Related
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them
Hey please experts help me with my galaxy 3 i just bought one i had it 1 day, battery was discharged and after i charged it i got bootloop I tried many roms and i always got : bootloop, boot screen with GT-I5800 or screen Kernel panic upload mode. I cant go into recovery mode i dont know hy it dont works (its vol+,vol -, home, power isnt it?) I cant root it i cant do anything. Anybody have some ideas what to do or its bricked? If its important i can still go into download mode and flash it using Odin thats all i can do with this phone. Pls heeeelp.
P.S.
Its not like that i dont red the forum i sited here many hours and still i didnt find solve of my problem. I guess i am too dummy ;/ I will be graceful sboody ?: (
Here comes help!
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
twinky444 said:
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
Click to expand...
Click to collapse
Thank u very much man phone was used but it had 2.1 stock firmware on it, i didnt wipe/ factory reset on phone, and i didnt't tied sthing else.
Now tell me after flashing Kyrillos' rom v9.0 Do I have flash kernel with CWM or its in Kyrillos already? How to enter CWM recovery mode ? Same as normal (VOL +, VOL-, HOME, then POWER) I did thank u cuz it sounds logical what u wrote thank u man and I am waiting for reply.
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and composite device mode ;/ I dont know what to do.
KamelusPL said:
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and capcitive mode ;/ I dont know what to do.
Click to expand...
Click to collapse
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
MicroGeek said:
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
The problem is that this recovery mode dont works .... :S Look I am serious
xxx.youtube.com/watch?v=lZ5ySu_wZKY
In url change xxx to www i cant post outside links
MicroGeek said:
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
You probably have confused Samsung galaxy 3 with Samsung galaxy S3 because this phone (Galaxy 3) Hasn't menu that you can boot to recovery/bootloader with. At least I dont know about such "menu" thing.
---------- Post added at 03:13 PM ---------- Previous post was at 03:01 PM ----------
----------------------------------------------------------------------- SOLUTION! ---------------------------------------------------------
@KamelusPL: You said that you cant boot after flashing Kyrillo's ROM v9.0. And you had Android 2.1 and you couldn't boot. That means you have been in hurry to get things really fast done and flashed FROYO ROM WITHOUT BOOTLOADERS OVER 2.1 THAT COMES WITH ITS OWN TYPE OF BOOTLOADER = bricked.
HOWEVER, there's a solution! yeah!
This is a bit risky, but if you want your phone working again, you must do that. I'm saying again, I take no responsibility over such things.
1. Put your phone into download mode. This must be working.
2. Download this file: http://hotfile.com/dl/132526357/46bd186/I5800XXJPS_OXX_Android_2.2.rar.html
3. Open odin, tick ONE PACKAGE, in the down right corner click ONE PACKAGE and select .tar file you downloaded. ITS WITH PROPER BOOTLOADERS - FROYO XXJPS. That must work.
4. Click start. NOW DO NOT TOUCH YOUR PC until its done!
5. Wait till its done and wait till your phone boots up.
6. If you will have still bootloop, then you must boot into recovery (YOU MUST WAIT... RECOVERY WONT SHOW IMMEDIATELY just like in download mode... wait man.), here navigate using the same keys I told you before, and select wipe data / factory reset, then select yes and wait till its done. Then, navigate to wipe cache partition, select yes and wait till its done. Then, select reboot system now and press HOME.
7. This should be working!
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
MicroGeek said:
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
Sorry, I mean when booting phone theres no menu like fastboot or something like that because he said he cant boot it anymore.
Sorry, Im now using cyanogenmod 7 so I didn't know that
So I'm sorry
Sent from my GT-I5800 using xda app-developers app
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
KamelusPL said:
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
Click to expand...
Click to collapse
Hold vol up+down and power and home button when the phone is off and let go of the power button once you see something on the screen.
Sent from my GT-I9003 using xda app-developers app
Wait, so when you bought your phone yesterday the battery was discharged? So you didn't check if it was working or not before you bought it? Maybe you were scammed into buying a broken phone
--------------------------------
Click thanks if I helped.
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
twinky444 said:
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
Click to expand...
Click to collapse
U have absolutly right that they to solve this is enter recovery mode but i think my problem is deeper i found something on my own. Look.
If your GSII has the folowing symptoms :
Bootloop
Stuck on GSII logo, but already removed the battery to try to fix it
Enters Download mode and Recovery mode
It means that you are soft bricked and is easy to solve.
