Related
I've been seeing way too many requests for this with just about every mod possible. Considering the simplicity of this mod, the easiest way to please everyone, is for all of you to know how to accomplish this mod yourself.
BTW, this is for the status bar itself, not pulldown bar or notification background.
What you need:
- Paint.NET software (or any other image editing software that you are already comfortable with, this one seems to be the easiest for setting transparency though.)
- Your framework-res.apk AFTER you have all of your other mods applied to your phone. Otherwise you will have to apply this mod again every time you add or change mods (most likely).
- 7zip
So, you should have your framework-res.apk on your computer and 7zip installed to open the apk. Open up the framework, navigate to /res/drawable-hdpi folder. In that folder, find the file statusbar_background.png. You can either pull that file out to your computer to edit it or open it straight from 7zip (which is the best way to ensure there is no issues when pushing framework back to the phone) but you must have your editing software set as the default to open .png files.
Now once you have that file open in Paint.NET, you will see the image of the status bar as you currently have it. Up on the top toolbar, you should see the option "Layers". Click that then select "Layer properties" at the bottom of the drop-down. At the bottom of the window that pops up, you should see "Opacity" and the number set at 255 with the neighboring slider all the way to the right. I suggest using the slider because as you move it you will see the transparency applied to the bar image, allowing you to slide it around to the desired transparency.
Once you have finished setting your transparency, click the little disk image at the top left to save your changes, close the program out and you should then see a box pop up in 7zip (if you made changes without unpacking the file from 7zip first) asking if you would like to apply changes to file you edited. Say yes, then close 7zip, which may or may not state that changes have been made to the apk and if you'd like to update it, which you would say yes to if it does. If you unpacked the file from 7zip, simply drag and drop the file back into its correct spot, confirm you want to replace the file, then close it up. After all of this is done, just put framework-res.apk back into the framework folder on your phone whatever way you like, turn your phone on and you have a transparent status bar.
As a side note, you can play with Paint.net to see all of the modifications you can make to your status bar like changing colors, texture, and a few other things. One piece of advice is to have a backup framework-res.apk in case you make a mistake or something.
excuse my extreme noobness, but what is the best way to transfer the apk back and forth from the phone to computer? yes I am new to this and yes I am a retard and yes I probably shouldnt even try this..
JoeyBones1 said:
excuse my extreme noobness, but what is the best way to transfer the apk back and forth from the phone to computer? yes I am new to this and yes I am a retard and yes I probably shouldnt even try this..
Click to expand...
Click to collapse
Easiest way would be to get root explorer so you can navigate to the /system/framework folder and copy the apk from there to your sdcard, where you can just copy it to your computer. the other option would be plugging your phone into your computer, phone should be on, open up command prompt then navigate to your sdk/tools folder (get it if you dont already have it), then type "adb pull /system/framework/framework-res.apk c:\" without the quotes. the file will be in the root of your C directory. To get it back on your phone when finished, for root explorer just reverse the steps, but when moving the apk back to its proper folder, just hit the "Mount R/W" button at the top right of root explorer, copy the file back in and reboot. For alternate method, boot into recovery, mount /system partition, then in prompt after navigating to sdk tools folder type "adb push c:\insertdirectoryto\framework-res.apk /system/framework/" without quotes, then boot up and youre done.
tried this...boot looped...had to restore backup...thanks for the info though...might try again soon
BillytheKid82 said:
tried this...boot looped...had to restore backup...thanks for the info though...might try again soon
Click to expand...
Click to collapse
Did you try editing the file without extracting it or did you extract it and reinsert it?
Or you could edit the .png and use metamorph to push it into the framework-res.apk without moving or unzipping anything. And you could just keep the metamorph theme with that one .png on your sdcard to re-apply it whenever you flash a new rom, without altering any other theme elements you've already applied.
What do I edit to change the pull down notifications?
