Nexus 4 with a motorcycle - Nexus 4 Accessories

Hey, I was wondering if any other nexus users also drove a motorbike? Any suggestions for how to mount (securely) and charge it would be greatly appreciated. I have a Honda CBR250R if it makes a difference. Currently considering a Ram mount but i dont think they make a nexus 4 model...

http://www.rammount.com/CatalogResu...77045072079076045085078055066085/Default.aspx
This seems to be the best i could find, not 100% it will fit. But it seems adjustable. And heaps sturdy.
If anyone has a better suggestion, just post or PM

+1 on the XGrip cradle. Very secure.

yup get the xmount cradle along with this http://www.rammount.com/CatalogResu...d/082065077045066045049055054085/Default.aspx
and finally one of these
http://www.cyclegear.com/CycleGear/...TRACKSIDE/12-Volt-Power-Adapter/p/39006_53443

Don't you have a waterproof case or do you never drive in the rain?
I also have a nexus and I am looking for a waterproof case, mountable on motorbike, and cable connected to battery.
Something like this : www.rammount.com/Products/AQUABOX/MediumAQUABOX/tabid/4885/Default.aspx , but I don't know if this is big enough to fit nexus 4 and a usb chargercable in it. According to the specifications it would be a very close fit, but maybe if i remove a little bit from the inside bottom it might work.
Does anyone have any experience with this?
Thanks,
Tim
r1nstang said:
yup get the xmount cradle along with this http://www.rammount.com/CatalogResu...d/082065077045066045049055054085/Default.aspx
and finally one of these
http://www.cyclegear.com/CycleGear/...TRACKSIDE/12-Volt-Power-Adapter/p/39006_53443
Click to expand...
Click to collapse

DaltonMaltese said:
Don't you have a waterproof case or do you never drive in the rain?
I also have a nexus and I am looking for a waterproof case, mountable on motorbike, and cable connected to battery.
Something like this : www.rammount.com/Products/AQUABOX/MediumAQUABOX/tabid/4885/Default.aspx , but I don't know if this is big enough to fit nexus 4 and a usb chargercable in it. According to the specifications it would be a very close fit, but maybe if i remove a little bit from the inside bottom it might work.
Does anyone have any experience with this?
Thanks,
Tim
Click to expand...
Click to collapse
dont ride in the rain unless its an unexpected shower. phone was usually always in my pocket. if i needed to be able to see it..like nav (which honeslty i just used headphones and voice nav) i would stick it in my tank bag with the clear pocket on top

r1nstang said:
dont ride in the rain unless its an unexpected shower. phone was usually always in my pocket. if i needed to be able to see it..like nav (which honeslty i just used headphones and voice nav) i would stick it in my tank bag with the clear pocket on top
Click to expand...
Click to collapse
Thanks, I'm really looking for something to navigate in rain, and also something that can handle some heavy shocks, I will keep looking forward.
Ciao!

DaltonMaltese said:
Thanks, I'm really looking for something to navigate in rain, and also something that can handle some heavy shocks, I will keep looking forward.
Ciao!
Click to expand...
Click to collapse
So did you find anything?

Well, I ordered a Ultimate Addons tough case for galaxy s3 with handlebar mount.The S3 is slightly smaller so there is more room for an adaptercable in case to connect to battery when u use nexus. But the S3 is also about 1/2 mm thinner so i can close the case but it leaves some space between edges because if bit to thick. There is a big rubber plate in case to secure phone (1/2 cm) where i was able to scratch off the right amount to fit the nexus in perfectly. Rear camera is still usable, volume buttons not and audio jack not, front camera half visible.
The phone now fits perfect in case and u can touch and slide. Because of not reaching power button i use the shake app wgen i use case and so I just shake to unlock screen. I attached the handlebar to my motorcycle, looks nice and firm, but was having doubts for putting my phone in the case for the first ride, so i just connected case but without phone in it and went riding. All worked great, u can twist phonecase in any direction at and then fix it at good viewpoint, problem is I have feeling it is never fixed solid enough, if i touch it a little , it moves, but it never moved when driving, I drive a honda transalp 650 and I quite push it to limit on speedbumps etc. I haven't tested it with my phone in it yet because on the first testride i got hit by car (his fault, again..) and slammed to ground and ended 40 metres further with bike against rail, i was lucky having very good protection, and the case was still intact and didnt move . My bike lost two mirrors and scratched and bruised all over, but in the end, good test, too bad my phone was not in it. I will test it when my bike gets back from garage
Grtz
Tim
mandhir.s.bajwa said:
So did you find anything?
Click to expand...
Click to collapse