But if your symptoms are the mentioned above, PLUS the symptoms below
Enters Download mode but does NOT enter recovery mode (usually means a NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
It looks like I must use all my brain power to solve that i guess i need to go deeper into android stuff cuz i wont give up. I even gave my phone to service but seems like that dude is lame and he is not so much expert like i need i send message to Kyrillos cuz i guess he knows all bout androids and all that stuff and thats the person who i need some1 very good must see my topic guess i will just read learn and w8 for help thank u all for advices
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
martialaw said:
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
Click to expand...
Click to collapse
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Its bad flash that has made the situation...
Flash zero fill.tar which will clean your system
Flash again a rom using 'Forced download mode' ( vol+, home, power button)
Note: you should restart your phone by keys when its still on after zero fill flash using the force download keys.
Sent from my GT-I5800 using xda premium
KamelusPL said:
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Click to expand...
Click to collapse
Sorry, I was just telling from the video. But a software like taskkiller cannot mess up the whole phone in a way that prevents access to recovery.
Try cleaning the ROM like in above post and then flash a bootloaderfree stockrom. That should leave you with a perfect situation to start all over again.
Hi,I don't know if the word "bricked" or "drowned" is the best match for my case,but anyways here is my story:I had installed on my phone the kyrilos rom,I don't remember wich version excactly it has been too long before.My phone fell into a glass of water,I pulled battery out,dried it up with hair styler,after that it had some water marks on the screen and it was working quite good,I re-flashed it abd worked better,the watwr marks on the screen dissappeared and got better...but...my girlfriend reebooted accidently in recovery and it dropped dead,froze,I pulled the battery out,reebooted,and after that I am stuck in phone's logo and it keeps loading nothing ..forever..and I can't even boot to recovery mode..any ideas?I've searched in this blog and I couldn't find anything to do..please help me..
Sent from my GT-S6500 using xda premium
Hey people my first post so you can call me whatever you want
Here is the thing:
I rooted the phone, installed a custom ROM and such, on the process I guess I installed this Clockwork Mod Recovery v5.8.3.1.
Well I wanted to change the ROM so I downloaded the new one (lastest trickdroid) and follow the steps, BUT!, when trying to acces the fastboot thing on that menu that can't remeber the name of, I jsut can't get into it.
When I tart the phone pressing volume down + power, instead of going to that menu it goes to clockwork mod. I was suposed to "Flash the stock boot.img from the ROM with fastboot", but well I dont know what I did or wahtever, I can't aces that menu.
What should I do?
bobyd said:
Hey people my first post so you can call me whatever you want
Here is the thing:
I rooted the phone, installed a custom ROM and such, on the process I guess I installed this Clockwork Mod Recovery v5.8.3.1.
Well I wanted to change the ROM so I downloaded the new one (lastest trickdroid) and follow the steps, BUT!, when trying to acces the fastboot thing on that menu that can't remeber the name of, I jsut can't get into it.
When I tart the phone pressing volume down + power, instead of going to that menu it goes to clockwork mod. I was suposed to "Flash the stock boot.img from the ROM with fastboot", but well I dont know what I did or wahtever, I can't aces that menu.
What should I do?
Click to expand...
Click to collapse
I am having what seems like the same issue with my phone. Just posted a thread not too long ago asking for help. One person (a SR. Member) informed me to try to restore using a NANDROID backup (which I dont have). Going off of his advice, if you have the backup, try that. If not, we both seem to have the same problem. Good luck with your issue, I will be checking both our threads for solutions from now on!
fragkiller1 said:
I am having what seems like the same issue with my phone. Just posted a thread not too long ago asking for help. One person (a SR. Member) informed me to try to restore using a NANDROID backup (which I dont have). Going off of his advice, if you have the backup, try that. If not, we both seem to have the same problem. Good luck with your issue, I will be checking both our threads for solutions from now on!
Click to expand...
Click to collapse
Well, it seems we have the same problem then, we could make a club or something.
Extra Help (Maybe)
Hey again, I found some useful information that allowed me to get into my bootloader! If you are still stuck in CWM, use the volume down button to go down to the "advanced" button at the bottom of the list. Since this is a button that leads to another list and not a direct action, you can hold down the power button when highlighted over it and turn the phone off. From there, just hold Volume Down and Power as you would normally do to boot into the bootloader. Hope this helps since it worked for me!
So:
-Navigate to "advanced" (Just highlight over it)
-Hold power button for 10-15 seconds
-Phone should power off
-Volume Down + Power to boot into Bootloader
-Profit?? (Just Kidding )
Again, hope I could be of some assistance!
fragkiller1 said:
snip!
