How do I Get to TWRP 2.4.4.0 when I Install TWRP 2.5.0.0?
It cant recognize SDCard and i Want back to old version.
MrZi said:
How do I Get to TWRP 2.4.4.0 when I Install TWRP 2.5.0.0?
It cant recognize SDCard and i Want back to old version.
Click to expand...
Click to collapse
How are you trying to install it? Recoveries are installed by bootloader and should be in the same directory as 'fastboot.exe'.
Also have you made sure you've got the right recovery for you boot loader version (ICS, JB or 4.2)?
psjw12 said:
How are you trying to install it? Recoveries are installed by bootloader and should be in the same directory as 'fastboot.exe'.
Also have you made sure you've got the right recovery for you boot loader version (ICS, JB or 4.2)?
Click to expand...
Click to collapse
A was download WW_V10.6.1.15.3 from Asus page and Recovery openrecovery-twrp-2.4.4.0-tf300tg-JB.img.
How Can I flash it to work my Asus good? It only starts to recovery.
MrZi said:
A was download WW_V10.6.1.15.3 from Asus page and Recovery openrecovery-twrp-2.4.4.0-tf300tg-JB.img
Click to expand...
Click to collapse
Have you every upgraded your tablet to 4.2? If so DO NOT flash that recovery. It will brick your device.
---------- Post added at 11:41 PM ---------- Previous post was at 11:37 PM ----------
MrZi said:
How Can I flash it to work my Asus good? It only starts to recovery.
Click to expand...
Click to collapse
If you look at this thread http://forum.xda-developers.com/showthread.php?t=1845377
In Part 3, that explains how to flash recovery.
I personally wouldn't downgrade TWRP, is there a reason you want to downgrade?
I was upgrade to 4.2 JB Stock
How Can I get starts normal System?
MrZi said:
I was upgrade to 4.2 JB Stock
How Can I get starts normal System?
Click to expand...
Click to collapse
What do you mean by 'normal system'?
Again DO NOT flash that recovery.
You've got a 4.2 bootloader, but that recovery is for 4.1. If you apply it you WILL brick your device.
psjw12 said:
What do you mean by 'normal system'?
Again DO NOT flash that recovery.
You've got a 4.2 bootloader, but that recovery is for 4.1. If you apply it you WILL brick your device.
Click to expand...
Click to collapse
I haveCustom ROm with 4.1 and want to install another Rom with 4.2
I was install JB 4.2 from Asus page and Recovery : openrecovery-twrp-2.5.0.0-tf300tg-JB.blob
And that TWRP didnt recognize SDcard. I was wipe data and my Asus still starts to recovery.
When I adb reboot to bootloader and push OS its starts normal to OS.
I want to restore to normal boot to JB 4.2, how Can I do it?
MrZi said:
I was install JB 4.2 from Asus page and Recovery : openrecovery-twrp-2.5.0.0-tf300tg-JB.blob
Click to expand...
Click to collapse
Whilst you're on Android 4.1, you can flash openrecovery-twrp-2.5.0.0-tf300tg-JB.blob
But once you've upgraded to Android 4.2 from ASUS you must use recovery openrecovery-twrp-2.5.0.0-tf300tg-4.2.blob
MrZi said:
And that TWRP didnt recognize SDcard. I was wipe data and my Asus still starts to recovery.
When I adb reboot to bootloader and push OS its starts normal to OS.
I want to restore to normal boot to JB 4.2, how Can I do it?
Click to expand...
Click to collapse
Unfortunately I can't help you with why the SD Card didn't get recognised. I'm sure someone else will help.
There are guides around on this forum; rather than flashing the official ASUS update via recovery, it can also be done by bootloader. I think it involves 'system.blob' to be pushed to the device, and the update ZIP file to be on the /sdcard/ directory.
psjw12 said:
What do you mean by 'normal system'?
Again DO NOT flash that recovery.
You've got a 4.2 bootloader, but that recovery is for 4.1. If you apply it you WILL brick your device.
Click to expand...
