Miui HTCSPAIN DEV v5.1 - LITE SecBOOT
SECONDARY BOOT ONLY !!!!
LG Optimus 3D P920 ONLY !!!!
Miui htcspain dev
** Acura2201
** Franlov
Threat about the Full Version (with primary boot)
Port for LG Optimus 3D is made by OptimusRS - MIUI V5 3.6.7
Kernel iBluemind modded for secondary boot by me
http://d-h.st/O5H
Rom is cleaned from more than 35 programs (Ac!d Audio and Radio Fm are not removed). After fast reboot - more than free 180MB RAM
So.... you can use the programs you like
I. Before instalation:
1. Prepare your card for CM10 ROM according to this threat
2. Take a backup of your current kernel or download appropriate one <-- IMPORTANT TO GO BACK TO MAIN ROM
3. If you already have secondary ROM - make a backup
II. Instalation:
Do NOT make any wipes !!!! DO NOT MAKE WIPES !!!! DO NOT MAKE WIPES !!!!
1. Go to Recovery
2. Install the ZIP file
3. Reboot
You go directly to the ROM2
III. Switching the ROMs:
If you want to go back to the main ROM1 - flash the kernel for ROM 1 that you prepared before installation
If you want to go again to ROM2 flash this kernel:http://d-h.st/O5H
The ROM is FAST, CLEAN, plenty of RAM, and ready for your favorite programsHave not seen FPS bug so far.
Antutu bench - more than 8000 point on 1200MHz
I am not a developer. So all credits goes to OptimusRS, Acura2201, Franlov and the people in their threads.
If you want FULL version - do not download this rom! Take the one form OptimusRS or Acura2201
DOWNLOAD Miui HTCSPAIN DEV v5.1 - LITE SecBOOT
http://d-h.st/j7I
or
https://www.wuala.com/p.vlad/Kernels/SecBoot%20lite%20MIUI_acura.zip
screenshots? ahaha
Did you tested this ROM ? What is the difference between this ROM and MIUI by OptimusRS?
Chris189 said:
Did you tested this ROM ? What is the difference between this ROM and MIUI by OptimusRS?
Click to expand...
Click to collapse
I clean it and use it.
They look the same but this one is tweaked by Acura2201
---------
* RAM tweaks
* performance tweaks
* FM radio
* Build-in OC
* Roaming fixes
* etc
------------
and
have kernel based on 3.0.62 (the only one that I can modify for Secondary Boot to work with newer CM10) by iBluemind
-----------------
Features
* Based on Linux kernel for Android version 3.0.62
* Overclockable CPU(up to 1.4GHz), overclocked GPU(384MHz), added CPU clock 196.608MHz
* Undervolted to value of Froyo firmware for Optimus 3D, for stability.
* CustomVoltage control, FSync control, LiveOC control, GPU OC control, FastCharging
* Enabled ZRAM(with Snappy), KSM, CleanCache
* Added new CPU governors, and I/O schedulers
* Compiled with the lastest version compiler(Linaro GCC 4.7.3) and optimized compile flags
* Applied many kernel tweaks like ARM optimization, common Linux tweaks
* Added the setting max frequency at turned screen off
* Updated 'Interactive' CPU governor to the lastest version
* Applied init.d scripts on boot
* Removed compile warning on LGE driver for more stability
Changelog
[11/02]
* Decreased voltage of WLAN
* Removed compile warning of LGE driver (More stability )
* Added FastCharging feature (Force AC charging)
* Tweaked LGE touchscreen (Thanks to faux123)
* More stable compile optimized flags
* Updated CPU governor 'Hotplug'
* P920/CM10 : Revert to rmcc's CM10 ramdisk
--------------
p-vlad said:
I clean it and use it.
They look the same but this one is tweaked by Acura2201
---------
* RAM tweaks
* performance tweaks
* FM radio
* Build-in OC
* Roaming fixes
* etc
------------
and
have kernel based on 3.0.62 (the only one that I can modify for Secondary Boot to work with newer CM10) by iBluemind
-----------------
Features
* Based on Linux kernel for Android version 3.0.62
* Overclockable CPU(up to 1.4GHz), overclocked GPU(384MHz), added CPU clock 196.608MHz
* Undervolted to value of Froyo firmware for Optimus 3D, for stability.
