Related
I can`t flash any recovery normally, I fear I messed up the cache\recovery seriously .
First I tried to flash ICS OTA – didn’t work, I was revolutionary S-off, after a few times I gave up (rebooting successful by reason: oem).
I re-flashed the RUU, and it went back to Pyrmid S-on. I`ve unlocked the bootloader HTC way.
Then tried to flash CWM, but I got some sort of error. Then I`ve installed "Android Recovery Manager". Tried to flash CWM through it, but ergh – it hangs on "waiting for device"
I tried to fastboot devices & fastboot getvar cid and got corret results, but when i`ve tried to change to superCid – I got this message:
C:\adb>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO pyramid_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.076s]
finished. total time: 1.076s
so, I realized something went terribly wrong somewhere.
I`m looking for a "fresh start" – is there any complete clone of the recovery file system? Or any other way to flash a complete recovery file system (odin ?!)
Please help.
specs:
sensation xe
Cid htc__001, Mid
recovery: android system recovery <3e> (with error message "can't open /cache/recovery/command)
Hboot: "unloacked", 1.18, S-on (yes, S-on)
yonirapa said:
I can`t flash any recovery normally, I fear I messed up the cache\recovery seriously .
First I tried to flash ICS OTA – didn’t work, I was revolutionary S-off, after a few times I gave up (rebooting successful by reason: oem).
I re-flashed the RUU, and it went back to Pyrmid S-on. I`ve unlocked the bootloader HTC way.
Then tried to flash CWM, but I got some sort of error. Then I`ve installed "Android Recovery Manager". Tried to flash CWM through it, but ergh – it hangs on "waiting for device"
I tried to fastboot devices & fastboot getvar cid and got corret results, but when i`ve tried to change to superCid – I got this message:
C:\adb>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO pyramid_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.076s]
finished. total time: 1.076s
so, I realized something went terribly wrong somewhere.
I`m looking for a "fresh start" – is there any complete clone of the recovery file system? Or any other way to flash a complete recovery file system (odin ?!)
Please help.
specs:
sensation xe
Cid htc__001, Mid
recovery: android system recovery <3e> (with error message "can't open /cache/recovery/command)
Hboot: "unloacked", 1.18, S-on (yes, S-on)
Click to expand...
Click to collapse
If I am not mistaken, you need S-Off to flash recovery.
tingtan said:
If I am not mistaken, you need S-Off to flash recovery.
Click to expand...
Click to collapse
You are correct sir.
Sent from my HTC Sensation 4G with Beats Audio using xda premium
tingtan said:
If I am not mistaken, you need S-Off to flash recovery.
Click to expand...
Click to collapse
He does have s-off he said he unlocked it the htc way so it might be something else..
Sent from my HTC Sensation Z710e using xda premium
Run ruu and start over
Ruu will not put s on
Sent from my HTC Sensation 4G using xda premium
Catch 22...
Hi thanks for trying.
well revolutionary hangs on waiting for device.
ruu fails on error 155 - unknwon error.
any ideas?
yonirapa said:
Hi thanks for trying.
well revolutionary hangs on waiting for device.
ruu fails on error 155 - unknwon error.
any ideas?
Click to expand...
Click to collapse
Relock bootloader to flash RUU
i`m telling you - this isn`t a normal solution question
well, no.
so much for trying to lock s-on
C:\ADB>fastboot oem lock
... INFOLock successfully...
INFOTZ_HTC_SVC_DISABLE ret = 66977136 (0x3FDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.936s
WTF ?
any more ideas?
thanks
Don't apply s on, you need to run the correct ruu.for your cid.
Flashing RUU does not make you s on. If you're s on you had to make it that way.
Bad news is you can't run RUU with s on.
Sent from my HTC Sensation 4G with Beats Audio using xda premium
Okay so i was attempting to relock my bootloader to RUU 1.85 agian and i ran the "fastboot oem lock" and this is the cmd output:
C:\Users\kenny>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642040 (0x1FDDFD78)
FAILED (status read failed (Too many links))
finished. total time: 0.936s
but now on my bootloader at the top it reads
*** Security Warning ***
is this something i should worry about??
im new to the phones with bootloaders bc none of my previous ones had them, if someone could tell me what is going on i would greatly appreciate it!!
