Related
All credits go to the AC!D team
Downloads
http://forum.xda-developers.com/showthread.php?t=2002197
READ CAREFULLY FOLLOWING INSTRUCTIONS AND ALL WILL BE FINE!
§1 Remove ALL Third app equaliser (DSP Manager, Market EQ app,...)
§2 Be sure your ROM don't have any other Sound MOD preinstalled
§3 Download AC!D Audio Engine
(You can choose between AROMA and the standard flashable zip, read careffuly the difference between AROMA and SIMPLE)
§4 ONLY if you downloaded SIMPLE ZIP, download walkman player and (if you want) the addon of your choice (Noozxoide for example)
§5 Put downloaded files in a special folder on your SDCARD (or internal storage), you can create an AC!D Audio folder (will be usefull in the future)
§6 Once you have all needed files on your phone reboot in recovery (CWM)
§7 FIRST WIPE CACHE PARTITION AND DALVIK CACHE!!!
§8a AROMA: only after that if you only downloaded AROMA version just flash it and follow instruction, take time to read (really easy installation with good explaination) (don't care about status 0 error showing at the end of installation just reboot)
<<< Do not follow theses steps if you use AROMA go to step 9>>>
§8b SIMPLE UPDATE ZIP: (Walkman is not compatible with any other addon, so you have to choose between Walkman or one of 4 availble Addon)
- AC!D + Walkman: First flash AC!D Audio Engine, Then if you want Walkman (with clearbass, xloud etc) Flash Walkman Addon and reboot
- AC!D + ADDON: First flash AC!D Audio Engine, (DO NOT FLASH WALKMAN!!!), and then flash the Addon of your choice (Noozxoide for example) and reboot
<<<>>>
§9 open an explorer (I recommand Root Explorer) and verify if build.prop lines where added (Go to /system/ and open build.prop file look at the end of this file)
§10 if lines where added correctly just reboot if not add them manually
PHP Code:
###AC!D Sound Tweaks by R-ikfoot###
#Sony Xloud & Clearbass +
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.somc.dmnorm.supported=true
persist.service.dmnorm.enable=1
ro.sony.walkman.logger=1
ro.somc.clearphase.supported=true
persist.service.clearphase.enable=1
#Resampling
af.resampler.quality=255
persist.af.resampler.quality=255
#Beats Engine
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
save build.prop changes and reboot
§13 go to setting sound audioeffect and choose the Equaliser you want (it will keep the one you choosed in memory)
§12 Enjoy a brand new Audio Quality
Wtf... you just copied the tutorial from the link and paste it here...
Sent from my GT-P7500 using XDA Premium HD app
Kangbook Pro - Based on AOKP
CustomROM|ICS 4.0.4|XLoud|Dolby|Beats Audio|SRS WOW|ClearBass Audio Effect|Dolby EQ|Adrenaline Engine| And Much More For Micromax Funbook Pro
Features -
-Pre-rooted
-Zipaligned all .apk files to optimize ram
-Added Init.d Support
-Trebeuchet Launcher
-Better Video Playback and Streaming
-Better Camera Image Quality
-Battery Tweaks (Immense battery backup)
-Adrenaline Boost script included
-Aderanaline Engine Added
-Awesome Touch Response
-Performance Tweaks
-Net Speed Tweaks
-Tweaked Hosts File (No more advertisements)
-Ram Tweaks and Scripts
-Tons Init.d tweaks
-Tons of build.prop Tweaks
-Apollo music player
-Xloud Engine (AC!D Sound Mod)
-Dynamic Bass (AC!D Sound Mod)
-Dolby Sound System (AC!D Sound Mod)
-Beats Audio (AC!D Sound Mod)
-SRS WOW (AC!D Sound Mod)
-Clearbass (AC!D Sound Mod)
-Clearaudio+ (AC!D Sound Mod)
-Clearbase (AC!D Sound Mod)
-Dolby EQ (AC!D Sound Mod)
-Supermacy Script Added
-Superchargerv6 script Included
-SD Card will work faster
-New Lockrings
-Awesome New Boot Animation
-Pre-Overclocked
-Very Fluid Performance
-Much More !
_________________________________________________________________________________
How to Install this ROM?
*This ROM is flashable via CWM recovery
Note: Make a backup before flashing this ROM, just in case something goes wrong!!
1. Download Kangbook Pro ROM, gapps and Multi DPI Play Store for ICS.zip
2. Place these files on your external SD
3. Make sure you have installed CWM
4. Reboot to recovery
5. Wipe data/ Factory reset
6. Wipe Cache partition
7. Wipe dalvik cache in advanced menu
8. Choose the option Install zip from sd card and locate the zips and flash in this order -
(i)Kangbook-Pro-ROM
(ii)gapps
(iii)Multi-DPI-Store for ICS
9. Reboot system
10. Enjoy !
_________________________________________________________________________________
Downloads-
- Kanbook-Pro-v1
- Gapps-ICS
- Multi DPI Play Store for ICS
_________________________________________________________________________________
FAQs
1) How to use Adrenaline Boost Script ? --> Download Terminal Emulator, Open it then type
Code:
su
boost
2) How to use superchargerv6 script --> Open SManager, touch browse as root, hit back two times then go to system-->xbin-->superchargerv6.sh--> touch the su icon (make sure it is green) --> touch run. go through the script. Then choose the 9th option at the driver's console. Then choose the SuperClean and Restart Option. (you will have to run the script every time when you reboot but when you run first time it takes time to install but when u do it after reboot it will take u straight to driver's console and after that choose 33rd option and hit back.) Done !!
