Related
¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
duendeskt said:
¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
Click to expand...
Click to collapse
Yes, I rooted my Teclast A11 4.1.1 tablet using the files and methods in this post:
Edit: As a new user I can't seem to post links.
I'll write it out instead.
blog dot sina dot com dot cn slash s slash blog_899fd55d01017nsb.html
Note: The site is in Chinese but google translate worked for me!
The root process was easy - the hard part was finding USB-drivers that worked with the tablet. After browsing through countless Chineese forums I got the advice to install an application called Moborobo. The software itself is quite buggy but the USB-drivers seems to work well.
On a different note - my A11 has a very annoying problem. The numbers in it's MAC address are separated by periods instead of colons. Is that the case with your tablet as well?
This makes the tablet unusable for some applications (i.e. Sonos Controller).
Good luck with your rooting!
Edit 2013-01-04: The latest update fixed my problem with the MAC address. You can get it here: http pan dot baidu dot com / share / link?shareid=147758&uk=489415757&third=0
How to get screen off during hdmi out?
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Alfred271 said:
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Click to expand...
Click to collapse
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Verified successfully rooted teclast A11 dual core.
n'Anders said:
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Click to expand...
Click to collapse
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
moborobo has no drivers/ not compatible
Alfred271 said:
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
Click to expand...
Click to collapse
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Worked for me
ghostworm said:
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Click to expand...
Click to collapse
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
n'Anders said:
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
Click to expand...
Click to collapse
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast over wifi only but it still does not reconize the teclast as teclast a11 over usb, and after Moborobo try to connect, it wants to install drivers but it always stucks at 99% of driver installation. Never installed any driver...
i have win8 pro 64bit
Moboro
ghostworm said:
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast but it still does not reconize the teclast as teclast a11, and after Moborobo try to connect, it wants to install MoboMarket but it was always denied by the teclast itself, even when i download it manually and try to install.
BTW is it really necessery to install MoboMarket just to root the device???
Click to expand...
Click to collapse
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
n'Anders said:
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
Click to expand...
Click to collapse
Ok problem solved
the main problem was Windows 8 !!!!!
I tried it on Windows 7 PC and everything worked well, thank you very much...
:good:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
ghostworm said:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
Click to expand...
Click to collapse
That's unlikely to work as the tablets doesn't share chipset or GPU.
Identify tablet
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
atakatas said:
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
Click to expand...
Click to collapse
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
n'Anders said:
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
Click to expand...
Click to collapse
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
atakatas said:
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
Click to expand...
Click to collapse
I have read about people that was able to restore their seemingly dead tablets through the Rockchip batch tool but I have (luckily) no experience in that department...
Thank you for your advices.
I think, "Rockchip batch tool" is the best starting point in my case. I found some tutorials on firmware update in other forums, I'll try them later. For now, I can go with it unrooted.
ROM
Hi,
Would any one recommend a good Custom ROM for my Teclast A11? I run on the stock ROM which worked fine till Sunday after which it crashed and i updated with a firmware which is not stable either.
Regards
hello guys, i downloaded the original firmware from:
http://www.teclast.com/tools/pad/putcode.html
just write down your id, it is back on the case.
How to Root and avoid bricking
For those that have an Teclast A11 Dual Core and Quad Core M5A7 I've pass my two last days to make experiments.
I've landed in a Root procedure easy to use, and I have discover how to Unbrick in case of failure of Root.
I'll hope you apreciate the guides. It's took a lot of time to write down them all.
How to Root Teclast A11 Dual Core and Quad Core with Android 4.1.1
How to Unbrick Teclast A11 Quad Core M5A7
How to Update firmware to Android 4.2.2
Sorry for my English, I'm Italian.
Have a nice day.
Dear Xda,
Im An Oppo user my Device details As follows.
Device: Oppo F3 ( CPH1609)
MTK6750T
4Gb Ram, 64 GB ROM
Running on ColorOs 3.0.0i (Based on Android 6.0)
There are lot of problems / bugs in Os which Oppo Even failed to rectify.
When ever i Mailed them they simply quoting their common quotes
So i decided to Root my phone to develop ( no i cant do it lone )
During search of Root i found few obstacles
1) Oppo made decision to remove fastboot option fron their device
Ref: https://forum.xda-developers.com/r7-plus/help/decision-oppo-bootloader-fastboot-t3348114
2) MTK droid Tools not fully supporting the chipset
Ref:https://forum.xda-developers.com/attachment.php?attachmentid=4178413&thumb=1&d=1497202499
3) One click Root is not working ( king, farma etc)
4) cannot obtain boot & Recovery imgs to development
5) i thought stock firmware flash file may have useful but there are 2 types of probles
(A) flashablezip version : it has boot. Img but no recovery.img included. Also it is With. Ozip Not with. Zip extension
(B) PC version : it is like encrypted file. With. Ofp extension And With some other type file. And it is not flashing through SP-FLASH TOOLS. The flashing tool is different.
Ref https://m.youtube.com/watch?v=qw4HIQER0mg
Guys thease are my problems. Coz of those i failed to root my device.