Click to expand...
Click to collapse
well I dont know what I did. I just turned the phone off normally. Then did the power + b down, held it for about 6 seconds, relesead the power then the volume and BOM, bootlader appeared, hmmm okay I guess
Have a look at fragkiller1 thread for fixing your issue.
well now I can't even get into CWM sigh
A brief flash of a screen appears now while booting it, but it just skips to the actual OS. I have the fast boot disabled ohh man what do now? DId I mess up something?
fragkiller1 said:
Hey again, I found some useful information that allowed me to get into my bootloader! If you are still stuck in CWM, use the volume down button to go down to the "advanced" button at the bottom of the list. Since this is a button that leads to another list and not a direct action, you can hold down the power button when highlighted over it and turn the phone off. From there, just hold Volume Down and Power as you would normally do to boot into the bootloader. Hope this helps since it worked for me!
So:
-Navigate to "advanced" (Just highlight over it)
-Hold power button for 10-15 seconds
-Phone should power off
-Volume Down + Power to boot into Bootloader
-Profit?? (Just Kidding )
Again, hope I could be of some assistance!
Click to expand...
Click to collapse
I did what you told me but when highlighting advanced and pressing the power button it enters the menu advanced, then the phone just noramll reboots and the OS loads.
I would have edited the post but I can't.
bobyd said:
I did what you told me but when highlighting advanced and pressing the power button it enters the menu advanced, then the phone just noramll reboots and the OS loads.
I would have edited the post but I can't.
Click to expand...
Click to collapse
Try holding Vol- when turning it off and keep hold of it but quickly let go of power when it turns off.
Darknites said:
Try holding Vol- when turning it off and keep hold of it but quickly let go of power when it turns off.
Click to expand...
Click to collapse
thanks it worked perfectly. I thought it only worked powering off and turining it on and holding volume down.
edit: sigh now I have another problem, after using fastboot usb with the Boot_Flash_Script from trickdroid, the phone is stuck at the the screen that says"this build is for development pourpuses only..." and it won't go further
edit2: I think I falshed a ROM for VilleC2 when I have a Ville, is there a way to fix this? the phone now is stuck at loading the screen with red words
bobyd said:
thanks it worked perfectly. I thought it only worked powering off and turining it on and holding volume down.
edit: sigh now I have another problem, after using fastboot usb with the Boot_Flash_Script from trickdroid, the phone is stuck at the the screen that says"this build is for development pourpuses only..." and it won't go further
edit2: I think I falshed a ROM for VilleC2 when I have a Ville, is there a way to fix this? the phone now is stuck at loading the screen with red words
Click to expand...
Click to collapse
Ya, make sure you got the right rom and get yourself back into the bootloader and you should see recovery there then do a full wipe and flash the rom and also if you feel you might of flashed the wrong boot.img reflash it to make sure.
So it's over, all solved.
I tried to install a new ROM but CWM got me an error mounting the SD, then I installed another recovery (TWR) and installed the new ROM (viper one s) flashed the boot.img and now everthing works wonders, for now.
Thanks a lot Darknites for trying to help me I really appreaciate that
bobyd said:
So it's over, all solved.
I tried to install a new ROM but CWM got me an error mounting the SD, then I installed another recovery (TWR) and installed the new ROM (viper one s) flashed the boot.img and now everthing works wonders, for now.
Thanks a lot Darknites for trying to help me I really appreaciate that
Click to expand...
Click to collapse
Np dude glad you got it sorted but ya TWRP is way better for the sd mount and if you have 1.09 or lower Hboot it can also flash boot.img.
I got this phone used. (Droid Razr HD) Not sure of its history. As far as I know it was all stock until today.
When I found out I could root and unlock the bootloader I did so. Then I wanted to go into recovery and make a backup (yea I know...did that backwards) I powered the device off...hit the volume rocker switch and the power button at the same time and it entered into the Boot Mode selection menu. I hit the volume down to move to the recovery option and then hit the volume up button to select recovery.
At this point the big red M & Dual Core Technology logo appears. Stays there for 1.5 minutes then disappears briefly, comes back on for 15 seconds and then boots the phone normally.
So....I downloaded and installed Rom Manager and had it flash the latest CMW Recovery, turned the phone off to access the newly flashed recovery and the phone again went to the big red M & Dual Core Technology logo set there for 1.5 minutes, disappeared briefly and then booted the phone normally.
So.....I downloaded the lasted CMW Recovery image and used ADB and Fastboot to flash the recovery. Same result. Cannot access the recovery.