Related

Jogging Armband for the N1

Doing a bit of research and came across these:
* Tuneband for Nexus One (US Amazon)
http://www.amazon.com/Tuneband-Grantwood-Technologys-Silicone-Protector/dp/B003GMHJAS
* iGadgitz (UK Amazon)
http://www.amazon.co.uk/iGadgitz-Neoprene-Sports-Jogging-Armband/dp/B003QJ6MR2/ref=pd_rhf_p_t_1
* Belkin Sports Armband for iPhone 3GS (UK Amazon)
http://www.amazon.co.uk/dp/B002CVCK...de=asn&creative=22206&creativeASIN=B002CVCK0S
And a few others.
Also - a lot of iPhone straps, but not a lot of confirmation, despite the similar dimensions, that the N1 will fit snuggly.
Anyone tried any of these who can advise on which are good \ bad? Any good ones I have missed?
There was a lot of arkmband discussion on another thread...maybe some scoop there.
Found it: http://forum.xda-developers.com/showthread.php?t=672443&highlight=armband
I rock the tuneband, its solid enough... i wish the strap was wider for a bit more support for the phone but definitely does the job...
I put on the screen protector as well for ****s and giggles and its actually not bad
Just Ordered the Iarmband one. Will let you know how it fits when it gets here.
JHaste said:
I rock the tuneband, its solid enough... i wish the strap was wider for a bit more support for the phone but definitely does the job...
I put on the screen protector as well for ****s and giggles and its actually not bad
Click to expand...
Click to collapse
Have you done hard sprinting with it? I love my Tuneband, but haven't dared to run full sprint with it.
Slip it in between your heart rate monitor band its not in the best position but it works for me.
Sent from my HTC Desire using Tapatalk
cigar3tte said:
Have you done hard sprinting with it? I love my Tuneband, but haven't dared to run full sprint with it.
Click to expand...
Click to collapse
yea it jostles around a bit... i would recommend you strap it high enough to tuck a sleeve over it
I run with the Belkin armband (from when I had an iPhone), and sony bluetooth earphones. I find it fits the Nexus quite snugly, the sound quality is great even while sprinting and no cables!
for those of you with a tuneband, does the phone fit with a case?
alvinleephd said:
for those of you with a tuneband, does the phone fit with a case?
Click to expand...
Click to collapse
It fits perfectly, but I haven't dared to do hard sprinting with it yet, since it's not a full coverage. It's like a silicon sleeve and the band goes through the back of the sleeve.
http://www.officedepot.com/a/products/412983/XtremeMac-Sportwrap-For-iPhone-Black/
This works perfectly for me. The normal way of using it with the iPhone will not work with the nexus because the hole for the 3.5mm jack is on the wrong side. Rather than destroy the thing, I put it on upside-down and it has two holes on the bottom, one of which I can use. Also this way the flap that allows you to slide the phone in and that's supposed to keep the phone inside the thing is on the top and somewhat secure thanks to the 3.5mm plug. Also, I've used it on about 15-20 different runs and it's never bothered me or showed any signs of wear.
http://www.iarmbands.com/product.sc...2809C526C754451921A.qscstrfrnt05?productId=21
Got it.. Ran 3 miles today, did back and biceps! Cord NEVER got in my way, and stayed plugged in the whole time!! **** YEA
Never even felt it was there, i can still swype text. Never really even thought it would be comfortable. I had to put it up higher than my bicep... If you have over 17" Biceps this would be a uncomfortable product.
has anyone else found any decent ones?
has anyone else found any decent ones?
cigar3tte said:
Have you done hard sprinting with it? I love my Tuneband, but haven't dared to run full sprint with it.
Click to expand...
Click to collapse
Really? I've done full-out sprints with the tuneband, no problem.
zok-star said:
has anyone else found any decent ones?
Click to expand...
Click to collapse
Try the one I linked to. I'm pretty sure you wouldn't be disappointed.
non of these places ship to Australia
I use the Belkin Sport Armband - but I wear it around my wrist so the N1 ends up riding like a big flat watch. The RunKeeper app is really well done, and wearing it like this allows me to see pace and distance, etc.
I haven't tried it with headphones yet.
I just got my Tuneband a couple of days ago. The days I got it I used it one the treadmill for a 30min jog at 6mph and no issues. Yesterday I used it at the gym on the weight machines and no issues either. I figure if it the N1 did pop out at least the speaker wire should keep it from hitting the floor. But it felt solid the whole time. Good product, especially when it was 12.99(?) on sale at amazon.
I ended up buying some iphone armband for like $7aud. Went for a 10KM jog the other weekend, and i cant fault it!!!
I had to cut a hole for the nexus one head fone jack but other than that perfect! Just on the outside of the where the phone sat was sweaty but inside not one drop!

