This will work on any device, but i made this for my Mini-PC.
Basically it's the Brighthouse app (BHTV) to watch Cable.
Mods
====
* Root check removed
* HDMI check removed
* Livetv_layout.xml changed the list_channel layout from 330 to 480dp (wider mini-guide)
* miniguide_row.xml changed to be bigger everywhere. Fonts increased, icons tripled in size. Result is about 3 times bigger guide. Nice size rows that you can see from your couch.
Any questions, feel free to ask.
Sorry, but I can't understand use of this app for everybody.
How can I use this app? I have got MK808 and I'm from India.
RmatriX1218 said:
Sorry, but I can't understand use of this app for everybody.
How can I use this app? I have got MK808 and I'm from India.
Click to expand...
Click to collapse
you need brighthouse cable. By everybody, i probably should have said, every device, but you still need brighthouse. The thing is that the software is very limited for even Bright-house users, so i've unblocked it.
Trying this out, but got this message
On Epic 4G Touch over data. Will try on home WiFi in the evening...
The official app works, for the most part on my TF300T after I disable Debugging, doesn't seem to care about root anymore (the older version would not even load, complaining about root).
Sent from my SPH-D710 using Tapatalk 4
Works at home! Good job.
Sent from my TF300T using Tapatalk 4
And works great on my TF300T with CM10.2, especially the HD channels.
Sent from my SPH-D710 using Tapatalk 4
Yes!!!
I've been looking for this since I got my Mk808 in March. Thanks!
help for Aspire One
I have an Aspire One with Linux Loaded. Is there a way to make this work without the Windows loaded?
Hi orateam, is it possible you can remove the HDMI check on Verizon fios mobile app? It prevent me from watch my own cable on my own tv using the app. Thanks.
Fios Mobile app
buhohitr said:
Hi orateam, is it possible you can remove the HDMI check on Verizon fios mobile app? It prevent me from watch my own cable on my own tv using the app. Thanks.
Click to expand...
Click to collapse
Same here been trying to use my Samsung Tab 2 to mirror to my tv, but hdmi check prevents me to connect.
cappymt said:
Same here been trying to use my Samsung Tab 2 to mirror to my tv, but hdmi check prevents me to connect.
Click to expand...
Click to collapse
I found a way to by pass the check by install the "virtual hdmi" app.
if you can
I was wondering if u could post the original files so i can compare the changes and i also would like to know if the actual files could be copied to a newer version to mod say version 2.0.3 thanks for any info
Related
with the 720p recording on this phone, im thinking it would make a kick ass webcam...is that even a possibility though?
Root your phone, get DroidVNC, forward your ports correctly on your router.
Start droidVNC (you gotta be on wifi), start your camera app.
Now login to your ip with the port, and enter the pin code in droidvnc setting, and bam, you see your phone's camera. heck u can even control your android now.
http://www.appbrain.com/app/usbwebcam.application
oh wow, my phone is rooted but i didnt know i could do this
I can't find the free version of Droid VNC Server on the market...
b0dge said:
I can't find the free version of Droid VNC Server on the market...
Click to expand...
Click to collapse
I just checked, yeah it's gone weird, only donate version.
Weird thing is, it got updated last night to a new version with new icon, I updated it.
Hmmm.. any chance you could pull the .apk?
b0dge said:
Hmmm.. any chance you could pull the .apk?
Click to expand...
Click to collapse
Here it is.
Use an app called IP webcam does it all. For you.
Sent from my Nexus One using XDA App
One option available on the market is called DroidCam.
http://androidspin.com/2010/08/23/app-review-droidcam-turn-your-android-phone-into-a-webcam/
nxt said:
Here it is.
Click to expand...
Click to collapse
Brilliant. Thanks muchly!
I'll have a play with it when I get home from work.
droidcam works fine.
Obviously I have a Samsung Galaxy S 4G. I'm running a custom rom, the valhalla final. I recently purchased a tv out cable from samsung. It doesn't work on any tv I have. Is it because the tv's I own are older? Or does it have something to do with my rom? If this is the case can anyone suggest a rom whrere tv out works? Please help me!!