So....I downloaded a Stock recovery image and used ADB and Fastboot to flash the stock recover. Same result....cannot access the recovery.
Can someone tell me what I am missing or what I am doing wrong? Or what I can do access recovery.? A rooted phone with an unlocked bootloader isn't much good if you can't access recovery.
Thanks for reading and for any advice you might be able to give.
Jeff
I believe when in the boot loader menu, you need to Volume down to your choice, then Volume up to select the highlighter choice. Pressing power just resets the phone as you experienced.
ESCollins90 said:
I believe when in the boot loader menu, you need to Volume down to your choice, then Volume up to select the highlighter choice. Pressing power just resets the phone as you experienced.
Click to expand...
Click to collapse
Sorry....my op is wrong and has been corrected. You are right, the volume up selects the highlighted choice. Which is the way I was doing it, I just described it wrong.
And my problem still exists, I can't access recovery. Thanks for your reply.
jlstark1 said:
Sorry....my op is wrong and has been corrected. You are right, the volume up selects the highlighted choice. Which is the way I was doing it, I just described it wrong.
And my problem still exists, I can't access recovery. Thanks for your reply.
Click to expand...
Click to collapse
If you haven't tried it already, since you seem to have ADB setup and working, try to use "adb reboot recovery" and see if you have change in luck. If not, my knowledge does not go much further, I hope someone knows how to answer this for you. I can imagine how distraught I'd be.
The only other thing is to ensure you've installed the correct recovery:
Google Dhacker29 and choose the AndroidHosting site, choose msm8960.
(I can't post url's because i've had less than 10 posts... spam thing)
Since you seem to have unlocked bootloader with the most recent case of KitKat make sure you have the "TWRP2710-RAZR-HD_M-KITKAT.img" file.
I will say I didn't use ADB to push mine, I'm not home often, I used Flashify from the Google Play Store. I had no problem with this method.
Hope you can figure it out! Good luck!
ESCollins90 said:
Since you seem to have unlocked bootloader with the most recent case of KitKat make sure you have the "TWRP2710-RAZR-HD_M-KITKAT.img" file.
I will say I didn't use ADB to push mine, I'm not home often, I used Flashify from the Google Play Store. I had no problem with this method.
Click to expand...
Click to collapse
Thanks!! Your 2 suggestions made the difference. Works like a charm!
jlstark1 said:
Thanks!! Your 2 suggestions made the difference. Works like a charm!
Click to expand...
Click to collapse
Awesome! Enjoy your new phone!![emoji1]
Hi Guys,
So the story is that I was updating my Xperia Z3 (details below) from TWRP 2.8.6 to 'twrp-3.0.2-0-yuga' using the instructions androidnewsbox.com/2016/02/08/how-to-install-and-update-to-twrp-3-0-0 and after flashing the new TWRP the phone can no longer enter recovery mode and I get no other booting/loading screens.
I had 100% battery when I started the process.
It does still do the little vibrate thing when I hold down the power button but nothing happens after that.
When I plug it into the PC the LED flashes red, then green then goes off.
Reading the instructions twrp.me/devices/sonyxperiaz.html I did use the 'install' function not the 'recovery' function. Is that likely to be the mistake I made? If so is there any way to recover?
Any and all help will be greatly appreciated.
Model: D6653
Previous TWRP: 2.8.6
Android version: 5.0.2
Software version: 23.1.A.0.726
Use flashtool to reflash a new system image (ftf). You're using stock so probably your kernel doesn't support FOTA-Kernel partition flashing.
Great to hear back from someone.
Unfortunately I don't think that I can just flash a new ftf using flashtool as I cant get into fastboot mode.
I have been working through the following online tutorial
engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
I have installed the USB drivers on my PC from here
androidmtk.com/download-sony-xperia-usb-driver
And i can get the ftf file from here (mine is 1288-6090)
xpericheck.com/device/D6653
Unfortunately I am unable to put the phone into fastboot mode by holding down the power and down buttons. Nothing happens.
The tutorial above also tells me "If phone not going to Fastboot mode than connect it to PC by USB. Hold Volume Up and Power button until you get company logo or backlight."
This also does nothing and I get no backlight or company logo.
FYI if it helps about a year ago I rooted my phone using a tutorial very similar to this
oneandroid.gs/root-xperia-z3/
I will keep working on the problem and post any updates as they come up.
h3llcat said:
Great to hear back from someone.
Unfortunately I don't think that I can just flash a new ftf using flashtool as I cant get into fastboot mode.