_________________________________________________________________________________
Special thanks to
- AC!D Sound Engine Team
- MyLifeRocks10 for Multi-DPI Play Store
- ImbaWind for Adrenaline Engine and Adrenaline Boost
- To all the other people whose scripts I have used
Awesome work!
How about some screenshots?
thanks
No browser preinstalled?
also updating apps in play store casuses issues, eithers RPC error or package file invalid error
Introduction
This is a new thread for AOT 5035.I started it,because there isn't any complete thread for our phone.I want to post my experience,ROOT guide,recoveries,tweaks,engines,...and maybe later a custom ROM
Disclaimer
Immediatelly on the beginning I have to tell you,that I've tried all of the recoveries,guides etc.,which I've posted here,BUT:I have AOT 5035D,so it may not be working on other 5035 device.You should have at least basic knowledge about what are you doing and necessary terminology! You're doing everything on your own risk! I'm not responsible for any bricked or damaged devices,degraded batteries or SD cards.It's recommended to do a full backup before aplying tweaks! If you don't understand anything,contact me immediatelly!
If you have some advice or objection,write a comment or contact me on e-mail or FB.Your response is welcome.
I greatly recommend to begin a member of the usergroup on facebook (I'm a new xda member,so I can'give you the link )
Alcatel 5035 X'POP thread
ROOT
I probably don't have to explain you why root your phone.If you don't know why do not root!
There is a guide on xda but I found it too difficult.Other posibility is root through Baidu root,which is an android app.The only problem is,that the app is in chinese language,but if you are clever,you'll success.The last method is the easiest and most comfortable:Kingo Android Root.This is a user-frindly program for MS Windows.
Guidelug your phone to computer via USB and let it instal phone drivers.Download and instal Kingo root.Run the Kingo root.It automaticly detects your device.Hit "ROOT" button and wait until it reboots your phone.Go to the app drawer in the phone.If you find "SuperSU" app,you were successfull! There are also other posibilities:Framaroot,OneClick root but I wasn't successfull with them...
Alcatel 5035 X'POP thread
Recovery
There are lots of recoveries,but I recomend the two most famous:CWM and TWRP.You must have CWM for flashing most of 5035 ROMs but if you want to do a nandroid backup of your current ROM,you need TWRP!
How to flash recovery:It's very easy:
1.Go to Google Play and download [ROOT] Rashr flash tool.apk (or you can use Recovery flasher utility)
2.Download the recovery file on SD card
3.Open Rashr,grant it su permission
4.Hit "Flash recovery>Other from sdcard
5.Choose the recovery file
6.It asks you if you want to flash it>hit "Yes,please"
7.Wait until it flashes it
8.It says Recovery flashed! and asks you if you want to reboot into recovery>Hit "Yes,please"
9.If the phone rebooted to the recovery,you were sucessfull...YEAH!
If the flashing process failed,try it again and if you aren't sucessfull again try another recovery.You can download CWM and TWRP from here and I also uploaded Carliv touch recovery. Carliv Recovery is very good because you can use it both for nandroid backup and for flashing. On the other hand, this recovery was a little buggy on my phone...
Alcatel 5035 X'POP thread
Build.prop tweaks
Build.prop is a system configuration file. You can find it in /system partition but in some cases (e.g.: Stock ROM) the build.prop file is also in the /custpack partition so don't forget to add these commands to both of these files! Adding the following commands there, you can enjoy better performance of your phone Copy these commands from below, open an file manager (I recommend X-Plore, Total commander or ROOT Explorer), find build.prop, long prsss on the file, choose "Edit text" and paste those commands on the end of the build.prop, save all changes and reboot your phone. You should notice that your phone is smoother and the graphic performance is better
# Tweaks by MikkyX3 ( xda developers ) #
# Display Config
persist.sys.scrollingcache=2
persist.sys.use_16bpp_alpha=1
persist.sys.use_dithering=0
windowsmgr.support_rotation_270=true
# Better Responsiveness
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
ro.camcorder.videoModes=true
# Performance
debug.sf.nobootanimation=1
ro.HOME_APP_ADJ=-25
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.lockprof.threshold=500
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=64m
ro.compcache.default=0
persist.service.compcache=0
persist.sys.purgeable_assets=1
# Hardware Acceleration
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.kill_allocating_task=0
# GPU
com.qc.hardware=true
video.accelerate.hw=1
persist.sys.ui.hw=1
hw3d.force=1
debug.sf.hw=1
debug.enabletr=true
debug.composition.type=gpu
# Battery
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
ro.ril.fast.dormancy.rule=0
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.enable.dtm=1
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Faster Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Experimental Tweaks - remove "#"
#touch.presure.scale=0.001
#ro.min_pointer_dur=8
#ro.media.enc.hprof.vid.fps=65
#ro.media.cam.preview.fps=0
# End of tweaks by MikkyX3 #
I'll update these commands and I'll add new ones to gain the best performance
Alcatel 5035 X'POP thread
Sound improvement
There are lots of sound tweaks and mods on the Internet, but the improvement isn't very noticeable.After a long time of searching and experimenting I found Viper4Android app.You need ROOT and Busybox installed on your phone.You can download the latest version of the app from here.For instalation you have to allow non-Google Play apps installation (Settings>Location&Security>Non-Play store apps allowed).When you open the app,you have to grant it SU permissions,then the app asks you for instal sound drivers.Choose Best quality,it hasn't significant battery consumption,believe me .Then reboot your phone,open Viper app and set the sound as you like.