Did you go to display settings and turn on the TV out option? If so and it still doesn't work, it may be a TV issue. I've been able to use it on all the TV's I've tried.
Sent from my SGH-T959V using xda premium
You need to switch the yellow (video) input with the red (audio) input when connecting to TV.
lumin30 said:
You need to switch the yellow (video) input with the red (audio) input when connecting to TV.
Click to expand...
Click to collapse
I've actually found that only applies to certain TV's for some reason. It's weird. But good point, I forgot about that.
Sent from my SGH-T959V using xda premium
StonedYoda said:
I've actually found that only applies to certain TV's for some reason. It's weird. But good point, I forgot about that.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Typically this would be reversed, meaning it would depend on the cable used. The phone sends the video signal on the same output.
I tried any color combination possible. NOthing work. My guess so far is the tv that stoned yoda was talking about. And yes, to answer your question, I chcked tv out. I get a bad picture with static and stuff. By the way, after thinking about it, the switching the cables wont work. That only applies if you don't buy the samsung cable, which I did. The samsung cable has a converter in it. Samsung switched the terminals to give you the illusion you had to buy from them. So I guess Im gonna find a newer tv and try it.....stoned yoda do you run a custom rom?
Mine work on 15 year old anolog television. How much older could your tv be?
lumin30 said:
Mine work on 15 year old anolog television. How much older could your tv be?
Click to expand...
Click to collapse
Good god man you need a new TV.
I didn't say that was my only TV man.
Noob with a 6210. Peel sucks and I do want to use the ir to control stuff. Is it possible to get the the apk for Sony s tab remote and try to get it to work on this tab plus?
I searched and found not much but since the Sony finally has root I thought it might be a way to get this done.
frylock017 said:
Noob with a 6210. Peel sucks and I do want to use the ir to control stuff. Is it possible to get the the apk for Sony s tab remote and try to get it to work on this tab plus?
I searched and found not much but since the Sony finally has root I thought it might be a way to get this done.
Click to expand...
Click to collapse
U might want to wonder into one of their forums and ask one of the users if they would do you the favor of pulling that specific apk from their tab and have them upload it for u.
Sent from my GT-P6210 using XDA Premium HD app
Why would u not just use peel? I've got at least 5 TV'S @lone nit to mention all of my other players. It is sometimes a pain but works. Maybe the Sony one is that much better?
Sent from my GT-P6210 using XDA
On the face of it, the sony IR app is much better than peel, it supports sky uk satellite boxes and windows mediacentres, which I'm pretty sure peel doesn't, so I for one would love this app on my tab. I think I'll head over to the sony tab forum.
ksizzle9 said:
Why would u not just use peel? I've got at least 5 TV'S @lone nit to mention all of my other players. It is sometimes a pain but works. Maybe the Sony one is that much better?
Sent from my GT-P6210 using XDA
Click to expand...
Click to collapse
Peel sucks. Here's why:
1) Add an HDTV alone. So far so good as I can change inputs, channels, and volume on the TV.
2) Go to add a reciever. The self test powers the reciever on and switches inputs but when complete it will NOT save it to the room profile.
3) Start over andthis time tell Peel I use a reciever to adjust my volume. I select my TV and then it takes me straight to setting up the audio portion of the reciever. This saves both to my room profile but completely skips over the portion of setting my TV's inputs to make sure it's right for watching television. Kind of stupid that I have to use my TV remote to switch inputs on the TV now when Peel can/should be doing that for me.
4) Contact Peel and listen to them tell you that it's all the fault of the Galaxy Tab 7.0 + drivers and when ICS is released, with the updated driver, it might be fixed.
I've tried with a number of reciever & television brand combos to the extent of what I have in the house (3 TV's LG, JVC, Samsung and 2 AV Recievers Onkyo, Sony) and it does exactly the same with any combination of them.
Yup with the Sony u can control different equipment by choosing it from the main menu. With peel u can't
Thanks to the Sony guys for giving us the software packages now to start trying to get it to work and thanks to Paul for going over and asking for it
frylock017 said:
Thanks to the Sony guys for giving us the software packages now to start trying to get it to work and thanks to Paul for going over and asking for it
Click to expand...
