hello guys,
i have a recent problem that i could not find a way to fix. the thing is, when i use the stick during the it's connected to tv(seeing the android on tv) it's ok. but when i switch the hdmi interface to some other device like ps3, the stick is stuck/frozen after a few minutes, so when i switch back to android i see nothing. it was identified here as mk802iii clone, and i tried the 1.7 finless rom, as well as 2dark4u's rom. none helped.
do you have any workarounds for this particular problem ?
thanks in advance.
Related
Hi!
So I've managed to connect a USB reciever (made for PCS) to the tablet USB port and got my controller working on the tablet. Literally, working. Buttons are responding and it controls everything.
However, trying to play GTA Vice City has proven futile. It appears the controller is constantly transmitting a "right camera movement" to the tablet making it "turn around the character". No matter what I tried, it appears to simply be "jammed" with this.
Since no software was installed, and the controller is basically working with builtin drivers, I was wondering whether someone tried to do the same, had the same issues and found a work around?
I had the same issue. This is a known problem, described in several topics. If your Transformer is rooted, the solution is provided here: http://forum.xda-developers.com/showthread.php?t=1792531. It's for Nexus, but works for Transformers.
For non-rooted devices, I'm afraid there is no solution.
Hi all, I'm afraid I may be a bit out of the loop on this one, so I apologize if I'm asking about a known issue. Basically, I'm running CM10, the nightlies, and I'm currently running the April 14 build based on 4.2.2. It's been a while since I updated (frankly, it's been a while since I used the tablet) and since I did, I am unable to utilize my Nyko Playpad after pairing it to the tablet as I once did. Even if I unpair/re-pair, disable/enable BT, and reboot the tablet, it pairs, but never "connects". It works over BT just fine on my laptop, so I know it's not the controller. I haven't tried a PS3 controller yet, but that may be my next experiment. I understand that there's been problems with BT in some of the latest JB builds. Am I just encountering that, or is there something else going on? Thank you for shedding any light on the problem.
similar issue here. since the 4.1.2 update i can pair and connect ONCE. after disconnecting and attempting to reconnect it will never connect. factory reset just starts the process over again, connects once and then never again.
anyone else founda fix for this?
I hope someone can point me in the right direction for this.
I have a Bluetimes MX5 android tv box for the past year or so. The HDMI has stopped working for the last few weeks.
Only the standard AV is working.
I've reflashed the image on it but still not working. I've tried different cables and TVs but all the same. The box is running a custom rom called Dharmageddon V3.
There was a glimmer of hope when I first connected after disabling auto detect hdmi settings, the picture came up for a few seconds and then went blank again.
Any ideas what could be causing this?
Hi,
It sounds like a hardware issue to me, either bad cable, or bad hdmi port on the box or TV.
You can ask for other opinions in this section though,
http://forum.xda-developers.com/hardware-hacking/android-sticks
Good luck!
Hello XDA-developers,
I bought a new tablet a few days ago and have a slight problem regarding the Mac Address. It keeps changing after turning on wifi every time.
I found mutliple answers to similar problems but they didn't work for this specific tablet.
Now, I need to know if there is a way to change it to a static Mac Address, it uses Lollipop 5.1 and I rooted it using KingoRoot for Windows.
I just made some search for myself and found a file called "setmacaddr" (without extension). I don't know if it's just a thing every tablet has or if it is the problem.
If you need more information about the tablet, don't hesitate asking me!
Sincerely,
Marvin
EDIT:
I rooted this tablet because it had the problem when it was not rooted. I needed to root it for the methods I tried till now. (Like I said, they didn't work)
Hello, it's me again,
does anybody have a clue at least what I can try to do?
Would help me very much!
Solution:
I solved the problem in a slighty different way.
I know this is not the best way but maybe someone just needs a similar solution!
I bought a USB 2.0 -OTG ethernet adapter² and connected it with the switch next to my pc, which is connected to the router. Thus, you are able to have stable internet connection without minding your MAC-Address in most of the time (like 99,9%). Of course, your tablet only gets internet while plugged into it, so you may only do this if your tablet remains in nearly the same place or if you are able to quickly wire it different.
² can't post the link to the product because I'm a new user. Any USB-2.0 OTG ethernet adapter should work, it just needs a micro usb otg plug.
Hi guys, tried to use android auto today for the first time and having absolutely no luck. Either with wireless or a cable. Car says device not recognized. I've rebooted both, deleted all devices off the cars system etc and still nothing. The phone connectsvia Bluetooth and takes calls and plays music no issue but android auto won't connect. When I plug the phone in via USB it says device not supported?
I've Googled and it seems this is a common issue. Does anyone know of a fix or having similar issues? I'm rooted so wondering is that the issue or could there be a workaround as I'm rooted instead perhaps. All suggestions welcome, thanks!
Bxperiaz3 said:
tried to use android auto today for the first time and having absolutely no luck
Click to expand...
Click to collapse
I was able to connect using these actions:
Developer settings - wireless Android Auto