Sent from my Incredible using XDA App
thx a ton got it
transparent, transferring back to phone now..we will see
edit ..boot loops too..
i used root explorer ..extracted framework-res.apk to my sd card ,,then on my computer i opened paint.net and edited the statusbar_background.png file and then
zipped back up the framework-res and renamed to apk then copied back to my framework folder and it the forced closed and went into boot lopes...
i know im close to getting this right ..what step am i skrewing up?
i edited the file w/out extracting it...using root explorer i copied the framework res to my sdcard...plugged my phone in to comp, opened the framework res w/ 7zip, edited w/ gimp, saved all changes...unmounted phone, used root explorer and copied the new edited framework, then navigated to the original framework res and pasted the new one there to overwrite the original...then it force closed so i tried to paste it again, then the phone rebooted and boot looped? not sure if i did something wrong
Gahh Its Lee said:
What do I edit to change the pull down notifications?
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
That file is a .9.png file. editing these is ridiculously difficult and ill-advised.
chrisloveskaos said:
thx a ton got it
transparent, transferring back to phone now..we will see
edit ..boot loops too..
i used root explorer ..extracted framework-res.apk to my sd card ,,then on my computer i opened paint.net and edited the statusbar_background.png file and then
zipped back up the framework-res and renamed to apk then copied back to my framework folder and it the forced closed and went into boot lopes...
i know im close to getting this right ..what step am i skrewing up?
Click to expand...
Click to collapse
BillytheKid82 said:
i edited the file w/out extracting it...using root explorer i copied the framework res to my sdcard...plugged my phone in to comp, opened the framework res w/ 7zip, edited w/ gimp, saved all changes...unmounted phone, used root explorer and copied the new edited framework, then navigated to the original framework res and pasted the new one there to overwrite the original...then it force closed so i tried to paste it again, then the phone rebooted and boot looped? not sure if i did something wrong
Click to expand...
Click to collapse
I JUST remembered that I think you need to be running a deodexed rom to allow modifications. I've always used deodexed roms and forgot that it might be a requirement for things like this. Do either of you know if what youre running is deodexed or not?
mixedlemon said:
Or you could edit the .png and use metamorph to push it into the framework-res.apk without moving or unzipping anything. And you could just keep the metamorph theme with that one .png on your sdcard to re-apply it whenever you flash a new rom, without altering any other theme elements you've already applied.
Click to expand...
Click to collapse
metamorph is definitely more useful. I just have never created anything to run with it so I don't know the process of doing so.
im running skyraider vanilla, i tried to look on the thread to see if it is deodexed and i couldn't find if it is or not...may not be...thanks for your help
mb02 said:
I JUST remembered that I think you need to be running a deodexed rom to allow modifications. I've always used deodexed roms and forgot that it might be a requirement for things like this. Do either of you know if what youre running is deodexed or not?
Click to expand...
Click to collapse
running new skyraider 3.3 and im sure it is
Yea it seems they are both deodexed, and btw I didn't know skyraider 3.3 was so awesome I'm tempted to switch over to it. But yea, I'm not sure why your phones aren't allowing the modifications to the framework. I might as well load SR 3.3 and see for myself what's up. I'll get on that later tonight when I have time and let you guys know if i figure anything out.
Use this with metamorph. It will work on any rom (tested on skyraider 3.3) except those that still use the "drawable-hdpi-v4" folder in the framework-res.apk. If your rom uses that folder, simply rename the folder it puts on your sdcard in /sdcard/AndroidThemes/HalfTransparentBar/
If you'd rather have a different transparency just replace the .png in the folder with yours.
In fact, if you want to edit ANY graphic on your rom, just put the .png in the /sdcard/AndroidThemes/xxxxxx/framework-res/res/drawable-hdpi/ folder with the same file name as the one you want to replace. And of course, do a nandroid backup just in case.