I have been working through the following online tutorial
engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
I have installed the USB drivers on my PC from here
androidmtk.com/download-sony-xperia-usb-driver
And i can get the ftf file from here (mine is 1288-6090)
xpericheck.com/device/D6653
Unfortunately I am unable to put the phone into fastboot mode by holding down the power and down buttons. Nothing happens.
The tutorial above also tells me "If phone not going to Fastboot mode than connect it to PC by USB. Hold Volume Up and Power button until you get company logo or backlight."
This also does nothing and I get no backlight or company logo.
FYI if it helps about a year ago I rooted my phone using a tutorial very similar to this
oneandroid.gs/root-xperia-z3/
I will keep working on the problem and post any updates as they come up.
Click to expand...
Click to collapse
First hard shut down your phone by using combo, after that, download the ftf for your phone (1288-6090 is the customization, what you need is an ftf that its compatible with your phone model, download flash tools, install the drivers that come with it, and using xperifirm (Included in flashtools) you download the firmware) After you have all settled up, proceed to flash your phone, select firmware and then it'll ask you to connect your phone in flash mode not fastboot mode, you can do that by pressing vol up + power (press them and while pressing them connect the usb to the pc). Then the flashing process will start. You can find many tutorials around here in xda. Do not use external tutorials, go find stuff here. It's way more reliable as many are made just for your phone.
Hi and thanks again.
This gives me plenty to learn about and go forward with thanks heaps.
I will give this process a go later today but I have a few questions if you dont mind.
hard shut down your phone by using combo
Click to expand...
Click to collapse
I am not familiar with any combo and without visual ques from the screen or LED I cant tell if it is off. I have a button that says 'off' near the sim card is that sufficient?
connect your phone in flash mode not fastboot mode, you can do that by pressing vol up + power
Click to expand...
Click to collapse
Do I need to continue to hold down the buttons during the flashing process?
You can find many tutorials around here in xda
Click to expand...
Click to collapse
I do feel a little out of my depth here and am a bit confused about what to even search for to find a tutorial on what you are suggesting. If you can point me to an example tutorial that would be fantastic.
h3llcat said:
I am not familiar with any combo and without visual ques from the screen or LED I cant tell if it is off. I have a button that says 'off' near the sim card is that sufficient?
Click to expand...
Click to collapse
Yes that one, If you press it enough (about 5-10 secs) the phone will shutdown and It wont try to restart. This is what you need first.
h3llcat said:
Do I need to continue to hold down the buttons during the flashing process?
Click to expand...
Click to collapse
No, only when connecting the phone to start flashing the system software, you will see a green light in the notification led that will then shut off and flashing process will start.
h3llcat said:
I do feel a little out of my depth here and am a bit confused about what to even search for to find a tutorial on what you are suggesting. If you can point me to an example tutorial that would be fantastic.
Click to expand...
Click to collapse
This is a great almost-up-to-date guide http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
XperiFirm is included in flashtools now so you don't have to download it, but to get your firmware you have to do the same steps but opening xperifirm from inside flashtool.
You can download flashtool here http://www.flashtool.net/downloads.php
Seems to be a success!
Thanks heaps for all your great assistance.
Did you get the Z3 D6653 going again?
Hi H3llcat,
Jumping through some hoops with the D6653 myself... did you get it to boot up? Not sure how far you went with it, if still an issue charge it back up and let's try a couple of things; I realize it'll just be sitting there all dumb and dark like, but do it anyway. So let us know.
h3llcat said:
Hi Guys,
So the story is that I was updating my Xperia Z3 (details below) from TWRP 2.8.6 to 'twrp-3.0.2-0-yuga' using the instructions androidnewsbox.com/2016/02/08/how-to-install-and-update-to-twrp-3-0-0 and after flashing the new TWRP the phone can no longer enter recovery mode and I get no other booting/loading screens.
I had 100% battery when I started the process.
It does still do the little vibrate thing when I hold down the power button but nothing happens after that.
When I plug it into the PC the LED flashes red, then green then goes off.
Reading the instructions twrp.me/devices/sonyxperiaz.html I did use the 'install' function not the 'recovery' function. Is that likely to be the mistake I made? If so is there any way to recover?
Any and all help will be greatly appreciated.
Model: D6653
Previous TWRP: 2.8.6
Android version: 5.0.2
Software version: 23.1.A.0.726
Click to expand...
Click to collapse
Not sure if this is worth mentioning but this thread is 2 years old.
Yes I did get everything working, xkeita was a great help and the guide he sent me was useful.
Have you got issues yourself?