[Q] Best Case/Cover for using on a bike

I've just been getting a bike (pedal bike) and would quite like to use my DHD on the bike, for GPS , etc is there a case or mount or anything that will go on a pedal bike , or if not is there a decent case I could strap round my arm, that would protect my phone in case of rain/falls
otterbox defender
/thread
Bike mount
Hi,
I have found this fits a little tighter and feel like the phone wont flop about http://www.buybits.com/product/9264.aspx it is only £20 in the UK and I found in my local store a voucher to get some money off. Might still work "TESCO 1" at the checkout bit.
Anyways decent mount have used it on a mountain bike for gps and no issues with the case or mount. just not tried it yet when wet.
That's exactly what I'm after, cheers mate, will order one at the weekend I think.
Steve_Walker said:
Hi,
I have found this fits a little tighter and feel like the phone wont flop about http://www.buybits.com/product/9264.aspx it is only £20 in the UK and I found in my local store a voucher to get some money off. Might still work "TESCO 1" at the checkout bit.
Anyways decent mount have used it on a mountain bike for gps and no issues with the case or mount. just not tried it yet when wet.
Click to expand...
Click to collapse
Sent from my Desire HD using XDA App
I'm using otterbox commuter and it really nice~
DP4 said:
I've just been getting a bike (pedal bike) and would quite like to use my DHD on the bike, for GPS , etc is there a case or mount or anything that will go on a pedal bike , or if not is there a decent case I could strap round my arm, that would protect my phone in case of rain/falls
Click to expand...
Click to collapse
how bout this one:
http://www.mobilefun.co.uk/bike-holder-for-desire-hd-p27530.htm
nm8 said:
how bout this one:
http://www.mobilefun.co.uk/bike-holder-for-desire-hd-p27530.htm
Click to expand...
Click to collapse
Very cool. I've been thinking about taking videos while cycling (both looking into the camera or the camera pointing forward) like this guy (fast forward to 2:09) and this looks to be just right for that. I also use a tpu case so I'm hoping it will also fit inside the frame.
Thanks.
Grant Barker said:
Very cool. I've been thinking about taking videos while cycling (both looking into the camera or the camera pointing forward) like this guy (fast forward to 2:09) and this looks to be just right for that. I also use a tpu case so I'm hoping it will also fit inside the frame.
Thanks.
Click to expand...
Click to collapse
Getting slightly OT, but I think a camera mount on the helmet is the best bet for recording a trip, since it would point where you're looking (not where the handlebars are pointing) and bounce about much less.
Depends if it's road or mountain-biking I suppose...
On that point, I have often wondered about just how vulnerable a handlebar-mounted phone would be in the case of a fall: I have a feeling that beyond the shock of the fall, I don't think it would actually receive a direct impact, unless the fall was unusually spectacular. I've had a few and the stem-handlebar area doesn't seem to actually hit the ground.
I do wonder, though, on just how much vibration is healthy for a high end phone....
Yeah the helmet cam is a good idea (like many skydivers use) but to be honest I don't wear a helmet or head gear.
The guy in the video has quite a few cycling vids (he's just almost finished crossing the States on his bike) and his cam stability is pretty good and tripod based. I don't mind the shaking and vibration or wind too much. I use a mountain bike and it wouldn't be serious stuff - just out and about sometimes. To be honest - the glare on the screen makes me imagine the experience to be not so brilliant when using the display - unless riding at night maybe - but the screen should time out otherwise the battery won't last long. I'm hoping the TPU case would add extra padding.
Steve_Walker said:
Hi,
I have found this fits a little tighter and feel like the phone wont flop about http://www.buybits.com/product/9264.aspx it is only £20 in the UK and I found in my local store a voucher to get some money off. Might still work "TESCO 1" at the checkout bit.
Anyways decent mount have used it on a mountain bike for gps and no issues with the case or mount. just not tried it yet when wet.
Click to expand...
Click to collapse
Thanks for the link , just ordered one , Gonna try if can get it on my gastank pouch with velcro Now I need headphones with mic .. something like this http://stores.nextag.com/store/4788736/product/886312422/Cyber-Acoustics-OEM-AC any suggetions ? the mic must be with noise cancelling ...and one jack instead of 2
Steve_Walker said:
Hi,
I have found this fits a little tighter and feel like the phone wont flop about http://www.buybits.com/product/9264.aspx it is only £20 in the UK and I found in my local store a voucher to get some money off. Might still work "TESCO 1" at the checkout bit.
Anyways decent mount have used it on a mountain bike for gps and no issues with the case or mount. just not tried it yet when wet.
Click to expand...
Click to collapse
I got this on Tuesday and it works spot on. Feels very sturdy and secure attached to my bike, I can confirm it is indeed very waterproof as I got caught up in some horrible rain and when I got home the phone was bone dry.
Steve_Walker said:
Hi,
I have found this fits a little tighter and feel like the phone wont flop about http://www.buybits.com/product/9264.aspx it is only £20 in the UK and I found in my local store a voucher to get some money off. Might still work "TESCO 1" at the checkout bit.
Anyways decent mount have used it on a mountain bike for gps and no issues with the case or mount. just not tried it yet when wet.
Click to expand...
Click to collapse
Good find!
Sent from my Desire HD using XDA App
chardd23 said:
otterbox defender
/thread
Click to expand...
Click to collapse
+1
This thing is bombproof.
nm8 said:
how bout this one:
http://www.mobilefun.co.uk/bike-holder-for-desire-hd-p27530.htm
Click to expand...
Click to collapse
Look on ebay for this one. It's WAY cheaper. I got one but it now for £6.
Sent from my Motorola Startac running Atari 2600 software!
erdinc said:
Thanks for the link , just ordered one , Gonna try if can get it on my gastank pouch with velcro Now I need headphones with mic .. something like this http://stores.nextag.com/store/4788736/product/886312422/Cyber-Acoustics-OEM-AC any suggetions ? the mic must be with noise cancelling ...and one jack instead of 2
Click to expand...
Click to collapse
Why not try a bluetooth headset, and get a usb charger for the phone instead. Usb chargers can be bought from ebay.