Stock ROM ?
Does anyone have here a original stock ROM if anything goes wrong so it can be flashed and returned to default state ?
Alcatel One Touch site support doesn't archive stock ROM's.
Hey Guys,
My name is Braa, I’am just a new developer here in the XDA and today I’am going to show you a complete guide on how to make your own “XPERIA” Stock Based ROM.
First of all you have to get the Stock XPERIA Firmware of your device
Let’s get started to build our ROM:
First Step: (Getting the STOCK FTF File of your Device)
1) Get the latest stock FTF Firmware of your device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Open it using 7-ZIP
3) Now we will be focusing on the most important file “system.sin” Just Extract it to your desktop
4)Now go to the XPERIA Flashtool Tools Sin Editor Choose the system.sin file you have just extracted to your desktop Extract Data
5)Now you will have a file called “system.ext4”
6)Get a tool called “EXT4 Unpacker” then select that file Extract all the files into a folder
Congrlatiouns you have got your stock device firmware but not in the form of “FTF” instead in the form of “ZIP”
But this was not everything we will now move into more advanced part but don’t panic everything will be explained easily with screenshots so, Let’s GO !
Understanding the System folder you have just extracted
System Folder Contains the Majority of ROM Files, now we have to explain the SYSTEM Folder structure
1. app : contain all the system's app and the odex file of system app
2. bin : contain the command and bin files for the rom
3. vendor: specified vendor system. you have your specific vendor's app, libs, and config files here also contains the Themes (XPERIA 2011-2012 Devices)
4. etc : additional setting and files for the ROM.
5. font : It’s Clear it contains the fonts
6. framework : system's framework files and the odex file for framework
7. lib : drivers, modules, kernel related files for the rom
8. media: media files-ringtones, notification, bootanimation.
10. usr : files needed for keyboard, bluetooth, etc.
11. xbin : additional command and bin files (busybox is usually installed here)
12. build.prop file : Contains your Device default properties
Q)DEODEX VS ODEX
A)Most of custom rom available is deodexed rom while our stock rom is half deodexed rom. I'll try to explain it in most simple way. First of all, we should understand that mostly every app in android consist of three part, *apk files, *dex/odex files, and lib files.
ODEXED rom means that *dex file needed to run the app is extracted from the apk file and placed in same folder with the apk files (/system/app). the positive side, it consume less internal memory and a execute faster. the negative side, it makes the app uncostumizable (cannot apply custom themes) and need more space in system partition.
DEODEXED rom means that *dex file needed to run the app is extracted from the apk file and placed in /data/dalvik-cache. the positive side, the app can be themed (full customizable) and consume less system partition. we could put more app in /system/app in deodexed rom. the negative side, it consume a lot of internal memory. please be cautious with the internal memory space if you use deodexed rom. (NOTE: if you start from stock rom, you may use Kitchen to convert odexed to deodexed rom).
Now if you want a really looking good Ui ROM u will stick into DeOdexing your ROM
Note: What was explained above in the part of ODEX VS DEODEX doesn’t mean that DeOdexing ROM will decrease it’s Performance
Q)How to DeOdex My ROM ?
A)Bro, This could be done using many tools like (Universal DeOdexer or DsiXda Kitchen)
Now I will explain the Dsixda kitchen method
Tools Needed:
Cygwin
JDK
Android Kitchen
Steps:
1)Extract Cygwin.zip Run Setup.exe Next Install from local directory Set the root directory as it Set the local package directory as cygwin_packages Select that reload icon and install all
2)Now Click on Cygwin icon on desktop you will see that commands appear automaticly
3)Now Extract the kitchen Android-Kitchen-0.224.zip then rename it to “kitchen” (without the quotations)
4)Then copy that folder into c:/Cygwin home your username folder
5)Open the cygwin and write these commnds
6)Cd kitchen ./menu
7) Just compress the system folder we have just extracted from the ext4 unpacker into ZIP File
8)Now copy that file to C:\cygwin\home\Your username\kitchen\original_update
9)Open the cygwin then write the kitchen commands I’ve mentioned above
10)Select “Set up working folder of your ROM” Press Enter Select the zip you compressed It will ask you to add a null boot.img agree to this
11)Select the “Advanced Options” Select De-Odex files in your ROM Select “b” DeOdex both folders (Recommended) wait till the process finishes
Updater Script ! (Nightmare to a lot of noobs)
Sorry Guys I can’t help you with this part even my updater-script in my ROM I forgot how I did it here is it you can base your updater-script on it
Just download it !
WE’VE Done this part !
