I tried installing Cromi-x, and I am currently stuck on the install screen for Cromi-X. It says its at 100%, and has the All Done! message but does not advance to any other screens. There are no options to advance. Any ideas??
foster6a said:
I tried installing Cromi-x, and I am currently stuck on the install screen for Cromi-X. It says its at 100%, and has the All Done! message but does not advance to any other screens. There are no options to advance. Any ideas??
Click to expand...
Click to collapse
It is probably frozen. Try to hold the power button for ten seconds forcing it to hard reset.
It's a rare bug in the aroma installer. Luckily the next version will be using Aroma 2.7 which fixes this bug as well as others. In this case just force restart it - you may need to reflash the file to get it to take properly.
Forcing the restart helped. No need to re-flash. Thanks for the help!!
Related
Hi,
I rebooted my sensation and after around an hour the CM boot screen just froze. I tried rebooting it again and it did the same.
Ive now factory reset it and when running through the initial setup it gets to to the section where you select the time and date etc. then the setup says it has crashed. After pressing force close I just get a black screen with the notifcation bar at the top and im unable to do anything?
Can anyone help with this?
Thanks
Tom
are you still s-off right? so wipe all and flash the rom again
tombullock92 said:
Hi,
I rebooted my sensation and after around an hour the CM boot screen just froze. I tried rebooting it again and it did the same.
Ive now factory reset it and when running through the initial setup it gets to to the section where you select the time and date etc. then the setup says it has crashed. After pressing force close I just get a black screen with the notifcation bar at the top and im unable to do anything?
Can anyone help with this?
Thanks
Tom
Click to expand...
Click to collapse
Are you using a factory or custom ROM?
matt95 said:
are you still s-off right? so wipe all and flash the rom again
Click to expand...
Click to collapse
Sorted
The CM7 ROM I had saved on my SD card did the same thing but I redownloaded it and it worked!
Thanks!
So i'm using the AOKP Milestone 6 ROM and I recently installed a version of ClockworkMod Recovery and now every time I reboot, the background is black. Once I unlock the screen, a message pops up and says "System is not responding" and it asks to Wait, Report or OK. Once I hit OK, it proceeds to close System (I assume) and restores my phone normally. It seems to freeze every now and then in Settings once I select any of the menus every now and then, but other than that it's fine.
Also, I updated ClockworkMod Recovery from one of Sk8er's threads and it still seems to do the exact same. I've Fixed Permissions from the ROM Manager app and inside of Recovery mode. I really do not want to re-install this mod as i've spent hours and hours customizing it to my liking.
Any help would be greatly appreciated!
Serfma said:
So i'm using the AOKP Milestone 6 ROM and I recently installed a version of ClockworkMod Recovery and now every time I reboot, the background is black. Once I unlock the screen, a message pops up and says "System is not responding" and it asks to Wait, Report or OK. Once I hit OK, it proceeds to close System (I assume) and restores my phone normally. It seems to freeze every now and then in Settings once I select any of the menus every now and then, but other than that it's fine.
Also, I updated ClockworkMod Recovery from one of Sk8er's threads and it still seems to do the exact same. I've Fixed Permissions from the ROM Manager app and inside of Recovery mode. I really do not want to re-install this mod as i've spent hours and hours customizing it to my liking.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
you have no choice but to wipe/reset then install backup or reflash rom
Not too sure what I've done, but it's back to normal now!
Sent from my SGH-I727
The title pretty much says it. I've been trying to flash Axis since last night and once it hits 100% I hit the next button..it vibrates, then completely freezes. I wiped dalvik, system, and full data each time i've tried it. Didnt know what to do so I tried to restore it..and then it gets stuck on the LiquidSmooth boot screen. I'm a noob at this rom stuff so I dont really know what else to do and its stressing me out. please help!
Aroma can be a bit finicky. I have had to battery pull several times during an aroma install. Just be persistent is about all I can suggest. I haven't heard of ant tricks that helps.
Sent from my GT-P5113 using xda premium
I'm on the PAC ROM. Always worked great, with some minor issues. Today, I received a message on Whatsapp and, suddenly, trying to open it, both from the notification drawer and from the app drawer, caused phone to reboot. I tried killing the process from settings, it rebooted before loading all the running apps. After that, I've not been able to run anything without causing a reboot. Why is that and how can it be solved?
EDIT: I understood it is Smart App Protector's fault: every app works fine except that and all the locked apps. Trying to uninstall or stop it causes the phone to reboot, as well. Any idea on how to solve this?