Exogear Exomount (Universal Car Phone Holder)

I purchased one of these to hold my phone and was sick of changing mounts every time i got a new phone.
http://www.exogear.com/products-exomount-car-mount-holder.html
Its basically a normal suction mount with a little bit of a sticky surface that does not come off on anything. The DHD fits fine and i haven’t had it fly off or wobble as i am driving or turning (and yes i turn sharp at high speeds).
This is probably (apart from a proclip) one of the best universal mounts i have used. The proclip is my choice as its solid and fixed but requires work, this on the other hand is my second choice as i can stick it anywhere in my car and have it suck down without leaving a mark and not have to mess around changing clips.
Features:
•Exomount’s patented suction technology enables you to mount on almost any flat surface such as car dashes, glass, wood, metal,
plastics and even drywall!
•Polyurethane lined grip keeps your phone or GPS safe and secure
•Quickly and easily mount and unmount your phone or GPS with our stylish clip grip holder
•Mounts all smart phones and GPS devices up to 5-inch screens
•Multi-angle rotation for your preferred viewing angle
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
also any issues with the patented stick technology or whatever its called becoming not so grippy after x weeks/months?
Try slipgrip mounts for otterbox cases. You can find it on ebay also.
pappas99 said:
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
also any issues with the patented stick technology or whatever its called becoming not so grippy after x weeks/months?
Click to expand...
Click to collapse
Non mine is still sticky now, i don’t think it is supposed to be super sticky as the gel and stick i think improves the suction. I just purchased another because they are pretty good and it doesnt need to be on a flat surface to work at all.
I've read that vibration might be an issue... we have very bumpy roads where I'm at so I wouldn't like it to be all over the place...
Any further info about this please?
BuZzCoRe said:
I've read that vibration might be an issue... we have very bumpy roads where I'm at so I wouldn't like it to be all over the place...
Any further info about this please?
Click to expand...
Click to collapse
I think there is a video review which says this but i have tried this on a Samsung Galaxy S2, Iphone4,Desire HD and Sensation and it is perfectly fine on bumpy roads. The clamp is strong enough to hold it. You will get the same jigger on say a tomtom or any other mount.
The reason why the clamp is the size it is, so when holding onto phones it doesnt press any buttons on the side of the phone.
Quality isnt that bad for its price and i would think its the best universal mount i have used in a car, i have used many mounts but this one has lasted the longest and seems very promising.
You can even rotate it and mount a tablet in your car!
I have ordered mine from eBay.. will post report as soon as I receive the delivery...
Sent from my Desire HD
I'm a new user of it too, and love it !
Question for you:
Since my dash is not completely straight so I can't put it there (even so it lasts about 1 day), I'm putting it on the windshield, but the arm is so short that I can't find a good place for it.
I put it meanwhile just a lil bit below the mirror, but on a way that the top of the phone is kinda behind the mirror, otherwise its too far and too hard to reach it.
I tried many other places but none was good enough.
Its or too far or blocking the road.. :\
Where do you put it? and where do you suggest me to put?
Thanks,
Yarden.
what a piece of junk! i tried it last night and couldn't find ANY spots in my car (newish 2004) where it would stick! I haven't tried the windshield yet. It literally would stay in place a few seconds then fall. did anyone else get this? perghaps i installed it wrong. is it just a case of taking the white ring protector off the stick part then putting on a surface? or did i not do something?
I wonder how safe this would be if mounted on dash and you break suddenly.
pappas99 said:
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
Click to expand...
Click to collapse
Try Herbert Richter universal mounts if you're still after an option to use with otterbox case.
I've had mine for several weeks now.
It sticks everywhere.
I use mine with a Otterbox Commuter Case and it fits well.
Vibration is a small issue, though.
the Herbert Richter universal mounts is bulky with the arm, the exo gear mount is good btu if the clamp had a few extras to secure it better it would be 10/10
A|ex said:
I purchased one of these to hold my phone and was sick of changing mounts every time i got a new phone.
http://www.exogear.com/products-exomount-car-mount-holder.html
Its basically a normal suction mount with a little bit of a sticky surface that does not come off on anything. The DHD fits fine and i haven’t had it fly off or wobble as i am driving or turning (and yes i turn sharp at high speeds).
This is probably (apart from a proclip) one of the best universal mounts i have used. The proclip is my choice as its solid and fixed but requires work, this on the other hand is my second choice as i can stick it anywhere in my car and have it suck down without leaving a mark and not have to mess around changing clips.
Features:
•Exomount’s patented suction technology enables you to mount on almost any flat surface such as car dashes, glass, wood, metal,
plastics and even drywall!
•Polyurethane lined grip keeps your phone or GPS safe and secure
•Quickly and easily mount and unmount your phone or GPS with our stylish clip grip holder
•Mounts all smart phones and GPS devices up to 5-inch screens
•Multi-angle rotation for your preferred viewing angle
Click to expand...
Click to collapse
Alex, Mind to share what is the quality like?
pappas99 said:
what a piece of junk! i tried it last night and couldn't find ANY spots in my car (newish 2004) where it would stick! I haven't tried the windshield yet. It literally would stay in place a few seconds then fall. did anyone else get this? perghaps i installed it wrong. is it just a case of taking the white ring protector off the stick part then putting on a surface? or did i not do something?
Click to expand...
Click to collapse
yes. take the white protector bit off, its that sticky bit that helps it stay stuck to the surface, im surprised the suction bit worked at all with that thing still on lol
---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------
zane222 said:
Alex, Mind to share what is the quality like?
Click to expand...
Click to collapse
The quality feels like it is kinda flimsy, but after using it, it feels tough.. i used to be kinda careful with it but these days i just grab and twist it and it definitely doesn't feel like it's gonna fall apart.
The ball bit that it rotates on did get a bit dirty on mine and it got quite hard to rotate it, but just clean the bit of it you can see (no need to take apart) and then it should be all good again. That's only happened once to me, and i literally just wiped with a dry finger and wiggled it about a bit and its fine again.
I was JUUUUST about to buy one, but because I live in Australia, shipping + handling is $49 alone!
Does anyone recommend any other mounts, without the massive shipping charge?
Apart from ebay cheapies.
jaysinclair said:
I was JUUUUST about to buy one, but because I live in Australia, shipping + handling is $49 alone!
Does anyone recommend any other mounts, without the massive shipping charge?
Apart from ebay cheapies.
Click to expand...
Click to collapse
I do not mind if you send me cash paypal etc to handle the purchase and shipping for you? If you like i can weigh the actual device (without packaging) which will make it cheaper and price up on royalmail web site air mail signed for etc?
Got one of those
I got the exogear holder about a month ago, and i can recommend it to anyone.
Sticks nice to many surfaces, the phone is not slipping down, can be used with a phone of any size (or a gps device)
The only down side is that you have to use both hands to place your phone into the holder.
so it holds the note fine ?