EDIT: As Berzerker7 pointed out, this file probably wont make anything transparent unless you have a modified services.jar. oops.
mixedlemon said:
Use this with metamorph. It will work on any rom (tested on skyraider 3.3) except those that still use the "drawable-hdpi-v4" folder in the framework-res.apk. If your rom uses that folder, simply rename the folder it puts on your sdcard in /sdcard/AndroidThemes/HalfTransparentBar/
If you'd rather have a different transparency just replace the .png in the folder with yours.
In fact, if you want to edit ANY graphic on your rom, just put the .png in the /sdcard/AndroidThemes/xxxxxx/framework-res/res/drawable-hdpi/ folder with the same file name as the one you want to replace.
edit: and of course, do a nandroid backup just in case.
Click to expand...
Click to collapse
Well then that simplifies a lot of things lol. Thanks for putting that up for us, makes everything even easier.
Simply swapping a file won't work. It's the same reason simply swapping a transparent image for the notification pull-down doesn't work. Opacity is controlled on another level by services.jar. You need to modify the values there, as well as swapping out for a transparent image.
Btw, this didn't work for me on SkyRaider 3.3. (Metamorph or swapping the file).
It makes the background black but not transparent on virtuous 3.0.1
mixedlemon said:
Use this with metamorph. It will work on any rom (tested on skyraider 3.3) except those that still use the "drawable-hdpi-v4" folder in the framework-res.apk. If your rom uses that folder, simply rename the folder it puts on your sdcard in /sdcard/AndroidThemes/HalfTransparentBar/
If you'd rather have a different transparency just replace the .png in the folder with yours.
In fact, if you want to edit ANY graphic on your rom, just put the .png in the /sdcard/AndroidThemes/xxxxxx/framework-res/res/drawable-hdpi/ folder with the same file name as the one you want to replace.
edit: and of course, do a nandroid backup just in case.
Click to expand...
Click to collapse
Berzerker7 said:
Simply swapping a file won't work. It's the same reason simply swapping a transparent image for the notification pull-down doesn't work. Opacity is controlled on another level by services.jar. You need to modify the values there, as well as swapping out for a transparent image.
Btw, this didn't work for me on SkyRaider 3.3. (Metamorph or swapping the file).
Click to expand...
Click to collapse
Ah, I must have already installed a theme that modified it, then.
WOOOT!
SO can't wait to try this!
Wow... epic fail on my part... edited the image, repackaged, compared to original, file sizes/compression were similar enough, so I copied it onto my SD card and went in to Root Explorer... Mistake number 1)forgot to do a nandroid OR a titanium, Mistake number 2)Renamed the framework-res.apk to framework-res.bak BEFORE I copied the new file to the /system/framework. As soon as I did that, everything went haywire so I did a battery pull and went to do it the ADB way from recovery. Thought I did that right, so I rebooted into a bootloop... Finally gave up so I decided to do mistake number 3)full nandroid restore of a backup that was admittedly a few days old (See mistake 1 lol) after which I had rearranged a few things and added more apps etc... Now on to the important stuff...
MAKE SURE YOU DO STEP 1 BEFORE ATTEMPTING ANY OF THIS AND IF YOU RUN INTO PROBLEMS, DO STEP 2 SO YOU DON'T MAKE THE SAME MISTAKE I DID!
Step 1)For the love of all that's holy, do a Nandroid and Titanium backup first!
Step 2)In Clockwork Mod Recovery, do NOT do a full restore, instead go to advanced restore and simply restore the system (the part that you were messing around with to do this mod lol I realized this gem just as I clicked "Yes" in CWM, I still have the palm print on my forehead... haha
Hopefully you folks will have better luck than I did, but if not, hopefully I can save you some of the headache I went thru...
well i want to pull different apk from another rom and add to my rom. i would like the dialer and also the notification bar. if you can show and teach me that would be awesome thanks.
dialertabactivity.apk.
go into system/app on 1 rom. copy it using root explorer. paste it on your sd card. move it back to system/app on the rom you want to put it on. or just drag and drop on your computer. there is no guarantee that the apk will work on your current rom, so make backups.
the notification bar is the framework.apks. you would be better off using UOT kitchen because exchanging the framework can cause major problems if it was not made for your rom
I downloaded Sac's v2 ROM and I got used to the Recent apps where it usually is, my question is, is there anyway to flash a zip file or replace a file in order to achieve the stock button functions? I flashed his "hold home for recents" but its not the same as I'm used to.