Click to collapse
I was install by fastboot recovery openrecovery-twrp-2.5.0.0-tf300tg-4.2.blob but it still not recognize sdcard internal and external, why?
I was install SW from Asus page by fastboot and fastboot bootloader.
Device starts only to TWRP. I didnt know why?
When i boot device to bootloader and push system Android, it starts normal to OS and work good.
Related
I got the tablet "unlocked:, Rooted, And running clockworkmod recovery. I had over the air update to 4.1 before all this but had no issues. I downloaded a ROM for 4.1, and when I rebooted into CWM I went to wipe my data and thats when it happened. The data wipe froze. I ended up having to forcfully turn it off. Then I got bootloop. I can get into cwm but I cant find my ROM to flash it. So im literally stuck. Is there a One Click revert to stock I can use? Or anything? Many thanks to anyone who can help. Note: this is my 1st tablet - Asus Transformer tf300t
jburke90 said:
I got the tablet "unlocked:, Rooted, And running clockworkmod recovery. I had over the air update to 4.1 before all this but had no issues. I downloaded a ROM for 4.1, and when I rebooted into CWM I went to wipe my data and thats when it happened. The data wipe froze. I ended up having to forcfully turn it off. Then I got bootloop. I can get into cwm but I cant find my ROM to flash it. So im literally stuck. Is there a One Click revert to stock I can use? Or anything? Many thanks to anyone who can help. Note: this is my 1st tablet - Asus Transformer tf300t
Click to expand...
Click to collapse
I also made a backup before everything but I cant restore it. It says MD5 Mismatch. Im really stuck here...
so try to load your rom to sd card. then install from that?
naelme said:
so try to load your rom to sd card. then install from that?
Click to expand...
Click to collapse
I have no access to my sd card. The ROM I downloaded previously does not show up in CWM.
You can't flash it again from cwm by redowloding, then putting on your SD card then munt in it?
U could reflash your unit with stock ROM using fastboot. I just unbricked my unit doing that after 5 days of fighting.
This is what I did, I downloaded job update from Asus then moved the blob to c/fast boot, loaded unit to fast boot then typed
fastboot -i 0x0B05 flash system blob
But make sure our boot loader is 10.4 or it will signature mismatch, so down load the appropriate boot loader .
That's what I did at least and my unit is working again.
naelme said:
You can't flash it again from cwm by redowloding, then putting on your SD card then munt in it?
U could reflash your unit with stock ROM using fastboot. I just unbricked my unit doing that after 5 days of fighting.
Click to expand...
Click to collapse
What would my commands be to do this? Thanks
jburke90 said:
What would my commands be to do this? Thanks
Click to expand...
Click to collapse
I used
fastboot -i 0x0B05 flash system blob
read above edit.
i found the info here but had to tweak because once you upgrade bootload to 10.4 there is no going back it seems.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/
you will lose your cwm, but you can re implement it when your done.
naelme said:
You can't flash it again from cwm by redowloding, then putting on your SD card then munt in it?
U could reflash your unit with stock ROM using fastboot. I just unbricked my unit doing that after 5 days of fighting.
This is what I did, I downloaded job update from Asus then moved the blob to c/fast boot, loaded unit to fast boot then typed
fastboot -i 0x0B05 flash system blob
But make sure our boot loader is 10.4 or it will signature mismatch, so down load the appropriate boot loader .
That's what I did at least and my unit is working again.
Click to expand...
Click to collapse
Can I use a custom ROM zip and get it from that? My internet is really slow tonight and 300mb is just crawling so downloading a stock ROM will take me another hour or so.... I am rooted if that helps.
jburke90 said:
Can I use a custom ROM zip and get it from that? My internet is really slow tonight and 300mb is just crawling so downloading a stock ROM will take me another hour or so.... I am rooted if that helps.
Click to expand...