* CustomVoltage control, FSync control, LiveOC control, GPU OC control, FastCharging
* Enabled ZRAM(with Snappy), KSM, CleanCache
* Added new CPU governors, and I/O schedulers
* Compiled with the lastest version compiler(Linaro GCC 4.7.3) and optimized compile flags
* Applied many kernel tweaks like ARM optimization, common Linux tweaks
* Added the setting max frequency at turned screen off
* Updated 'Interactive' CPU governor to the lastest version
* Applied init.d scripts on boot
* Removed compile warning on LGE driver for more stability
Changelog
[11/02]
* Decreased voltage of WLAN
* Removed compile warning of LGE driver (More stability )
* Added FastCharging feature (Force AC charging)
* Tweaked LGE touchscreen (Thanks to faux123)
* More stable compile optimized flags
* Updated CPU governor 'Hotplug'
* P920/CM10 : Revert to rmcc's CM10 ramdisk
--------------
Click to expand...
Click to collapse
con`t flash it,report error!!
wyl326 said:
con`t flash it,report error!!
Click to expand...
Click to collapse
Did you prepare the SD card dual boot?
What kind of error it say?
What is your first booting Rom?
Which is your bootloader?
p-vlad said:
Did you prepare the SD card dual boot?
What kind of error it say?
What is your first booting Rom?
Which is your bootloader?
Click to expand...
Click to collapse
must dual boot?
wyl326 said:
must dual boot?
Click to expand...
Click to collapse
read the first 3 lines of the first post
I have error as well error 6 something......and yeah on dual boot. I was looking forward on this one.....
Sent from my LG-P920 using xda app-developers app
SickRaider said:
I have error as well error 6 something......and yeah on dual boot. I was looking forward on this one.....
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
error 6.... hmmm... i suppose you use CWM. Try with TWRP.
p-vlad said:
error 6.... hmmm... i suppose you use CWM. Try with TWRP.
Click to expand...
Click to collapse
I had twrp and thought it was because of it so changed to cwm, both of them give me same error.
Sent from my LG-P920 using xda app-developers app
SickRaider said:
I had twrp and thought it was because of it so changed to cwm, both of them give me same error.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
did you had another secondary rom before you flash this one? If yes - use the recovery tools form the dual boot script 2 from this post to clean the second rom system, data and cache before you flash it.
Solved it, there must be something wrong with your updater-script, because i took the one from the original accura miui, changed it to dual boot and copied to yours, and works, by the way, good job mate.
Sent from my LG-P920 using xda app-developers app
Related
★ ★Hello guys, I am back with new Kernels! ★ ★
★ FAster/Sleeker and better than my previous builds- ★
★ First of all-
★ MY Sources are based on XDA_BAMs sources!
★ Thanks to him for letting me use it!
READ THIS FIRST-
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications,
and if you point the finger at me for messing up your device, I will laugh at you.
FEATURES-
1] Disabled some unnecessary stuff
2] I/O Patches and Tweaks to improve I/O
3] Stochastic Fair Blue Net Scheduler
4] Used many Makefile Optimizations with Linaro 4.6.3
5] Cleancache driver
6] EXT23 mounted as EXT4 (faster and better!)
7] Overclock upto 1.2Ghz w/ Undervolting of stock freq
8] JHash Bumped to V3
9] XZ Compression (Speeds up boot time)
10] GOVERNERS: Conservative/Ondemand/Smartass2/Performance (Less Governers, lesser bloat)
11] IO SCHEDULERS: Sio/Noop
12] Boot freq resticted to 1Ghz (dalingarin)
13] VM_MAX_READAHEAD set to 1024
14] Many small patches/improvements!
15] CFS and VM Ratios Tweaked for best battery + Performance
LOTS! Coming up soon! Stay tuned
Have a look at my github for detailed info about changes!
Reserved
FAQ:
1. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg or logcat.
2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
A: Fix it yourself, it's an app waking your device up not the kernel's problem. Also make sure you let your device settle for at least 2 charging cycles. Typically apps like Facebook and Google Maps can cause problems since they wake it up pretty much all the time
3. Signal is dropping since I flashed the kernel, amg u sucks!
A: The kernel has nothing to do with gsm/cmda signal.
