Could someone please deodex the i497 4.1.2 firmware because i cannot seem to accomplish it without causing a bootloop.
Edit: I figured it out thanks to @focussoft and his help.
Im on it too
Only hickup I have so far is that the radio does not work after flashing
Seems no one feels like helping me to figure that one out
The rest works fine
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
---------- Post added at 10:20 AM ---------- Previous post was at 10:09 AM ----------
There is a 4.0.4 deodexed but no 4.1.2
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
The rest works fine can you send me a nandroid of your os? im assuming its data right not wifi? i got this as a gift and dont have a data plan so i can use wifi but it would be much appreciated if i could get that image would be much appreciated because i cannot seem to deodex. or could you tell me how you deodexed it
I use the Android kitchen but its little bit hard to set up
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
About to try that now what image did you use as the base image?
I pulled it off my tablet
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
ok cool new to rom developement and have been trying to figure this tablet out to deodex it so i can make it look like the xperia tab z
You have to take to mount points out of recovery.fstab otherwise it does not flash
Im new to this too but have most of it figured out last week except the missing radio part
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
i think the radio issue is due to the att modem which was an issue with the 4.04 version maybe you could check the posts about that out it may help but thanks for all the help us new devs need to help eachother out especially cuz there are no devs really for this tab
I'm in the process of fixing my linux but I just came out of the ER so have to take it slow
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
well if i get it working ill let you know and tell you how i did it or maybe post a deodexed rom for this in the dev thread as a base rom.
Sounds great
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
yo how did you set up the device to set up the updater script and such?
I made a espresso10att file with the mounth pounts
The wierd thing is now I reinstalled linux , yhe kitchen ignores the file and writes a wrong udater
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
did you have to do anything special to get the framework files to be deodexed properly because every time i copy them i get a bootloop, but the apk files work perfectly
Ineeded to update the smali files and tell the kitchen to use that version
Also needed to change api level to 15 in the api_level file
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
focussoft said:
Ineeded touodte the smli files
Click to expand...
Click to collapse
?? also what is the mount point i tried using the one from the s4 but it didnt work?
cool will do that. also what is the mount point i tried using the one from the s4 but it didnt work?
Noooo u need to pull the mountibg points from the extracted boot-image
Kitchen can decompile that and then u can find the mount points in the /etc/recovery.fstab
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
focussoft said:
Noooo u need to pull the mountibg points from the extracted boot-image
Kitchen can decompile that and then u can find the mount points in the /etc/recovery.fstab
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
cool like i said im new to development so i apologize for all the questions because i cant seem to find the answers anywhere so thanks for putting up with me
Related
http://www.xda-developers.com/android/samsung-s-voice-ripped-for-the-world-to-enjoy/so i tried this s voice with ics works great but i am curious if there is anyway to get this app to work on gb? maybe change the scripts decompile the apk i am unsure but i am sure there has to be a way to get it done..
http://forum.xda-developers.com/showpost.php?p=26370226&postcount=74
You will need this modifed version as they shut it down if you are not using a supported device. This version by passes the device lookup making it think you are using the correct phone. I havnt tested just passing along what i found.
Sent from my PG06100 using Tapatalk 2
yeah from what i understand you need to edit the build prop to the gs3 so it thinks you are running a gs3
The link i posted does the bypass in smali, as modifiy your build.prop is not good and a very dirty way to hack to get it to work.
Sent from my PG06100 using Tapatalk 2
cool haven't looked at it yet on my phone
When I try to install it it says "problem parsing" and its not a bad download because I have redownloaded 4 times
Sent from my PG06100 using Tapatalk 2
i have found that you need to be on ics i thought about decompiling and trying to make it work on gb here is the recently changed build prob app that someone signed
https://docs.google.com/file/d/0B3dAMHacbZmtdDMyZ0hSdWJKQ00/view?sle=true#
Anyone point me in the right direction is it the build.prop?? Or just not possible?
Sent from my PG06100 using Xparent ICS Blue Tapatalk 2
I have searched xda over and cannot find where to download a couple of apk files. I've seen people mention them in places but no where to download. So I have an idea floating around in my head and need two apks to see if I can make it work... needed are...