I dont want a BRICK! :/
android4ever91 said:
Okay so i was attempting to relock my bootloader to RUU 1.85 agian and i ran the "fastboot oem lock" and this is the cmd output:
C:\Users\kenny>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642040 (0x1FDDFD78)
FAILED (status read failed (Too many links))
finished. total time: 0.936s
but now on my bootloader at the top it reads
*** Security Warning ***
is this something i should worry about??
im new to the phones with bootloaders bc none of my previous ones had them, if someone could tell me what is going on i would greatly appreciate it!!
I dont want a BRICK! :/
Click to expand...
Click to collapse
I saw that on my phone too. Once I flashed the RUU it went away. In my case I think I had it because I was running Clean Rom which I THINK has an unsecured boot image.
gunnyman said:
I saw that on my phone too. Once I flashed the RUU it went away. In my case I think I had it because I was running Clean Rom which I THINK has an unsecured boot image.
Click to expand...
Click to collapse
thanks for the info man, i too was running clean rom so thats probably why! ha also before i even booted back up i rebooted bootloader again and it went away!
same thing happened to me but when I was attempting to relock to downgrade and now i cant get back into my phone or recovery. it keeps going straight to the bootloader.. do i have to rerun the ruu? please heeellpp
bryyte said:
same thing happened to me but when I was attempting to relock to downgrade and now i cant get back into my phone or recovery. it keeps going straight to the bootloader.. do i have to rerun the ruu? please heeellpp
Click to expand...
Click to collapse
yes you need to run the RUU just choose fastboot from the bootloader screen and it should work just fine
Hi
I was trying for root
http://forum.xda-developers.com/showthread.php?t=1583427
but I ended on point 2.
I tried flash all recovery from CWM and from Paul too, but nothing heppend, recovery don't work. It write:
This build is for development purposes only Do not distribute outside of HTC without HTC´s written permission. Failure to comply may lead to
legal action.
and that is all, ONE S not respond, only restart to HBOOT and bootloader. Probably I can't flash CWM.
I have new model :
***UNLOCKED***
VILLEC2 PVT SHIP S-ON RL
HBOOT-2.09.0001
RADIO-16.05.20.16_M2
OpenDSP-v05.6.0.2226.00.0418
eMMC-boot
May 10 2012, 17:19:49
I flashed the kernel with program "One_S_All-In-One_Kit_v1.0" and I just stayed in HBOOT, system isn't work.
When I was trying flash original "RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.109_Radio_16.12.20.02U_16.05.20.16_M2_release_263131_signed.exe"
it reported error 155 -it means little memory in internal storage, and nothing heppend
When I was trying flash ramdisk with fastboot, it wrote:
c:\Program Files\Android\android-sdk\platform-tools>fastboot boot ramdisk.img
creating boot image...
creating boot image - 307200 bytes
downloading 'boot.img'...
OKAY [ 0.240s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 0.257s
I have worked on it for two day
Please, HELP me! Thx
**Sorry for my english**
error 155 can mean several things.
Try to run the RUU from fastboot, That usually clears up the 155 error
If not, let us know and we will find some other solution.
If you think, launched the phone in fastboot and on PC run RUU so it's the same, error 155.
ICS doesn't work so device stay in HBOOT and fastboot.
Have you relocked the bootloader before running the RUU ??
RUU's wont work unless bootloader is locked, To lock it open a command window, navigate to the location of all your adb / fastboot files and type:
fastboot oem lock
Then run the RUU again
I do it but fastboot in PC wrote:
c:\Program Files\Android\android-sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 268303736 (0xFFDFD78)
FAILED (status read failed (Too many links))
finished. total time: 0.936s
And on phone is:
*** RELOCKED ***
*** Security Warning ***
flash ruu rom instaled ok THANKS YOU i am happy
and one question: how i made bad under root my device?
i need make root my phone. not like made bad think my device
thx
unlock bootloader, Flash CWM in fastboot https://dl.dropbox.com/u/69014495/cwmrecovery.img
Boot into recovery and flash root package twice https://dl.dropbox.com/u/69014495/CWN-SuperSU-v0.87.zip
Then all done you are rooted, Enjoy flashing some customs ROMs
so all make for guide but device show error after flash cwmrecovery.img under fastboot adb
writhing this:
This build is for development purposes only Do not distribute outside of HTC without HTC´s written permission. Failure to comply may lead to legal action.
what next?
ICS is running
recovery not running
This way works?
http://forum.xda-developers.com/showthread.php?t=1577831
I have tried does not work
thx
HY, I'm finding the RRU pro HTC ONE S with CID TIM__401.