Click to collapse
it has to match your current bootloader. if you updated jellybean your bootloader version is 10.4 and that is irreversible. so find out if that rom works on your current boot loader. once you go jb you can't go back.
in short. idk. if you want your unit install a rom that is made for your bootloader. idk custom roms. i use stock os rooted.
naelme said:
it has to match your current bootloader. if you updated jellybean your bootloader version is 10.4 and that is irreversible. so find out if that rom works on your current boot loader. once you go jb you can't go back.
in short. idk. if you want your unit install a rom that is made for your bootloader. idk custom roms. i use stock os rooted.
Click to expand...
Click to collapse
It is a JB ROM so it seems like it would work (fingers crossed).
jburke90 said:
It is a JB ROM so it seems like it would work (fingers crossed).
Click to expand...
Click to collapse
let me know. if the bootloader is 10.4 it should.
jburke90 said:
It is a JB ROM so it seems like it would work (fingers crossed).
Click to expand...
Click to collapse
Well this didn't work. I found the boot.blob and did what everything said to do but still boot loops. Not sure if it was because its not stock or not. I did notice that when I put in the command to reboot, it said it reboot but the tablet did nothing..... so is there a chance that it didn't even flash? It did seem very fast.
Verify boot loader version and use stock ROM.......
Find working custom ROM. Don't brick it
naelme said:
Verify boot loader version and use stock ROM.......
Click to expand...
Click to collapse
I will do that tomorrow. How do I verify my boot loader though?
Hi. i cant use stock recovery.:crying:
i am looking for the stock recovery zip file p[ease.
saladink said:
Hi. i cant use stock recovery.:crying:
i am looking for the stock recovery zip file p[ease.
Click to expand...
Click to collapse
What are you trying to do with the stock recovery? Have you overwritten it with something?
sbdags said:
What are you trying to do with the stock recovery? Have you overwritten it with something?
Click to expand...
Click to collapse
tf700t booting RCK, result is 'booting failed'.
I have rooted tf700t, and installed custom rom/recovery.
but i want to return stock status.
More details please. Did you unlock your bootloader? Which firmware version was installed, and which custom recovery and ROM did you install?
_that said:
More details please. Did you unlock your bootloader? Which firmware version was installed, and which custom recovery and ROM did you install?
Click to expand...
Click to collapse
bootloader was Unlocked.
latest firmware version(JB 10.4.4.25) was installed.
Now custom rom/recovery is not installed, stock fimware was installed.
Before stock firmware was installed, tf700t had beeb rooted and installed CWM Recovery/cleanrom ODEX 3.2.
and just i coverd Stock firmware in tf700t.
So you now have:
- JB bootloader
- no working recovery
- Stock 10.4.4.25 Android, unrooted
In this situation, you need to install a recovery using fastboot from a PC via USB. The easiest way would be to first flash CWM again, then use that to install the stock recovery.
Why do you want to revert to stock firmware?
_that said:
So you now have:
- JB bootloader
- no working recovery
- Stock 10.4.4.25 Android, unrooted
In this situation, you need to install a recovery using fastboot from a PC via USB. The easiest way would be to first flash CWM again, then use that to install the stock recovery.
Why do you want to revert to stock firmware?
Click to expand...
Click to collapse
Ah~~ i sold tf700t. but buyer want perfect stock status!!
Thanx!!! But i dont have stock recovery zip file.
saladink said:
Ah~~ i sold tf700t. but buyer want perfect stock status!!
Click to expand...
Click to collapse
Not 100% possible, you cannot re-lock the bootloader. Well, in theory you can, but there is no way to get Asus warranty back.
_that said:
Not 100% possible, you cannot re-lock the bootloader. Well, in theory you can, but there is no way to get Asus warranty back.
Click to expand...
Click to collapse
I know that i cannot re-lock the bootloader.
but i just want stock firmware and stock recovery.
I flashed CWM recovery and i dont have stock recovery file......:crying:
saladink said:
I know that i cannot re-lock the bootloader.
but i just want stock firmware and stock recovery.
I flashed CWM recovery and i dont have stock recovery file......:crying:
Click to expand...
Click to collapse
Get the full firmware file from Asus and flash that via CWM ... it includes the stock recovery and will overwrite your CWM.