Modifying your ROM
1)Adding Tweaks
1.1)Adding init.d Support
Adding init.d support means that you can run your favorite scripts and tweaks on your Stock Based ROM
Download the file “enable_init.d.zip” and put all its files inside system folder into your ROM System Folder
1.2)Modifying Build.Prop for more stability
Here’s a lot of Build.prop Tweaks
1. Force launcher into memory
ro.HOME_APP_ADJ=1
2. Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
3. VM Heapsize; higher RAM, higher hp can be
dalvik.vm.heapsize=48m
4. Render UI with GPU
debug.sf.hw=1
5. Decrease dialing out delay
ro.telephony.call_ring.delay=0
6. Helps scrolling responsiveness
windowsmgr.max_events_per_sec=150
7. Save battery
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
8. Disable debugging notify icon on statusbar
persist.adb.notify=0
9. Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
10. Raise photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
11. Signal (3G) tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
12. Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
13. Disable blackscreen issue after a call
ro.lge.proximity.delay=25
mot.proximity.delay=25
14. Fix some application issues
ro.kernel.android.checkjni=0
15. Phone will not wake up from hitting volume rocker
ro.config.hwfeature_wakeupkey=0
16. Force button lights on when screen is on
ro.mot.buttonlight.timeout=0
17. Disable boot animation for faster boot
debug.sf.nobootanimation=1
18. Miscellaneous flags
ro.config.hw_menu_unlockscreen=false
persist.sys.use_di ring=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
Q)How can I add these lines to my build.prop
A)I will tell you
Download a tool called “Notepad++”
Extract the build.prop file from your ROM then right click on it then edit with notepad++
Go to Last line:
Then add
# Tweak Name
Tweak Properties
#
Done
Here’s my build.prop I used in my ROM: its just a sample copy what you want from it
2)Bravia Engine 2 with X-Reality
Download the file of BE-2 then paste it in your ROM then add these lines to build.prop
# X-Reality Engine
ro.service.swiqi2.supported = true
persist.service.swiqi2.enable = 1
#
ro.service.swiqi3.supported = true
persist.service.swiqi3.enable = 1
#
3) Modifying the wallpapers of the ROM
Go to etc\customization\content\com\sonyericsson\wallpaperpicker\wallpapers
Then Add your Wallpapers
4) Modifying the Themes
system\vendor\overlay\framework
Themes are found here
In newer XPERIA Devices Themes are found in /app
5) Adding Supercharger intiries
Just add these lines to your build.prop
# V6 SuperCharger, OOM Grouping & Priority Fixes created by zeppelinrox.
# DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE!
# BEGIN OOM_MEM_Settings
ro.FOREGROUND_APP_MEM=1536
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=4096
ro.HEAVY_WEIGHT_APP_MEM=20480
ro.SECONDARY_SERVER_MEM=8192
ro.BACKUP_APP_MEM=14080
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=10240
ro.EMPTY_APP_MEM=15360
# END OOM_MEM_Settings
# BEGIN OOM_ADJ_Settings
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=3
ro.HEAVY_WEIGHT_APP_ADJ=5
ro.SECONDARY_SERVER_ADJ=7
ro.BACKUP_APP_ADJ=6
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=12
ro.EMPTY_APP_ADJ=15
# END OOM_ADJ_Settings
# End of V6 SuperCharged Entries
6) Making your Apptray Transparent
Just Replace the apptray_pane_bg.9.png I provided to your Home.apk in store mode
7) Changing the bootanimation (HDPI)
XPERIA Z1
XPERIA Z2
8) Media not scanned or No pictures found here’s the solution
Download Rescan media root and put it in data folder of your ROM
Nice Tip:CFQ Scheduler Makes the Media scanning process slow, Just Stick into SIO or deadline
If you are on 4.1.2 and HDPI Device (Maybe works on XHDPI or MDPI)
So my ROM “Doomsday” is open source for you, it contains full XPERIA Z2 Ui just take the download link from my signature then download it and take what you need from it but don’t forget to give me the proper credits and press thanks for me
Thread will be updated soon :laugh:[/FONT]
Downloads
Downloads
My Personal ROM Updater-script
My Build.prop
[URL="http://d-h.st/j59"]Doomsday ROM[/URL]
EXT4 Unpacker
X-Reality and BE-2
apptray_pane_bg.9
XPERIA Z1 Bootanimation (HDPI)
XPERIA Z2 Bootanimation (HDPI)
Init.d Support
Good thread!
I have a problem:
cd kitchen: work
./menu: doesn't work
Can you help me?
Thanks in advance.
axxx007xxxz said:
I have a problem:
cd kitchen: work
./menu: doesn't work
Can you help me?
Thanks in advance.
Click to expand...
Click to collapse
Thisguide may help. :good:
you may also skip the DeOdexing part and download already deodexed ROM http://d-h.st/c6F
or that of @2010matej
@Eliminator79: Thanks!
[OFFTOPIC]Any news of Doomsday for Xperia E?[/OFFTOPIC]
axxx007xxxz said:
@Eliminator79: Thanks!
[OFFTOPIC]Any news of Doomsday for Xperia E?[/OFFTOPIC]
Click to expand...
Click to collapse
Anytime
@DanielFlorin did the dRz ROM
there is no need for doomsday in XE Development
you can consider dRz as an initial release for Doomsday for XE
and im always with contact with him about porting some stuff from doomsday to dRz
Eliminator79 said:
Anytime
@DanielFlorin did the dRz ROM
there is no need for doomsday in XE Development
you can consider dRz as an initial release for Doomsday for XE
and im always with contact with him about porting some stuff from doomsday to dRz
Click to expand...