1. Stock touchwiz apk for android 2.3.5 that was on the skyrocket out of the box.
2. Gallery3d apk that also came stock on the 2.3.5 out of the box.
If anyone has these or knows where I can download them from either upload or send me a link.
If I can get my idea to work I will then post it and give some kudos to whoever helps with these files...
Sent from my SAMSUNG-SGH-I727 using xda premium
garydv2002 said:
I have searched xda over and cannot find where to download a couple of apk files. I've seen people mention them in places but no where to download. So I have an idea floating around in my head and need two apks to see if I can make it work... needed are...
1. Stock touchwiz apk for android 2.3.5 that was on the skyrocket out of the box.
2. Gallery3d apk that also came stock on the 2.3.5 out of the box.
If anyone has these or knows where I can download them from either upload or send me a link.
If I can get my idea to work I will then post it and give some kudos to whoever helps with these files...
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I'll see if I can dig them out
---------- Post added at 01:32 AM ---------- Previous post was at 01:24 AM ----------
Here they are, also included the odex. I have no idea what yo are up to??
http://d-h.st/JJP
xcrazydx said:
I'll see if I can dig them out
---------- Post added at 01:32 AM ---------- Previous post was at 01:24 AM ----------
Here they are, also included the odex. I have no idea what yo are up to??
http://d-h.st/JJP
Click to expand...
Click to collapse
if it works i promise ill tell if it dont ill never say lol...
garydv2002 said:
if it works i promise ill tell if it dont ill never say lol...
Click to expand...
Click to collapse
Haha, good luck!
what im trying to do id get the issue with the wallpaper resizing fixed for those who dont want to install a custom rom. my idea is it worked fine on 2.3.5 so i just have to figure out what the difference is in the code and whether its a gallary problem or a touchwiz problem or a little of both. ive tried every launcher on the market so im hoping the problem is the gallary and i can take the apk from 2.3.5 and drop it in the system app root folder and it work. if that dont work ill have to start looking into the code and see if there is a difference. its all wrote in java so i know java from my computer programing days... but there has got to be a way to make it work....
garydv2002 said:
what im trying to do id get the issue with the wallpaper resizing fixed for those who dont want to install a custom rom. my idea is it worked fine on 2.3.5 so i just have to figure out what the difference is in the code and whether its a gallary problem or a touchwiz problem or a little of both. ive tried every launcher on the market so im hoping the problem is the gallary and i can take the apk from 2.3.5 and drop it in the system app root folder and it work. if that dont work ill have to start looking into the code and see if there is a difference. its all wrote in java so i know java from my computer programing days... but there has got to be a way to make it work....
Click to expand...
Click to collapse
Those apk's are stock, not deodexed. So if you are planning on dropping them in a custom rom, I think you will have to deodex them. Or I can upload the deodexed versions if you need them.
xcrazydx said:
Those apk's are stock, not deodexed. So if you are planning on dropping them in a custom rom, I think you will have to deodex them. Or I can upload the deodexed versions if you need them.
Click to expand...
Click to collapse
I'm running ucle2 and can't resize wallpaper other than cwm recovery and rooted and debloated I am stock. So do you think they need to be deodexed for stock ucle2? I'm not installing the touchwiz as a matter of fact I hope I don't need it but if I do it will just be to look at the code and see how it differs from ucle2 touchwiz if any at all. I'm hoping I can drop the apk and odex file in the root system app folder replacing the ucle2 with the 2.3.5 gallery and I'm hoping it run it and I can once again resize wallpaper and have ucle2. I like to have my cake and eat it too...
Sent from my SAMSUNG-SGH-I727 using xda premium
garydv2002 said:
I'm running ucle2 and can't resize wallpaper other than cwm recovery and rooted and debloated I am stock. So do you think they need to be deodexed for stock ucle2? I'm not installing the touchwiz as a matter of fact I hope I don't need it but if I do it will just be to look at the code and see how it differs from ucle2 touchwiz if any at all. I'm hoping I can drop the apk and odex file in the root system app folder replacing the ucle2 with the 2.3.5 gallery and I'm hoping it run it and I can once again resize wallpaper and have ucle2. I like to have my cake and eat it too...
