Then i'll see which ROM suits my use (i'm looking to battery friendly and high screen on time, will see the forums accordingly) and start the journey on this beautiful and well supported device
Also, thanks for the clarification of the modems.. Will be looking after that and make sure not to miss that step if required :good:
Click to expand...
Click to collapse
Once you've flashed the ROM, please do share your results. I am still unsure if reverting from a Lollipop ROM to CM11S will cause issues with the radio and/or a softbrick of the device, as I've read that this "can" happen.

uansari1 said:
Once you've flashed the ROM, please do share your results. I am still unsure if reverting from a Lollipop ROM to CM11S will cause issues with the radio and/or a softbrick of the device, as I've read that this "can" happen.
Click to expand...
Click to collapse
Reverting from Lollipop to KitKat won't brick your device, whoever said that is wrong, and would have caused a brick because they didn't know what they were doing. You do need to make sure you flash a KitKat modem though, otherwise you'll have issues with the prox sensor.

Heisenberg said:
Reverting from Lollipop to KitKat won't brick your device, whoever said that is wrong, and would have caused a brick because they didn't know what they were doing. You do need to make sure you flash a KitKat modem though, otherwise you'll have issues with the prox sensor.
Click to expand...
Click to collapse
Thanks Timaaa...last question, I'm downloading the latest modem from this thread http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033.
Is this the correct flashable modem file to use, or do you recommend another for XNPH05Q?

uansari1 said:
Thanks Timaaa...last question, I'm downloading the latest modem from this thread http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033.
Is this the correct flashable modem file to use, or do you recommend another for XNPH05Q?
Click to expand...
Click to collapse
That modem should be fine.