Click to collapse
Mind uploading it and attaching the apk? I'd like to take a look at it
Sent from my SPH-D700 using xda premium
from the sony s tablet guys
below is from the guys over in the sony forum.
if it doesnt show up i think i have to get to 8 posts to post links but if you head over to the sony s tablet forums its in the theme section
so i went over the the AMAZE 4g forum and posted all the thanks for the roms and development that i am currently enjoying on my phone but it also got me to 8 Posts so here goes again from the sony guys
xyancompgeek said:
Here are the links:
http://www.mediafire.com/?f9t24nveu8kcpji
http://www.mediafire.com/?4w43z33g3tu6gxz
One is the software (9mb)
The other is the ir service (20kb)
Click to expand...
Click to collapse
i have tried to get this to install but it wont so im gonna rename it and try to install it from the mnt asec folder. thats where most of my propriatary stuff gets installed on my HTC but i am new to the samsung game
also we may want to take this over to the DEV section and see if anyone in there can work some magic on it?
It would be wonderful if you can get this to work. All of my TVs are Windows Media center based.
ok I tried to install with es explorer. Took it over to the system/app . Then fixed permissions and still no luck. Went to the store and put esfile on a demo Sony and found a bunch of bin files in system/bin don't know if I needed them but pulled em with Bluetooth anyway. Will try to mess with it some more tomorrow.
Btw, Sony s is on ICS and its smooth even with the slower CPU.
Hear that Samsung? Get us some 4.0 and a decent remote app!!!!!!!!
Look in Play App store for Touchsquid app. It now works with the Tab 7 plus and Tab 2. The demo version works with both even though it wasn't very clearly stated that it works with the 7 plus. It definitely does work with the t 7 plus and is very promising. There are two paid version with different capabilities.
Hey guys,
I used to stream my iphone screen to my PC and was able to control it using keyboard and mouse. Is there a similar way to do this with the skyrocket? It makes it convenient here at work. Thanks!
lyndone58 said:
Hey guys,
I used to stream my iphone screen to my PC and was able to control it using keyboard and mouse. Is there a similar way to do this with the skyrocket? It makes it convenient here at work. Thanks!
Click to expand...
Click to collapse
Try this. It is what I used when my screen was broke. Make sure you have adb running, else it will not launch. Another thing is it is not working anymore on my particular ICS Rom. Should work fine on any GB rom, though. Hope this helps!
Here is the link to the google code page for this project. I take NO credit for this helpful app whatsoever. Devs and further info can be found here- http://code.google.com/p/androidscreencast/
Note- It is a bit slower than your probably use to, but it is the only app I could find for our device.
^^ Thanks. Testing it now.
Our new app, VMLite VNC Server, should fulfill your needs, it does exactly what you need, to control android phones or devices from a PC, so you can use the external keyboard/mouse, etc. We app has fast responses, and works on rooted or non-rooted devices.
https://play.google.com/store/apps/details?id=com.vmlite.vncserver&hl=en
so far our users like it. You can simply click a button to do USB connection:
more info here:
http://www.vmlite.com/vaac/#usb_connection
i use a program called MyPhoneExplorer and the corresponding Android app is in the store.
Jeff
rebel1699 said:
Try this. It is what I used when my screen was broke. Make sure you have adb running, else it will not launch. Another thing is it is not working anymore on my particular ICS Rom. Should work fine on any GB rom, though. Hope this helps!
Here is the link to the google code page for this project. I take NO credit for this helpful app whatsoever. Devs and further info can be found here- http://code.google.com/p/androidscreencast/
Note- It is a bit slower than your probably use to, but it is the only app I could find for our device.
Click to expand...
Click to collapse
I have a Samsung Galaxy S3 AT&T and I also have a busted screen. I am trying to just pull my pictures off of it before my replacement arrives. I downloaded the SDK package you linked to but lack the knowledge to just get it to link to my phone via USB. To complicate matters I had it pattern locked but since I can't get the screen to work at all I can't unlock the phone. If I could my computer sees the phone as a portable device but won't show me any of it's files. Any pointers would be helpful.