Car mount?

I have the Nexus 4 with the bumper case and It wont fit my current phone mount from my LG G2X. I need a mount that can do around 5 incs of phone.
maybe a samsung note will do???
platinumxo said:
maybe a samsung note will do???
Click to expand...
Click to collapse
? I need something that will hold the phone where I can see it for GPS and music selection while I'm driving.
A lot of people think I'm crazy for sticking something on my phone but I seriously LOVE this thing I bought ( http://www.steelie.com/)
So you pretty much put tiny dongle on the back of your phone, which sticks due to a strong adhesive and that dongle has a magnet that attaches to a ball you can stick on your car too.
I've had for awhile on my SGSII and when I removed it, it came off with no sticky residue or anything! Once I get a back screen protector for my nexus 4 I'm sticking it on there as well.
Here's a picture of my car with the car ball. http://www.flickr.com/photos/[email protected]/8111732688/in/pool-steelie
and here's another http://www.flickr.com/photos/[email protected]/8111732114/in/pool-steelie/
It's awesome because I literally walk in my car, scan the NFC sticker and stick it on the ball. SNAP on. It's adjustable since its a ball you can move it around.
The only downside was the price. It's a bit expensive but seriously, I cannot have chosen a better product.
I feel like I'm an advert for them but seriously. It's awesome. Watch their youtube video! They started from kickstarter too (random tidbit)
Two downsides .. price and this thing on the back of your phone.
darkamikaze said:
A lot of people think I'm crazy for sticking something on my phone but I seriously LOVE this thing I bought ( http://www.steelie.com/)
So you pretty much put tiny dongle on the back of your phone, which sticks due to a strong adhesive and that dongle has a magnet that attaches to a ball you can stick on your car too.
I've had for awhile on my SGSII and when I removed it, it came off with no sticky residue or anything! Once I get a back screen protector for my nexus 4 I'm sticking it on there as well.
Here's a picture of my car with the car ball. http://www.flickr.com/photos/[email protected]/8111732688/in/pool-steelie
and here's another http://www.flickr.com/photos/[email protected]/8111732114/in/pool-steelie/
It's awesome because I literally walk in my car, scan the NFC sticker and stick it on the ball. SNAP on. It's adjustable since its a ball you can move it around.
The only downside was the price. It's a bit expensive but seriously, I cannot have chosen a better product.
I feel like I'm an advert for them but seriously. It's awesome. Watch their youtube video! They started from kickstarter too (random tidbit)
Click to expand...
Click to collapse
I like it on the back of my phone lol doesn't add bulk at all IMO.
Not to mention it makes me want to check everything in my household if they are metal so I can stick it on it
darkamikaze said:
I like it on the back of my phone lol doesn't add bulk at all IMO.
Not to mention it makes me want to check everything in my household if they are metal so I can stick it on it
Click to expand...
Click to collapse
Have you thought about attaching that magnet to the back of a case and placing the nfc tag inside where the back of the phone would be?
It would be a good way to keep the back of the phone clean and still have a way to attach it to your car.
Steelie looks really cool, but it's quite pricey for what it is. I'd mount the phone ring on a case rather than right on the back.
tizio13 said:
Have you thought about attaching that magnet to the back of a case and placing the nfc tag inside where the back of the phone would be?
It would be a good way to keep the back of the phone clean and still have a way to attach it to your car.
Click to expand...
Click to collapse
That's how I had it on my SGSII, attached it to a TPU case. It worked pretty good too but the back is so nice on the nexus4 that I didn't want to cover it entirely so I was gunning for a bumper+backscreen protector.
Either way the phone attachment comes off readily with no residue issue when it comes to it
DimeShake said:
