This is my first kernel for i9105/i9105p
This is early version. more features will be added in future.
I DONT OWN THE DEVICE SO PLEASE BE PATIENT
Warning : I am not responsible for any damage to your phone.Read before downloading or posting in the threadroceed with caution if you have no experience.
Features;
1. OC support.
2. Compiled with latest Linaro toolchain 4.7.4
kernel v0.3
i9105 http://www.mediafire.com/download/q28fv462qiqapme/9105kernel_v0.3.zip
i9105p http://www.mediafire.com/download/rkpfiwk889x5vv8/9105pkernel_0.3.zip
Kernel flasher i9105 v1.zip http://d-h.st/Cqz
Kernel flasher i9105p v1.zip http://d-h.st/GXE
flash through cwm
Changelog:-
Version 0.1 - initial commit.
Version 0.2 -
Added BFQ-v6 r2 for 3.0 kernel.
OC support.
Gental fair schedulers disabled.
Enabled ARCH POWER.
Version 0.3 -
Optimized SLUB memory allocator
Added 4 CPU governores
Added filesystem dynamic read-ahead …
Added Fast Random generator support (frandom)
Dynamic sync control by faux123
Issues :-
Dont set your CPU frequency at highest i.e 1.5
credits:
Dorimanx
Sources: https://github.com/k2wl/i9105Sammy.git
https://github.com/k2wl/i9105psammy.git
Only stock Rom?
Btw, which one is for Odin. Which one is for cwm?
Sent from my GT-i9105P using xda premium
Brian_SGW_CM9 said:
Only stock Rom?
Btw, which one is for Odin. Which one is for cwm?
Sent from my GT-i9105P using xda premium
Click to expand...
Click to collapse
both r for cwm
k2wl said:
both r for cwm
Click to expand...
Click to collapse
Sorry but below that it says installation
Via Odin?
Btw only stock rom?
Sent from my GT-i9105P using xda premium
Brian_SGW_CM9 said:
Sorry but below that it says installation
Via Odin?
Btw only stock rom?
Sent from my GT-i9105P using xda premium
Click to expand...
Click to collapse
post corrected!!!
Also i think wifi issue should be corrected with new kernel flashers!!!
Assert failure again
I've read that apparently the solution is to delete the assert line from updater-script?
Sent from my GT-I9105 using xda app-developers app
corduroy84 said:
Assert failure again
I've read that apparently the solution is to delete the assert line from updater-script?
Sent from my GT-I9105 using xda app-developers app
Click to expand...
Click to collapse
can you plz write exact error code???
k2wl said:
can you plz write exact error code???
Click to expand...
Click to collapse
assert failed: getprop(''ro.product.device==''s2ve'' ll
getprop(''ro.build.product'') == ''s2ve''
My phone is i9105
Sent from my GT-I9105 using xda app-developers app
Flashed from CWM success!, congratz k2wl
One more thing... please can you add the changelog for v1?
"Changelog:
Version 1.0 :
Overclocked upto 1.5 Ghz [Experimental and still a WIP]
Performance governor patched to open up both cores[Andreilux]
Activated Interactive governor
Added 1 new governors: ZZmoove.
Activated and tweaked conservative governor
Enabled 6 new TCP Congestion controls viz. Westwood, Vegas, BIC, HSTCP, HTCP
Set westood as default from cubic.
Version 0.1 : initial commit.
Version 0.2 :
Added BFQ-v6 r2 for 3.0 kernel.
OC support.
Gental fair schedulers disabled.
Enabled ARCH POWER."
---------- Post added at 07:57 PM ---------- Previous post was at 07:22 PM ----------
Kernel is installed but... there is no new governor ZZmoove (like installation prays)
Captures:
Frecuencies
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Governors
Shredulers
Only variations of Mghz are included?
Flash with cmw works well. But like klurosu say no special governor or scheduler. Wlan works well.
THanks.