4. Do I need to wipe anything when flashing this kernel?
A: Just wipe cache and Dalvik cache after flashing.
5. Does this kernel has X or Y mod?
A: Learn to read, everything you need to know is in the features list, changelog or public repo.
6. Don't use 3rd party init.d scripts!!!
7. After the device boots, the phone runs at 1.35Ghz. So make sure you set it to whatever frequency you want.
8. For Daily use and best battery life, Recommended Settings are 1Ghz Max, 600Mhz Min, Conservative Governer and CFQ/SIO IO Scheduler.
Another one
DOWNLOAD LINKS
Download TITANIUM KERNEL BUILD#1
Last one reserved
Changelogs-
great work buddy...! I have a suggestion that u should creat different OPP for different frequencies. It will br very easy for a normal user to change frequencies through different opp.
It seems very good!!! I will be testing for some days and if battery drain is good, will add to my rom! Thank you!!
vishal24387 said:
great work buddy...! I have a suggestion that u should creat different OPP for different frequencies. It will br very easy for a normal user to change frequencies through different opp.
Click to expand...
Click to collapse
Yes I'll be doing that.. maybe in the coming builds..
Adi_Pat, with the phone disconnected to the computer it says USB Connected and appears the screen of mass storage with the option of activate mass storage.
download link broken.
Adi_Pat said:
DOWNLOADS-
TITANIUM KERNEL BUILD 2 -
Download DDKP3 specefic kernel from here.
Download Kernel with Universal CFROOT Ramdisk from here.
Click to expand...
Click to collapse
Broken links.......Showing File deleted
Invalid or Deleted File.
Updated Download Links~!
can you make it also compatible in AOSP rom?
As I thought its not booting on my phone. Because from my experience I learned that my phone support only 1.2 ghz max. Above that phone stuck at boot screen. Can u give me test kernel with only 1.2ghx max opp????
I am going to test it right now. Would u mind, if it is powersaver enough, if I add it to my ROM (CleanKpuRom) ?
luiseteyo said:
I am going to test it right now. Would u mind, if it is powersaver enough, if I add it to my ROM (CleanKpuRom) ?
Click to expand...
Click to collapse
Wait I am uploading fixed ones which boot.
You can include it in ur ROM
vishal24387 said:
As I thought its not booting on my phone. Because from my experience I learned that my phone support only 1.2 ghz max. Above that phone stuck at boot screen. Can u give me test kernel with only 1.2ghx max opp????
Click to expand...
Click to collapse
Your device will boot now, download and flash the kernel.
Your device did not boot becuase I set startup freq to 1.35Ghz so the phone didnt have enough power to turn on.
Now you test the new uploaded kernel, it will boot and you should be fine.
Adi_Pat said:
Wait I am uploading fixed ones which boot.
You can include it in ur ROM
Click to expand...
Click to collapse
I used the uploaded and the results are AMAZING in powersave terms!! Big thangs!!
Enviado desde mi GT-I9003 usando Tapatalk
luiseteyo said:
I used the uploaded and the results are AMAZING in powersave terms!! Big thangs!!
Enviado desde mi GT-I9003 usando Tapatalk
Click to expand...
Click to collapse
Test 1.35Ghz , I made it as stable as I could.. Also can you tell me what updater script lines are needed to make the kernel cwm flashable?
Sent from my GT-I9003 using xda premium
Adi_Pat said:
Test 1.35Ghz , I made it as stable as I could.. Also can you tell me what updater script lines are needed to make the kernel cwm flashable?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I dont know wheather u have repaired the universal titanium kernel or not but on my xxkpq its not booting. I always happens whenever I use a kernel which is overclocked to 1.35 ghz. But whenever I use UC v9 1009 version kernel which is overclocked to 1.2 ghz only then my phone always boot successfully. Its something related to overclocking above 1.2ghz which my phone is not accepting.
PYD-X ExClusiVe KerneL!
Features:
-Based on HTC kernel from 3.33 (thanks to SebastianFM for the very clean kernel base - REBASED on CM source from 4.x versions)
-Included mpdecision/thermald binaries property of SebastianFM, huge, big, biggest credit to him!
-Lots improvements to performances!
-Addedd many i/o shedulers (cfq,bfq,deadline,sio,vr,noop)
-Tweaked these shedulers
-Improved CPU configuration
-3D GPU OC!
