Been playing around with my tab again a bit and trying some different roms and such, and just wondering what some of you use for roms and kernels? Along with any specific cpu or gpu settings would be awesome!
Thanks much!
Q&A section rules
Anyways, I prefer chromi xenogenesis + hundsbuah kernel
Sent from my GT-I9300 using xda premium
+1 wrong form, I like
rom:Cromi-x
Kernel:Max's kernel
Governor: Touchdemand
Tweaks: fsync disabled
Cromix+_that kernel.
As simple as _that....
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
codeinish said:
Cromix+_that kernel.
As simple as _that....
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Try Max's kernel its better.
Sorry for posting here ha... Didn't really think much and am always looking in this forum!
Thanks a lot for the responses though :A
Seems like everyone has had good experiences with that ROM...
Sent from my HTCONE using Tapatalk 2
burnface said:
Sorry for posting here ha... Didn't really think much and am always looking in this forum!
Thanks a lot for the responses though :A
Seems like everyone has had good experiences with that ROM...
Sent from my HTCONE using Tapatalk 2
Click to expand...
Click to collapse
I've tried CM10.1 and CROMi-X, but went back to CM10.1. CROMi felt a little more laggy, and it didn't seem to work as well with the keyboard dock (minor things like the settings key didn't work, it wouldn't mount a USB drive, etc). I really do NOT being forced into the phone UI, so I'm looking forward to when Paranoid Android is ready for prime time.
HeathicusF said:
I've tried CM10.1 and CROMi-X, but went back to CM10.1. CROMi felt a little more laggy, and it didn't seem to work as well with the keyboard dock (minor things like the settings key didn't work, it wouldn't mount a USB drive, etc). I really do NOT being forced into the phone UI, so I'm looking forward to when Paranoid Android is ready for prime time.
Click to expand...
Click to collapse
CleanRom is fully stock everything works fine due to this fact, either you only tried it during its early stages of 4.2.1 update or used a not so good kernel. As for the lag you did you have the latest twrp installed and updated boot loader. A clean install of cromi-x will never produce lag.
I would suggest Max's kernel always as it has dynamic fsync(disabled when device is on and enabled when device is off) and security features to avoid data corruption. Max's kernel is the most smoothest kernel there is and battery life is amazing!! :good::good:
So another question... In trying to update my bootloader , it still shows the old one in my settings about phone.... Even after is says complete.. How can I be sure it's the correct new one?
Thanks a lot everyone for the help!
Sent from my HTCONE using Tapatalk 2
burnface said:
So another question... In trying to update my bootloader , it still shows the old one in my settings about phone.... Even after is says complete.. How can I be sure it's the correct new one?
Thanks a lot everyone for the help!
Sent from my HTCONE using Tapatalk 2
Click to expand...
Click to collapse
Got it nevermind!
Sent from my HTCONE using Tapatalk 2
Thread moved and closed.
There is no best rom/kernel combo, it is really up to you what you will prefer and what not, probably if you ask five different people you may get five different answers. Try many and then decide what suits you better.
Related
NEW NIGHTLY BUILD AVAILABLE:
http://download.cyanogenmod.com/?device=tf101
LATEST RELEASE CANDIDATE:
http://download.cyanogenmod.com/get/jenkins/3513/cm-9.0.0-RC1-tf101.zip
CHANGELOG: http://changelog.bbqdroid.org/#tf101/cm9/next
I AM NOT THE DEVELOPER
Congrats youv just voluntered for it lol
Sent from my R800i using xda premium
Oh someone had started an official thread on rootzwiki but not here, i think the cm 9 boot animation is awesome.
Sent from my R800i using xda premium
A link to the changelog?
thank you
steftolo said:
A link to the changelog?
thank you
Click to expand...
Click to collapse
done
i just tried installed it as i read that CWM was offically supported for TF101, so i went and tried to flash that, but still looks like my copy i had before.
anyway i noticed CM9 also! so i wanted that too, but it downloaded to the sd which is internal memory and everytime i want to flash i have to go and titanium backup and then move the files to micro sd from sd. then make sure my roms are on the micro sd too.
does everyone else have to do this too? now downloading cm9 from the link as my download and move on the memorys, has given me a bad flash and i cannot open the zip.
bArDBQ said:
done
Click to expand...
