Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hello,
thank you for taking the time to read and try to help.
I got an Asus Padfone X from At&t and the refused to unlock it
Asus didnt help either.
not to bore you with details
but here is my noobish mistake tool form, i flashed the asus kernel .zip file to the bootloader using twrp.
now phone wont boot into recovery or bootloader
got the minimal tool which as you know include fastboot and ADB
but it wont detect the device ( it detected it before when i rooted the phone )
I made a backup before i flashed , but the problem i cant flash it to a device that wont go to bootloader or recovery
and wont be detected by ADB.
please guide this lost noob.
Hello Ultimician,
If your device cannot boot into recovery or bootloader it's a hardbrick. Flashing the wrong kernel will cause your device to hardbrick.
You probably still have a warranty, I'd go to your service provider and play dumb: "One day my phone just didn't turn on, I've tried everything even charging it."
If you know of someone that could JTAG your device you could go to them that might work, what the manufacture usually do is they replace the whole motherboard. ( What Samsung did when I bricked my device in any case.. )
Otherwise you could refer to these threads, be careful though they are not necessarily for your device. ( But they might be of help )
[GUIDE] Z Ultra and Z1 HARD BRICK RECOVERY
[Galaxy S III][IMPORTANT] GT-I9300 Hard Brick Fix
[GUIDE]Unbrick a Hard Bricked SPRINT Galaxy S3 (Without JTAG)
Best of luck mate!
thanksfor the swift assistance
thank you kindly
amazon offered me a refund
i will take my chances
Carefully when they send a device back to the maker they can often pull information.like last install and all of that. If you had a back up. I would try to flash the stock firmware. They are ways to do this with jig and other tools. I would try to flash stock every way I could before I take it back. I had s3 and bricked it long time ago.after many hours of reading I fixed it. Please always when flashing make sure it's for your device. Wish you luck2
Hi guys its the 3rd time that i post here in the forum hopping to restore my "dead" Moto G3 XT1543 1GB RAM Snapdragon 410 (MSM8916).
Some days ago I've unlock my phone bootloader in order to install CM14.1 and i did it with success! but my sim card wasn't working, so, I tried to look for a solution. And I found a video on youtube that showed the supost fix for this issue, but i was wrong. I've flashed the file which broke my phone immediately and now my phone doesn't do ANYTHING!! Well, at least it shows on my computer as QDLoader 9008 but for now on I dont know what I have to do! I know that the easiest way to fix it is buying another motherboard, but I think that still hope for someone to find the way to fix it! Well, if the pc recognizes the processor so there's something to be done right?
I had searched all over the internet during this week, and I found some interesting possible ways to fix it, but im not a developer so I need help and opinions from other people.
1)The first way was to change the mode to 9006 aka diag mode though some files wich in theory allows you to acces eMMC partition and restore all the 29 inside partition and recover your phone. The problem is: I don't know how to change it to diag mode, but yea i have the needed files, and i don't have the tool to acces the eMMC of the phone and i dont have a backup of the partitions to write over the corrupted ones.
2)The second way was to use this tutorial *http://www.droidsavvy.com/unbrick-qualcomm-mobiles/* that i still havent tried since my phone isn't with me right now. So, in this supose way we can contact the phone through a tool called QFIL and try to "Inject" the bootloader or whatever, in the phone to foce him into a bootloop and so enabling the fastboot mode which allows you to install a rom later on. well the problem for this one is, i dont know if it works on your moto g3 but i gonna try. (if you try this option tell me and i gonna upload the needed files because the folder avaliable in the link contais files for the processor Snapdragon 610 and Moto G3 processor is a 410)
3) The third way is a Jtag repair in a authorized store, but i dont think Moto G3 have a jtag fix (im posting this possibility because i could be wrong)
4) In this way could be a updated Blank Flash actually used to hard unbrick the Moto G1 and I Guess the G2? But im not a developer and I dont know too much about programing, but i'm sure someone out there is a pro
5) Use the QPST which is kinda the same thing as use a eMMC tool? ( again im not a dev ) and from what i got, is used to config all your phone from scratch. would be good if there's a tuto out there
6) Sit and wait till Motorola release the MBM-CI 5.0 which from what i got is used like the Blank Flash or used to make a Blank Flash idk
AGAIN!!! IM NOT A DEV, THIS IS JUST SOME WAYS THAT I FOUND OUT THERE ON THE INTERNET WHICH COULD BE USED TO FIX YOUR BELOVED MOTO G3!! SO, I'M SHARING ALL MY RESEACH WITH YOU GUYS BECAUSE IS A SHAME HAVE TO DUMP MY DEVICE LIKE THAT OR HAVE TO EXPEND LIKE R$ 500 IN A NEW MOTHER BOARD WHICH IN DOLLAR ITS LIKE 1600 U$D (this is Brazil guys yea it's a horrible country T_T ) SO I HOPE THAT THIS POST HELPS SOMEBODY AND IF YOU GOT SOME INFO SHARE TO HELP US TRY TO FIX THE PHONE!