-Disabled Fsync
-Lots of modules so improved boot up time
-Improved Sched_fairs
-OTG Support - Addedd OTG Helper as app to Mount FAT32/NTFS usb drives
-Addedd Sweep2wake (as requested by users ) --- Huge thanks to GhostXSeries!!
-Custom Board File with support to Samsung S5K3H2YX Camera (Amaze 4G camera)
-New Bluetooth drivers to give support to HCI Apps (Sixaxis, wiimote, etc...)
-Addedd XZ compression support for zImage
-Improved VM ratios and ZRam (150mb actually)
-Paging moved to ZRam
-No Performance Lock!
-Tweaked Deadile and other shedulers
-Preconfigured for best balance between Performances and Battery Life!!!
-More but i don't remember >.<
Click to expand...
Click to collapse
BUGTRACKER:
-After the use of an HCI interface (Sixaxis) the WiFi stops working, needs reboot
-S5K3H2YX Camera needs other developments... - Support Complete! Kernel needs rom-side support (correct libs,etc.)
RED=High Priority!
ORANGE=Medium
GREEN=Low
Click to expand...
Click to collapse
BETA-TESTERS:
-Elemental_fire (amaze camera tester)
-GhostXSeries
-axetilen
-Super-Android
-ganeshp
-ziaulh.ch
Downloads:
***If you have problems with kernel, probably they are caused by a script included in the aroma version. Before criticize me and before bug report, clean init.d folder and try my zip with kernel only, and if it solve your problems report me please.
--I suggest to use KERNEL Tuner App to control the kernel (CPU/GPU/Vsync/Cores): HERE // HOW TO USE IT GUIDE
-------------------------------------
° Test Version 4.1.9 = Dev-Host
---Huge changes
° Beta Version 3.8.1 = Dev-Host
---I haven't much time. So i'm updating with the latest compiled beta build, the one i'm using in daily. Enjoy.
° Stable Version 3.1 = Dev-Host
**Some users have wrong flashes with ViperS rom. Follow this guide for a fix = HERE
---Code Corrections and fixes
---CIFS module is now included in the kernel
---Adjusted GPU configuration
---Corrections to the installation ZIP, more compatibility now
---Are u a benchmark fan? Look at this post: HERE // AND HERE
° Stable Version 3 = Dev-Host
---Code Fixes
---CPU Control (clocks, screen off clocks, etc...)
---Added CMD Line Interface for clock controls
---Added GPU CMD Line as optional interface
---GPU Control (2D up to 266mhz / 3D up to 320mhz)
---Standard: 200mhz 2D Core / 300mhz 3D Core
---Standard: 1566mhz MAX Cpu / 384mhz MIN / 486mhz ScreenOff MAX
---Adjusted General Kernel Configuration
---LED timer already disabled
---2WCR Support
---Updated ZRam script
---Zip now clean all the files from other kernels that can cause problems
° Stable Version 2 = Dev-Host
---ReChanged Bluetooth drivers, HCI fixed, Sixaxis totally working!!!
---Changes to GPU configuration
---Changes to Board Configuration
---More works on Camera, more code for Amaze 4g camera support on pyramid board
---MOOORE PERFORMANCES! Yes, i love a smooth ui, specially htc sense
° Stable Version 1 = Dev-Host
---Initial Release
**How to control S2W? read HERE
**Aroma installer version with settings in the second post!
AIO Kernel MOD by axetilen & iba21 (AROMA)
NON-BOOTLOOP KERNEL VERSION + Powerful Kernel Reset:
PYD-X Kernel v4.1.9 for ViperS, Sense-o-Maniac and Elegancia - Sense 4 (all versions)
Download
PYD-X Kernel v4.1.9 for Elegancia Blitz + Pegasus + ARHD (someone tested)
Download
Requirements:
- PYD-X kernel v3.8.1, v4.1.9 or higher
- SebastianFM kernel v1.5.0, 1.5.1 or v1.5.2
- Grogg kernel is also supported but not fully functional -> Run MOD for PYD-X kernel
- ROM which supports init.d folder
- S-off and rooted phone
- The latest 4EXT Touch Recovery
- AOSP/AOKP/CM10 are NOT supported
FOR MORE INFORMATION ABOUT FEATURES AND SOME NOTES, PLEASE GO TO MY THREAD
http://forum.xda-developers.com/showthread.php?t=1866127
@Credit:
- Special thanks: iba21: please give credit to him if you think this mod is useful. Click here to see his MOD for Bricked kernel
- SebastianFM: DEV of SebastianFM Kernel
- XxXPachaXxX: DEV of PYD-X Kernel
- Ghost: for helping us
DOWNLOAD:
v1.2.2
Dropbox
Mirror - see my thread
first^^
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Github source?