Gesendet von meinem GT-I9105P
so cwm zip for i9105p is working but i9105 is not working???
and @klurosu it is just first ever release just be patient man...i will add more governers and more to the kernel...& cwm is success for u means only i9105 should be corrected.
can somebody please give me build.prop of i9105???
k2wl said:
so cwm zip for i9105p is working but i9105 is not working???
and @klurosu it is just first ever release just be patient man...i will add more governers and more to the kernel...& cwm is success for u means only i9105 should be corrected.
can somebody please give me build.prop of i9105???
Click to expand...
Click to collapse
Roger that (my apologies for be so impatience)
is UnderVoltage also coming, thanks OP for this great work.
OurJerry said:
is UnderVoltage also coming, thanks OP for this great work.
Click to expand...
Click to collapse
Undervoltage is incorporated, see the pic:
klurosu said:
Undervoltage is incorporated, see the pic:
Click to expand...
Click to collapse
That is underclocking, not undervolting.
OurJerry said:
That is underclocking, not undervolting.
Click to expand...
Click to collapse
It's true!... owned!
It's sure that k2wl is working on that
klurosu said:
It's true!... owned!
It's sure that k2wl is working on that
Click to expand...
Click to collapse
Hahahahahaha
This is the best reaction ever !!
You are Win ! hahahaha :victory:
OurJerry said:
Hahahahahaha
This is the best reaction ever !!
You are Win ! hahahaha :victory:
Click to expand...
Click to collapse
hehehehehe, my apologies dude
Sometimes my quickly responses aren't good as I wish
p.s. whiskey mode ON
k2wl said:
can somebody please give me build.prop of i9105???
[/I]
Click to expand...
Click to collapse
http://db.tt/n4bGagE8
Sent from my GT-I9105 using xda app-developers app
plz try new kernel flasher for i9105
can somebody plz try kernel flasher i9105 attached to this post.
if this works then i will update the op.
Related
There were many people asking me to release my kernel for a long time. Here I release my kernel.
FEATURES
1. Fast and smooth
2. Governors
Interactive
conservative
SmartassV2
Lionheart
Performance
3. I/O schedulers
noop
deadline
vr
sio
4. Undervolt
5. Ext4 Support
6. Ext2 or ext3 is mounted as EXT4
7. CIFS and TUN support
8. NTFS supported
9. swap and zram support
10. Custom Bootanimation functionality
11. CF-rooted
12. Kernel for Stock DDKT3 ROM also added
Click to expand...
Click to collapse
If any bugs are found please feel free to comment below as I am only a 15 years old developer who runs out of time to develop the boosters for the others
If you want any feature to be removed or added please comment below
My github sources are yet to be uploded. Will upload them soon
If you like my work please dont hesitate to press the thanks button
DOWNLOAD
Release 2(CF-Rooted)
Release-1(For stock and Other ROMs except the ROMS with CF-Root kernel)
Release-1
Click to expand...
Click to collapse
Credits
1.zcop
2.adi_pat
3.sakindia123
4.wilfredcool007
5.pratyush.creed
6.speedbot
Click to expand...
Click to collapse
If you like my work please dont hesitate to press the THANKS button
Who believe in Benchmarks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Patch for those who want to use the CF-Root kernel in the ROM which do not had CF-root or facing the Wifi Error
PATCH-1
Click to expand...
Click to collapse
finally you released your kernel will try asap.....
yajnab said:
Reserved this too
Click to expand...
Click to collapse
For cyanogenmod or stock??.....
Sent from my GT-S5670 using xda premium
speed_bot said:
finally you released your kernel will try asap.....
Click to expand...
Click to collapse
It will be my pleaseure
droider007 said:
For cyanogenmod or stock??.....
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Stock. WIll be working on the cyanogenmod kernel for the cm10. not for the Gingerbread. by the way have u got the reply to the PM???
Nice work bro, i will try it when i put another sotck based on my fit :good:
Anyway what stock based will be better to use ur kernel?
Hi its for stock rom or cyanogenmod 10
Missing governor that called Smartassv2 it's my favorite one .