Hmm....ThanX
After Flashing Full stock firmware, i enter into RCK, BUT red `!` is showing again.
Sent from my SHV-E210S using xda app-developers app
saladink said:
Hmm....ThanX
After Flashing Full stock firmware, i enter into RCK, BUT red `!` is showing again.
Click to expand...
Click to collapse
The "dead android" with the red "/!\" is the normal function of the stock recovery if there is no update to install.
OMG!!!!
I really didnt know that.
I have known dead android is error or custom's problem.
Now i know that. Kkkkkk
I can explain buyer dead android's mean.
Really Thanks!!
Sent from my SHV-E210S using xda app-developers app
I am on the new 4.2 bootloader and TWRP 2.4. Last night I went to upgrade TWRP. I chose the TWRP file named twrp-2.5.0.0-tf300t-4.2.blob. I renamed the file twrp.blob and pushed it out via fast boot. When done I rebooted via fastboot, and then rebooted into recovery.
Now something is not right, twrp is split into two screens horizontily and shows the lock picture on both. I have to power cylce to get back to Andriod. Where did I go wrong? Should I have chosen the .img file?
Ok I think think I realized there has been a second 4.2 bootloader update from Asus and that's my problem. Is that right?
Sent from my GT-N7100 using Tapatalk 2
yes.
A lot of people have soft bricked their device because of this.
Yeah from what I've read twrp 2.5.0.0-4.2 will only work correctly on JB bootloader 10.6.1.15.3, not sure yet if twrp 2.4.4.0-4.2 works on 10.6.1.15.3.
I have no issues with twrp 2.5.0.0-4.2 on JB 10.6.1.15.3
10.6.1.8 - TWRP 2.4.4.0-4.2
10.6.1.15.3 - TWRP 2.5.0.0-4.2
pjc21 said:
Yeah from what I've read twrp 2.5.0.0-4.2 will only work correctly on JB bootloader 10.6.1.15.3, not sure yet if twrp 2.4.4.0-4.2 works on 10.6.1.15.3.
I have no issues with twrp 2.5.0.0-4.2 on JB 10.6.1.15.3
10.6.1.8 - TWRP 2.4.4.0-4.2
10.6.1.15.3 - TWRP 2.5.0.0-4.2
Click to expand...
Click to collapse
So I have 10.6.1.8 and installed 2.5.0.0 and am experiencing the same problem (the noob proof guide wasn't very noob proof apparently). How would I go about putting on the correct version?
EDIT: So I just took the plunge and reflashed the correct version which I found http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.4.4.0-tf300t-4.2.blob here. I was initially worried because I wasnt sure if I could just flash over and downgrade versions...it worked for me, and TWRP is currently making a backup and is full screen and running.
TWRP GONE Wrong
Tunameltsalad said:
So I have 10.6.1.8 and installed 2.5.0.0 and am experiencing the same problem (the noob proof guide wasn't very noob proof apparently). How would I go about putting on the correct version?
EDIT: So I just took the plunge and reflashed the correct version which I found http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.4.4.0-tf300t-4.2.blob here. I was initially worried because I wasnt sure if I could just flash over and downgrade versions...it worked for me, and TWRP is currently making a backup and is full screen and running.
Click to expand...
Click to collapse
Ok I may be late but I am having the same problem I rooted my tf300t with motochopper not hard at all but once I tried to flash twrp I have two screens. I downloaded what the same blob file you did but not sure the command to type so I typed -i 0x0B05 flash recovery twrp.blob. What should I type?
dmont2006 said:
Ok I may be late but I am having the same problem I rooted my tf300t with motochopper not hard at all but once I tried to flash twrp I have two screens. I downloaded what the same blob file you did but not sure the command to type so I typed -i 0x0B05 flash recovery twrp.blob. What should I type?
Click to expand...
Click to collapse
Which bootloader do you have?
cmendonc2 said:
Which bootloader do you have?
Click to expand...