Sent from my Sensation
Daiskei said:
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Click to expand...
Click to collapse
Swap support of course
blahbl4hblah said:
Github source?
Sent from my Sensation
Click to expand...
Click to collapse
Uploading
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
Good to hear
Sent from my Sensation
Thanks, will try it soon
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
thanks friend .. Now I try it immediately
Good work. :good:
its working good ..but i dint see the init.d script for vsync disabling ..did you added it some where ?
EDIT: my bad ..some how assumed Fsync as Vsync silly me :silly:
Thanks for new kernel is 2way call recording supported in this kernel?
Prinz069 said:
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
Click to expand...
Click to collapse
Don't need it, i included the init script
onaj said:
Thanks for new kernel is 2way call recording supported in this kernel?
Click to expand...
Click to collapse
No, if u need i can add it
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Taker18 said:
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Click to expand...
Click to collapse
nope ..its sense based kernel
Do we have some benchmarks yet?
Thanks a lot pacha ...and Thanks to the One who added s2w ( think it was ghostxseries) ... Gonna flash now))
...sent from my sensation xe
Hi Pacha,
I used your previous tweak pack before and it was marvelous. I haven't flashed this one yet but I am sure it has the same quality.
Keep up the good work mate.
Cheers.
Thx for your kernel, just flashed it.
I'll have to work with or frist , but as i already can notice ,strings open much mfaster as before
Sent from my Sensation using xda premium
Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like fancy or bloated OP's. So I kept thread simple and clean. Changelogs are not posted here. Check link in description.
Kernel is compatible with all stock JB/ICS based ROM's.
All the best!
Click to expand...
Click to collapse
Features ( May slightly differ for JB and ICS kernel ) :-
Code:
* Based on Latest Official sources
* Compiled using Linaro 4.8 Toolchain
* Integrated CWM and TWRP Touch
* init.d support
* Google Snappy drivers
* ZRAM and SWAP support
* CleanCache
* Autoroot
* Ext 2/3/4 Support
* persistent adb
* ARM_THUMBEE support
* /rootfs and /system mounted as rw
* Added frandom
* Salvaged RAM
* Tiny RCU
* Added CIFS, NTFS, FUSE and TUN as external modules
* ro.secure=0 : Root exploit enabled via adb
* Removed debugging s**ts
* Governors : InteractiveX
OndemandX
Performance
Ondemand
Interactive
Powersave
Conservative
Smartass2
minmax
* IO Shedulers : sio
deadline
noop
cfq
VR
row
ZEN
* [COLOR="Red"]See change log or commits for detailed info.[/COLOR]
[/B]
Code:
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
Code:
[COLOR="Purple"]Instructions[/COLOR] :
* Flash the boot partition with the kernel in fastboot mode.
* Guide : [URL="http://forum.xda-developers.com/showthread.php?t=1879982"][COLOR="Blue"][U]Here[/U][/COLOR][/URL]
Credits :
FXP : for helping me with repacking into elf
srl3gx : For his CWM
Team WIN : For their TWRP recovery
All brave testers: Special thanks to julesone
Github : Source
Click to expand...
Click to collapse
F.A.Q's :-
1. Is this working on blah blah?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> Get me the logcat.
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life. See here for more info.
4. Signal is dropping since I flashed the kernel?
> Again. Not the kernel problem. Check if you have latest ( and proper ) baseband for your device.
5. Will it root my device ?
> Yes! It will automatically root your device with latest su.
6. App FC's or something crashes?
> Try reinstalling app again. Give me logcat if problem persists.
7. Does this kernel has X or Y mod?
> Do some research. Check thread, repo, commits etc.
8. Which governors/IO-schedulers to use?
> Depends on your usage. I recommend ondemandX + SIO. See here for more info.