You can take the android.policy.jar from system>framework in v1 and swap it and all buttons will go back to normal. (change permissions and such of course when replacing any system files)
I swapped the android.policy.jar files the other day, and as a result the phone just wouldn't boot. I'm guessing this is due to not setting permissions. How should permissions be set for the new file when it is swapped? And in addition, should permissions for other files placed in system be set the same exact way (for future reference)? I know how to change them, but do not know how they should be or why they should be set a certain way
dc.wash95 said:
I swapped the android.policy.jar files the other day, and as a result the phone just wouldn't boot. I'm guessing this is due to not setting permissions. How should permissions be set for the new file when it is swapped? And in addition, should permissions for other files placed in system be set the same exact way (for future reference)? I know how to change them, but do not know how they should be or why they should be set a certain way
Click to expand...
Click to collapse
The folder is set to rw-r-r- but there is a new flashable zip just posted in the sac23 thread
Not sure but I replaced the Android.policy.jar file from v1 to v2, worked like a charm. Took maybe 5 to 6 minuted to boot.
how do I replace my actual system/app folder for a backup safely?
I want to make sure things won't go like this again, also sorry for the wall of text beforehand
My phone is the LG Optimus G AT&T and I'm using the stock 4.1.2 rom
I tried to install a status bar for a stock based ROM and a lock icon removal on my stock rom but it didn't work as expected. It messed up some things and the systemui kept notifying me that it stopped working every few seconds. The zip files I flashed supposedly installed a few files inside said folder but I'm not sure which files nor if it edited other files so I want to replace it completely to not have any problem. thing is, I'm not sure of how to proceed here, do I just wipe it with an explorer and then paste the back up there, or will that break my phone again? do I push the backup with adb command prompt after deleting the folder? Is there another option?
I'm not sure if this info is helpful at all but I thought you guys might need to take it into account, just in case
I'm also not sure of which category is the right one, since it's my first post in this forum, though I've been lurking around for quite a while
I tweaked the system apps a bit before screwing up, and deleted the AT&T bloatware that nobody uses, also replaced the stock launcher with nova as a system app. having only 1 launcher caused a huge mess after trying to fix things by replacing the contents the folder with a copy of the backed apps.
First I replaced all 4 files with the name "systemui.apk/odex" and "LGsystemui.apk/odex". then I tried to replace the whole folder by moving things and I accidentally checked the "apply this action for all files" option (or something along those lines) while overwriting them, which probably caused nova launcher to stop working and rebooted my phone automatically. then I spent 2 hours trying to figure out what was wrong with the phone because I couldn't do anything, just open the settings through the status bar and it turned out I had to reinstall nova launcher outside system by sending the apk to myself through email to not get in that mess again, and now I'm here, a little desperate to know what can I do to not screw my phone up.
Thank you
I have been on XDA for 2 and a half years or so. I have gained a vast amount of knowledge and skills and its all in part due to XDA and the individuals who spend their time helping others who have made this all possible. The list of those to thank is too long. So before you see what I have to offer below, I want to thank everyone around the forums here for your help, or criticism . Without you guys, I never would've learned what I know today.
Most of my hacks for the HD 10 are spread out around several threads. That makes it hard to keep everyone updated when I find or create new goodies. It also makes it hard for users to find these goodies. This thread aims to solve that problem. From now on, I will include, if possible, my tricks and hacks in this thread. This aims to make searching for and installing these modifications quick and simple.