Click to collapse
same problem 4.2 bootloader
i update to twrp v2.6.3.0 to try and didnt work to same as 2.0.7.1
its annoying because the (normal ) working version was around 2.0....
i can go back by using terminal emulator and twrp blob instal but i want to instal cm11 so i need latest or higher than v2.6.3.0
i dont know how to make it work .
wouttii said:
same problem 4.2 bootloader
i update to twrp v2.6.3.0 to try and didnt work to same as 2.0.7.1
its annoying because the (normal ) working version was around 2.0....
i can go back by using terminal emulator and twrp blob instal but i want to instal cm11 so i need latest or higher than v2.6.3.0
i dont know how to make it work .
Click to expand...
Click to collapse
Hi, ive been searching recently but can't seem to find out how to update the bootloader. Dont hate me:'( trust me ive tried to find it myself but id really appreciate if someone could give me a link or tell me how. Thanks in advance.
So in my attemts to in stall CM 11 (http://forum.xda-developers.com/showthread.php?t=2570965) I have ruined mt tablet.
This is what I did.
1.Flashed TWRP 2.6.3.0 via (http://teamw.in/project/twrp2/97) I down loaded that latest .blob file and flashed with fastboot.
2. booted into TWRP
3. nothing would mount.... shutdown.
4. booted into my curent PAC Rom 4.3
5. Rebooted straight into recovery from the rom (I thing this is what screwed the pooch)
6. Boots into TWRP and only into TWRP but nothing is mounted. I cant get into fastboot to install the old recovery and 2.6 doesnt see any drives.
Any help would be great!
bucket81 said:
So in my attemts to in stall CM 11 (http://forum.xda-developers.com/showthread.php?t=2570965) I have ruined mt tablet.
This is what I did.
1.Flashed TWRP 2.6.3.0 via (http://teamw.in/project/twrp2/97) I down loaded that latest .blob file and flashed with fastboot.
2. booted into TWRP
3. nothing would mount.... shutdown.
4. booted into my curent PAC Rom 4.3
5. Rebooted straight into recovery from the rom (I thing this is what screwed the pooch)
6. Boots into TWRP and only into TWRP but nothing is mounted. I cant get into fastboot to install the old recovery and 2.6 doesnt see any drives.
Any help would be great!
Click to expand...
Click to collapse
To install CM11, you need the TWRP posted in the guide here: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
cmendonc2 said:
To install CM11, you need the TWRP posted in the guide here: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
Click to expand...
Click to collapse
Thanks but I cant get into Fastboot to flash that version. Is there a way I can use the flashable zip? I cant mount anything in my curent version of TWRP.
bucket81 said:
Thanks but I cant get into Fastboot to flash that version. Is there a way I can use the flashable zip? I cant mount anything in my curent version of TWRP.
Click to expand...
Click to collapse
You can try. You must be on 10.6.1.15 or above to flash the kitkat zip though.
cmendonc2 said:
You can try. You must be on 10.6.1.15 or above to flash the kitkat zip though.
Click to expand...
Click to collapse
Is there a TF300T NVflash recovery tutorial? Like what commands I need and files. I was looking at this (http://forum.xda-developers.com/showthread.php?t=1927818) it doesn't have the right files I don't think.
I have this (https://drive.google.com/#folders/0B2Gy5tiu1Omoa2FjQzBzWWhpWjg)
but no idea how to use it..... and its been a while so I don't really remember NVFlash.
bucket81 said:
Is there a TF300T NVflash recovery tutorial? Like what commands I need and files. I was looking at this (http://forum.xda-developers.com/showthread.php?t=1927818) it doesn't have the right files I don't think.
I have this (https://drive.google.com/#folders/0B2Gy5tiu1Omoa2FjQzBzWWhpWjg)
but no idea how to use it..... and its been a while so I don't really remember NVFlash.
Click to expand...
Click to collapse
Try:
Code:
nvflash --create
This will repartition and format everything back to stock. I think you will have to flash the stock ROM after that but I'm not sure how?
Tried to boot in to recovery to flash a root zip..
When i volume up to enter recovery, screen goes black. I hit power button and TWRP opens but its unusable and dual screen..top and bottom. Slide to unlock is on the screen but nothing works. Only way out is to hold down power and reset.