9. I need more info on something?
> You can find all answers here
Code:
[CENTER]CODENAME OF TIPO : [COLOR="Red"]TAPIOCA[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF J : [COLOR="Red"]JLO[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF MIRO : [COLOR="Red"]MESONA[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF E : [COLOR="Red"]NANHU[/COLOR][/CENTER]
Code:
[center]
[U][URL="http://www.mediafire.com/?5ggcithwwfklf"][COLOR="BROWN"]Download Kernel[/URL][/U][/COLOR][/center]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-MSM7x27/blob/master/Changelog.txt"][COLOR="RED"]Changelog ICS[/URL][/COLOR][/U][/CENTER]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-MSM7x27-JLO/blob/master/Changelog.txt"][COLOR="RED"]Changelog JB[/URL][/COLOR][/U][/CENTER]
When you say that this rom works in tipo (tapioca)it will Works in tipo dual too ?
Thanks
Thnx Dev for working for us
Hope sooon we will have advance kernel and Cm10.1 with awesome features
Rachit Rawat said:
Edit : I need this
* Fxp boot.IMG for miro
Click to expand...
Click to collapse
here you go
is gsm stable know???
Rachit Rawat said:
Yes... But now it doesn't make any difference because GSM is broken.
Have you tried flashing baseband again?
I see CWM in your development forum. You can use that or wait till I integrate CWM.
Edit : I need this
* Fxp boot.IMG for miro
Click to expand...
Click to collapse
When i get home i´ll try flash just the baseband.
I already have cwm but i prefer an integrated one , it is easier than flash over a new flashed rom.
Hi Rachit flashed alpha 3 but it dont boot only green led shows up when i pres vol + or - it gets blue .
Re: [KERNEL][ICS] Vengeance [ALPHA-4][06/02/13]
Good news,
Xperia J has been overclocked to 1.3 GHz stable.
Very good my friend !!! :good: those modules work on tipo dual ?
alfa 4 boots on tipo dual but dual sim doesn't work. i tried flash baseband again and celphone doesn't boot anymore.
now i'm back to stock kernel.
Odp: [KERNEL][ICS] Vengeance [ALPHA-4][06/02/13]
Cool, does this kernel work on jlo now? Can it be used with FXP?
Re: [KERNEL][ICS] Vengeance [ALPHA-4][06/02/13]
for me it booted (alpha3) but cwm .... Nada
Sent from my ST21i using xda app-developers app
Re: [KERNEL][ICS] Vengeance [ALPHA-4][06/02/13]
Can anyone tell me how to use it on tipo single...I mean how to flash it 1.from cwm. .if yes then how ...do I need to wipe data or something.........
Rachit Rawat said:
Good news,
Xperia J has been overclocked to 1.3 GHz stable.
Click to expand...
Click to collapse
that is great news! i look forward to a working release so we can have a bit of extra power!!!!!!
Re: [KERNEL][ICS] Vengeance [ALPHA-4][06/02/13]
If modules don't work, try stock modules. You get them from system/lib/ modules folder in your ftf dump...
Edit : No report on alpha 4?
Edit : Who's ready to test Overclocked kernel for tipo/dual and miro?
I'm game.Put it up for tipo.
Rachit Rawat said:
If modules don't work, try stock modules. You get them from system/lib/ modules folder in your ftf dump...
Edit : No report on alpha 4?
Edit : Who's ready to test Overclocked kernel for tipo/dual and miro?
Click to expand...
Click to collapse
i'm ready overlock to tipo
saitri said:
i'm ready overlock to tipo
Click to expand...
Click to collapse
Alpha 6 : Overclocked Tipo/Dual/Miro to 1GHz
Begin by slightly raising freq in steps...
Report back ASAP
Edit : Is CWM recovery running fine?
Edit : OC on tipo : Ok
Edit : OC on miro : ?
No voltage bumps for now?Just freq?
EDIT: Booted no problems, but I can't DL any stressing apps as wifi isn't working, and neither is bluetooth.I have setCPU, and it shows 1000mhz.I also see you've set the minimum to 122mhz, which isnt recommended as it makes the phone lag.Set it to 245mhz, and it will have no problems.I'm gonna reflash to the stock kernel as I need GSM for now.Great job so far!