I have created a flash zip that installs all my goodies and hacks I have come up with so far. I just need so others to test it and make sure the installation process works and everything that is installed works. So please report back your findings so I can remove test from the thread.
***IIf this zip doesn't work or if it fails the worst that can happen is you will have to flash back to fresh stock and start all over and re-root. So make note of your Fire OS version before installing this zip. I am not responsible for anything that doesn't work. If you install this zip, you are doing so at your own risk.***
This zip does NOT contain the Google Play Store. By installing this zip, I assume you already have it installed. ViPER4Android requires an extra step or two and SELinux switch. See below.
Requirements:
- HD 10 with Fire OS 5.6.1.0 or 5.6.2.0
- Rooted with Xposed installed and Flash Fire functioning properly. See here to get it up and running.
What this zip includes:
- *ALL* of my framework-res mods including WiFi and location service optimizations.
- My rewritten Settings.apk which also includes all of my mods.
- Stock Basic Dreams and Photo Table screensaver. This was one of my goals when I first signed up on XDA. I knew what needed to be done to get this to work, I just didn't know how. Finally after nearly 4 to 6 months of reading and testing, I was finally able to edit the framework-res.apk to bring you this and other features. I also had to track down a working Basic Dreams and Photo Table APK. That was half the battle. Go to settings -> display settings -> Daydream. You can choose colors, clock or set some custom photos in Photo Table. Tap three dots in upper right to decide when Daydream turns on. (Note: Photo table requires your images be placed in internal storage in the 'Pictures' folder).
- Google Calendar (assuming you have deleted Amazon's calendar).
- DeskClock latest update and APK for Google Clock (assuming you deleted Amazon's clock).
- Google Contacts Sync Adapter (Once installed, you can delete Amazon's contact sync adapter as seen here. Also for non-root users). This allows for a small amount of visual customization when you pull down the notification bar. When you customize your profile in Google Contacts (also included in this zip) with a photo, the icon in the notification panel will change to whatever you upload as your contacts photo.
- Google Contacts (requires sync adapter listed above).
- Google TTS. You can delete PicoTTS in /system/app once Google TTS is installed. It's very outdated. You can also delete both of the Ivona folders in /system/priv-app. Best to delete app data for all three before deleting.
- Latin IME (AOSP replacement for stock keyboard. Will only work when you delete Amazon's keyboard (com.amazon.redstone), any other keyboard you have installed, then perform a factory reset without installing a new one.
- Stock Android Marshmallow boot animation. The zip replaces the bootanimation binary file in /system/bin/bootanimation with one from from @ggow custom ROM for the Fire 7. Amazon had modified the stock bootanimation binary to force the gold 'fire' boot animation. Doing this made it impossible to customize the boot animation. So I replaced it under the assumption the Fire 7 ROM binary is from an AOSP build and is pretty much universal among most custom ROMs. And it worked!
- Gallery3d. Replaces Amazon Photos (You have to delete Amazon Photos on your own) with library injection so it is fully featured. You can edit all images with a full stock of editing options. (does not set lock screen wallpaper. To change lock screen wallpaper, see here. Requires root). I was able to find the APK and libraries in this thread. The flash zip there doesn't work for our devices so I modified the APK to be more tablet friendly, allowing for scrolling and viewing in landscape mode then added the relevant files to this zip. In the APK, I removed the options for a settings menu, because it doesn't function, but the library does a great job at making up for the loss of it.
- CM Browser. I was able to port over this APK along with CM File Manager, CM Wallpapers, Lock Clock and Trebuchet from an official CM Lollipop ROM for the Amazon HD 8.9.
- CM File Manager (Can replace your favorite root explorer).
- CM Wallpapers. Cyanogenmod actually had a few good wallpapers. I wish they had made their own live ones though.
- CM Lock Clock with weather. (Yahoo weather doesn't function. Use Open Weather and set update interval to 30mins).
