Database Info

Data2Sd doesn't work

Hi
I'm using the htc desire with ClockworkMod Recovery v5.0.2.0
I wan't to enable data2sd . So first I made a a partition in the recovery 1025mb and 0 swap and installed the redux custom rom . afterwards trying to install data2sd. didn't work
so i wiped everything mada a a partition again and installed Supernova custom rom. Still there is only about 50 mb internal storage.
tried to make a partition with pc and clockworkmod.. no success.
please I try this for many hours now..
Thank you for your help I want to use my desire again

Your ext3 need to be ext4 clockwork mod cant convert ext3 into ext4.
I used MiniTool Partition Wizard

if someone is still searching for this...
read instructions here try a ROM with full support: StarBurst ROM

[Q] sd-ext partition corrupt?( partition made using CWM)

I apologize if similar thread has already been posted.
I had just installed a new ROM (Holo Sandvich) when I decided to increase my internal memory,
I saw a few tutorials, made an SD card paritition of 1GB.(Total Size=4GB) After that was done, the tutorial directed me to write this in a terminal window.
su (press enter)(pop up of superuser will be there —>Allow it)
m2sd mount enable(enter)
m2sd data disable(enter)
m2sd apps disable(enter)
m2sd dalvik disable(enter)
m2sd data enable(enter)
But after each code I would read
sh:m2sd not found.
I thought something was wrong.. I installed Minitool Partition manager.. When I mounted USB. I was surprised to see no sd-ext drive. Only the 2.73 normal partition was present..
It was like my 1GB disappeared..
When I asked my friend ([email protected]).. He said that CWM corrupts your sd-ext drive..
So, now I want to know how to proceed? How should I get that 1 GB back in FAT32 format? Is that 1 GB lost?
If I merge the drives again, I'll reparition in TWRP then..
________________________________________________
Completely new over here.
My first thread.
Apologies if solution is too obvious or something.
Please bear my noob.
Device.
HTC Pico
ROM- Holo Sandvich 1.3.

use twrp or minitool partition, and use int2ext script or mounts2sd app from playtore

sparre said:
I apologize if similar thread has already been posted.
I had just installed a new ROM (Holo Sandvich) when I decided to increase my internal memory,
I saw a few tutorials, made an SD card paritition of 1GB.(Total Size=4GB) After that was done, the tutorial directed me to write this in a terminal window.
su (press enter)(pop up of superuser will be there —>Allow it)
m2sd mount enable(enter)
m2sd data disable(enter)
m2sd apps disable(enter)
m2sd dalvik disable(enter)
m2sd data enable(enter)
But after each code I would read
sh:m2sd not found.
I thought something was wrong.. I installed Minitool Partition manager.. When I mounted USB. I was surprised to see no sd-ext drive. Only the 2.73 normal partition was present..
It was like my 1GB disappeared..
When I asked my friend ([email protected]).. He said that CWM corrupts your sd-ext drive..
So, now I want to know how to proceed? How should I get that 1 GB back in FAT32 format? Is that 1 GB lost?
If I merge the drives again, I'll reparition in TWRP then..
________________________________________________
Completely new over here.
My first thread.
Apologies if solution is too obvious or something.
Please bear my noob.
Device.
HTC Pico
ROM- Holo Sandvich 1.3.
Click to expand...
Click to collapse
use twrp recovery 2.5.5 then partition sdext 1gb -no swap-ext3. then install ur rom
download and install this script in recovery, reboot ur rom
http://forum.xda-developers.com/attachment.php?attachmentid=1419087&d=1350819769
type m2sd commands in terminal... enjoy

No luck.
dinesam said:
use twrp recovery 2.5.5 then partition sdext 1gb -no swap-ext3. then install ur rom
download and install this script in recovery, reboot ur rom
http://forum.xda-developers.com/attachment.php?attachmentid=1419087&d=1350819769
type m2sd commands in terminal... enjoy
Click to expand...
Click to collapse
m2sd commands worked, but internal memory did not increase. (Should have!)