Click to collapse
this is simply great... but I would like to know who is developping for our little beasts and how/if we could help...
whoever you are, thanks a lot
rhaaa said:
this is simply great... but I would like to know who is developping for our little beasts and how/if we could help...
whoever you are, thanks a lot
Click to expand...
Click to collapse
Shane Francis (bumble bee) is developping officially cm9 for TF101 and 201, and as for all concern cm, follow him on google +.
Last news, bumble bee was working on 3.1 kernel....which should be soon added for our TF.....
And i guess you had this news today :
http://www.cyanogenmod.com/blog/new-build-servers-online
Which means we'll have nighlies flowing much more regularly very soon
Just installed. So far so good.
You'll need GAPPS for CM9
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
Is the kernel based on Asus kernel sources? Any SOD or Random reboots?
did koush fix the cwm in rom manager?
ferparedes said:
Is the kernel based on Asus kernel sources? Any SOD or Random reboots?
Click to expand...
Click to collapse
Couldn't you just flash another one of the kernels if that's the case? Or are there special rules I'm not aware of for this device? I just got this tab yesterday, but I know the kernels for my phone have special rules or w/e.
Sent from my Transformer TF101 using XDA Premium App
I2IEAILiiTY said:
Couldn't you just flash another one of the kernels if that's the case? Or are there special rules I'm not aware of for this device? I just got this tab yesterday, but I know the kernels for my phone have special rules or w/e.
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Yes and no.. some Kernels are far worst than others.. this isnt the Mytouch 4G forum. Its special rules . CWM just recently updated to reboot to recovery for awhile it wouldn't reboot and doing by pressing down and power would just go into the regular recovery not allowing you to flash and they made ROGUE recovery which than allowed you to flash CWM.. all kinds of crazy lol
shadowjin said:
Yes and no.. some Kernels or far worst than others.. this isnt the Mytouch 4G forum. Its special rules . CWM just recently updated to reboot to recovery for awhile it wouldn't reboot and doing by pressing down and power would just go into the regular recovery not allowing you to flash and they made ROGUE recovery which than allowed you to flash CWM.. all kinds of crazy lol
Click to expand...
Click to collapse
...did you follow me over here?! Lol
Sent from my Transformer TF101 using XDA Premium App
[/COLOR]
I2IEAILiiTY said:
...did you follow me over here?! Lol
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
i dont know how i can follow you.. if you look at my post there mytouch 4G, Asus TF101 and Transformer Prime. I wouldn't answer your question if i didn't know.
shadowjin said:
yes he did.. i just updated it..
---------- Post added at 03:37 PM ---------- Previous post was at 03:35 PM ----------
i dont know how i can follow you.. if you look at my post there mytouch 4G, Asus TF101 and Transformer Prime. I wouldn't answer your question if i didn't know.
Click to expand...
Click to collapse
Haha well then...creeper...lol jk
Guess ill have to see you around even more now
Sent from my Transformer TF101 using XDA Premium App
I2IEAILiiTY said:
Couldn't you just flash another one of the kernels if that's the case? Or are there special rules I'm not aware of for this device? I just got this tab yesterday, but I know the kernels for my phone have special rules or w/e.
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
You certainly can try different kernel. Guevor's have done test kernel that got rid of the SOD for me.
I'm on Megatron which is base on CM9. The only special rules would be to read the OP of any thread. Usually the Dev will say if so and so kernel is compatible with certain ROM, ect.
Can anyone see if the Hulu+ app will install from the market?
baseballfanz said:
You certainly can try different kernel. Guevor's have done test kernel that got rid of the SOD for me.
I'm on Megatron which is base on CM9. The only special rules would be to read the OP of any thread. Usually the Dev will say if so and so kernel is compatible with certain ROM, ect.
Click to expand...
Click to collapse
I haven't experienced SOD yet and I'm using androidrevo 3.2.
I did get a freeze earlier today while accessing my wifi settings though.
I may try out this Guevor kernel though and see what its about. Haha
What other kernels are on this tab? That's the only one I've seen so far.
Sent from my Transformer TF101 using XDA Premium App
If it doesn't work out, can I fall back to ICS?
TIA
newshook said:
If it doesn't work out, can I fall back to ICS?
TIA
Click to expand...