- Trebuchet Launcher with basic launcher settings. (You have to delete fire launcher on your own for this to take effect. /system/priv-app/com.amazon.firelauncher)
- Google Calculator (assuming you deleted Amazon's)
- Stock Android Live Wallpapers and Live Wallpaper Picker (doesn't include Androids add on wallpapers. For all of Android's stock live wallpaper add ons and stock wallpaper images, see this thread.
What this zip DOES NOT include or do:
- Google Play store is NOT installed. It is best advised to do this manually. Even flashing Gapps doesn't stop you from needing to tweak Secure Settings a little bit.
- Does not delete or remove any files or folders. It does however overwrite some. The framework-res, FireTabletSettings and bootanimation files will all be overwritten.
- Not yet a custom ROM, but it's close.
-Build.prop edits are not included. My WiFi optimizations and ViPER4Android need a few tweaks. Please see the 'build.prop' section below for details.
Installation:
NOTE: If you only wish to install certain packages or tweaks such as ViPER4Android, see instructions below installation guide.
1. Simply place the DragonMods.zip into internal storage.
2. Open Flash Fire and tap the '+' and select Wipe.
3. Make sure ONLY Dalvik Cache and Cache Partition are selected and tap the check mark in the upper right of the pop-up.
4. Tap the '+' again and tap 'Flash Zip or OTA'
5. From internal storage, select my zip package DragonMods.zip.
6. Tap FLASH and wait for everything to happen. This will take upwards of 10 minutes or more, depending on many variables so be very patient.
Install only select packages:
1. Place DragonMods.zip on your PC desktop. For this I use 7zip for Windows. Right click on the zip file and select 7-zip and open as archive.
2. Double click on system folder then double click on the folder you you want to delete. Example: If you do not want to install my framework-res APK, delete the framework folder. If you don't want CM Browser, delete that folder.
3. Once you are happy with your custom installation, replace the zip on your tablet's internal storage and follow installation instructions above.
ViPER4Android:
I have not included this in my zip for a few reasons. The foremost one being it requires you to delete a couple key files so I would rather you make the choice yourself rather than me doing it for you. I confirm it is full operational and functional and doesn't force close once installed properly. If you aren't convinced, just activate the notification.
1. Download the V4A2.3.4.0 Lollipop.zip provided at the Google Drive link below or go to this thread and download it. Make sure Selinux switch is installed, set to permissive with notification enabled. Also make sure BusyBox is installed.
2. On your tablet, go to /vendor or /system/vendor and tap etc.
3. Back up both of the audio files, audio_effects.conf and audio_policy.conf then delete them from the folder
4. Go to storage -> downloads and tap on the V4A2.3.4.0 Lollipop.zip, system, etc, and extract the two .conf files.
5. Go to the folder they were extracted into and copy both of them to /system/etc, overwriting the ones that are located there. Set the permissions (rw-r--r--) and reboot.
6. Go to downloads again, tap the V4A2.3.4.0 Lollipop.zip and system, app and extract the APK.
7. Create a folder in /system/app titled 'ViPER4Android'. Rename the APK 'ViPER4Android.apk' and paste it into the folder.
8. Set folder permission rwxr-xr-x, APK permission rw-r--r-- and reboot.
9. Open App and follow instructions. Tap upper right for menu and set UI to expert.
build.prop edits:
1. ViPER4Android needs a few tweaks to the build prop. If these variables and values already exist in your build.prop, please change them to the ones below. You can use Build Prop Editor or a root file explorer to make the edit:
Code:
Ipa.decode=false
tunnel.decode=false
lpa.use-stagefright=false
2. The WiFi needs a tiny bit more tweaking here too. Locate the following line in /system/build.prop and add the value to it as seen below (there is currently no value set and the best ones are 1, 6 or 11. You can use any number as long as it's 11 or less.