Connect your sdcard to pc through card reader
Then delete sd-ext using minitool partition wizard
For partitioning your you have two ways
1-use minitool partition wizard
2-flash twrp recovery
And partition your sdcard(this will formay your sdcard)
Sent from my HTC Explorer using xda premium

sparre said:
I apologize if similar thread has already been posted.
I had just installed a new ROM (Holo Sandvich) when I decided to increase my internal memory,
I saw a few tutorials, made an SD card paritition of 1GB.(Total Size=4GB) After that was done, the tutorial directed me to write this in a terminal window.
su (press enter)(pop up of superuser will be there —>Allow it)
m2sd mount enable(enter)
m2sd data disable(enter)
m2sd apps disable(enter)
m2sd dalvik disable(enter)
m2sd data enable(enter)
But after each code I would read
sh:m2sd not found.
I thought something was wrong.. I installed Minitool Partition manager.. When I mounted USB. I was surprised to see no sd-ext drive. Only the 2.73 normal partition was present..
It was like my 1GB disappeared..
When I asked my friend ([email protected]).. He said that CWM corrupts your sd-ext drive..
So, now I want to know how to proceed? How should I get that 1 GB back in FAT32 format? Is that 1 GB lost?
If I merge the drives again, I'll reparition in TWRP then..
________________________________________________
Completely new over here.
My first thread.
Apologies if solution is too obvious or something.
Please bear my noob.
Device.
HTC Pico
ROM- Holo Sandvich 1.3.
Click to expand...
Click to collapse
Connect your memory card with pc via card reader then delete all the partitions using mini tool partition wizard and again create a partition through recovery by yannou swap size 0 and flash your rom and then flash mount2sd.zip simple
Hit the thanks button for no reason

Yeah. Figured that out.
Chemical47 said:
Connect your memory card with pc via card reader then delete all the partitions using mini tool partition wizard and again create a partition through recovery by yannou swap size 0 and flash your rom and then flash mount2sd.zip simple
Hit the thanks button for no reason
Click to expand...
Click to collapse
Thanks. You're right. Borrowed friends sd card reader.. USB mount not good .

Always welcome buddy
Device : HTC Explorer (Little Beast)
Rom : Mini CM9
Hit the thanks button for no reason

I have some doubts :(

What is the difference between ext2, ext3 , ext4 ?? and what are they actually??
I have 8gb class 4 memory card. If i need to make 3 partitions (sd-ext, sd-data, sd-cache) for installing a rom and a kernel in my pico, how much space should i allot for each partition?

123arunkumar said:
What is the difference between ext2, ext3 , ext4 ?? and what are they actually??
I have 8gb class 4 memory card. If i need to make 3 partitions (sd-ext, sd-data, sd-cache) for installing a rom and a kernel in my pico, how much space should i allot for each partition?
Click to expand...
Click to collapse
512mb or 1gb for sd-data partition & 70mb for sd-cache partition..make both primary & ext4.

Affangta said:
512mb or 1gb for sd-data partition & 70mb for sd-cache partition..make both primary & ext4.
Click to expand...
Click to collapse
but in recovery mode it is not detecting the sd ext partition if i keep ext4. it is detecting only ext2.. why is it happening like this?
i m using twrp 2.4.4.0 recovery

123arunkumar said:
but in recovery mode it is not detecting the sd ext partition if i keep ext4. it is detecting only ext2.. why is it happening like this?
i m using twrp 2.4.4.0 recovery
Click to expand...
Click to collapse
well, make both partitions as ext3 if you want to mount external partition in recovery.
I'm using sd-data as ext3 & sd-cache as ext4 & I can mount it in recovery, nandroid backup also works.

Affangta said:
well, make both partitions as ext3 if you want to mount external partition in recovery.
I'm using sd-data as ext3 & sd-cache as ext4 & I can mount it in recovery, nandroid backup also works.
Click to expand...
Click to collapse
i did the same process and flashed jarvis kernel in cm10.2 w8 rom..but again bootloop problem araised

123arunkumar said:
i did the same process and flashed jarvis kernel in cm10.2 w8 rom..but again bootloop problem araised
Click to expand...
Click to collapse
use aries kernel 3.5, works for everyone.

[Q] Cannot Create Partition To Increase Internal Memory

Right now i am on cm 10.1 . Jelly Bean 4.2.2 . I have tried all method of partition but its not working i.e int2sd , app2sd and with minipartition tool , i have created partition with CWM 6.0.2.8 . Please Need urgent Help ?

rkumbhar said:
Right now i am on cm 10.1 . Jelly Bean 4.2.2 . I have tried all method of partition but its not working i.e int2sd , app2sd and with minipartition tool , i have created partition with CWM 6.0.2.8 . Please Need urgent Help ?
Click to expand...
Click to collapse
connect sdcard to pc via card reader & check in minitool partition wizard..you may have made the partitions logical or something..post the details here.
You need to make all partitions as Primary & with a sequence.