But nice work I'll try on creeds v4
Haluki_BR said:
Nice work bro, i will try it when i put another sotck based on my fit :good:
Anyway what stock based will be better to use ur kernel?
Click to expand...
Click to collapse
Please try with the Hyperdroid v1 or any other custom ROM. Not for stock .
fitranger said:
Hi its for stock rom or cyanogenmod 10
Click to expand...
Click to collapse
For GB based custom ROMS. . For best results try Hyperdroid v1. Wifi bugs are found in the Fitdroid v3.5 and Razodroid.
samo_gf said:
Missing governor that called Smartassv2 it's my favorite one .
But nice work I'll try on creeds v4
Click to expand...
Click to collapse
This was the initial release. The next release will have the smartassv2 and one more governor. 2 governors will be replaced and one will be deleted to make the kernel more fast. IO scheduler will be also replaced. Stay tuned . Next relesase coming soon.......
Nice kernel!u can take a look at this- https://github.com/sakindia123/Cranium_Kernel
It's my fully modded kernel for Galaxy S Plus,and it's a .35 kernel(same as fit) u can do some cherry-picks if u want
sakindia123 said:
Nice kernel!u can take a look at this- https://github.com/sakindia123/Cranium_Kernel
It's my fully modded kernel for Galaxy S Plus,and it's a .35 kernel(same as fit) u can do some cherry-picks if u want
Click to expand...
Click to collapse
Will surely do that ..... Thanx for the help:laugh:
yajnab said:
Will surely do that ..... Thanx for the help:laugh:
Click to expand...
Click to collapse
Just a request could you compile kernel for cm9 and cm10 for our device will be very grateful cause we could then move on to ics and its nearly stable some minor bugs left to deal with and already have thewisps cm9.1 port working.
Dark Passenger said:
Just a request could you compile kernel for cm9 and cm10 for our device will be very grateful cause we could then move on to ics and its nearly stable some minor bugs left to deal with and already have thewisps cm9.1 port working.
Click to expand...
Click to collapse
From today I am a member of the Jellaxy team. Will be developing cm10 and ICS/JB kernels for the Galaxy FIt
yajnab said:
From today I am a member of the Jellaxy team. Will be developing cm10 and ICS/JB kernels for the Galaxy FIt
Click to expand...
Click to collapse
congrats......so when are u starting.....??
droider007 said:
congrats......so when are u starting.....??
Click to expand...
Click to collapse
Thats nearly like asking a eta:laugh:
Though i am mighty exicited too finally we get a dev with a device.
Proud of u little dev..
i hope u remember me..
carr on the good work..!
respects..!!!
Hello everyone.
I have made a kernel for you all! I was making this kernel for my new ROM (Axiom rom) but I stopped the project so I am releasing my kernel here. The kernel is made out of Samsung Open source Update 3. the kernel has been patched to 2.6.35.14. The actual number of builds are over hundred but I am using #3 because its my birthday
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
Version 1.0 : http://d-h.st/myd mediafire mirror : http://www.mediafire.com/?kivdoiqw42h6571
md5sum: 4c458f100660154f77f40b7bdd548f2a
Swapon script : http://d-h.st/sWG
Please do not mirror, or no more updates.
Features:
Basic:
Overclock support to 1.2Ghz
ext2 support - untested
ext3 support - untested
ext4 support
swapon support
zram support
cifs support
vvpn support
firewall/Netfilter support
Frequencies:
104 Mhz
156 MHz
312 MHz
468 MHz
624 MHz
832 MHz
936 MHz
1248 MHz
Governors:
hotplug
wheatley
smoothass
smartassV2
smartass
scary
savagedzen
ondemandx
minmax
lulzactive
lazy
lagfree
interactivex
interactive
intellidemand
brazillianwax
conservative
ondemand
userspace
powersave
bcm21553
lionheart
performance
I/O Schedulers :
bfq
noop
deadline
cfq
vr
sio
zen
Credits:
Kuro - for his ramdisk
Maroc-OS for his github source
Irfanbagus - for his guide
white xp - for zRam
zecn - for his source on github
IF I MISSED ANYONE THEN PM ME. I will add his/her name.