Code:
ro.wifi.channels=11
3. Locate the following lines in your build.prop. Back them up to a text file then delete both lines (numbers might be different):
Code:
wifi rssi->bar thresholds
persist.wifi.rssi.thresholds=-84,-75,-66,-55
Downloads:
DragonMods.zip (the main zip you need) - Current as of November 16, 2018
DragonMods5-6-2-0.zip (for users on FireOS 5.6.2.0)
V4A2.3.4.0_Lollipop.zip
That's all for now. This includes pretty much every hack, trick and tweak I have been able to achieve on these tablets so far. I hope you enjoy all of these and watch out for more of my hacks. Thank you everyone for making all of this possible! Don't forget to hit the thank button
Change Log
- November 22, 2018: Updated links to reflect the following: Fixed issue with Trebuchet launcher missing from zip by readding it to the folder. I don't know How I missed that. Replaced google Clock with correct APK. I meant to put in the DeskClock available from the Play Store. If anyone would like a zip containing the CM/AOSP DeskClock that changes colors as the day and night change, let me know and I will upload the APK. The reason for this mess: I used the wrong zip template I have for this package. The one with the mess was intended for my personal device. My apologies.
Problems:
-If you delete Amazon photos, when you tap settings, display settings, wallpaper, it will kick you back to main settings. Solution: download Amazon photos from the play store as a user app then do this:
Code:
adb shell
su
pm disable com.amazon.photos
pm clear com.amazon.photos
.
Function returns.
not sure how to install this
darkfortedx said:
not sure how to install this
Click to expand...
Click to collapse
Flash it in flash fire...says that in the OP
Be advised
I just downloaded it and realized I didn't put th right folder in for Trebuchet launcher so the folder is empty. So don't flash this zip until I can fix it when I get home later.
Update November 22, 2018 1:42PM:
- Fixed issue regarding launcher. See change log at the end of the OP.
after changing the permissions for /system/vendor/etc to rw-r-r and rebooting, get the boot screen then boot to quick flash on desktop then to black, can only get the power down window to show when holding power. I'm trying to change the permissions back in adb. . can you please send code to do this correctly? if this is the correct approach. i backed up the 2 files in es file explored back up folder.
I got it....
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
chmod 755 /system/vendor/etc
this worked... took me a while to figure it out. But it's all part of learning!
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
I missed that it was for the two files not the folder lol....
nikothebarber said:
I got it....
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
chmod 755 /system/vendor/etc
this worked... took me a while to figure it out. But it's all part of learning!
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
I missed that it was for the two files not the folder lol....
Click to expand...
Click to collapse
I have an update of this I'll upload later. I just want to make sure everything works as advertised. Apologies if not. I made a stupid mistake earlier that I fixed but might have missed a small thing or two.
Sent from my MotoG3 using XDA Labs
When I tried to flash it if flashfire, it will juz stuck in the first black screen for over 15 mins.
I can juz simply quit the app and everything remains the same and work fine though.
What would possibly be the problem?
@DragonFire1024
Tried to Install ViPER4Android with the steps and files you linked but was unsuccessful. When I bring up the Driver status and they all say no to Enabled. It already prompted me to install drivers which I did and re booted and still no go. I'm familiar with installing ViPER4Android and have it installed on my phone but not able to get it going in HD10. This tablet needs some way to higher the sound, sound on this tablet SUCKS. Any help would be greatly appreciated.
Touchpad64gb said:
Tried to Install ViPER4Android with the steps and files you linked but was unsuccessful. When I bring up the Driver status and they all say no to Enabled. It already prompted me to install drivers which I did and re booted and still no go. I'm familiar with installing ViPER4Android and have it installed on my phone but not able to get it going in HD10. This tablet needs some way to higher the sound, sound on this tablet SUCKS. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Sorry I've been very sick the last several days and have spent most of it in bed. Until I can look and see what's wrong, I can suggest you try 'volume boost by goodev' on the play store. You may need to make it a system app though.
Sent from my MotoG3 using XDA Labs
jeffreyyip314 said:
When I tried to flash it if flashfire, it will juz stuck in the first black screen for over 15 mins.
