Related
Hi ,
I bought new htc explorer and successfully rooted it.
I am tring to increase my internal memory by this script : http://forum.xda-developers.com/showthread.php?t=1932874
i just partitioned my 8gb card to 4,4 both primary , 1 fat32 and 1 is ex2.
I implememted all ways, installed and all terminal steps worked fine.
But my internal storage didnt increase sill 9mb remaining , but yes SD card is showing the 4 gb storage but how i can attach the other 4gb storage to internal memory
i also tried 2nd options also ,flash that recovery file after 1st options but both are not working although my explorer is rooted. In boot mode it says installed successfuly but internal memory donot increase.
Then i came to know that i hadnot enable init.support in the stock rom as above process requires this , so i tried this step
http://forum.xda-developers.com/showthread.php?t=1422061
and getting error :
exit value : 0
stdout : M2SD has already been loaded. Canceling Second Run.
so how i can enable init support in my pico to execute the script to increase memory
Thanks
Dude the best advice i can give you is to try a custom stock based rom like Nextgen 1.5. It has m2sd preconfigered so you wont have any probs.
Sent from HTC Explorer powered by Nextgen v1.5
make a setup of my official rom
satvik7star said:
Dude the best advice i can give you is to try a custom stock based rom like Nextgen 1.5. It has m2sd preconfigered so you wont have any probs.
Sent from HTC Explorer powered by Nextgen v1.5
Click to expand...
Click to collapse
Can you tell me how i can make a setup of my official rom so that whenever i want to install the official (stock)rom again after custom rom. I can easily transfer.
This Rom you shown is using android 2.3. I am thinking to shift to 4.0. can you please tell me disadvantage if there any also can it support ? and work fine.
Thank You
shanalikhan said:
Can you tell me how i can make a setup of my official rom so that whenever i want to install the official (stock)rom again after custom rom. I can easily transfer.
This Rom you shown is using android 2.3. I am thinking to shift to 4.0. can you please tell me disadvantage if there any also can it support ? and work fine.
Thank You
Click to expand...
Click to collapse
1. Go to recovery then backup & restore then select backup
It will create clockworkmod folder on your sdcard and you can restore it by using the restore option.
Make sure u hav suff. space on sd card. I make with > 1gb free
2. Its your choice. If you want the stock exp.then go with the rom i told. For me HTC Sense is very imp. so m sticking wid nextgen.If you want something new then go wid CM9 or 10 or whatever rom.
Personal exp.- I just missed sense after switching to a non-sense rom
Hope it helps
Sent from HTC Explorer powered by Nextgen v1.5
thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..
Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse
No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm
Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise
cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse
thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..
edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:
ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.
So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app
I flashed the latest sense 4.0 rom by apex-predator, followed all the instructions, and it didn't boot. I changed the sd-ext to ext3 as in case of any boot up problem, but to no use. Then I decided to flash stock rom, it didn't work either but earlier everything was working fine in this case, i mean flashing roms, stock and / or custom ones.
Moving over, I installed Xenon Systems rom, it successfully booted but after initial setup it gave my an annoying low internal memory notification, whereby I just completed the initial setup and didn't install any new apps except that came with the rom. It shows about 248 KB or so left.
I am unable to open messages, make phone calls n bla bla that need some memory. FYI, the rom was not overclocked and everything was previously working fine without overclocking as some threads suggest that overclocking may fry the NAND storage.
Looking forward to a positive reply on this issue.
Regards.
Give a try to NAND recovery process by cute prince.
Sent from my HTC Explorer using xda premium
Can you send the link to cute prince's thread, please!!
vikingmax said:
Can you send the link to cute prince's thread, please!!
Click to expand...
Click to collapse
here you go
but before doing process check that you have wiped phone clean via CWM or TWRP ie factory format/reset, format system, dalvik, sd-ext......install a known working rom and check internal space left, if you still have low space issue then following the proceedure in the link below.......use at your own risk
http://forum.xda-developers.com/showpost.php?p=36868966&postcount=2367
LiVeRpOoL-FaN said:
here you go
but before doing process check that you have wiped phone clean via CWM or TWRP ie factory format/reset, format system, dalvik, sd-ext......install a known working rom and check internal space left, if you still have low space issue then following the proceedure in the link below.......use at your own risk
http://forum.xda-developers.com/showpost.php?p=36868966&postcount=2367
Click to expand...