Screenshots for features(only 3 screenshots for zRAM, OC and kernel name)
1. zRAM proof:
2. OC proof :
3. Kernel name with version :
SOURCE :
I couldnt figure out Github. So i have uploaded it to dev-host. the package is of 118mb.
Kernel source : https://bitbucket.org/axiom1998/axiom-kernel-source-masterhttp://d-h.st/OAN
Instructions :
Boot to recovery mode
Flash CWM.
Choose - Install from sdcard
Choose axiom1-0_Signed.zip
Choose YesIf you are using any other kernel, be sure to delete 99complete to avoid bootloops.Have a nice day
reserved for changelogs
reserved.. just in case
ahuh, support ext4 system with battery charging fix when phone is turned off?
reserved!
ronnieryan said:
ahuh, support ext4 system with battery charging fix when phone is turned off?
Click to expand...
Click to collapse
I am sorry but I was unable to test the whole kernel because my galaxy y is damaged.. The power button doesnt work, USB doesnt work and all.. My phone has all the issues in hardware.. So i cant even repair it. You can test it for sure..
Reserved
Does psychos cm7 is supported?
Sent from my GT-S5360 using xda premium
reserved!!!
edit: what about deep sleep? is it working?
Aniruddh Chandratre said:
Hello everyone.
I have made a kernel for you all! I was making this kernel for my new ROM (Axiom rom) but I stopped the project so I am releasing my kernel here. The kernel is made out of Samsung Open source Update 3. the kernel has been patched to 2.6.37.14. The actual number of builds are over hundred but I am using #3 because its my birthday
[*]IF I MISSED ANYONE THEN PM ME. I will add his/her name.
[/LIST]
[/INDENT]
[/INDENT]
If you are using any other kernel, be sure to delete 99complete to avoid bootloops.
[/INDENT]
Have a nice day
Click to expand...
Click to collapse
Will Try and Report
Seems to be good one.
Whether the overclock is Real !
and It's like a Copy of Eve Kernel.
kael2404 said:
Does psychos cm7 is supported?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
It may be supported. Try it.. my SGY is bad.. USB doesnt work.. so didnt test it.
Asmy Yuh said:
reserved!!!
edit: what about deep sleep? is it working?
Click to expand...
Click to collapse
It is.
Samuel IP said:
Will Try and Report
Seems to be good one.
Whether the overclock is Real !
Click to expand...
Click to collapse
Check.. but whats the need to quote the whole thing?
Samuel IP said:
Will Try and Report
Seems to be good one.
Whether the overclock is Real !
Click to expand...
Click to collapse
No OC in Broadcom devices is Real...
nolinuxnoparty said:
No OC in Broadcom devices is Real...
Click to expand...
Click to collapse
Does that mean Maroc-OS was trolling so hard?? It can be..
Aniruddh Chandratre said:
Does that mean Maroc-OS was trolling so hard?? It can be..
Click to expand...
Click to collapse
Dude, Maroc Sir gave his best!
And he gave galaxy y community so much!!
Sry about the whole quoting ..i've cut shorted it.
I've tried two overclocked Kernels merruk and Eve by Zenc
Merruk was like a true Overclock cuz wen i set the freq to 200-200 the performance will drop and increase in 1.2-1.2 (but it has minor bugs)
but Eve kernel gave same performance at all freq' made me think it may be fake. (but bugless)
So Can u tell the performance of AXIOM kernel..any bugs..
does not work on cm7
So when did you become Linus Torvalds?
I never knew you could hack the kernel to 2.6.37.14. Awesome job.
Maybe you could teach me how to do that?
kael2404 said:
does not work on cm7
Click to expand...
Click to collapse
Ramdisk issue.. I will have a look at it..
gadgetroid said:
So when did you become Linus Torvalds?