Click to collapse
Now I'm using eXperia (see my signature); it is new dRz or I wrong?
axxx007xxxz said:
Now I'm using eXperia (see my signature); it is new dRz or I wrong?
Click to expand...
Click to collapse
Sorry for conflicting bro
i meant eXperia
Anyway,
Daniel Mentioned that he will release V3 but he needs some time
Eliminator79 said:
http://d-h.st/c6F
Click to expand...
Click to collapse
It is DeOdexed system folder for Xperia E Jelly Bean or I wrong?
axxx007xxxz said:
It is DeOdexed system folder for Xperia E Jelly Bean or I wrong?
Click to expand...
Click to collapse
Yes
World this work for the LG v10 h901 20j
EXTREME SYNDICATE LOLLIPOP STYLE!
WARNING
This ROM is not for the faint of heart. It is extremely debloated! I do not accept requests to add stuff back into the ROM. However, please post in here or the Q&A thread for this ROM and I am sure there are some experienced devs that could help you with your needs!
Features:
-Rooted
-Odexed and Deodexed versions available!
-Extremely Debloated
-Removed Verizon splash screen
-Removed Samsung Keyboard
-Added Google L Keyboard
-Removed boot sound
-Baked in MODS from Jrkruse (v4+ does not have his mods)
-I'm sure I'm missing some things as well as there is more to come! This is the initial release for L
Prerequisites
(You might not everything or maybe have everything you need but you would need the following based on the way you plan on installing)
-Extreme Syndicate L ROM of Your Choice
-OA8 Kernel
-NK2 Kernel and NK2 Stock ODIN FULL TAR (if necessary)
-NCG Kernel
-TowelRoot.apk
-Safestrap.apk
-ODIN
Downloads:
Extreme Syndicate L v5 (DEODEXED/THEME STARTED) ~496MB
MD5: 4f584a71755b526bce040b7e892a2ec9
Extreme Syndicate L v4 (DEODEXED) ~494mbMD5: fed66ae463fa6c584c990a9bb8c5a84b
Extreme Syndicate L v2 (DEODEXED) - ~600mbMD5: 2f987b83296d95771adf49fedc2cde27
Extreme Syndicate L v1 - Odex - 648.6mbDOWNLOAD HERE
MD5: 9d9db69a79fb206b21a4e83a1e31deb2
Install Instructions (YOU WILL NEED A PC AND ODIN):
Coming from stock rooted KK (with Safestrap)
-Download ROM.zip and put it on external SD card (or internal SD card)
-Download Stock OA8 Kernel to PC
-Boot into SS recovery and make a backup if you must
-Do standard wipes as usual
-Flash ROM.zip to stock slot
-PRESS HOME AFTER FLASH AND THEN REBOOT AND SELECT DOWNLOAD MODE
-Put OA8 Kernel in AP Slot in ODIN and flash to device and reboot!
-KEEP IN MIND, DEODEX WILL TAKE SOME TIME (MAYBE 10 MINUTES) FOR THE FIRST BOOT ONLY
-ENJOY
Coming from Muniz_ri's stock rooted OA8:
-Download ROM.zip and put it in storage on phone
-Download NK2/OA8 Kernel's and put on PC
-Put NK2 Kernel in AP Slot in ODIN and flash it (YOU WILL NEED TO PRESS RECOVERY OPTION FOR SS AS SOON AS YOU SEE IT)
-You should be in SS recovery now, backup if you must!
-Do standard wipes and then flash the ROM.zip to stock slot
-After ROM flash, press HOME and then REBOOT and select DOWNLOAD MODE
-Put OA8 Kernel in AP Slot in ODIN and press Start (DEODEX WILL TAKE ~10MINUTES ON FIRST BOOT ONLY)
-ENJOY
Coming from Stock (UNROOTED) OA8:
-Download ROM.zip, TowelRoot.apk and Safestrap.apk and put it on an External Storage (or wait until you are back on stock rooted nk2 and put it on internal)
-Download NK2 Full Stock ODIN TAR and put on PC
-Download NK2 Kernel and OA8 Kernel and NCG Kernel and put on PC
-Put NK2 Full Stock TAR in AP Slot in ODIN and flash it
-Once phone boots into stock NK2, put NCG Kernel in AP Slot in ODIN and press Start
-Once it boots, install and run TowelRoot.apk and make it rain! Then install Busybox (I use Busybox Installer) from the play store and then install Safestrap.apk and once installed open it and Install Recovery
-At this point you should be able to boot into SS Recovery and do your normal wipes and make a backup if you must!
-Flash ROM.zip to stock slot, press HOME and then REBOOT and select DOWNLOAD MODE
-Flash OA8 Kernel in AP Slot in ODIN (AGAIN, DEODEX VERSION WILL TAKE UPWARDS OF 10 MINUTES ON FIRST BOOT ONLY)
-ENJOY!