Click to collapse
Here's the deal now. I am using TWRP and I wiped everything you said above. Stock rom is not able to boot, but Xenon System's rom made it through. It still gave low memory notification. I reverse mounted the memory and it worked for now. Showing 1.5 GB as internal memory, as I have allocated that much for sd-ext partition.
What do you suggest now, shall I try cute prince's tutorial, coz I think the above thing is temporary with this rom and low memory issue will come again if I again flash stock rom or some other custom rom.
Regards.
Hi All,
I had rooted my phone a long time back and to clear up some memory i factory reset it. Now i am stuck on the white screen with htc logo . Please tell me what to to . I have no backups as well , as i ended up formatting my memory card while trying to create a partition on it.
When i start the phone in recovery mode this is what i get (Pico CMW-Based Recovery v5.0.2)
Code:
***UNLOCKED***
PICO PVT SHIP S-ON RL
HBOOT - 1.00.0000
RADIO - 1.10.81.17
Sep 29 2011 , 14:22:22
HBOOT
<VOL UP > to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
Please help.
Thanks
http://forum.xda-developers.com/showthread.php?t=2189199 just flash stock zip from here, or flash some custom rom from development sections, next time, read rooting tutorial through the end, and don't do factory reset
works !
shortyoko said:
http://forum.xda-developers.com/showthread.php?t=2189199 just flash stock zip from here, or flash some custom rom from development sections, next time, read rooting tutorial through the end, and don't do factory reset
Click to expand...
Click to collapse
Yes Sir, will read it for sure
Thanks , your answer solved my problem
Now i plan to install the JaggyRom 4.0.3 on my HTC Explorer. Do you think its a good idea ?
I only have a 2GB SD Card , is there any requirement that i have to convert at least 1GB to ext partition before installing the ROM.
Any other things which you would suggest i take care of before proceeding ?
Thanks a lot
Give link to rom which you wan't to install.
Especially Jaggy 4.0.3 was GB with sense 3.5 I THINK, so you don't need 1gb ext, even 512 will do. If it's ICS with sense 4 you need 1gb ext.
My advice: Don't worry if first time it stucks on white htc screen, if this happens, just try wiping everything again and flash again.
And another thing you can download this http://www.mediafire.com/download.php?lim1od8qrjdbblp you flash it before you flash the rom, it wipes everything by it self, I'm not sure how it works with sense 4, but for every athor rom it's fine.
Hi,
sorry not allowed to post the links yet.
androidforums[dot]com/explorer-all-things-root/656605-rom-sense-jaggyrom-4-0-3-12-10-12-a[dot]
please edit the link
I think i shall try this one now, and once i get the knack of it , i'll buy myself a bigger memory card and try ICS
Please let me know if i should go forward with it.
Thanks for the help .
Uff ya, forgot about links restriction, with this one you don't need more than 512mb of ext. Just don't forget to flash 'wi-fi fix' after install and follow the instructions.
With this one you also can use the 'superwipe.zip' that I've posted in the previous post, instead of wiping everything manually, whichever suits you best.
Also if you wan't you can check out cm9, it's ICS and its stable, for it you don't need 1gb ext partition. Well that's it, have fun
shortyoko said:
Uff ya, forgot about links restriction, with this one you don't need more than 512mb of ext. Just don't forget to flash 'wi-fi fix' after install and follow the instructions.
With this one you also can use the 'superwipe.zip' that I've posted in the previous post, instead of wiping everything manually, whichever suits you best.
Also if you wan't you can check out cm9, it's ICS and its stable, for it you don't need 1gb ext partition. Well that's it, have fun
Click to expand...
Click to collapse
Thanks ,
i'll try the JaggyRom and tell you how it goes.
If you want to keep your Rom pure stock then flash the one by immortal_yash with ext support. It's smoother then jaggyrom 4.0.3 for me or you can flash cm9.1 build 14 . It's your choice so try and use the one which is best for you...
Sent from my HTC Explorer A310e using xda app-developers app
Hi,
I have installed the JaggyRom 4.0.3 as of now (will try ICS, next after a while) . What i wanted to know if what next can i do with my phone?
I had created a ext4 partition , but can't see it now. Should i install link2SD ?
Also can i overclock my mobile (rather should i do it ? ) and also can the internal memory be used as RAM
Sorry the questions are pretty novice but then i am one
Thanks for all the help.
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
AlbusDumbelodr said:
Hi,
I have installed the JaggyRom 4.0.3 as of now (will try ICS, next after a while) . What i wanted to know if what next can i do with my phone?