I never knew you could hack the kernel to 2.6.37.14. Awesome job.
Maybe you could teach me how to do that?
Click to expand...
Click to collapse
thank you to point the mistake. It has been repaired.
Aniruddh Chandratre said:
Ramdisk issue.. I will have a look at it..
thank you to point the mistake. It has been repaired.
Click to expand...
Click to collapse
Neva mind
Humans make mistake, don't they?
Samuel IP said:
Sry about the whole quoting ..i've cut shorted it.
I've tried two overclocked Kernels merruk and Eve by Zenc
Merruk was like a true Overclock cuz wen i set the freq to 200-200 the performance will drop and increase in 1.2-1.2 (but it has minor bugs)
but Eve kernel gave same performance at all freq' made me think it may be fake. (but bugless)
So Can u tell the performance of AXIOM kernel..any bugs..
Click to expand...
Click to collapse
Good point. And the features in this new kernel looks more or less similar to Eve_kernel
EDIT: What the heck is "wpn support". Shouldn't it be "vpn support"?
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
* You are making these modifications to your phone
* I accept no responsibility of the consequences, if any for flashing this kernel
*/
This kernel supports CM10 & MIUI
New FXP releases include boot.img in update zip, this will flash over riches kernel
Flash this kernel again after installing a FXP update
F.A.Qs
When are new versions released?
I try to release updates every Monday
My device rebooted or crashed, help
Get me /proc/last_kmsg on pastebin or other appropriate site.
Please be aware I may already be informed on some issues.
Do I need to wipe anything along with flashing this?
It is recommended but not required to wipe cache and dalvik-cache in recovery
Does this kernel have X, Y mod?
Research, check features, changelog & commits
Code:
[B]Riches Kernel 0.6.2[/B]
Compiled using Linaro 4.8 2013/10
Dual Recovery (CWM & TWRP) [URL="http://forum.xda-developers.com/showpost.php?p=47353937&postcount=70"](instructions)[/URL]
Compiled using -O3
CPU Governors: Smartassv2, minmax, OndemandX
I/O schedulers: SIO (default)
1.53Ghz overclock all devices
GPU OC: 200Mhz (Tapioca, Mesona)
GPU OC: 355Mhz (JLO)
Dynamic File Sync 1.2
USB: Fast Charge [URL="http://forum.xda-developers.com/showpost.php?p=47354188&postcount=71"](instructions)[/URL]
Frandom Support (I recommend [URL="http://forum.xda-developers.com/showthread.php?t=2113150"]CrossBreeder[/URL] to make use of this)
Other tweaks
Code:
[FONT="Arial Narrow"][COLOR="Magenta"]INSTRUCTIONS[/COLOR][/FONT]
Flash kernel using fastboot
[COLOR="Magenta"][FONT="Courier New"]fastboot flash boot boot.img[/FONT]
[FONT="Courier New"]fastboot reboot[/FONT][/COLOR]
Go to settings > About Phone > Kernel Version
to check you have the kernel installed
[FONT="Arial Narrow"][COLOR="Magenta"][B]DOWNLOAD[/B][/COLOR][/FONT]
[URL="https://drive.google.com/folderview?id=0B58MLhv6S88ccW9WSVFKalFsM0U&usp=sharing"]Here[/URL]
[B]Codenames[/B]
Tipo - Tapioca
Miro - Mesona
J - JLO
E - Nanhu
Sources: Github
If you enjoy my work and want to give me incentive to continue working on it please donate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paypal
Yay!
Does it have overclock for tipo? If it doesnt, there's a hope you can make it?
I'll download in some minutes and test :good:
Edit: Everything is okay
I added and tested OC personally on my tipo. Its simply not stable, phone reboots every couple of minutes.
OC should be fine on JLO / Nanhu when I release it.
By me on CM10 strange behavior.
Many times i want open paks but not posiible.
Sent from my Xperia J using xda app-developers app
daniel.sanx10 said:
By me on CM10 strange behavior.