Click to collapse
I tried reloading the .30 firmware by putting the zip in root of internal storage. It updated as a downgrade but I was still on job when it was done, so not sure if you can with a locked boot loader.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Do you think it is worth jumping in now? I don't have specific expectation on JB except it is the latest from google.
newshook said:
Do you think it is worth jumping in now? I don't have specific expectation on JB except it is the latest from google.
Click to expand...
Click to collapse
Just depends on your taste. You might review other upgrade post stories first to be sure. Some are flawless, some not.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
THelook and feel of JB is for the most part similiar to ICS.
Their are some differences you will notice:
Animations: Some new and smooth animations that are nice. Animationa arre a minor thing but add a nice touch.
Project butter: My tablet does seem to run smoother and I have yet to have a wait/close prompt pop up. Of course I may get some, but so far it seem to have improved in that dept.
Google Now & search: This is what I wanted most. I really like the voice search, it really fast with returning answers. I wish I did a few more thens like open apps and tell me my next apointment when asked, bt I'm sure that will come with future updates. Google Now is prety neat and I'm interesting in seeing how it starts to work once I have had it a while and it can develop some patterns and give me info based off what it believes is relavent for me.
This is just an initial impression is I just updated last night and haven't really got much day to day expierance with JB, but so far so good. So far I don't really see the down side. You gain a few things and don't really lose much. Unless you have a particular app that dosen't play well wih JB yet.
Can't wait to get jellybean but I'll wait patiently for it
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
You could learn in these forums to root, unlock and flash ROMs; giving you an open ticket to run whatever you want on ur tablet.
Sent from my SGH-I777 using xda app-developers app
I want to downgrade ,too. But it is unable to downgrade with known methods.
PS. My device is unlocked.
If your bootloader is unlocked, you can flash whatever ROM you want from the custom recovery you installed.
Sent from my Transformer Pad TF300T using xda app-developers app
rich.x87 said:
If your bootloader is unlocked, you can flash whatever ROM you want from the custom recovery you installed.
Sent from my Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
You can flash anything, doesn't mean you'll be successful. The current recoveries can't support this due to different boot and kernel mods. The guys are currently trying get a fix for those on OTA JB and all. I would say sit tight and wait for conformation that Twrp or cmw can backup and restore boot from diff firmwares. I tried this and got stuck at Asus logo and couldn't boot into os. But was able to get official JB back up. So now I'm stuck on JB for now.
Sent from my Nexus S 4G using Tapatalk 2
Mysticial Kernel v0.1 for Official TF700 JB
STOP
1. I am not responsible for any issues this may cause your device and won't be held for any soft-bricks, hard-bricks, boot loops, exploding pets or Resonance Cascades.
2. You MUST be using the JB bootloader for this kernel to work.
The Goods
Unsecure boot.img
"Unlocked" ro.sf.lcd_density
"Unlocked" ro.carrier
For now the kernel itself is still stock however I've unlocked the ability to change ro.sf.lcd_density and ro.carrier in build.prop and unsecured the boot.img for true root access.
Not much on the first release but there's more to come soon.
Download
http://dl.dropbox.com/u/83380328/Mystical Kernel v0.1.zip
MD5: A9A436C1AEE9A27F8FBC4DC26892AF4A
Installation
1. Power off your tablet
2. Download the Kernel
3. Copy the Kernel to your MicroSD card or Internal Storage
4. Insert the MicroSD card in your tablet
5. Boot your tablet into Recovery by pressing and holding Volume Down AND Power for 5 seconds
6. A message will inform you that you have 5 seconds to enter Recovery; press Volume Up before the 5 seconds expire
7. Perform a backup from Custom Recovery
9. From your recovery menu press Install and select the Kernel
10. Wait until the install process ends and then restart your device
This is awesome, installed it and now its nice and awesome DPI again on JB thanks for this
Splendid! I look forward to seeing what this evolves into! I personally believe that a good, clean, professionally done kernel by an individual that actually cares instead of ASUS devs, is what we need to make this device perfect. :highfive:
TheAnarchist1 said:
Splendid! I look forward to seeing what this evolves into! I personally believe that a good, clean, professionally done kernel by an individual that actually cares instead of ASUS devs, is what we need to make this device perfect. :highfive:
Click to expand...