I had created a ext4 partition , but can't see it now. Should i install link2SD ?
Also can i overclock my mobile (rather should i do it ? ) and also can the internal memory be used as RAM
Sorry the questions are pretty novice but then i am one
Thanks for all the help.
Click to expand...
Click to collapse
1. Make ext3 partition
2. Do not overclock... you can /rather will cause permanent damage
3.you don't need to use internal memory as ram ~if you do, it may reduce life of SD card
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
Go to recovery
Wipe cache and dalvik
Fix permissions
Reboot
Wait
cm9 htc a310e
ptcpayme said:
1. Make ext3 partition
2. Do not overclock... you can /rather will cause permanent damage
3.you don't need to use internal memory as ram ~if you do, it may reduce life of SD card
Go to recovery
Wipe cache and dalvik
Fix permissions
Reboot
Wait
cm9 htc a310e
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
What i observed was that the phone started restarting after i had run the following command (to enable ext4 to be used as part of internal memory):
Code:
su
m2sd rmount enable
so i again ran
Code:
su
m2sd rmount disable
after which it stopped restarting. Any pointers what could be the reason for this ? I have a 2GB card, not sure which class , but since it came with the phone i believe it should be class 2 or class 4
Type in terminal emulatur 'm2sd status'
It will show what is enabled, answers will come.
And did you used superwipe.zip, or manually wiped everything. And normally it's better ext partition to be ext2 or ext3.
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
Well have you removed the sd card while the phone was on?.....If thats the case then you may have to reflash the rom....
Also download roms from xda itself because it is posted by the original devs themselves and you get better support.
Consider using jaggy 4.1 by me....
http://forum.xda-developers.com/showthread.php?t=1930175
shortyoko said:
Type in terminal emulatur 'm2sd status'
It will show what is enabled, answers will come.
And did you used superwipe.zip, or manually wiped everything. And normally it's better ext partition to be ext2 or ext3.
Click to expand...
Click to collapse
This is what i get :
Status
----
* Mounts2SD [loaded]
- Apps [loaded]
- Data []
- Dalvik[loaded]
- CmDalvik[]
- Cache[]
- Swap []
- Rmount[]
Device info :
* SD-EXT device [/dev/block/mmcblk0p2]
* Swap device[]
Locations :
* Cache[]
I used superwipe.zip
What do you suggest i do next ?
Thanks.
abhinavthms said:
Well have you removed the sd card while the phone was on?.....If thats the case then you may have to reflash the rom....
Also download roms from xda itself because it is posted by the original devs themselves and you get better support.
Consider using jaggy 4.1 by me....
http://forum.xda-developers.com/showthread.php?t=1930175
Click to expand...
Click to collapse
No i did not.
After i ran this
Code:
m2sd rmount disable
the phone stopped restarting.
Okies , i'll try jaggy 4.1 ,
but are there any limitations of the memory card that i have to take care of ?
And will i loose the data again ?
Thanks.
Edit : Not sure if its releavant, but i can't connect to the memory card by using the "Disk Mode" from the mobile.
Can someone shed some light on the differences between JaggyRom and cm ??
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
flash new recovery http://forum.xda-developers.com/showthread.php?t=2168725
i recommend the 1 above
try cyanogenmod 10 or 9 whatever you want
flash proper gapps
if you want to increase internal memory go here -> http://forum.xda-developers.com/showthread.php?t=1932874
------------------------------------------------------------------------------------------------------------------------------------------------------------
Dont forget to hit thanks !!!
The1sameer said:
flash new recovery http://forum.xda-developers.com/showthread.php?t=2168725
i recommend the 1 above
try cyanogenmod 10 or 9 whatever you want
flash proper gapps
if you want to increase internal memory go here -> http://forum.xda-developers.com/showthread.php?t=1932874
------------------------------------------------------------------------------------------------------------------------------------------------------------
Dont forget to hit thanks !!!
Click to expand...
Click to collapse
I am thinking of installing this (TWRP) :
http://forum.xda-developers.com/showthread.php?t=1911242
I am currently on CMW-Based Recovery v5.0.2
AlbusDumbelodr said:
I am thinking of installing this (TWRP) :
http://forum.xda-developers.com/showthread.php?t=1911242
I am currently on CMW-Based Recovery v5.0.2
Click to expand...
Click to collapse
Yeah even i m using twrp :thumbup:
----------------------------
There is a Thanks button
and
it is meant to be clicked
Ok so maybe you have a HTC explorer in 2k16 and you want itto work with performance and you want some cool apps in it too. Well you came to the right place.