Many times i want open paks but not posiible.
Sent from my Xperia J using xda app-developers app
Click to expand...
Click to collapse
Riches kernel for xperia J hasn't been released yet. I'll update the thread in a couple of days when it is.
great to see new developer here thz you.i am waiting for JLO :good: :good: :good:
Copycat of Vegeance kernel
But Vengeance dont have smartass, v2 governers
Sent from my Xperia Miro using xda premium
Compare changelogs.
@joebonrichie
Don't release rom/kernel for device you don't own. You may f**** up someone's xperia like some 'devs' already did.
Freakin' great kernel. I was just looking for a CM10 kernel, as I moved to this rom. Can't wait for J release, and then TWRP recovery and OC if possible
lozohcum said:
Compare changelogs.
@joebonrichie
Don't release rom/kernel for device you don't own. You may f**** up someone's xperia like some 'devs' already did.
Click to expand...
Click to collapse
Dafuq, why when im using vengeance theres no smartass governer??! Hmm will try this kernel.
Sent from my Xperia Miro using xda premium
Riches kernel for JLO and Nanhu is almost ready to go I need a couple of testers to confirm it is working before I release.
PM if interested. Make sure you have CM10 installed, are competent using fast boot and know how to get a log cat if needed.
first : nice work bro
second : please can you make oc up to 2ghz for jlo , cause i think the snapy s1 is enable to survive such high freqs ...
joebonrichie said:
Riches kernel for JLO and Nanhu is almost ready to go I need a couple of testers to confirm it is working before I release.
PM if interested. Make sure you have CM10 installed, are competent using fast boot and know how to get a log cat if needed.
Click to expand...
Click to collapse
Hey can you make flashable zip of this kernel.
Sent from my C1604 using Tapatalk
AgroCPU said:
first : nice work bro
second : please can you make oc up to 2ghz for jlo , cause i think the snapy s1 is enable to survive such high freqs ...
Click to expand...
Click to collapse
Yea, or maybe make oc 2.4GHz and add 1GB ram. And if you can, compile bigger screen and increase camera megapixeles...
Hard at work for JLO & Nanhu release
https://github.com/joebonrichie/riches-kernel-sony-msm7x27a/commits/master
AgroCPU said:
first : nice work bro
second : please can you make oc up to 2ghz for jlo , cause i think the snapy s1 is enable to survive such high freqs ...
Click to expand...
Click to collapse
2 ghz? 1.3 its to much
Sent from my ST26i using xda premium
lozohcum said:
Yea, or maybe make oc 2.4GHz and add 1GB ram. And if you can, compile bigger screen and increase camera megapixeles...
Click to expand...
Click to collapse
2010matej said:
2 ghz? 1.3 its to much
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
hmm i think 1,5ghz can be stable but ,i know, 2ghz are unstable as hell but is simply want to test it
AgroCPU said:
hmm i think 1,5ghz can be stable but ,i know, 2ghz are unstable as hell but is simply want to test it
Click to expand...
Click to collapse
You simply want to destroy xperia processor,right?:laugh:
i want to test highest freq ... when i kill my j ... then is it so .. XD
i hate my xj more than my notebook ....
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
* You are making these modifications to your phone
* I accept no responsibility of the consequences, if any for flashing this kernel
*/
Well this is kernel for CM11 for xperia e it can be overclocked up to 1.53GHz with few extra I/o schedulers and cpu governors {More things comming soon.}
Post features that you would like in this kernel in coments , iI dont feel like there is anything else to say right now so yeah..
USE THIS init.d SCRIPT TO ENABLE FRANDOM
https://mega.co.nz/#!cYZRhShL!ddlBrHjEYfaBUrbrktjDVztenPKDXfPc81CItDXIicc
Download : https://mega.co.nz/#!wB5yCaZb!QSakdrGWd79RgIVCUWtrmruq-YQTVEID8j-Ft5v_O4U
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update 1: Overclock
Update 2:Added few I/O Schedulers (You can see them on the pic.) added SmartassH3 Governor
Update 3; Added Frandom (Speeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeed )
Developer settings and Performance tab are activated by clicking 6 times on Build Number in About Phone
init.d script goes in etc/init.d
Post any requests in comments.