Help!
Motochopper not working. I run SuperUS app and get "There is no SU binary installed, and SuperSU cannot install it. This is a problem!"
I agree!
DatacomGuy said:
Motochopper not working. I run SuperUS app and get "There is no SU binary installed, and SuperSU cannot install it. This is a problem!"
I agree!
Click to expand...
Click to collapse
What bootloader are you on (its in settings app)
cmendonc2 said:
what bootloader are you on (its in settings app)
Click to expand...
Click to collapse
10.6.1.8-20130225
DatacomGuy said:
10.6.1.8-20130225
Click to expand...
Click to collapse
10.6.1.8 is compatible with very few recoveries. Upgrade it to 10.6.1.27 to flash recoveries for KitKat ROMs.
cmendonc2 said:
10.6.1.8 is compatible with very few recoveries. Upgrade it to 10.6.1.27 to flash recoveries for KitKat ROMs.
Click to expand...
Click to collapse
Asus has 10.6.1.27.5 posted. This one safe?
How do i manually update this?
DatacomGuy said:
Asus has 10.6.1.27.5 posted. This one safe?
How do i manually update this?
Click to expand...
Click to collapse
I know you can use that firmware to install KitKat ROMs as shown here (http://forum.xda-developers.com/showthread.php?p=49028315).
Use the 10.6.1.27.5 firmware with this:
Tylorw1 said:
1. Download the latest version of Android for your tablet. Make sure you download the correct SKU version.
A. To find the SKU, go into settings, About tablet, and look for your Build Number, There are two letters (such as US,WW, TW, etc.) that is your SKU. When downloading the zip from ASUS', you must download the correct SKU zip.
2. Decompress downloaded .zip file (it will be another .zip)
3. Rename it to:
A. For the TF700 and TF300: EP201_768_SDUPDATE.zip
4. Make sure your MicroSD card is formatted Fat32. It must be Fat32 Format or it will not work.
5. Copy the file to (the root directory of) your MicroSD
6. Insert the MicroSD into the tablet
7. Shutdown (power off) the tablet
8. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
9. When you see white text in the top left corner of the screen, release the buttons ^^ and press VOLUME UP button (on RCK, this is your recovery which should already be selected) until you see Android logo and process bar
10. Give the update process 5-10 minutes. It should not take longer than that. If it happens to run for more than 45 minutes to an hour, force shut down the tablet and see if it boots. If it does not, try rerunning steps 7-9.
Click to expand...
Click to collapse
Only issue is that it's flashed in recovery, which isn't functioning for me.. Or usable.
Can I flash cwm again, flash this firmware, then try twrp again?
DatacomGuy said:
Only issue is that it's flashed in recovery, which isn't functioning for me.. Or usable.
Can I flash cwm again, flash this firmware, then try twrp again?
Click to expand...
Click to collapse
You can also use fastboot to flash the ROM from your computer
Sent from my TF300T using xda app-developers app
cmendonc2 said:
You can also use fastboot to flash the ROM from your computer
Sent from my TF300T using xda app-developers app
Click to expand...
Click to collapse
Alright..
fastboot -i 0x0B05 flash recovery firmwarefile.zip
Click to expand...
Click to collapse
Is that the right syntax?
DatacomGuy said:
Alright..
Is that the right syntax?
Click to expand...
Click to collapse
Remove the "recovery", that means you are flashing to the recovery partition. So
Code:
fastboot -i 0x0B05 flash firmwarefile.zip
for the stock Rom.
cmendonc2 said:
Remove the "recovery", that means you are flashing to the recovery partition. So
Code:
fastboot -i 0x0B05 flash firmwarefile.zip
for the stock Rom.
Click to expand...
Click to collapse
I'm trying to flash "US_epad-user-10.6.1.27.5.zip" by doing:
fastboot -i 0x0b05 flash US_epad-user-10.6.1.27.5.zip"
Click to expand...