First off do all of this on your own risk am not responsible for any damage to your phone
Now stuff i be talking about in this thread are following
1. Best custom os
2. Recommended stuff
1.CUSTOM OS
The best custom os for the HTC pico is mini cm9 there is no doubt about it. i will provide the link but first let me tell you all about it and screenshots will be provided too.
Its light weight and it is all on nand. Performance is its other name
http://forum.xda-developers.com/showthread.php?t=1958152
2.RECOMMENDED STUFF
ok so now we will talk about stuff to do after installing the os. First thing you want is internal memory.
before that make sure you have a ext partition on your sd card minimum 1 gb and i recommend you to use a class 10 sd card after that go to http://forum.xda-developers.com/showthread.php?t=2389501 this thread download the 40int2ext and follow instructions. Thats all for recomendations
Now let me tell you what apps am using on this rom
1. youtube
2. facebook lite
3. whatsapp
4. fb messenger
5. dr,driving
6. subway surfer
7. temple run
8. dead trigger
rest you can try for yourself
i hope i helped you and if like this rom and that script plz donate to their real owners... :good::good::good:
G(oogle)Apps
what gapps package did you use, because a package i found on the internet did not work.
I really wanna breathe new life in this phone
Thanks for this awesome thread.
One thing I never understood in those scripts, should I format my sdcard first? In recovery? In a pc (using for example mini tool partiton wizard)?
What partition scheme do you recomend?
So far I have a 4Gb SD-Card but I may buy a 8Gb Class 10 one.
Partition
skinniezinho said:
Thanks for this awesome thread.
One thing I never understood in those scripts, should I format my sdcard first? In recovery? In a pc (using for example mini tool partiton wizard)?
What partition scheme do you recomend?
So far I have a 4Gb SD-Card but I may buy a 8Gb Class 10 one.
Click to expand...
Click to collapse
Just have one partition(sd-ext4) which will be your internal memory.
Just make sure you have formatted sd card and make partition.
Install the rom and flash the script on top of it (try int2ext).
It will increase if you follow the OP.
jmsrajkumar said:
Just have one partition(sd-ext4) which will be your internal memory.
Just make sure you have formatted sd card and make partition.
Install the rom and flash the script on top of it (try int2ext).
It will increase if you follow the OP.
Click to expand...
Click to collapse
Tried before with ext3 and ext4 partition and in recovery it says installation aborted.
Do you think it is because of partition or recovery? philz touch recovery.
PrivaaatCharlie said:
what gapps package did you use, because a package i found on the internet did not work.
I really wanna breathe new life in this phone
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=22979706399755109 these worked for me i hope i helped...... kill the thanks button
skinniezinho said:
Thanks for this awesome thread.
One thing I never understood in those scripts, should I format my sdcard first? In recovery? In a pc (using for example mini tool partiton wizard)?
What partition scheme do you recomend?
So far I have a 4Gb SD-Card but I may buy a 8Gb Class 10 one.
Click to expand...
Click to collapse
no you dont need to do anything beside make a backup of your files if you already dont have a sd ext just place the file and enjoy..... but if you dont have sd ext just get a sd card of class 6 or above boot into recovery go to advanced and partition sd card my recomended size is 2 gb... thats it... kill the thanks button if i helped
skinniezinho said:
Tried before with ext3 and ext4 partition and in recovery it says installation aborted.
Do you think it is because of partition or recovery? philz touch recovery.
Click to expand...
Click to collapse
bro dont flash in recovery you have to paste the file from that zip to system/etc/intd and then change permission and reboot
you can do this b using root browser.... good luck and kill the thanks button
haxorksf said:
bro dont flash in recovery you have to paste the file from that zip to system/etc/intd and then change permission and reboot
you can do this b using root browser.... good luck and kill the thanks button
Click to expand...
Click to collapse
Thanks, working fine now.
Regardless of which ROM or recovery i'm on, my device reboots randomly after some times(even after a thorough clean flash). Tried almost all of the ROMs .....but nothing worked. Posted my problems in other appropriate threads too.....but didn't get any reply. Finally tried mini Cm9.......but still it has random reboots.........any help is appreciated :good::good::good:
KingOfCosmos said:
Regardless of which ROM or recovery i'm on, my device reboots randomly after some times(even after a thorough clean flash). Tried almost all of the ROMs .....but nothing worked. Posted my problems in other appropriate threads too.....but didn't get any reply. Finally tried mini Cm9.......but still it has random reboots.........any help is appreciated :good::good::good:
Click to expand...