Oh and big thanks to whole TamsuiCM11 team.
Source Code https://github.com/ivanmeler/android_kernel_sony_msm7x27a-1
great thanks :good: i go try it
@Ivan_Meler what recovery does it has?:what:
Sent from my Xperia E using Tapatalk
latest CWM
Sent from my Xperia E using xda app-developers app
Ivan_Meler said:
latest CWM
Sent from my Xperia E using xda app-developers app
Click to expand...
Click to collapse
i install this but on info about phone i dont have there this processor
tubabuyukustun said:
i install this but on info about phone i dont have there this processor
Click to expand...
Click to collapse
Tap build number several times u will get performance option in settings
Sent from my Xperia E
AGuyfromH3LL said:
Tap build number several times u will get performance option in settings
Sent from my Xperia E
Click to expand...
Click to collapse
now is ok thanks
Where is the kernel source?
Its on my github I'll post link as soon as I get home this was thread I wrote in 2 min. so I forgot to post it
Sent from my Xperia E using xda app-developers app
Everything is working thanks :thumbup:
Does it works for xperia tipo dual?
Kapil
teck_keeda said:
Does it works for xperia tipo dual?
Kapil
Click to expand...
Click to collapse
Please read the title properly before posting
I have read the title, this thread is made under xperia u, tipo, and e that why i m asking...
You can post as yes or no also
I m looking for my xperia tipo 4.4 rom and not getting it thats why i asked...
Kapil
teck_keeda said:
I have read the title, this thread is made under xperia u, tipo, and e that why i m asking...
You can post as yes or no also
I m looking for my xperia tipo 4.4 rom and not getting it thats why i asked...
Kapil
Click to expand...
Click to collapse
It's for E. Not for Tipo.
Great work!! ..... mention the steps to enter the performance menu in OP ..(newbies will find it useful....and you don't want to type it every time)
install instructions should also be mentioned
and as lozo mentioned 'them sources'
if you could get into making the rom more stable that would be great!
will try 2day
Grimlock007 said:
Great work!! ..... mention the steps to enter the performance menu in OP ..(newbies will find it useful....and you don't want to type it every time)
install instructions should also be mentioned
and as lozo mentioned 'them sources'
if you could get into making the rom more stable that would be great!
Click to expand...
Click to collapse
I would say it is more stable with this i dont get random reboots when i turn WiFi/Bluetooth/GPS on or off
And source will be posted here in next update (today), I added few more I/O Schedulers and Governors ill try to add few more things and new version with updated Post will be here
Update 2 is out Added few I/O schedulers and SmartassH3 CPU Governor
Source code can be found in 1st post
update 3: added frandom
Ivan_Meler said:
Update 2 is out Added few I/O schedulers and SmartassH3 CPU Governor
Source code can be found in 1st post
update 3: added frandom
Click to expand...
Click to collapse
port it for cm10 too ...maybe? ...(if possible)
and where do you get the codes from ? another kernel? or straight from source ?
Grimlock007 said:
port it for cm10 too ...maybe? ...(if possible)
and where do you get the codes from ? another kernel? or straight from source ?
Click to expand...
Click to collapse
I got them from cm11 source, I might port it to cm10 one day but since I am using CM11 On daily bases i cant test it right now.
Oh and since there is now frandom CM11 is really fast and smooth
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: I am not responsible for anything that happens to your phone
Let's skip the long OP shall we?
Features:
- Compiled with ARM-EABI-4.7
- CK3 Tweaks by Con Kolivas
- Based on Samsung BCMCyanogenmod Cyanogenmod 11 Kernel (Credits:CoolDevelopment,xenon92,k2wl,KingBabusula)
- Optimised SLUB Memory Allocator
- SmartassH3,Smartass2,Adaptive,InteractiveX Governors
- SIO and V/R Scheduler on board
- Timer slack Controller (What does it means?)