Click to collapse
and i get:
Unknown partition 'US_epad-user-10.6.1.27.5.zip'
error: cannot determine image filename for 'US_epad-user-10.6.1.27.5.zip'
Click to expand...
Click to collapse
What might i be doing wrong? I tried with the zip and without.
I checked the contents of the zip, and i have folder named "META-INF" with a bunch of content, and also a blob file, about 820mb.
Grr.
DatacomGuy said:
I'm trying to flash "US_epad-user-10.6.1.27.5.zip" by doing:
and i get:
What might i be doing wrong? I tried with the zip and without.
I checked the contents of the zip, and i have folder named "META-INF" with a bunch of content, and also a blob file, about 820mb.
Grr.
Click to expand...
Click to collapse
Extract the blob from the stock zip file. It should be a large file. Put that blob in your fastboot folder.
Code:
fastboot -i 0x0B05 flash system blob
cmendonc2 said:
Extract the blob from the stock zip file. It should be a large file. Put that blob in your fastboot folder.
Code:
fastboot -i 0x0B05 flash system blob
Click to expand...
Click to collapse
There we go.. Thank you very much for all your help.
Got it all flashed, all running well.
I tried to boot in to recovery, and got a "system error". I'm assuming i need to reflash the correct TWRP, and then try motochopper again? Or is there a better way to root..
EDIT: Currently running stock 4.2.1...
EDIT2: Is this the right one?
openrecovery-twrp-2.6.3.0-tf300t-JB.blob
DatacomGuy said:
There we go.. Thank you very much for all your help.
Got it all flashed, all running well.
I tried to boot in to recovery, and got a "system error". I'm assuming i need to reflash the correct TWRP, and then try motochopper again? Or is there a better way to root..
EDIT: Currently running stock 4.2.1...
Click to expand...
Click to collapse
Flashing the stock wipes the recovery, so you will need to flash the correct version of TWRP this time . I dont think you need TWRP for motochopper. Since you are unlocked, you can just flash the SU binaries directly from TWRP.
cmendonc2 said:
Flashing the stock wipes the recovery, so you will need to flash the correct version of TWRP this time . I dont think you need TWRP for motochopper. Since you are unlocked, you can just flash the SU binaries directly from TWRP.
Click to expand...
Click to collapse
Makes sense.. openrecovery-twrp-2.6.3.0-tf300t-JB.blob the right version?
You lost me on your last part.. where do i find the SU binaries?
DatacomGuy said:
Makes sense.. openrecovery-twrp-2.6.3.0-tf300t-JB.blob the right version?
You lost me on your last part.. where do i find the SU binaries?
Click to expand...
Click to collapse
Wait! Flashing that will brick it again!!! Dont flash that, use the -42 TWRP since you are on Android 4.2 now.
cmendonc2 said:
Wait! Flashing that will brick it again!!! Dont flash that, use the -42 TWRP since you are on Android 4.2 now.
Click to expand...
Click to collapse
LOL!
openrecovery-twrp-2.6.3.0-tf300t-4.2.blob
Got it.
What about root? After i flash, where do i find the SU binaries?
DatacomGuy said:
LOL!
openrecovery-twrp-2.6.3.0-tf300t-4.2.blob
Got it.
What about root? After i flash, where do i find the SU binaries?
Click to expand...
Click to collapse
TWRP should have the SU binaries built into it. If TWRP doesn't detect root when it is run from the bootloader, it asks you if you want to flash them. Are you trying to flash a KitKat ROM or a Jelly Bean ROM. KitKat needs TWRP -2.6.3.1
cmendonc2 said:
TWRP should have the SU binaries built into it. If TWRP doesn't detect root when it is run from the bootloader, it asks you if you want to flash them. Are you trying to flash a KitKat ROM or a Jelly Bean ROM. KitKat needs TWRP -2.6.3.1
Click to expand...
Click to collapse
i dont want to flash any rom right now, i just want to stick with stock 4.2.1...
Last time i flashed TWRP.. albeit incorrectly.. it didnt ask anything when i rebooted into recovery. I'm assuming thats when it asks....