Updates/Changelog:
ODEX Versions Changelog:
Extreme Syndicate v1.2 (not released):
-Removed more bloat! (~80mb more bloat removed)
-Removed boot sound (Next update I am also going to replace the boot animation to maybe L)
-Fixed build.prop to display ROM name in About Phone
Extreme Syndicate v1 - Initial Release
DEODEX Versions Changelog:
Extreme Syndicate v5 (SCREENSHOTS):
-Removed Google keyboard and added back stock Samsung Keyboard
-Added Galaxy S 5 Bios Bootanimation
-Removed stock TW launcher and added Note Edge Launcher
-Added 3minit battery mod back
-Themed (Status Bar/Notifications Drop Down, Stock MMS Application, Settings, Toggles, Samsung Music Application, Stock Video Application and might be missing some)*
-Added a modded stock Camera application (not sure what the difference is but will post more info if I find it)
Issues:
-I for some reason am unable to send MMS. I am not sure what it is but am going to try with a 3rd party messaging application to see if it is the messaging app or not
Extreme Syndicate L v4
-Removed Bloat to less than 500mb total size
-Updated base to BOB7 from international thread (used JRKruse stock base OB7 build)
-Since this is based off the international build, VOLTE is not installed so I do not think HD/VOLTE will work (I do not use it)
Extreme Syndicate L v2 (First RELEASED Deodexed Build):
-Removed bloat to ~600mb total download size and RAM usage under 1gb
-Baked in all of Jrkruse MODS posted in his thread
-Removed Samsung keyboard and added Google Keyboard
-Replaced Verizon boot with Samsung boot
-Removed boot sound
Extreme Syndicate v1.2 (not released):
-Removed more bloat! (ROM is now down to ~470mb)
-Removed boot sound (will also change boot animation in next update)
-Added ROM name to build.prop
Shout Outs:
-muniz_ri for the quick work on creating a rooted OA8 stock ROM and providing detailed instructions for us and allowing me to use his base! Thanks man!
-Jrkruse for his Deodex base and the initial set of MODS! (I also mention I used his base in the updater-script when flashing the ROM.)
-Geohot and Hashcode (root+recovery)
-All my fans for liking this ROM!
[email protected] for his amazing batch deodexer for Lollipop!
-I WILL ADD MORE IF NECESSARY AND IF I FORGOT SOMEONE DON'T BE AFRAID TO LET ME KNOW!
I Do Drink Beer! If You Like My Work Don't Be Afraid to Donate!
Extreme Syndicate v2.1 and older versions (4.4.x)
EXTREME SYNDICATE v1
Oh no... I did it again! This time the name is "Extreme Syndicate!" Extreme because this ROM is just that! The lightest and meanest ROM for our device. And Syndicate because I couldn't have done it alone without the help from multiple people on XDA! From root, SafeStrap, Samsung, XDA, Beans etc. this ROM would not be possible without you all. Whether you care or not, you are part of the Syndicate for life!
Shout Outs:
- Geohot (For Root)
- Hashcode0f (For SafeStrap)
- Beanstown106 (For Base ROM)
- EMSPloit (For MODS/Toggles)
- MrHyde03 & Chronocaust (DB MOD+Toggles)
- Edgarf28 (Inspiration for ROM)
- Archikitchen & Others (Kitchen To Make ROM)
- Versatile1 (Exchange MOD)
- Misterxtc (For Helping Me With Everything!)
- Kdio (Over in G900f Forum for the theme base!
- AcidBurn22 For Helping Me Pull Some Files for Extreme Syndicate v1 (Some APK's That Were Giving Me FC's)
Special Shout Out to Tomsgt for the Install/Review Video! Check it out HERE!
Features:
- DeOdexed
- Rooted
- Busybox
- Init.d Support
- DeKnoxed
- OTA Disabled
- Security Updates Disabled
- Read/Write to External Storage
- Moved Dalvik to Cache
- Dalvik VM Optimization
- Battery Life Expansion Tweaks
- Better LMK Configuration
- Internet Speed Tweaks
- Sdcard Read-Ahead Optimization
- Zipalign On Boot
- Smallest file size on the g900v!
- Stock Themed Launcher
- Android L Boot Animation (Sound Disabled)
- Android L Keyboard
- Android L System UI Sounds (Ones I Could Find)
- Android L Alarm Sounds
- Android L Ringtones
- Android L Notification Sounds
- LG G3 Keyboard (Because it looks oh so nice!)
- Chomp SMS (Use Dark Mode Theme and Adaway to remove ADS)(You Can Replace This WIth SMS Apk of Your Choice)
- Mobile Hotspot With Toggle
- Added Extensive Build.Prop Tweaks
Install Instructions:
The Install Instructions Have Changed So PLEASE Read Carefully As I Will Not Be Responsible For Screw Ups!!!
Coming From NCG With SafeStrap Recovery:
1: Download ROM.zip to Internal Storage or External SD Card
2: Download NE9 Firmware Located HERE to PC (Yes, you will need to use ODIN)
3: Boot Into SafeStrap Recovery
4: Wipe That Bad Boy (Basic wipe shall do)
5: Flash ROM.zip
6: Immediately After ROM flashes Go Into Download Mode
7: Use ODIN To Flash The Firmware/Bootloader Located HERE(Thanks You Beans!)
8: Phone Should Reboot And You Should Be On Extreme Syndicate v1 NE9!