- CPU Boost Driver
- Reduce Log size for better performance
- Gentle Fair Sleepers Disabled for effective performance
- BLN(BackLight Notifications)
Instructions:
- Make sure you are on Cyanogenmod 11 GT-I9105(P) ROM
- Then wipe cache,dalvik cache
- Install the zip and reboot
Downloads:http://forum.xda-developers.com/attachment.php?attachmentid=2695580&stc=1&d=1397895770
GPL Compliant Kernel Sources:https://github.com/Triprex/android_kernel_samsung_s2plus-common.git
Appreciate your thanks a lot
Build S1
-No risky underclocking or overclocking was added
-CK3 Tweaks
-cpufreq: Add a sync limit to cpu-boost
-Backport missing functions from Linux Kernel 3.4
-TEST: Reduce logger size
-[PATCH, v9] cgroups: introduce timer slack controller
-cgroup/timer_slack: fix cgroup permission errors
-Optimized SLUB memory allocator
-ARM: Add optimised swahb32() byteswap helper for v6 and above
-make register_disk() static
-mm: restrict access to slab files under procfs and sysfs
-Check out my github for latest commits
overheat? why?
silvano2 said:
overheat? why?
Click to expand...
Click to collapse
What overheat?
Cool beans,any plans on making it on 4.2.2 non cynanogen mod tho ;p ?
Thank You OP. :good:
After install this kernel phone reboot again and again and dont open. Any idea? Cm11 with art
Why kernel isn't working on AOSB?
LuK1337 said:
Why kernel isn't working on AOSB?
Click to expand...
Click to collapse
Because it's working only with CM11 i think
DenisRonaldo798 said:
Because it's working only with CM11 i think
Click to expand...
Click to collapse
AOSB is Cyanogenmod based.
anastasiszn said:
After install this kernel phone reboot again and again and dont open. Any idea? Cm11 with art
Click to expand...
Click to collapse
Dont use ART,its not stable in the latest Cyanogenmod 11
LuK1337 said:
Why kernel isn't working on AOSB?
Click to expand...
Click to collapse
AOSB is mainly for stock kerne because it consists of lots of features in it.Therefore,some tweaks may cause the kernel to crash
Sent from my iPad using Tapatalk
TripRex said:
Dont use ART,its not stable in the latest Cyanogenmod 11
AOSB is mainly for stock kerne because it consists of lots of features in it.Therefore,some tweaks may cause the kernel to crash
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Aosb is using the same kernel. The only thing which can be different(I am not sure) is the ramdisk.
Sent from my GT-I9105P using XDA Premium 4 mobile app
LuK1337 said:
AOSB is Cyanogenmod based.
Click to expand...
Click to collapse
Yeah,I know that but as the OP said make sure you are on CM11
Installs successfully on cm11 but phone gets stuck on bootloop
Remove lines 15,20,23 from https://github.com/Triprex/android_kernel_samsung_s2plus-common/blob/master/drivers/cpufreq/Makefile.
Gibz97 said:
Installs successfully on cm11 but phone gets stuck on bootloop
Click to expand...
Click to collapse
No problems for me Did you wipe cache and dalvik cache?
DenisRonaldo798 said:
No problems for me Did you wipe cache and dalvik cache?
Click to expand...
Click to collapse
Yes. I did
I have same problem with bootloader...
edit: working only with clean install and wifi not working...
anastasiszn said:
I have same problem with bootloader...
edit: working only with clean install and wifi not working...
Click to expand...
Click to collapse
Me too. usb also not working
Gibz97 said:
Me too. usb also not working
Click to expand...
Click to collapse
anastasiszn said:
I have same problem with bootloader...
edit: working only with clean install and wifi not working...
Click to expand...
Click to collapse
Will fix the bugs soon
Sent from my GT-I9082 using Tapatalk