Steelie looks really cool, but it's quite pricey for what it is. I'd mount the phone ring on a case rather than right on the back.
Click to expand...
Click to collapse
It is X_x that's the only down side. If you're pro you can semi build one your own! lol just need a strong magnet and a ball to attach on your car.
darkamikaze said:
That's how I had it on my SGSII, attached it to a TPU case. It worked pretty good too but the back is so nice on the nexus4 that I didn't want to cover it entirely so I was gunning for a bumper+backscreen protector.
Either way the phone attachment comes off readily with no residue issue when it comes to it
It is X_x that's the only down side. If you're pro you can semi build one your own! lol just need a strong magnet and a ball to attach on your car.
Click to expand...
Click to collapse
yea. i almost bought the car kit cuz i thought 35 bucks wasn't too bad. but 12 shipping is no bueno o.0
darkamikaze said:
That's how I had it on my SGSII, attached it to a TPU case. It worked pretty good too but the back is so nice on the nexus4 that I didn't want to cover it entirely so I was gunning for a bumper+backscreen protector.
Either way the phone attachment comes off readily with no residue issue when it comes to it
It is X_x that's the only down side. If you're pro you can semi build one your own! lol just need a strong magnet and a ball to attach on your car.
Click to expand...
Click to collapse
thanks! bought one. this is exactly what i was looking for!
http://www.rammount.com/NewProducts/RAMxgripmount/tabid/4515/Default.aspx
Works like a champ.
I pray someone creates an inductive charging car stand/holder for us.
if there's anyone else looking to buy the steelie, the shipping is only $5 on amazon.
http://www.amazon.com/gp/product/B005O5WSTW/ref=ox_sc_act_title_1?ie=UTF8&smid=A3M3L1LVMVCRB5
http://www.amazon.com/gp/product/B007FHX9OK/ref=ox_sc_act_title_2?ie=UTF8&smid=A2FE6D62A4WM6Q
Two that I found. I'll be purchasing one of them and trying it out soon. Says its fits the Optimus G which is essentially what this phone is.
Neo42 said:
I pray someone creates an inductive charging car stand/holder for us.
Click to expand...
Click to collapse
Yes, this exactly. I want an inductive charging mount.
The steelie looks interesting, but would probably render the induction charging useless. I wonder if the large magnet on the back would fight with the induction current from the charger base?
darkamikaze said:
A lot of people think I'm crazy for sticking something on my phone but I seriously LOVE this thing I bought ( http://www.steelie.com/)
So you pretty much put tiny dongle on the back of your phone, which sticks due to a strong adhesive and that dongle has a magnet that attaches to a ball you can stick on your car too.
I've had for awhile on my SGSII and when I removed it, it came off with no sticky residue or anything! Once I get a back screen protector for my nexus 4 I'm sticking it on there as well.
Here's a picture of my car with the car ball. http://www.flickr.com/photos/[email protected]/8111732688/in/pool-steelie
and here's another http://www.flickr.com/photos/[email protected]/8111732114/in/pool-steelie/
It's awesome because I literally walk in my car, scan the NFC sticker and stick it on the ball. SNAP on. It's adjustable since its a ball you can move it around.
The only downside was the price. It's a bit expensive but seriously, I cannot have chosen a better product.
I feel like I'm an advert for them but seriously. It's awesome. Watch their youtube video! They started from kickstarter too (random tidbit)
Click to expand...
Click to collapse
just wondering if the phone socket is reusable.
WIIWONWON said:
just wondering if the phone socket is reusable.
Click to expand...
Click to collapse
It is. I just sold my SGSII and phone socket is sitting on my desk until I apply it on my Nexus 4. They give you lifetime replacements for the sticky part that goes on the back of the phone socket, so I had them send me a new one for free.
All I need is my back screen protector and my bumper until I apply it back on
I'm using an Arkon MG114. It was cheap and does the trick. I miss my GSII t989 car dock. I don't have the bumper on my phone yet, though I think it would work.