My phone is bricked in this situation,
*** TAMPERED ***
*** RELOCKED ***
VLE PUT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.16.31501S.17_2
OpenDSP-v21.1.032.0314
eMMC-boot
Mar 15 2012, 23:37:23
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
when I try to using fastboot command the response is:
fastboot flash recovery recovery.img
sending 'recovery' (5742 KB)... OKAY [ 1.040s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.490s
Help me please
Roberto
BOB0660 said:
HY, I'm finding the RRU pro HTC ONE S with CID TIM__401.
My phone is bricked in this situation,
*** TAMPERED ***
*** RELOCKED ***
VLE PUT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.16.31501S.17_2
OpenDSP-v21.1.032.0314
eMMC-boot
Mar 15 2012, 23:37:23
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
when I try to using fastboot command the response is:
fastboot flash recovery recovery.img
sending 'recovery' (5742 KB)... OKAY [ 1.040s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.490s
Help me please
Roberto
Click to expand...
Click to collapse
Well , first of all unlock your bootloader >>> says very clear there >>> *** TAMPERED *** then under that *** RELOCKED *** .
Once you unlocked it ... check this post here >> http://forum.xda-developers.com/showthread.php?t=1543588 and get a rom for your device .
From what says in your post , Mar 15 2012 and versions of HBOOT , Radio , etc ... my guess is that RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S would be fine for you .
I'm not sure if your CID will be a problem to write another recovery image so download that rom version and get from it what you need ( recovery , etc ) . Even so ... i think you should be able to flash TWRP 2.2.0 recovery and use a custom ROM ( TrickDroid 7.0 for example ) .
If need , you can also change your CID to Super CID ... this would alllow ya to write any rom ... check this post for more info >> http://forum.xda-developers.com/showthread.php?t=1671396 .
Yes CID would be a problem, i've changed it to HTC__001 to load the europe ruu...
(I had a tim branded one s too)
Not able to change CID
Alie360 said:
Yes CID would be a problem, i've changed it to HTC__001 to load the europe ruu...
(I had a tim branded one s too)
Click to expand...
Click to collapse
tanks for the info, but i'm not able to change the ID because my cell is not on line.
when i start ADB SHELL it respond ERROR: DEVICE NOT FOUND also some FASTBOOT command give me the same problem.
Sorry for my english
Roberto
BOB0660 said:
tanks for the info, but i'm not able to change the ID because my cell is not on line.
when i start ADB SHELL it respond ERROR: DEVICE NOT FOUND also some FASTBOOT command give me the same problem.
Sorry for my english
Roberto
Click to expand...
Click to collapse
ADB only works if phone is booted or booting and ADB is activated in settings on the phone, and in a custom recovery like CWM.
Fastboot only works in bootloader mode, when it says FASTBOOT just like when you first tried flashing that recovery.img. Test with
Code:
fastboot devices
Your command was correct but it failed because your bootloader was relocked like Equlibryum said. Try unlocking it again with
Code:
fastboot oem unlock
if it doesnt work you have to unlock again. I believe you can van reuse the Unlock_code.bin HTC emailed you the first time e.g.
Code:
fastboot flash unlocktoken Unlock_code.bin
Not sure if you have to be in any special mode to run the RUU, if memory serves me right either just at homescreen on booted phone or in bootloader.
Also you need only fastboot access to change CID.
To use adb you have to enable "debug usb" in developer options (opzioni sviluppatore->debug usb)
Then connect the phone to your pc (it must be on), open cmd and use the command
Code:
adb devices
to see if the phone is effectively connected
Also remember when you change CID you have to request another unlock_code from htcdev
ADB problem
Alie360 said:
To use adb you have to enable "debug usb" in developer options (opzioni sviluppatore->debug usb)
Then connect the phone to your pc (it must be on), open cmd and use the command
Code:
adb devices
to see if the phone is effectively connected
Also remember when you change CID you have to request another unlock_code from htcdev
Click to expand...
Click to collapse
ADB doesn't work, I'm not able to start my ONE S for setting debug usb
>adb devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Thanks for helpme
Roberto
Then unlock the bootloader, flash a custom recovery and then a custom rom, i sugguest you trickdroid (stable and looks like the stock one).
If you are unconfortable using cmd you should use this: http://forum.xda-developers.com/showthread.php?t=1604677
After that your phone should boot fine.
Then if you want you can change your CID through adb and install the ruu or simply keep trickdroid.