Hmm
Well, I have a HDMI IN port in my rig . And with a MHL adapter, works perfectly fine on Windows 8.
mohan_kr said:
Well, I have a HDMI IN port in my rig . And with a MHL adapter, works perfectly fine on Windows 8.
Click to expand...
Click to collapse
I use an MHL adapter as well but will matter if the screen isn't functional? As far as I'm aware you still have to direct it via the touch screen....
yea..my bad..didn't read the question properly..
mohan_kr said:
yea..my bad..didn't read the question properly..
Click to expand...
Click to collapse
But it is a cool little accessory lol...have one for my tab too
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Wtf........ why did you post this here? Mod please delete.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
miahkmnwa said:
Hi friend, If you want get movie files off your iPhone to the computer or iTunes. Just i know that the most direct way is to use an iPhone transferring tool. I used to bought an iPhone 4S and take iPubsoft iPhone to Computer Transfer work well. Here,as an example to show you how to transfer movies from iPhone to computer. This program is easy to use and works well with all iPhone models like iPhone 5, iPhone 4S, iPhone 4 and iPhone 3GS. Download the software to master the way on how to transfer videos from iPhone to PC. Enjoy it !
Click to expand...
Click to collapse
Brain damage
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
iphone.....watt................kick ass
So I finally got a Nexus 7 and first thing I wanted to test was the WiFi Direct sharing with my Galaxy Nexus. I was kinda disappointed when I saw that neither the stock Gallery app nor any of my installed file managers offered a WiFi Direct sharing option.
So I took a look at the APIs and made my own WiFi Direct sharing app (after that, I saw that a similiar app is already available here on XDA).
I got it working between my Galaxy Nexus, Nexus 4 and the Nexus 7 and I guess it should also work on most other devices (unfortunately, WiFi Direct is really broken on some WiFi drivers).
You can get it from the PlayStore here: https://play.google.com/store/apps/details?id=de.j4velin.wifidirect
The latest version is attached to this post
Awesome always wanted this so sad don't have another android device but will try this on my Nexus S
Sent from my Nexus S using xda premium
sikagoon7 said:
Is there any way to get this to work with a computer? That would be EPIC!!!
Click to expand...
Click to collapse
only if that computer runs Android and supports wifi direct ^^
How's the testing going for this? I'm shocked more ROM developers don't try to bake this functionality into their releases. My SGSIILTE Skyrocket had Wi-Fi direct baked into the stock Samsung OS, but as soon as you flash to CM10 or something else you lose that function completely and it's no longer in your wireless settings.
I installed your app and will test with my wife's SGSIII tonight.
[ANNOUNCEMENT] To Devs, please read
Hi,
can't download this app, please attach here
cheers
starbase64
starbase64 said:
can't download this app, please attach here
Click to expand...
Click to collapse
are you sure it's compatible with your device?
j4velin said:
are you sure it's compatible with your device?
Click to expand...
Click to collapse
yes, HTC One X
Gesendet von meinem HTC One X mit Tapatalk 2
okay, i attached the latest version. however, i havent set up any filters on the Play Store, so if it doesnt let you download the app, then it's probably incompatible with your device
j4velin said:
okay, i attached the latest version. however, i havent set up any filters on the Play Store, so if it doesnt let you download the app, then it's probably incompatible with your device
Click to expand...
Click to collapse
Thank you so much!!
I own the Nexus 4 and in the playstore I cant download your app (not available in your country -> Germany). Thanks for sharing this, great for exchanging music and videos when hanging out with friends
Not to necro this thread, but we are building an app that does exactly just that. The app is called Drop, and it is a simple, fast, and secure way to share files with people/devices in proximity over WiFi Direct. We are going into a limited Private Beta soon, so if you're up for the challenge, (and running Jelly Bean) then sign up at www.get-drop.com. Seats are limited, and we have a rolling enrollment, so check it out.
Hey,
Why did u take it from the play store.
I really like it. This is what I was looking for. A very simple method to share. No fancy UI or anything. Less then 100KB. Perfect!
Thank you!
I hope u keep maintaining it...:good:
EDIT:
Unfortunately nothing happens from N5 -> N4. I see the toast "sending xyz"... and that's it
(With Stock 4.4)