Galaxy S 5 Car mount

Recommend the best car mount here for Galaxy S 5.
A bit more expensive, but the CraigsDocks Dock is billet aluminum and low-profile and is true one-hand operation and adjustable to work with S2, S3, S4, Note series and now the S5.
http://www.craigsdocks.com/samsung-galaxy-s3-s4-note-2-3-car-dock/
I've had mine a year and won't have to buy a new one when I upgrade to the S5 because it fits all large Samsung superphones.
It's also adjustable to work with ALL cases, including the extra large cases that have built-in batteries.
aaa111sss said:
Recommend the best car mount here for Galaxy S 5.
Click to expand...
Click to collapse
Just found this one and share it here: 3in1 Car Mount Kit for SamsungS5
I will be hoping to get The Air Dock shortly after my S5. This will be the best car dock hands down. Just need to make sure the S5 wireless charging covers or stickers don'd take long to arrive.
http://www.indiegogo.com/projects/the-air-dock
For everyone that wants an affordable car dock WITHOUT glass suction cups, I would get this:
http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
fits in your CD SLOT. it's GENIUSSS, just look at allt he reviews. its perfect eye level for the driver too!
Sublim3_Tilt said:
I will be hoping to get The Air Dock shortly after my S5. This will be the best car dock hands down. Just need to make sure the S5 wireless charging covers or stickers don'd take long to arrive.
http://www.indiegogo.com/projects/the-air-dock
Click to expand...
Click to collapse
The air dock is what ultimately tipped the balance for me getting an S5, after seeing it I knew built-in Qi charging was a must have and since Sprint only offers the Nexus 5 in 16GB flavor (not nearly enough, I've got 15GB of stuff on my SD card today which easily exceeds the 12GB formatted capacity, not to mention 2 years from now).
Hope they will make something like this one :
http://www.miniinthebox.com/fr/univ..._61995588663&gclid=CKSBsJ7Mv70CFWXnwgodN4QAIw
Air Dock hands down.
Another vote for Craigsdocks. Absolutely the most adaptable car dock out there. Very well designed and crafted. Well worth the the cost.
Sent from my SCH-I545 using Tapatalk
Acaibowl said:
Air Dock hands down.
Click to expand...
Click to collapse
It looks nice but the expense of it, $70 +20 for the charging coil, then still need a car charger so there's another $30(for an OEM)its a lot of money.
I got one of these a while back and its quite good, just make sure to hold the back of the phone whilst removing or sometimes the back cover comes lose on a clip or two with S4, the magnetism is quite strong.
homer285 said:
It looks nice but the expense of it, $70+20 for the charging coil, then still need a car charger so there's another $30(for an OEM)its a lot of money.
I got one of these a while back and its quite good
Click to expand...
Click to collapse
How can it be good when it doesn't even charge the phone?
Acaibowl said:
How can it be good when it doesn't even charge the phone?
Click to expand...
Click to collapse
Because its so hard to plug in USB lol, is it really worth an extra $75? Also there's no way that thing could output 2A so charging is going to be much slower, just my opinion.
I just order this Car Mounthttp://www.amazon.com/gp/aw/d/B00C9...qid=1396885686&sr=8-11&pi=AC_SX110_SY165_QL70 yesterday. Should be here tomorrow or Thursday with prime shipping.
chillsen said:
For everyone that wants an affordable car dock WITHOUT glass suction cups, I would get this:
http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
fits in your CD SLOT. it's GENIUSSS, just look at allt he reviews. its perfect eye level for the driver too!
Click to expand...
Click to collapse
have you ever used this before? I'm curious to know if it would cause any damage to the internals of the CD slot. I see it has amazing reviews at Amazon (which I trust for the most part) but wondering if you had any personal experience with it...
if it looks to be good, I may get one for the S5 and my iPad Mini (for a long road trip later this summer)
co.ag.2005 said:
have you ever used this before? I'm curious to know if it would cause any damage to the internals of the CD slot. I see it has amazing reviews at Amazon (which I trust for the most part) but wondering if you had any personal experience with it...
if it looks to be good, I may get one for the S5 and my iPad Mini (for a long road trip later this summer)
Click to expand...
Click to collapse
Didn't forget about you:
http://i.imgur.com/YQIh3lT.jpg
http://i.imgur.com/ZNeaWhv.jpg
notice my cd changer is curved out but the rubber "fins" still fit snug and very sturdy. They are rubber and do no damage. if for some reason it just will not fit in there on your car model, you can always send it back worry free (with Prime) but it shouldn't be a problem. the grip has a light rubber pad and is controlled by a spring action adjustment. I love it because i can easily place my phone into it by pushing my phone up and in. I take it out with the same motion, press up and pull out. it is made in Korea and the material and parts are very well made.
I really don't know why some of the people here are buying 50-70 dollar suction phone mounts. that is a total rip off.