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
no, if you're stock you don't want deodex, so you're good. No idea if it will work, though. Lol
I'm guessing there's more to it than just switching out a couple apk's. I dunno
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
no, if you're stock you don't want deodex, so you're good. No idea if it will work, though. Lol
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm not gonna work on it anymore tonight but I'm gonna give it a shot tommorow and if I can get it working I'll post whatever I had to do to get it working... thanks for the files...
Sent from my SAMSUNG-SGH-I727 using xda premium
Are you doing anything like DAGr8 did in this thread for 2.3.6?
http://forum.xda-developers.com/showthread.php?t=1558304
Uncle Irish said:
Are you doing anything like DAGr8 did in this thread for 2.3.6?
http://forum.xda-developers.com/showthread.php?t=1558304
Click to expand...
Click to collapse
Kinda yea. Didn't know there was a forum for it already. My hope is that it will work without any changing code you know keep it simple until simple don't work... I noticed last night that both 2.3.5 and ucle2 both use the same touchwiz30 so maybe I'll get away with simple....
Sent from my SAMSUNG-SGH-I727 using xda premium
Well of course simple hasn't worked so now I'm about to check code.. oh what fun. When I drop the 2.3.5 apk in the system app folder it opens for a short few seconds and force closes. I've tried fix permissions and of course wiped cache and dalvick cache so its close to working but close just isn't good enough... but I have not gave up yet. Any ideas would be greatly appreciated....
Sent from my SAMSUNG-SGH-I727 using xda premium
Well finally got it working.. here is the link to the post and details..
Give thanks to xcraxydx for providing the apk files..
http://forum.xda-developers.com/showthread.php?p=26524608
Sent from my SAMSUNG-SGH-I727 using xda premium
I need help from some of you 8000 developers.
Im trying to deodex and zipalign a stock rom for my 8013 in dsixda kitchen.
Im able to deodex and make a rom. i zipalign and convert updater script to edify and sign it.
But it fails from error 0 everytime
Sent from my GT-N7000 using Tapatalk 2
Oh man I am like 1-2 days out for my N8013 and will be all over helping out.
Launched from Hot Rod running AOKP JB!!
Sweet ya i got dsixda kitchen working properly and im able to deodex and zipalign and then sign but i get error 0 no matter what i try. .. According to cwm thats related to updater script... I tried the older script version and edify and verified no errors and no go on flashing... Maybe something in the script isnt right for samsung. .. Ie. That kitchen is mainly for htc. .
Id love to put a rom together with you. Your theming is nice on my a500
Also figured id ask the n8000 guys what they are cooking roms with since im having errors
Sent from my GT-N7000 using Tapatalk 2
I would assume that the 8000 and 8013 have the same partitions as far as boot,system and most all that. I would verify the script that the kitchen is making with a know good script for a N8000 ROM. Verify mount points and all that jazz. Would bet there is an error on how the kitchen in building the updater-script.
Launched from Hot Rod running AOKP JB!!
Thanks for the heads up. Dont have wifi in my new place till tomorrow, trying to dl a 700mb rom over hotspot sucks when im being throttled. .. Will try to compare tonight at my moms. .
Sent from my GT-N7000 using Tapatalk 2
dsixda doesn't recognize the N80xx... I can't remember if it has I9300 support, but you need to place the model number as an empty file in one of the directories (forget which one...)
For example, look for GT-I9100... The same directory MIGHT work for N80xx/I9300 as I think the kernel and system partitions are the same, but not sure.
Ya i compared a script from an n8000 rom and the kitchen one was way off....
Sent from my GT-N8013 using Tapatalk 2
DJsCrIBbLe said:
Ya i compared a script from an n8000 rom and the kitchen one was way off....
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
I think that unless it properly "recognizes" a devices from one of its supported categories, it defaults to assuming an original GalaxyS device...