Dev Edition Install Instructions:
1: Download ROM.zip to Internal Storage or External SD Card
2: Reboot to Recovery
3: Flash ROM.zip
4: Flash NE9 Modem
5: DO NOT FLASH NE9 FIRMWARE PACKAGE!!! THIS WILL RUIN YOUR NICE DEV EDITION PHONE FOR GOOD
Downloads:
EXTREME SYNDICATE v1 ~488mb
MD5: 4d7161edf2cbadfe7acca2bd55a54998
MTP FIX - Flash the ZIP or Push APK to system/priv-app and Set Permissions to rw-r-r
Flashable ZIP
MtpApplication.apk
OLD BUILDS:
DEODEX
Symbiote Syndicate v1
Symbiote Syndicate Theme.zip
SuperSU.zip
v1.5
v1.3
v1.2
v1.1
v1.0
ODEX:
v1.0
I Do Drink Beer! If You Like My Work Don't Be Afraid to Donate!
XDA:DevDB Information
Extreme Syndicate, ROM for the Verizon Samsung Galaxy S 5
Contributors
elliwigy
ROM OS Version: Lollipop
Version Information
Status: Stable
Created 2014-06-30
Last Updated 2015-03-28
Changelog:
8/19/2014 EXTREME SYNDICATE v1:
- Stock base updated to NE9!
- Removed most MODS (Don't know if I will be adding them back, have fun and put what you use back on!)
- Removed Stock SMS apk again.. It was having terrible Lag
- Added Chomp SMS (enable Dark Mode theme and use Adaway to remove the ADS... Or uninstall and install your own sms apk...)
- Added Adaway back
- SuperSU is now integrated (Thanks again Beans!)
- Theme is now integrated
- Added extensive Build.Prop Tweaks:
Tweaks are thanks to Thereassaad over in the Samsung Galaxy S 5 forum (G900F)
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Enable GPU Acceleration
debug.sf.hw=1
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
# Battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Reduce dial-out time
ro.telephony.call_ring.delay=0
# Allow purge of assets to free more ram
persist.sys.purgeable_assets=1
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=15
mot.proximity.delay=15
ro.ril.enable.amr.wideband=1
# TOUCH
touch.presure.scale=0.001
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Force launcher into memory
ro.HOME_APP_ADJ=1
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
#dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Disable Error reporting and logs
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Fix some application issues (FC)
ro.kernel.android.checkjni=0
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# CRT
persist.sys.screen_off=crt
persist.sys.screen_on=none
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
# Disable logcat
logcat.live=disable
# Better image quality, lower performance.
persist.sys.use_dithering=1
Symbiote Syndicate v1 (Formerly known as Extreme Debloat) Changelog 8/1/2014
- Themed! Screenshots located here in this post: http://forum.xda-developers.com/showthread.php?p=54549810
- Removed 8sms
- Added stock messaging apk
- Name of ROM changed
- Removed Nova
- Added themed TW Launcher back
v1.5 Changelog 7/19/2014
- Remove V4A until I can figure out the issue with playback
- Fix battery drain (Me and a few others are having this issue)
- Incorporate toggles so you don't have to flash an additional .zip
- Remove Fly-On MOD (I havent noticed a difference and this one or other MODS can be manually installed via flashing zip in recovery if you want)
- Add wallpaper picker back so it can be set through settings
- Add stock clock (I use this for alarms as well)
- Move dalvik to cache
- Dalvik VM optimization
- Battery life expansion tweak
- Better LMK configuration
- Internet speed tweaks
- Sdcard read-ahead optimization
- Zipalign on boot
v1.4 was not released
v1.3 Changelog 7/16/2014!
- Debloated more.. Its now only 475mb!!!
- Settings FC on Reboot is Fixed!
- Added Now Browser (Less than 200kb in size)
- Added Download Booster back
- Added Call Recording MOD
- Added 4-Way Reboot MOD
- Added Download Booster, Flashlight & Hotspot Toggles.zip (Flash after first boot for now)
- Added Exchange MOD (For you Syn Ack lol)
- Added Themed Phone/Log/Contacts (Darker)
v1.2 7/13/2014 ~509mb
-Remove Download Booster to make native hotspot work again. (You can follow the steps to make download booster work in that thread.)
-Remove more bloat!
-Change ro.build.version.codename=L to ro.build.version.codename=REL in build.prop to fix some compatibility issues with some apk's. Also, there wasn't much of a difference at all in appearance.
-Add "Now Browser" with Material Look. This browser can be downloaded from the Play Store as well. The reason is because it is less than 200kb in size and works wonders!
-Add Adobe Flash Player (to make flash videos work in browser.)
-Add Adaway (to remove pesky ads from websites and apk's.)
-Add Fly-On Mod/Tweaks into ROM. (I have tested on my device for a day now and it really does help!) Will be added once I get permission from the creator of the MOD.
-Mod includes the following:
~Full Memory Management
~Linux kernel tweaks and improvements for better performance and battery life
~Entropy Generator Engine to reduce lags
~Zipalign apps in /system and /data every 48hrs to help reduce RAM usage
~SQLite optimizations and faster database access
~CPU Governors tweaks and improvements for better performance and battery life
~Increased SD Card read-ahead cache to 2048
~Ad Blocking (paired with Adaway)
~Build.prop tweaks and improvements
~Cleans log files and tombstones on every boot
~Many other tweaks for better performance and battery life!
-Possible am going to replace the Android L launcher with a themed Nova Launcher (is lighter than Android L launcher and more themed with more options overall.)
v1.1: 7/5/2014
-Added download booster (need to flash Slym Hydes db toggle AFTER first boot or follow instruction from original MOD post to turn it on with a shortcut)
-Added Viper4Android (Open app after install, install driver then reboot and enjoy better audio!)