Here is the link again: http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
chillsen said:
Didn't forget about you:
http://i.imgur.com/YQIh3lT.jpg
http://i.imgur.com/ZNeaWhv.jpg
notice my cd changer is curved out but the rubber "fins" still fit snug and very sturdy. They are rubber and do no damage. if for some reason it just will not fit in there on your car model, you can always send it back worry free (with Prime) but it shouldn't be a problem. the grip has a light rubber pad and is controlled by a spring action adjustment. I love it because i can easily place my phone into it by pushing my phone up and in. I take it out with the same motion, press up and pull out. it is made in Korea and the material and parts are very well made.
I really don't know why some of the people here are buying 50-70 dollar suction phone mounts. that is a total rip off.
Here is the link again: http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
Click to expand...
Click to collapse
thanks for the detailed write-up and pics! I have the phone and iPad version sitting in my Amazon wishlist right now... maybe will push them to checkout next payday
Upon inspection of both of my vehicles, it looks like it will work really well and actually sit at a great height (within arms and eyes reach) and not block any controls to anything else (only blocking a clock in my Civic and a clock/temp screen in my Highlander)
thanks again :good:
chillsen said:
Didn't forget about you:
http://i.imgur.com/YQIh3lT.jpg
http://i.imgur.com/ZNeaWhv.jpg
notice my cd changer is curved out but the rubber "fins" still fit snug and very sturdy. They are rubber and do no damage. if for some reason it just will not fit in there on your car model, you can always send it back worry free (with Prime) but it shouldn't be a problem. the grip has a light rubber pad and is controlled by a spring action adjustment. I love it because i can easily place my phone into it by pushing my phone up and in. I take it out with the same motion, press up and pull out. it is made in Korea and the material and parts are very well made.
I really don't know why some of the people here are buying 50-70 dollar suction phone mounts. that is a total rip off.
Here is the link again: http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
Click to expand...
Click to collapse
co.ag.2005 said:
thanks for the detailed write-up and pics! I have the phone and iPad version sitting in my Amazon wishlist right now... maybe will push them to checkout next payday
Upon inspection of both of my vehicles, it looks like it will work really well and actually sit at a great height (within arms and eyes reach) and not block any controls to anything else (only blocking a clock in my Civic and a clock/temp screen in my Highlander)
thanks again :good:
Click to expand...
Click to collapse
I ordered a similar one, well basically identical, and it fits superbly in my 2008 honda accord exl. It sits just below all the controls. I was some what worried about it not reaching out far enough as the cd player is recessed when compared with all the radio and nav controls. But it's about as perfect as possible. The best part about this mount in my opinion is that it keeps a person like myself from having to many items on the windshield. Without this I'd have- Radar Detector, Phone, toll tag, and gps, way to many things, phone being the largest of them all. Anyway, I'll take some pictures and maybe a mini review later. I highly recommend to anyone who want a good out of the way docking solution.
Pure+ said:
I ordered a similar one, well basically identical, and it fits superbly in my 2008 honda accord exl. It sits just below all the controls. I was some what worried about it not reaching out far enough as the cd player is recessed when compared with all the radio and nav controls. But it's about as perfect as possible. The best part about this mount in my opinion is that it keeps a person like myself from having to many items on the windshield. Without this I'd have- Radar Detector, Phone, toll tag, and gps, way to many things, phone being the largest of them all. Anyway, I'll take some pictures and maybe a mini review later. I highly recommend to anyone who want a good out of the way docking solution.
Click to expand...
Click to collapse
thanks! I'd love to see pictures. I have an '08 civic ex... by looking at my dash, it seems like it would sit above all my controls and only cover up that little screen that shows the radio station and the time.
co.ag.2005 said:
thanks! I'd love to see pictures. I have an '08 civic ex... by looking at my dash, it seems like it would sit above all my controls and only cover up that little screen that shows the radio station and the time.
Click to expand...
Click to collapse
I'll take pictures when I get home this afternoon. I forgot my camera at home today. Was a bit flustered this morning. But I'll get you some pics for sure.
Pure+ said:
I'll take pictures when I get home this afternoon. I forgot my camera at home today. Was a bit flustered this morning. But I'll get you some pics for sure.
Click to expand...
Click to collapse
thanks :good: and no rush

Categories

Resources