Moved To Q&A
Please dont post questions in the dev section
How is it a question. its a dev wip for 8013 thread. ..
Sent from my GT-N7000 using Tapatalk 2
Did you ever figure out how to get the mount points correct? If so, did you correctly get edify_defs set up or manually edit the update script?
I just got this phone yesterday to discover that the stock rom (rooted) doesn't have the red line show up under a misspelled word. I had this on my evo 4g running cm9 or 10.
Does anyone know of a rom, or roms, that would have this feature.
Sent from my SCH-I535 using Tapatalk 2
Or would anyone know of a way to add this feature to the stock ics rom?
Thanks,
Sent from my SCH-I535 using Tapatalk 2
bluezr1 said:
Or would anyone know of a way to add this feature to the stock ics rom?
Thanks,
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
never really paid attention to this.
id think this might be a keyboard feature more than a rom feature, no?
ddurandSGS3 said:
never really paid attention to this.
id think this might be a keyboard feature more than a rom feature, no?
Click to expand...
Click to collapse
I installed LantinIME.apk from a rom I extracted for the evo. The keyboard worked but still no spell checker. Did you happen to notice if any of the roms you've flashed had this feature, preferably an ICS rom?
Sent from my SCH-I535 using Tapatalk 2
I also think this is a keyboard feature. Try installing one of the different keyboards from the play store.
I'm using swift 3, no red lines on touchwiz, however my galaxy player 5.0 running cm9 w/swift 3 has it (did not on touchwiz). I assume this is a rom feature.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
I have been trying to ilfigure this out for a while. I haven't been able to get it to work with any of the roms. Someone said CM10 might do it but haven't tried.
Edit:
This is a better start: http://forum.xda-developers.com/showthread.php?t=1832126 the changes could be diffed from the stock rom
OR
Some info behind it: http://forum.xda-developers.com/showthread.php?t=1641988&page=2
con247 said:
Edit:
This is a better start: http://forum.xda-developers.com/showthread.php?t=1832126 the changes could be diffed from the stock rom
OR
Some info behind it: http://forum.xda-developers.com/showthread.php?t=1641988&page=2
Click to expand...
Click to collapse
Would you happen to know if that would work with the stock rom (rooted) for Verizon?
I just got the phone and even though I've been doing a ton of reading, I'm still a noob when it comes to the s3. And the last thing I want to do is mess anything up. Atlest with the evo 4g I didn't have to worry about different carriers and what not.
Thanks,
Sent from my SCH-I535 using Tapatalk 2
The changes made should work. So basically if you compared the changes of this to their stock rom here: http://forum.xda-developers.com/showthread.php?t=1825272 and then applied the same changes to our stock rom, it would work. BUT their files as is will not work.
Basically, it would probably take about 15 minutes for someone to do if they knew what they were doing. I however don't have 15 minutes to spend on this so I can't help right now lol.
con247 said:
The changes made should work. So basically if you compared the changes of this to their stock rom here: http://forum.xda-developers.com/showthread.php?t=1825272 and then applied the same changes to our stock rom, it would work. BUT their files as is will not work.
Basically, it would probably take about 15 minutes for someone to do if they knew what they were doing. I however don't have 15 minutes to spend on this so I can't help right now lol.
Click to expand...
Click to collapse
That's ok, as long as I know that it'll work. When I get to my PC I'll look it over and hopefully not break anything. Lol
Thanks bud,
Sent from my SCH-I535 using Tapatalk 2
so what I would do is download their stock deodex and extract the files that are included in the mod.
Then, decompile the .jars and apks that were modded and the stock version
Run winmerge on them to see exactly what they changed
Then make those exact changes to our stock deodex rom. So you will need to decompile 3 sets of files and recompile 1 set.
con247 said:
so what I would do is download their stock deodex and extract the files that are included in the mod.
Then, decompile the .jars and apks that were modded and the stock version
Run winmerge on them to see exactly what they changed
Then make those exact changes to our stock deodex rom. So you will need to decompile 3 sets of files and recompile 1 set.