I can juz simply quit the app and everything remains the same and work fine though.
What would possibly be the problem?
@DragonFire1024
Click to expand...
Click to collapse
Flash fire will take approx. 10+ mins sometimes to go through the files then about the same time until the red flash fire bar appears at the top. With flash fire you just have to wait.
Sent from my MotoG3 using XDA Labs
DragonFire1024 said:
Sorry I've been very sick the last several days and have spent most of it in bed. Until I can look and see what's wrong, I can suggest you try 'volume boost by goodev' on the play store. You may need to make it a system app though.
Sent from my MotoG3 using XDA Labs
Click to expand...
Click to collapse
Thanks for your response, get some rest and I'll patiently wait to see what you come up with...Thanks again
Touchpad64gb said:
Thanks for your response, get some rest and I'll patiently wait to see what you come up with...Thanks again
Click to expand...
Click to collapse
Try deleting the viper folder if you installed it via a file explorer. Reboot then install viper as a regular app. Don't open it. In a root file explorer go to /data/app and copy viper folder to /system/app then reboot.
Sent from my MotoG3 using XDA Labs
DragonFire1024 said:
Try deleting the viper folder if you installed it via a file explorer. Reboot then install viper as a regular app. Don't open it. In a root file explorer go to /data/app and copy viper folder to /system/app then reboot.
Sent from my MotoG3 using XDA Labs
Click to expand...
Click to collapse
I did that the first time. I had to enable Selinux Switch and enable Permissive which it seems like you have to enable each time you want to use Viper. The Driver Status now says NEON enabled, Enabled=Yes, Status=Normal, Audio Format= Supported but it still sounds like it makes no difference in boost in volume. The App you suggested Volume Booster works great. On my phone I can notice the difference on Volume quality and boost but not on the HD10 using Viper. What settings are you using? Maybe it's the settings.
Touchpad64gb said:
I did that the first time. I had to enable Selinux Switch and enable Permissive which it seems like you have to enable each time you want to use Viper. The Driver Status now says NEON enabled, Enabled=Yes, Status=Normal, Audio Format= Supported but it still sounds like it makes no difference in boost in volume. The App you suggested Volume Booster works great. On my phone I can notice the difference on Volume quality and boost but not on the HD10 using Viper. What settings are you using? Maybe it's the settings.
Click to expand...
Click to collapse
Did you rename the audio.conf files in vendor?
Sent from my MotoG3 using XDA Labs
DragonFire1024 said:
Did you rename the audio.conf files in vendor?
Sent from my MotoG3 using XDA Labs
Click to expand...
Click to collapse
No, I didn't see any instructions to do so. Was I supposed to?
Touchpad64gb said:
No, I didn't see any instructions to do so. Was I supposed to?
Click to expand...
Click to collapse
Yes. Rename them. But you should do it before installing viper.
Sent from my MotoG3 using XDA Labs
DragonFire1024 said:
Yes. Rename them. But you should do it before installing viper.
Sent from my MotoG3 using XDA Labs
Click to expand...
Click to collapse
The original files were named the same as the files copied over that's why you have to allow it to overwrite. Original files and copied files were both named audio_effects.conf & audio_policy.conf. I also edited the build prop entries you mentioned. Can you share your build prop file so I can compare your entries to mine? What were the names you change audio_effects.conf & audio_policy.conf to?
Touchpad64gb said:
The original files were named the same as the files copied over that's why you have to allow it to overwrite. Original files and copied files were both named audio_effects.conf & audio_policy.conf. I also edited the build prop entries you mentioned. Can you share your build prop file so I can compare your entries to mine? What were the names you change audio_effects.conf & audio_policy.conf to?
Click to expand...
Click to collapse
Just put a _ at the end of .conf. I didn't add the removal of the vendor files in the zip and I think I stated that in the OP.
Sent from my MotoG3 using XDA Labs