Affangta said:
connect sdcard to pc via card reader & check in minitool partition wizard..you may have made the partitions logical or something..post the details here.
You need to make all partitions as Primary & with a sequence.
Click to expand...
Click to collapse
No i have mad e partiton primary i just used this method > 1. delete your sd-ext partition (JUST YOUR SD-EXT PARTITION)
2. create partition
3. set as Primary
4. and CHOOSE ext4!!,
5. ok and then,
6. Apply

rkumbhar said:
No i have mad e partiton primary i just used this method > 1. delete your sd-ext partition (JUST YOUR SD-EXT PARTITION)
2. create partition
3. set as Primary
4. and CHOOSE ext4!!,
5. ok and then,
6. Apply
Click to expand...
Click to collapse
then the problem is in the memory script..have you tried those scripts on other roms? do they work?

Affangta said:
then the problem is in the memory script..have you tried those scripts on other roms? do they work?
Click to expand...
Click to collapse
NO didnt tried anyother rom please suggest me rom which is stabe and easily supports memory script

rkumbhar said:
NO didnt tried anyother rom please suggest me rom which is stabe and easily supports memory script
Click to expand...
Click to collapse
Change your recovery and try.. Then use the scripts i hope you know the permissions and all for scripts to work..

recovery
rkumbhar said:
Right now i am on cm 10.1 . Jelly Bean 4.2.2 . I have tried all method of partition but its not working i.e int2sd , app2sd and with minipartition tool , i have created partition with CWM 6.0.2.8 . Please Need urgent Help ?
Click to expand...
Click to collapse
Change your recovery and partition your sd card with Recovery it happens with me on everytime with mini partition tool but Recovery Soved it.....preferable Philz Recovery.:good:

maksuperlink said:
Change your recovery and partition your sd card with Recovery it happens with me on everytime with mini partition tool but Recovery Soved it.....preferable Philz Recovery.:good:
Click to expand...
Click to collapse
ok then after that which software or script should i use

recovery
rkumbhar said:
ok then after that which software or script should i use
Click to expand...
Click to collapse
Use Philz recovery for partition but first backup your all data

How to flash gamersab?

Gamersab is stock and htc sense 3.5. How to flash it? I need to make RUU?

Its not RUU
michal16 said:
Gamersab is stock and htc sense 3.5. How to flash it? I need to make RUU?
Click to expand...
Click to collapse
No need to make RUU its a flashable zip..
In the instructions its written flash the zip..
Hit thanks if helped you

But i formating all and flashing and nothing! Stuck on htc logo. Please help me
i have latest TWRP recovery and i going to recovery format all without sdcard (cache, data, syste, dalvik cache, sdext and other) and flash rom and reboot and waiting 2 hours and only htc logo! please help
And i have sdcard partitions
Files 13GB
SD-DATA - !GB
SD-CACHE 65MB

michal16 said:
But i formating all and flashing and nothing! Stuck on htc logo. Please help me
i have latest TWRP recovery and i going to recovery format all without sdcard (cache, data, syste, dalvik cache, sdext and other) and flash rom and reboot and waiting 2 hours and only htc logo! please help
And i have sdcard partitions
Files 13GB
SD-DATA - !GB
SD-CACHE 65MB
Click to expand...
Click to collapse
Remove all your partitions..
Then flash the ROM..
As the ROM is in band memory card removal won't affect the ROM..
Now take a backup of your card..
Create partition through recovery ..
Use link2sd only not anything else..
via Apache Helicopter

I don't understand
You mean delete partions flash rom copy sdcard files make partions from recovery?

michal16 said:
I don't understand
You mean delete partions flash rom copy sdcard files make partions from recovery?
Click to expand...
Click to collapse
1. Empty your card by copying all your contents to PC..
2. Open minitool ..
Delete all partitions as you have 3 partitions .. Make it single means 1 partition make it fat32
3. Copy the ROM in the card after partitioning ..
4. Go to recovery.
5. Flash the ROM..
6. Reboot your phone
7. Again to recovery
8. Partition SD card
9. Now boot in ROM ..
10 . install link2sd select the partition type and its done..
via Apache Helicopter

6. Wait for boot or pull out battery?

michal16 said:
6. Wait for boot or pull out battery?
Click to expand...
Click to collapse
Wait.. As its on nand it won't take much time to boot .. If it takes time then remove battery and try again..
via Apache Helicopter

ok i will try

Still not booting. i wipe everything in recovery and not working too.

michal16 said:
Still not booting. i wipe everything in recovery and not working too.
Click to expand...
Click to collapse
Switch to yannou recovery and try..
via Apache Helicopter