PS: if you want to give thanks, hit the thanks button
also uncheck fastboot under settings/power on phone
and do you have all your drivers/files for fastboot/adb installed in your fastboot.exe folder
make sure you are in that folder in command window for fastboot commands to work and booted into fastboot on phone
as mentioned on adb just be booted in to phone OS
ONE S brick
rugmankc said:
also uncheck fastboot under settings/power on phone
and do you have all your drivers/files for fastboot/adb installed in your fastboot.exe folder
make sure you are in that folder in command window for fastboot commands to work and booted into fastboot on phone
as mentioned on adb just be booted in to phone OS
Click to expand...
Click to collapse
I can't uncheck fastboot under settings/power my phone start only in bootloader and don't go in recovery.
I'm not able to use the ADB or FASTBOOT command because the the device is NOT CONNECT, but the driver and the sofware are correctly installed. I think the only way for resolve in the correct RRU for TIM__401 but is impossible to find it.
bye
Roberto
BOB0660 said:
I can't uncheck fastboot under settings/power my phone start only in bootloader and don't go in recovery.
I'm not able to use the ADB or FASTBOOT command because the the device is NOT CONNECT, but the driver and the sofware are correctly installed. I think the only way for resolve in the correct RRU for TIM__401 but is impossible to find it.
bye
Roberto
Click to expand...
Click to collapse
I believe in order to change your CID you need ADB. got a classic chicken or egg situation here.
I believe the only way you could get this to work is to get fastboot to work. then you could unlock bootloader, and install recovery and rom as they said already. Sometimes you have to try your phone in a different usb port so windows will be forced to reinstall the drivers or you need to delete the drivers from device manager and try again
Can not DO SUPERCID
my htc one s was offical system till i OTA 4.1.1
now HBOOT:2.15 BASEBAND:1.11.50.05.28_10.27.50.08L CID:TIM__401
and UNLOCKED root
but ever I do the supercid the result often still TIM__401
I did cry even 10+
what can I do this?
who can give me some suggestion?
Doggydude said:
get fastboot to work. then you could unlock bootloader, and install recovery and rom as they said already.
Click to expand...
Click to collapse
This is your solution...forget the ruu.
HTC_One_S | S-OFF | Root_Box | Bubba_3.7b_SoftOV
So i dont know what happend, i succesfully make my hox S-OFF, use the phone and everything was working fine, then a try to downgrade my bootloader with Jet but everything went wrong from there, the process didnt finish, i try to relocked my bootloader to install the 2.20 RUU thinking it would fix it but know the RUU procesos finishes with a 131 error because my cid is diferent, this is what i have:
******tampered*****
******relocked******
jewel pvt ship s-off rl
cid-spcs_001
hboot-1.14.0002
radio-0.19as.32.09.11_2
opendsp-v29.1.0.45.0622
emmc-boot
I can put fastboot commands but its shows FAILED (remote: not allowed), i cant go into recovery, also on jet i cant go into QHSUSB_DLOAD anymore.
You really didn't need to downgrade being you were s-off.............
Sent from my HTC One X using Tapatalk 2
Did you try this command to unbrick?: sudo ./jet -u
Edit: hmm just noticed your cid changed to stock. Sorry idk where to go from there
Sent from my HTC One X using xda premium
Yes i did try the ./jet -u command but i cant get in to QHSUSB_DLOAD anymore that is the stock cid for the one x ? if thats the case maybe i can run de 1.85 RUU?
pikul said:
i cant get in to QHSUSB_DLOAD anymore
Click to expand...
Click to collapse
Did you try the hardware key way? Same as bootloader, but power and vol +
Practically gave myself a heart attack yesterday. Someone here was having trouble getting into bootloader, and mentioned power and vol +. I couldn't remember what that did (knew it wasn't bootloader) so I did it, and put the phone in Qualcomm download mode!
I was able to get back to bootloader, recovery, and reflashed the ROM that happened to be on my phone.
No. What I meant was your cid isn't supercid anymore. And I wouldn't use that RUU since your hboot is 1.14; wait till someone more experienced helps you out
Sent from my HTC One X using xda premium
redpoint73 said:
Did you try the hardware key way? Same as bootloader, but power and vol +
Practically gave myself a heart attack yesterday. Someone here was having trouble getting into bootloader, and mentioned power and vol +. I couldn't remember what that did (knew it wasn't bootloader) so I did it, and put the phone in Qualcomm download mode!
I was able to get back to bootloader, recovery, and reflashed the ROM that happened to be on my phone.
Click to expand...