Click to expand...
Click to collapse
Any luck on getting this to work?
bishop0114 said:
Any luck on getting this to work?
Click to expand...
Click to collapse
Not here, it's a little beyond my knowledge. I did learn some, just not enough to get it working.
Sent from my SCH-I535 using Tapatalk 2
I would love to get this working on my phone!!!
Unlocked just to piss off Verizon!
I know that it's possible, because maanz got it working on his rom.
http://forum.xda-developers.com/showthread.php?t=1854608
Sent from my SCH-I535 using Tapatalk 2
con247 said:
so what I would do is download their stock deodex and extract the files that are included in the mod.
Then, decompile the .jars and apks that were modded and the stock version
Run winmerge on them to see exactly what they changed
Then make those exact changes to our stock deodex rom. So you will need to decompile 3 sets of files and recompile 1 set.
Click to expand...
Click to collapse
I got apktool installed and decompiled framework.jar where it creates a folder called smali. The problem is, I can't view any of the contents from within it. If I go to properties it states contents "nothing" yet shows free space as being 66.7 GB. So I know that there's something in there, I'm just not allowed to view the contents. I read somewhere that you need a text editor?
I did all this on a Linux machine (Mint 13.) I'm gonna try it on a windows PC next just to see what happens.
Edit: I found out that by changing .jar to .apk and then decompiling it allowed me to view the contents. Now I'm sitting at trying to open the TextView.smali. lol
Edit 2: for some reason it's not working for the JellyWiz rom. It's still not showing the contents from within the samli folder.
Sent from my SCH-I535 using Tapatalk 2
To the original poster I know this is off topic but what method of root did you use.
Thanks
Sent from my SCH-I535 using xda app-developers app
dfoote626 said:
To the original poster I know this is off topic but what method of root did you use.
Thanks
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Ez root I believe its called.
Sent from my SCH-I535 using Tapatalk 2
bluezr1 said:
Ez root I believe its called.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I will look it up on YouTube....
Sent from my SCH-I535 using xda app-developers app
Hey everyone, just thought I'd give a little short intro about myself before i get to the point so no one bombs me for being a noob or anything. I've been around since the DroidX days so I'd say I'm pretty experienced when it comes to rooting and hacking and roms and all. I have done some tweaks back in the day with the Droid Bionic mostly so I know my way around that. Now, in the Android Development section PureMotive started a thread on how to port roms and I thought I'd give it a try. I've been wanting to develop something at least for a long time now and I thought i'd start by porting something. So getting to the point now
I have selected a rom from the AT&T side. It is a TW JB rom. I have made sure i followed his directions to the t. Now about the rom, It succesfully boots and everything is working...except it won't recognize the sim card. It's live on the Verizon Network, however, my number doesnt show up and there is no data. I was wondering if anyone would like to help me out with this.
Thanks so much everyone and I look forward to releasing something in the near future!
if you experience no signal, data, etc - open framework-res.apk from the ROM you want to port (ex. At&t rom) in 7zip and locate eri.xml and delete it. Then open framework-res.apk from the base ROM (ex. Verizon rom) and take eri.xml from that ROM and put it in the framework-res.apk of the ROM you want to port.
Sent from my SCH-I535 using xda app-developers app
Yeah I did that and it still doesn't work
Sent from my SCH-I535 using Tapatalk 2
Have you tried going through the build prop file and making sure that everything says Verizon in it instead of at&t?
Sent from my SCH-I535 using Tapatalk 2
joka10 said:
Have you tried going through the build prop file and making sure that everything says Verizon in it instead of at&t?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That shouldnt be a big issue wit data because I changed my build prop to sprin to use g wallet and I don't have an data issues
Sent from my SCH-I535 using xda premium
I would PM PM
Sent from my SCH-I535 using Tapatalk 2
1ManWolfePack said:
I would PM PM
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Hahaha
Yeah I did do the necessary build prop changes and apn switches. And I am talking to PM, lol that was funny btw. Good one
Sent from my SCH-I535 using Tapatalk 2