Try wipe data/factory reset.
if the problem remains unsolved:
re-flash your rom (clean flash).
you can backup your data through recovery.
regards
ASMI1 said:
Try wipe data/factory reset.
if the problem remains unsolved:
re-flash your rom (clean flash).
you can backup your data through recovery.
regards
Click to expand...
Click to collapse
Thank you very much, it works now. But Google Play is stuck on the loading screen... Any solution to avoid reflashing?
EDIT: Nevermind, it is magically running again.
Pkmns said:
Thank you very much, it works now. But Google Play is stuck on the loading screen... Any solution to avoid reflashing?
EDIT: Nevermind, it is magically running again.
Click to expand...
Click to collapse
Yup, this is because Google play have to update itself and change interface directly after each data wipe
best regards
First off, im a newbie.
I just installed Alpha 5 cm 11 kitkat from yajnab. Gapps didnt work so I flashed them, then I found out that they were wrong gapps, then I panicked and reinstalled my cm 11, but on welcome screen it keeps saying "android keyboard (aosp) has stopped" I can't do anything, I tried to reinstall cm multiple times and tried to reflash gapps with proper version, but I still can't get past welcome screen. Did i just "Brick" my fit? ((
glaciax said:
First off, im a newbie.
I just installed Alpha 5 cm 11 kitkat from yajnab. Gapps didnt work so I flashed them, then I found out that they were wrong gapps, then I panicked and reinstalled my cm 11, but on welcome screen it keeps saying "android keyboard (aosp) has stopped" I can't do anything, I tried to reinstall cm multiple times and tried to reflash gapps with proper version, but I still can't get past welcome screen. Did i just "Brick" my fit? ((
Click to expand...
Click to collapse
Did you wipe everything before flashing?
goto mount & storage format system. format cache, format data.
install cm11 and then try to boot
Which gapps are you using btw?
Harpratap said:
Did you wipe everything before flashing?
goto mount & storage format system. format cache, format data.
install cm11 and then try to boot
Which gapps are you using btw?
Click to expand...
Click to collapse
I wiped after flashing, but I tried with wiping before too.
Also I didn't make backup
I'm using mini-gapps-cm11-20140317 now
But I didn't wipe from mount & storage, i wiped from main screen.
Thanks for help, Im flashing now, I will update this post when it is done
Ok, no more "android keyboard aosp stopped" but I still can't get past welcome screen, it says Welcome and i have to choose a language, and whatever i press it doesnt react? :/
edit: and home button doesn't work. my phone is gt-s5670 and i downloaded alpha 5 from here http://forum.xda-developers.com/showthread.php?t=2581415
is it maybe wrong android version? Im desperate now
edit2: everything works now, i found out that i couldn't get past welcome screen is because my screen was too small, so i needed to just flip screen horizontally to see > button... -.-
edit3: after i finish with setup wizard, it says unfortunately, setup wizard has stopped.. ok im really sad now
edit4: yay fixed everything. do you have gapps to recommend to me?
glaciax said:
Ok, no more "android keyboard aosp stopped" but I still can't get past welcome screen, it says Welcome and i have to choose a language, and whatever i press it doesnt react? :/
edit: and home button doesn't work. my phone is gt-s5670 and i downloaded alpha 5 from here http://forum.xda-developers.com/showthread.php?t=2581415
is it maybe wrong android version? Im desperate now
edit2: everything works now, i found out that i couldn't get past welcome screen is because my screen was too small, so i needed to just flip screen horizontally to see > button... -.-
edit3: after i finish with setup wizard, it says unfortunately, setup wizard has stopped.. ok im really sad now
edit4: yay fixed everything. do you have gapps to recommend to me?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2699221
glaciax said:
Ok, no more "android keyboard aosp stopped" but I still can't get past welcome screen, it says Welcome and i have to choose a language, and whatever i press it doesnt react? :/
edit: and home button doesn't work. my phone is gt-s5670 and i downloaded alpha 5 from here http://forum.xda-developers.com/showthread.php?t=2581415
is it maybe wrong android version? Im desperate now
edit2: everything works now, i found out that i couldn't get past welcome screen is because my screen was too small, so i needed to just flip screen horizontally to see > button... -.-
edit3: after i finish with setup wizard, it says unfortunately, setup wizard has stopped.. ok im really sad now
edit4: yay fixed everything. do you have gapps to recommend to me?
Click to expand...
Click to collapse
How did you fix it?