Click to collapse
I guess i could run the ./jet -u command and press those keys, its that what you mean?
panda_mode said:
No. What I meant was your cid isn't supercid anymore. And I wouldn't use that RUU since your hboot is 1.14; wait till someone more experienced helps you out
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
ooooooooo :good: at least i can get into bootloader and put fastboot commands, i guess thats something
pikul said:
I guess i could run the ./jet -u command and press those keys, its that what you mean?
Click to expand...
Click to collapse
I've actually never used JET, and not quite sure how it works.
But power and vol + will put the phone in QHSUSB_DLOAD in most situations (nothing to do with JET), if that is all you are trying to do. Similar to how power and vol - boots into bootloader. Just curious if it would still worked in your "bricked" condition.
Are you able to get into fastboot? If so just use stock RUU to get back to stock,
thats the thing, i can get in to fastboot, try to run the 2.20 RUU starts and maybe 1 minute later it fails, and gives a ERROR [131] i google it and it seems to be because the cid its not the correct one anyone knows if there its a way to bypass the cid verification?
pikul said:
thats the thing, i can get in to fastboot, try to run the 2.20 RUU starts and maybe 1 minute later it fails, and gives a ERROR [131] i google it and it seems to be because the cid its not the correct one anyone knows if there its a way to bypass the cid verification?
Click to expand...
Click to collapse
http://forum.xda-developers.com/wiki/HTC_One_X
Try this thread. I think there is a way to use the stock recovery and the cid you used to unlock it. May give you some ideas.
AT&T HTC OneX
Andriod 4.1.1
ViperXL
i check all of them, but i just cant get to unlock my bootloader again or flash a different cid, not even flash the recovery, y guess its because i relock my bootloader
pikul said:
i check all of them, but i just cant get to unlock my bootloader again or flash a different cid, not even flash the recovery, y guess its because i relock my bootloader
Click to expand...
Click to collapse
Have you tried to get a new identifier token and unlock the phone to get TWRP again?
http://onexroot.com/one-x-root/how-to-unlock-bootloader-and-root-att-htc-one-xhtc-one-xl/
AT&T HTC OneX
Android 4.1.1
ViperXL
is it posible to get it in bootloader mode? cause thats all i can access :/
Everytime i try to flash a file in fastboot it shows FAILED (remote: not allowed)
pikul said:
is it posible to get it in bootloader mode? cause thats all i can access :/
Click to expand...
Click to collapse
download a ROM.. put it in your fastboot folder,
boot into fastboot and try this
fastboot flash zip name_of_rom.zip <-- this works with HTC RUUs, may work with an actual ROM.. Use at your own risk, I have never tried it with a custom ROM.
mirGantrophy said:
download a ROM.. put it in your fastboot folder,
boot into fastboot and try this
fastboot flash zip name_of_rom.zip <-- this works with HTC RUUs, may work with an actual ROM.. Use at your own risk, I have never tried it with a custom ROM.
Click to expand...
Click to collapse
I took the .img files from the rom.zip that you get from the RUU, but it doesnt work.
C:\Programas\Fastboot>fastboot flash boot boot_signed.img
sending 'boot' (6156 KB)...
OKAY [ 0.966s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 1.000s
C:\Programas\Fastboot>fastboot flash system system.img
sending 'system' (1048572 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.309s
pikul said:
I took the .img files from the rom.zip that you get from the RUU, but it doesnt work.
C:\Programas\Fastboot>fastboot flash boot boot_signed.img
sending 'boot' (6156 KB)...
OKAY [ 0.966s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 1.000s
C:\Programas\Fastboot>fastboot flash system system.img
sending 'system' (1048572 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.309s
Click to expand...
Click to collapse
If you have the RUU.zip, do this then:
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip rom.zip
see if that works..
This is what i get:
C:\Programas\Fastboot>fastboot flash zip rom.zip
sending 'zip' (576544 KB)...
OKAY [ 24.368s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 26.975s
this sucks, i have to go to work and i dont have another cellphone :/
pikul said:
this sucks, i have to go to work and i dont have another cellphone :/
Click to expand...
Click to collapse
You can try to find the cidnum for the htc onexl and see if you can trick it by editing android-info.txt file to match cid num.
Example:
edited android-info file
modelid: PG3213000
cidnum: KT___901
cidnum: HTC__004(this edited file only)
mainver: 2.32.1010.1
hbootpreupdate:13
boot again into fastboot
AT&T HTC OneXL
Android 4.1.1
ViperXL