Click to collapse
ok random reboots i once had them too there are two reasons for this problem and there are two solutions so dont worry
1. problem with batery:
pull out the back case and clean the battery terminals with alcohol and do the same with terminals on phone. now without putting the battery in press the power button for 10sec after that put the battery back in and voila nomore reboots.
if not then continue
2. problem with kernal:
it can also be caused by a faulty kernal so i will recomend that you flash a custom kernal. and to be frank try one of arsalan kirmani kernals those are stable
hope i helped :good::good::good:
haxorksf said:
ok random reboots i once had them too there are two reasons for this problem and there are two solutions so dont worry
1. problem with batery:
pull out the back case and clean the battery terminals with alcohol and do the same with terminals on phone. now without putting the battery in press the power button for 10sec after that put the battery back in and voila nomore reboots.
if not then continue
2. problem with kernal:
it can also be caused by a faulty kernal so i will recomend that you flash a custom kernal. and to be frank try one of arsalan kirmani kernals those are stable
hope i helped :good::good::good:
Click to expand...
Click to collapse
I've tried different kernels in the past...but none helped....can you suggest one specifically ?? I only have a 4 gb memory card....so creating 3 partitions is not a good idea. I mostly rely on ICS ROMs. So any suggestions ?
KingOfCosmos said:
I've tried different kernels in the past...but none helped....can you suggest one specifically ?? I only have a 4 gb memory card....so creating 3 partitions is not a good idea. I mostly rely on ICS ROMs. So any suggestions ?
Click to expand...
Click to collapse
Try without memory card. In the past I had one Nokia with problems like you describe and it was the memory card.
I had 4gb Class 4 with Fat32 and EXT partition without problems. Now I just upgraded to 32Gb Class10 for 9eur because I mainly use my explorer as mp3 player.
Using this rom http://forum.xda-developers.com/showthread.php?t=1876466 (MIUI cm9 based) with int2ext like this thread suggests and it is ok
skinniezinho said:
Try without memory card. In the past I had one Nokia with problems like you describe and it was the memory card.
I had 4gb Class 4 with Fat32 and EXT partition without problems. Now I just upgraded to 32Gb Class10 for 9eur because I mainly use my explorer as mp3 player.
Using this rom http://forum.xda-developers.com/showthread.php?t=1876466 (MIUI cm9 based) with int2ext like this thread suggests and it is ok
Click to expand...
Click to collapse
I really like that MIUI ROM.....but that one also has random reboots
Tried it without memory card too....many times...........i think the problem is with something else
KingOfCosmos said:
I really like that MIUI ROM.....but that one also has random reboots
Tried it without memory card too....many times...........i think the problem is with something else
Click to expand...
Click to collapse
Maybe hardware, or try to update Radio or something...
KingOfCosmos said:
I really like that MIUI ROM.....but that one also has random reboots
Tried it without memory card too....many times...........i think the problem is with something else
Click to expand...
Click to collapse
MIUI rom is good, it don't have any problem of random reboots.. it is hardware problem... or try 2.3.5 android roms once.. before that format sd card and make perfect partition then change to default recovery and wipe everything which are necessary then flash a rom.. it may or may not works but give a try..
prashanth velpula said:
MIUI rom is good, it don't have any problem of random reboots.. it is hardware problem... or try 2.3.5 android roms once.. before that format sd card and make perfect partition then change to default recovery and wipe everything which are necessary then flash a rom.. it may or may not works but give a try..
Click to expand...
Click to collapse
Bro, currently which MIUI version ROM your are using for daily driver.
jmsrajkumar said:
Bro, currently which MIUI version ROM your are using for daily driver.
Click to expand...
Click to collapse
i'm using MIUI v4 for HTC EXPLORER/PICO REVISED EDITION [FASTEST & SMOOTHEST ROM].. it works good for me but usb cable don't works because i'm using mount2sd script (no need to configure)..
prashanth velpula said:
i'm using MIUI v4 for HTC EXPLORER/PICO REVISED EDITION [FASTEST & SMOOTHEST ROM].. it works good for me but usb cable don't works because i'm using mount2sd script (no need to configure)..
Click to expand...
Click to collapse
Thanks Bro :good:
dude do that battery cleaning stuff i told u about it will fix your problem