I was watching other videos where htey demonstrate the S Note application and I noticed mine is laggier then theirs? How do I fix that?
For example, it takes a bit longer for switching from read only mode - edit mode? Also when I press the pen settings mode it lags a bit.
And another question: sometimes my connection to internet disconnect for a split second and reconnect again and then disconnect again. It shows "Connected to WiFi" and it pops up over a over.
Related
Hello,
I have a question about the red key (for ending phone calls) in Windows Mobile.
In the past I could use it, to quickly minimize every application. So I could get back to the today screen very fast.
Now it is doing the same, but it also disconnects any active GPRS connection.
And this button disconnects me even if I lock the device or shut off its display.
How can I change this behavior? Is there any registry entry, which lets me adjust this buttons functions?
Howdy,
The most frustrating thing about my Fuze is the texting is a bit glitchy. If I open up a new message & put in a contact...then immediately start typing, it trys to make a phone call. However, if I pause for a bit it'll stay in the message app.
Any ideas?
Um, the text to phone was a problem on my tilt too, but it was only when I switched from portrait to landscape and started to type right away. Try flashing another rom. I did, and it fixed my problem.
TazMan1688 said:
Howdy,
The most frustrating thing about my Fuze is the texting is a bit glitchy. If I open up a new message & put in a contact...then immediately start typing, it trys to make a phone call. However, if I pause for a bit it'll stay in the message app.
Any ideas?
Click to expand...
Click to collapse
Yeah, I seem to be getting a very similar problem.
If I open a newly received message whilst in portrait mode (normally through the 25-message-capacity TF3D screen), then slide the keyboard open to reply in landscape mode, the system momentarily rotates the message view to landscape and prepares to allow me to type, then the phone inexplicably switches to the phone dialler screen.
I'm running a Touch Pro in Australia on the 3 network. Unsure of my ROM but it's unchanged from what it shipped with.
Facing a very strange problem on my device. Sometimes - often, but not always - the top left edge of my screen looses senbility. Though I touch, it does not accept the command. If I turn the screen sideways the site on the screen become irresponsive and the former area magically starts to respond. And this behavior goes away the same way it appears.
Already tried to force gpu rendering and deactivate HW on developers options, turn of on screen buttons and deactivate adaptative brightness. So far, no answer.
Any clue?
Thanks!
A while back, My old Stylo 2 stopped working due to a very strange (I assume hardware-related) bug that made the phone constantly press the same spots over and over and over, and the screen was entirely unresponsive otherwise. Only those few spots ( 1. About 25% up the bottom right side, 2. The very top right corner, and most prominently 3. Just right of the multitasking button, within its 'hitbox'.) have any effects on the screen at all, and I cannot find places on the screen that are 'touchable' due to the multitasking button being hit over and over and it constantly switching me between apps.
More than anything, I just want to change my USB mode to file transfer to get my pictures off the phone, but even as easy as that is in Android 7 (pull down the top menu, select USB settings, change to file transfer right?) I can't even get the top menu down most of the time, let alone get to the USB settings. On the rare occasion that I do get all the way there, either the multitasking button starts acting up again or the screen stops responding to everything altogether, making the one thing I need to select un-selectable. Much to my dismay, it also seems that I have USB Debugging turned off (I honestly have no idea why or how this was turned off, as I use ADB frequently), so I can't even use ADB to get a screen control app to run. Are there any ways to either force USB Debugging to be on via console (Win8) or otherwise, or control the screen and disable touch without the need for a third-party app?
Yes
007manyo said:
A while back, My old Stylo 2 stopped working due to a very strange (I assume hardware-related) bug that made the phone constantly press the same spots over and over and over, and the screen was entirely unresponsive otherwise. Only those few spots ( 1. About 25% up the bottom right side, 2. The very top right corner, and most prominently 3. Just right of the multitasking button, within its 'hitbox'.) have any effects on the screen at all, and I cannot find places on the screen that are 'touchable' due to the multitasking button being hit over and over and it constantly switching me between apps.
More than anything, I just want to change my USB mode to file transfer to get my pictures off the phone, but even as easy as that is in Android 7 (pull down the top menu, select USB settings, change to file transfer right?) I can't even get the top menu down most of the time, let alone get to the USB settings. On the rare occasion that I do get all the way there, either the multitasking button starts acting up again or the screen stops responding to everything altogether, making the one thing I need to select un-selectable. Much to my dismay, it also seems that I have USB Debugging turned off (I honestly have no idea why or how this was turned off, as I use ADB frequently), so I can't even use ADB to get a screen control app to run. Are there any ways to either force USB Debugging to be on via console (Win8) or otherwise, or control the screen and disable touch without the need for a third-party app?
Click to expand...
Click to collapse
Yes, but I'd appreciate a thanks for the solution! I give and give ...
First, what model number is your Stylo? For instance I have the Cricket variety (H634). Once you figure that out check out my link below with particular attention paid to the "how to enable usb debugging via dialup" step. I just tried it with my Stylo (H634), works great. The link pertains to the LG G6 but it will work on your LG Stylo as well.
https://forum.xda-developers.com/tmobile-g6/how-to/frp-unlock-lg-g6-using-headphone-jack-t3616166
Or just try this ...
Dial *#546368#*_ _ _# (Field Test Mode). Enter your devices model number in the three blanks. Mine for instance would be *#546368#*634# (H634 being the Cricket model number). Go to SVC>LDB> Enable usb debugging
Happy USB'n!
I have a Nexus 5 hammerhead on the latest version of Magisk. Recently it "refreshed" itself, shutting down the screen and then opening it again very quickly. It was more an annoyance than anything, especially while looking at YouTube video, since it would pause the video each time. Now, the screen randomly shut down without it opening again. The phone does not shut down, as I still hear the game I was playing, for example, and it was still recognizing my touch input. The only way I found to open the screen again is to force shut down the phone and opening it again. Anyone had this issue, and maybe a fix for it?