-Removed some more bloat!
v1.0:
Initial Release
To Do List:
-Possibly some more debloating (I know there are some Lib files I can remove)
-Theme (WIP, I just barely had time to dive in to it after making v1.2 of the ROM but so far just have all the tools necessary and need to find time outside of work to start diving in)
Wierd issue with delay in calls coming in (Should be fixed in v1.2, Let me know if there is still a lag)
Add-Ons:
These add-ons are for Lollipop builds and need to be flashed in SafeStrap Recovery either immediately after the ROM is flashed or by these instructions if you are already on Lollipop:
1) Download the add-on/s you are wanting to flash and put it on your ext-sd or internal sd storage
2) Odin a 4.4.x kernel to get into Safestrap Recovery
3) Flash the add-on/s as you would normally flash anything in SafeStrap
4) Press home, then reboot and select download mode
5) Odin the stock OA8 Kernel only and reboot
6) Enjoy!
Stock Samsung Keyboard (uploaded 3/14/2015)
First! Thanks for your work.
Honestly first doesn't mean s$%& but I've never been able to say it so I did.
Sent from my SM-G900V using XDA Premium 4 mobile app
Downloading now will let you now can't wait..
So far this is EXCELLENT. Lightweight, only 700MB RAM in use. Very fast. Will flash corporate email apk, the rest can be downloaded. So far so good.
Odex is uploading now.. its ~660mb
Sent from my SM-G900V using XDA Premium HD app
I'm not completely familiar with everything.... but is there a way to use this ROM with Xposed framework? I would really like a light-weight, highly customizable ROM and it seems like that combination would work. Again I'm probably thinking of the impossible in that.
Milltac said:
I'm not completely familiar with everything.... but is there a way to use this ROM with Xposed framework? I would really like a light-weight, highly customizable ROM and it seems like that combination would work. Again I'm probably thinking of the impossible in that.
Click to expand...
Click to collapse
Should still work. I haven't tested it yet (waiting a little bit) but I am on a debloated deodexed ROM right now using Xposed. Picture attached shows my notifications modified with Xposed.
Sent from my ROOTED white SM-G900V using XDA Premium 4
Milltac said:
I'm not completely familiar with everything.... but is there a way to use this ROM with Xposed framework? I would really like a light-weight, highly customizable ROM and it seems like that combination would work. Again I'm probably thinking of the impossible in that.
Click to expand...
Click to collapse
It is absolutely possible.. It's not included in the ROM but you can install the xposed framework and then use Wanam if you want or other xposed modules just fine! The ROM is barebone basically so its a clean slate for you to play with and adjust to your liking!
eragon5779 said:
Should still work. I haven't tested it yet (waiting a little bit) but I am on a debloated deodexed ROM right now using Xposed. Picture attached shows my notifications modified with exposed.
Sent from my ROOTED white SM-G900V using XDA Premium 4
Click to expand...
Click to collapse
You using Wanam to edit the notification drop down?
elliwigy said:
You using Wanam to edit the notification drop down?
Click to expand...
Click to collapse
Yep. And I centered the clock and have a circle battery.
Sent from my ROOTED white SM-G900V using XDA Premium 4
Has anyone had any Bluetooth issues with the s5 at all stock or custome roms.. I have been having idk like choppy streaming over bluetooth..runs great without...ROM is running great so fast an smooth
donbudafuko said:
Has anyone had any Bluetooth issues with the s5 at all stock or custome roms.. I have been having idk like choppy streaming over bluetooth..runs great without...ROM is running great so fast an smooth
Click to expand...
Click to collapse
i only use it once n a great while with my bluetooth speaker phone but no issues here
Sent from my SM-G900V using XDA Premium HD app
fyi both deodex and odex versions are available to download
Sent from my SM-G900V using XDA Premium HD app
elliwigy said:
i only use it once n a great while with my bluetooth speaker phone but no issues here
Sent from my SM-G900V using XDA Premium HD app
Click to expand...
Click to collapse
That's what I was afraid of..I use mine a lot cus my wife went out an bought me a Bluetooth sound bar an wen ever I connect my phone it sound really bad choppy, breaking up.. I might have to Odin back to stock on take it in thought it might go away as soon as some customs roms come around but hasn't.. Thank you
Milltac said:
I'm not completely familiar with everything.... but is there a way to use this ROM with Xposed framework? I would really like a light-weight, highly customizable ROM and it seems like that combination would work. Again I'm probably thinking of the impossible in that.
Click to expand...
Click to collapse
I've also installed Xposed with Wanam with no issues. Just make sure you download Xposed from the XDA forums.
elliwigy said:
It is absolutely possible.. It's not included in the ROM but you can install the xposed framework and then use Wanam if you want or other xposed modules just fine! The ROM is barebone basically so its a clean slate for you to play with and adjust to your liking!
Click to expand...
Click to collapse
One question though. How would I change the wallpaper on the lock screen?
GlitchMob said:
One question though. How would I change the wallpaper on the lock screen?
Click to expand...
Click to collapse
Change it from the gallery. Worked for me.
Sent from my SM-G900V using XDA Free mobile app
GlitchMob said:
One question though. How would I change the wallpaper on the lock screen?
Click to expand...
Click to collapse
thats in the op.. can set from gallery or long press on home screen n select wallpaper.
Sent from my SM-G900V using XDA Premium HD app