Click to collapse
+ a lot
Its hard to beat the custom kernels that the devs come out with. Really cant wait to see this evolve. Thanks for picking our device
Stock kernel:
http://forum.xda-developers.com/showthread.php?t=1919961
Play store w/ DPI mod
http://forum.xda-developers.com/showthread.php?t=1839871
Is writing an overclocked kernel hard to do? I mean, the tegra t33 is already powerful enough but some extra gigahertz would be nice.
Maybe it's just that I'm insane but I think overclocking would be a cool thing to implement, that is if it isn't hard to do.
Super excited about this! Really hoping to see some over-clocking action heading in our direction at some point... Thanks!
Sent from my Transformer Pad TF700T using Tapatalk 2
newellj79 said:
Super excited about this! Really hoping to see some over-clocking action heading in our direction at some point... Thanks!
Sent from my Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
This works perfectly with CleanRom1.1.
In case anyone was wondering, the default kernel is stuck at 240 DPI even though it shows to be set o 160. I actually prefer 240 over 160 due to these 51 year old eyes, but sometimes I do like to change the DPI for a 'new view'.
Thanks Dev!
I never tried the build.prop for dpi before but just installed this and wow everything is so nice and small lol this rocks!!!!!!!!!!!!!!!!
Working fine for me with 200dpi, thanks !
lafester said:
can you post up the stock kernel as well?
always nice to have a way back.
looking forward to some oc on this beast.
Click to expand...
Click to collapse
That is why there is step 7. It will be in your backup.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
I was so excited about this that I tried to flash it with black bean. Of course it was a no go.
Sent from my Transformer Pad TF700T using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1919961
stock kernel is posted here.
eyosen said:
That is why there is step 7. It will be in your backup.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Just flashed to check it out. 160 is pretty damn small lol.
Quickly changed to 200 and its better but I'll probably end up back at 230 soon enough.
thanks again and look forward to more tweeking.
So what are you guys using tochange your dpi? What all changes when lets say you goto 200 or so, just the status bar or...?
Also, does this effect the play store at all? I think on my nexus at one point it did.
I used the build.prop editor in ROM Toolbox. Everything changes with 200 DPI, I find that about the best without going too small.
You can use a patched Play Store from http://forum.xda-developers.com/showthread.php?t=1838077 this removes the DPI check and device restrictions !
I just use build.prop editor. I run my infinity at 200 DPI and have never had Play Store problems. Same goes for my Nexus 7 which I keep at 190 dpi
Sent from my ASUS Transformer Pad TF700T using xda premium
Totally rocks, line having my great resolution back!
all you kids with your new-fangled "build.prop editors"!
in my day all you needed was vi.
jpearn said:
You can use a patched Play Store from http://forum.xda-developers.com/showthread.php?t=1838077 this removes the DPI check and device restrictions !
Click to expand...
Click to collapse
I tried this out and it runs fine but won't download ANY apps now.
Which version are you using?
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Galaxy S2 i727 (skyrocket)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
This is a safe flasher for 4.4 ROMs I would assume. I guess I'll be the Guinea pig. Will my old cwm nandroids work?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Smittiegee19 said:
This is a safe flasher for 4.4 ROMs I would assume. I guess I'll be the Guinea pig. Will my old cwm nandroids work?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm ready to test now. Will find out!
SGH-I727 Peace
It is compiled from official cm-10.2 sources
So, I assume it is safe, just as stock CWM can be
It flashed fine and seems to accept regular backups. The interface is sweet looking. I like it. Way better than the previous bare bones one, as far as looks go. As soon as I find a new ROM to flash I'll give it whirl. Good job dude.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Thank you very much! Im having no issuses. Although i dont see a "fix permissions". Is that no longer needed?
Works good! Backed up current 4.3.1 rom then restored old backup of a 4.3.1 rom. Have not tried to flash or restore 4.4 yet. Thanks!!
Sent from my SGH-I727 using Tapatalk
Beautiful!
SGH-I727 Peace
Smittiegee19 said:
This is a safe flasher for 4.4 ROMs I would assume. I guess I'll be the Guinea pig. Will my old cwm nandroids work?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Just flashed Slimkat4.4 everything works as it should so far.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
EQ2192012 said:
Just flashed Slimkat4.4 everything works as it should so far.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
looks amazing, i got confused with the buttons at the bottom at first but now i get it. Seems good :3
Finally!