My only Hope is Xda, you people know better than me ( probably Best) . Please analyze and and give suggestions.
Thanks In Advance
Please link for ZTE K3DX-V5G firmware.
ZTE K3DX-V5G firmware
Why do you need ZTE K3DX-V5G firmware?
Is there something wrong with your device?
Do you recommend buying the ZTE K3DX-V5G?
The brand name is V5 or ZTE or Guan or Mango.
It is the same device, manufatured by V5 and sold by ZTE, Guan and Mango.
Guan K3DX-V5G
https://deviceatlas.com/device-data/devices/guan/k3dx-v5g/28213760
BangGearWatch | ZTE V5G-K3DX
https://www.banggearwatch.com/pricetracker/zte-v5g-k3dx-5-5-inch-3gb-1369255/
The price was €64 at BangGood, for a short time.
The price was €70 at MyeFOX.
V5 K3DX-V5G 3GB RAM 32GB ROM Qualcomm Snapdragon 617 1.5GHz Octa Core FHD Display 5.5 inches Android 5.1 4G LTE Smartphone
https://www.myefox.fr/telephones/v5...a-core-fhd-ecran-55-pouces-android-5-g-223880
K3DX-V5G supports naked-eye 3D and eye-tracking.
It has a K3DX display with column interlaced mode.
Therefore is fully compatible with PhereoRol3D app.
https://github.com/JackDesBwa/PhereoRoll3D
Get the latest release here
https://github.com/JackDesBwa/PhereoRoll3D/releases
Have you tried PhereoRol3D ?
BootStomp and DR.CHECKER
Your phone has a locked bootloader.
You need to run these two tools: DR.CHECKER and BootStomp.
DR.CHECKER : A Soundy Vulnerability Detection Tool for Linux Kernel Drivers.
It is a single script!
This repo contains all the sources, including setup scripts. Now with an Amazing UI to view the warnings along with corresponding source files.
https://github.com/ucsb-seclab/dr_checker
BootStomp
https://seclab.cs.ucsb.edu/academic/publishing/#bootstomp-security-bootloaders-mobile-devices-2017
Did you manage to root ZTE K3DX-V5G ?
Partitions table
Get an excellent partitions table of ZTE K3DX-V5G
This format is ideal for recovery.
Device Info HW
https://play.google.com/store/apps/details?id=ru.andr7e.deviceinfohw&hl=en_US
NOTE - Find attached the partitions table of SuperD D1 (SuperD C1001). It is another device with Naked-eye 3D and eye-tracking.
Do you own a ZTE K3DX-V5G ?
You do not own a ZTE K3DX-V5G, do you?
V5 K3DX V5G Smartphone Unboxing (3D Video Camera)
https://www.youtube.com/watch?v=KkQhQszdSYs
Mango K3DX-V5G
https://v.youku.com/v_show/id_XMjgxMDI4OTcyOA==.html
3D Dongdong APP: Over 10,000 3D movies provided
http://en.k3dx.com/prolist/7/17.html
Thank you for many information about it.
I did not own it now due to it heat up too much compare with SD 625 / 636 phone.
Discussion V5 K3DX-V5G at russian 4pda forum
Discussion V5 K3DX-V5G
http://4pda.ru/forum/index.php?showtopic=944204
There is new firmware available from chinese versions (latest 1.3)
Firmware in China
http://www.shuajibao.com/rom/Zte/23777
Version 1.3 is not official. It is a custom ROM by this russian guy... Sidorovvitalik.
But development has already stopped because he is selling his ZTE V5 K3DX-V5G.
K3DX V5G stockrom
Please can someone upload the stockrom.
After scouring the internet for hours, I stumbled upon this post:
https://4pda.ru/forum/index.php?showtopic=944204&st=220
And guess what, I found the firmware for the device! Eventually, I was able to fix my bricked K3DX V5G, and here it is:
https://yadi.sk/d/TSjrTYbKBV4KWA
What I did was:
1. Decompressing the file
2. Flashing it with fastboot
3. Device resurrected!
Fastboot commands:
Code:
fastboot flash:raw boot boot.img
fastboot flash system system.img
edit: found out that it is a clone of ZTE v5 pro N940SC
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
asce16 said:
Ma'am/Sir. Can i ask what usb driver did you use to detect your k3dx-v5g? Because mine is not detecting. Thanks in advance.
Click to expand...
Click to collapse
Are you on Linux or Windows?
Ma'am/Sir. What usb driver did you use to detect your k3dx v5g phone? I cant find compatible to mine, my pc cant detect my k3dx v5g phone. Plsss. Send link. Thanks in advance.
B83C said:
Are you on Linux or Windows?
Click to expand...
Click to collapse
Window.
B83C said:
Are you on Linux or Windows?
Click to expand...
Click to collapse
Also ma'am/sir. can i ask a little favor? Can you send me full guide how to flash this file. Plssss
asce16 said:
Also ma'am/sir. can i ask a little favor? Can you send me full guide how to flash this file. Plssss
Click to expand...