hey you got successful??? in unbricking your phone?
[email protected] said:
hey you got successful??? in unbricking your phone?
Click to expand...
Click to collapse
not yet, i send my phone to an authorized i hope they can fix it via programming box
IkkyShad said:
not yet, i send my phone to an authorized i hope they can fix it via programming box
Click to expand...
Click to collapse
Ohhkay
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
siredux said:
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
Click to expand...
Click to collapse
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
IkkyShad said:
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
Click to expand...
Click to collapse
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
[email protected] said:
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
Click to expand...
Click to collapse
yeah, you can try but the models are different and also the partitions inside the phone... try it out and if it works you can post here
No u can't try the Moto g2 firmware..... As Moto g2 is also waiting for MBM CI 5 file for lollipop and Motorola is not releasing those file needed for blankflash
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Jaysin365 said:
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Click to expand...
Click to collapse
No... And just like previous Moto devices, it is unlikely we will ever get the necessary files.
Same situation, any updates?
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Click to expand...
Click to collapse
I appreciate any help!
gibarsin said:
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
I appreciate any help!
Click to expand...
Click to collapse
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
Thanks for the quick reply, I will post my results here whether it's successful or not.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
+1 on this.
The only other thing I would do is take it apart and detach one wire from battery and short that lose wire to the other wire (short the phone, NOT the battery!) for 15 sec or so and reconnect wire to battery and put phone back together and try boot to bootloader (power plus vol-dn). If no go, at that point if it were worth it I would give it to ATT to fix, or toss it in the drawer for parts.
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Durga teja said:
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Click to expand...
Click to collapse
Tell us how you bricked it?
KrisM22 said:
Tell us how you bricked it?
Click to expand...
Click to collapse
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
beyond my knowledge. Hopefully someone will jump in.
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
If there is no bootloader and the only thing that can be seen on the computer is QdLoader mode, it's done... Send it to Moto for repair or send it to the recycler, there is no fix we can do.
I've been trying to root my phone for the last few days, everything just seems to be going badly.
I was finally able to unlock the bootloader, and i wasn't able to flash TWRP
after trying to get it to work and faffing around in recovery. I some how have got my phone in an endless loop. But not just an endless loop, but after the phone logo comes up, my phone's screen goes all glitchy and crazy with loads of colour. I can go into fastboot mode all ok, but now i can't access recovery mode anymore it's the same as normal mode.
I have no idea what's going on
i can't flash anything, when i do i get the message USB Transferring ... USB Transmission OK
Hi !
This looks like a soft brick but can you tell us more about your device ( model , software ) ?
Thank you
It's a BLU Vivo 6. it runs android marshmallow
AHappyLittleFishy said:
It's a BLU Vivo 6. it runs android marshmallow
Click to expand...
Click to collapse
Hi !
Some devices just can`t be unlocked without a prover support from the manufacturer
You can search for more on Google and wait for development , your case is far from unique
I see that you have alredy posted same issue here
https://forum.xda-developers.com/an...oot-device-t3546400/post70765622#post70765622
Thread closed