:happydance:
Eighteen thumbs up for you, my friend!
Sent from my SGH-I727 using xda app-developers app
I'm a bit leery of the fact that it is based on 10.2 sources. I'm on 11.0, and while CWM 6.0.3.7 is very painful to use from a UI perspective, it has always worked, so I don't want to mess with my partitions unless I know it supports 4.4.
slahti said:
Eighteen thumbs up for you, my friend!
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Cwm 6043 is touch based btw
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
rpr69 said:
I'm a bit leery of the fact that it is based on 10.2 sources. I'm on 11.0, and while CWM 6.0.3.7 is very painful to use from a UI perspective, it has always worked, so I don't want to mess with my partitions unless I know it supports 4.4.
Click to expand...
Click to collapse
cm-10.2 recoveries are way more stable than yet experimental cm11 branch
You can wait next year when cm-11 recoveries are fully stable, but then you'll even have to wait for cm12 :cyclops:
Chopsticks gave a specific recovery for 4.3 and 4.4, risk ain't worth it in my book. Anyway nice job seems cool.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
TheCybertronian said:
Chopsticks gave a specific recovery for 4.3 and 4.4, risk ain't worth it in my book. Anyway nice job seems cool.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
This is my point. Will PhilZ recovery properly write partitions? Specifically /data, as I believe that is the problematic one due to SELinux.
rpr69 said:
This is my point. Will PhilZ recovery properly write partitions? Specifically /data, as I believe that is the problematic one due to SELinux.
Click to expand...
Click to collapse
1- Read the few pages of the thread
2- This is based on celox, and all celox based devices I support do work perfectly
3- Either test and report or watch the thread and wait without cluttering it with useless comments
4- Ask in FAQ if you are impatient to wait for others to test it for you
Sorry, monitoring +70 threads for support/feedback. If I have to refresh them all just for useless comments, I am wasting my time
nap286 said:
Thank you very much! Im having no issuses. Although i dont see a "fix permissions". Is that no longer needed?
Click to expand...
Click to collapse
Nope, does nothing. That's a relic from the gingerbread era.
TheCybertronian said:
Chopsticks gave a specific recovery for 4.3 and 4.4, risk ain't worth it in my book. Anyway nice job seems cool.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
I'll make our position clear on that statement. We recommend a specific recovery so that we can rule out certain items when debugging issues, that is all. We are not making a recommendation based on "what is the best recovery available", it is a consistency decision that helps us when issues arise related to the file system, flashing, etc.
@Phil3759 - thanks for building this for the skyrocket.
I installed the new cm11 nightly with 0 problems. Went just like it should. Just FYI
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have been considering making my own rom for the tf700 and thought that it would be nice if I could port the tf701 stock rom or the new CROMI- X rom over to the tf700. Is this even possible? I thought that if I swapped out the kernel and the drivers that it should work is this true?
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
kansasboy001 said:
I thought that if I swapped out the kernel and the drivers that it should work is this true?
Click to expand...
Click to collapse
No.
sbdags has tried it, it's not so easy.
_that said:
No.
sbdags has tried it, it's not so easy.
Click to expand...
Click to collapse
Has sbdags gotten anywhere with it, as far as a rom?
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
You should move the thread to the General section. It's not a development thread.
Cheers mate.
Sent from my jfltexx using Tapatalk
kansasboy001 said:
I have been considering making my own rom for the tf700 and thought that it would be nice if I could port the tf701 stock rom or the new CROMI- X rom over to the tf700. Is this even possible? I thought that if I swapped out the kernel and the drivers that it should work is this true?
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
It indeed belongs in the general section.
Rom can't that easy be ported because SOC is totally different and it would bring simply too much work and even maybe it is impossible.
You may be able to port parts of the framework but it would be a massive amount of work. One issue is the files are much larger in the TF701T ROM due to the higher resolution meaning that even after you massively deboat the stock firmware it is hard to fit into the system partition. It is possible to maybe get it running on rom2sd but considering thee minimal changes in 4.3 over 4.2 I don't consider the effort and amount of debugging worth it. Don't forget we have a boot loader and kernel for 4.2 so there is some work to do first to get it to even boot.
Feel free to have a go though