Click to collapse
Hmm well, have u tried peeking at the device manager when you phone is connected to your PC in fastboot mode?
If there's an entry showing your device you will need grab a fastboot binary to flash the firmware.
Here's a link to the tool called minimal ADB and Fastboot: here
You will also need to extract the firmware to somewhere in your drive.
Having done all the extraction and installation,
and since you're on Windows, you should do:
Bash:
\path\to\fastboot flash:raw boot \path\to\boot.img
\path\to\fastboot flash system \path\to\system.img
where \path\to\fastboot points to the path where you have extracted/installed the tool (or if you have added its path to the PATH environment variable, you can avoid the hassle to write the full path), and \path\to\boot.img and system.img points to absolute path of the extracted firmware.
Then, you are good to go!
B83C said:
Hmm well, have u tried peeking at the device manager when you phone is connected to your PC in fastboot mode?
If there's an entry showing your device you will need grab a fastboot binary to flash the firmware.
Here's a link to the tool called minimal ADB and Fastboot: here
You will also need to extract the firmware to somewhere in your drive.
Having done all the extraction and installation,
and since you're on Windows, you should do:
Bash:
\path\to\fastboot flash:raw boot \path\to\boot.img
\path\to\fastboot flash system \path\to\system.img
where \path\to\fastboot points to the path where you have extracted/installed the tool (or if you have added its path to the PATH environment variable, you can avoid the hassle to write the full path), and \path\to\boot.img and system.img points to absolute path of the extracted firmware.
Then, you are good to go!
Click to expand...
Click to collapse
Ma'am/sir. Thanks, it's fix now. Thanks for the help. Godbless and stay safe.
Hello, in case you are looking for a twrp image for the device, here's one I have ported myself:
TWRP_N940Sc_V3
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
B83C said:
Hello, in case you are looking for a twrp image for the device, here's one I have ported myself:
https://www.mediafire.com/file/0547s4g8hdojctq/TWRP_N940Sc_V3.img/fileTh
Click to expand...
Click to collapse
Thankyou! Uhm is there any custom rom? Can you please port a custom rom or upload please i really need it[/url]
John072021 said:
Thankyou! Uhm is there any custom rom? Can you please port a custom rom or upload please i really need it[/url]
Click to expand...
Click to collapse
I regret to tell you that, no. Currently I have been using the phone as a debian server, since the LCD has been inadvertently broken ( I exerted too much force on it ). Moreover, the device doesn't recognize its battery, which suggests that I might have broken some part of it. Therefore, I have kinda lost any hopes for it. Plus, my linux machine is not powerful enough to build an android OS ( what do you expect much from an intel celeron? ).
PS: I might do it once I get my hands on a much powerful one, or maybe a powerful enough VPS? I am not quite sure but currently I am still in high school, meaning that I may or may not have time....
Best regards,
B83C
Hello
I own a tablet that is with android 4.4 and Would like to install on it android 8.0, but I would like to follow the procedure below, if anyone can help me with videos on YouTube or a Step by Step Tutorial that you know I thank you.
1 - I want to flash the original Android by downloading from the official Google repository and perform the flash of this image on my device, how should I perform the procedure ?
2 - If necessary, how do I extract and import the specific drivers from the manufacturer of my device to the new Android image ?
Thank you
thread moved please post questions in q/a
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Unlock bootloader first. It takes one week (168 hours) to be accepted by xiaomi.
Thank you for your reply but have you read anything i wrote
Try to check this Guide.
hellokelly said:
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Click to expand...
Click to collapse
It sounds like you need the adb drivers installed. Have a look here and see if that helps.
Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download
Here, we provide free Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download with single click on the download link below.
www.xiaomidriversdownload.com
That website failed to give me the drivers nothing happens when I click download / not to mention that it looks like one of those auto-generated spam websites to trick search engines to get clicks and push dubious phishing software and ads to unsuspecting users I think you should remove that link.
but I managed to fix my issue quickly after searching a bit more and looking at a youtube video where a guy came across the same problem I experienced
Can a mod here and or someone in lineageOS website change the
tutorials or guides or add additional info ?
DOWNLOAD THE MI UNLOCK TOOL is a bit misleading , because the newest version of the miunlock tool 6.5 and the version you download 5.5 etc.. when you click on download
https://en.miui.com/unlock/download_en.html on this webpage
DOES NOT CONTAIN ANY DRIVERS you have to find the older versions by clicking FAQ and going here :
https://c.mi.com/thread-2262302-1-0.html
and download 4.5 and lower because the driver_install.exe file
DOES NOT EXIST in the newer versions of the tool which creates the problem I am having.
Xiamoitool V2
GitHub - francescotescari/XiaoMiToolV2: XiaomiTool V2 - Modding tool for xiaomi devices
XiaomiTool V2 - Modding tool for xiaomi devices. Contribute to francescotescari/XiaoMiToolV2 development by creating an account on GitHub.
github.com
at this github page also supposed to work and install drivers but I have not used it.