EDIT2:SetCPU has a stress test, running it now.
EDIT3:Ran it for 3 minutes, no errors.I think this is stable enough.Gonna play some games and see if it lags or whatnot
EDIT4:No lag at all, even temple run runs on best quality(both 1&2)with no lag.I don't have any others as I recently flashed gimlo(based on stock).I also love the cyan LED you've chose on boot, nice touch
I can't wait ur karnel freebug
great job bro
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on marshmallow roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
A new simple version (lollipop version) is available at post #2. Do check it out!
Note: R47 or later will work perfectly only on MarshMallow. Lollipop support was ended with R46.
Custom Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.3.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- MSM_hotplug driver flavored by neobuddy
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- Add State notifier driver
- Add Impulse governor(default)
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq Optimizations
- Backported hotplug thread infrastructure
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
OptimusR46NEW(Final LP version)
Mirror: (Current as well as older versions available)
Mediafire
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Flashhhh, Thecrazyskull
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Version Information
Status: Stable
Current Stable Version: R38
Stable Release Date: 2015-05-21
Created 2015-04-24
Last Updated 2015-07-14
OptimuSimple is the version that i have been using quite often now. It's not bloated with many features and works surprisingly well compared to original version. Some of it's features:
- Updated to v3.4.109
- Compiled with Linaro 4.9 Cortex A7 optimized toolchain
- Intelliplug 4.0 by faux
- Faux Sound Control
- Kcal Control by savoca
- Simple GPU Algorithm
Optimizations and governors are same as original version. It doesn't contain dt2w. So if u want dt2w flash original version from 1st post!
Download:
https://www.androidfilehost.com/?fid=24052804347833430
Looking for changelogs??
Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Good to see one more kernel
Sent From My XT1068{LP} Using TapatalK
Will try ASAP, thanks
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
hiu115 said:
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Click to expand...
Click to collapse
Camera is working fine!
You can test it for yourself
Kai Disobey said:
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
Click to expand...
Click to collapse
Glad to hear that!
srisurya95 said:
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
U r welcome
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Does it support XT1033 as well?
hiu115 said:
Does it support XT1033 as well?
Click to expand...
Click to collapse
Yes!
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
DeHuMaNiZeD said:
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
Click to expand...
Click to collapse
Thanks for reporting!
Will fix it
But the next update will take a little time!
Sry
Intellithermal plzzzz..
srisurya95 said:
Intellithermal plzzzz..
Click to expand...
Click to collapse
Intellithermal isn't entirely useful on the Moto G since it runs on low clock speeds anyway. So no heating problem.
srisurya95 said:
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry what version of blisspop you have?
today's build?
deltafile said:
sorry what version of blisspop you have?
today's build?
Click to expand...
Click to collapse
4/02
Sent from my falcon using XDA Premium 4 mobile app
srisurya95 said:
4/02
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ty im going to switch to it from candy rom
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Yo! This thread contains two kernels (regular and SuperLite). If you wanna see what SuperLite is, then go here. You should read everything before moving onto the downloads section.
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen. In the beginning I decided to keep it for my personal use only, but then I decided to share it with you guys since there was no custom kernel compatible with the 5.1 stock rom.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.3: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features: Read above!!!
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-09-07
Last Updated 2016-07-09
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Read the OP.
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Go here for that.
Q: Will this kernel work on the GPE ROM?
A: Yes. And it'll also allow you to use this ROM without having to format /data to ext4.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Kaminari SuperLite (previously "Optimized Stock Kernel")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
Enter Kaminari SuperLite!
Diferences between this & the stock kernel:
- Compiled using generic Linaro 5.3 toolchain
- Bumped to Linux version 3.4.112
- Compiled with -O3 and misc optimization flags flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Click to expand...
Click to collapse
Differences between this & Kaminari:
- All governors except Interactive removed
- AutoSMP removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Compressed using LZO (Kaminari uses XZ)
Click to expand...
Click to collapse
Wanna give it a try?
Click this link here!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions:
Same as Kaminari.
Coming from regular Kaminari? Wipe your Kernel Adiutor data first! If you can flash the stock kernel before flashing this, it's even better!
Click to expand...
Click to collapse
Reserved!!!
Reserved again
null
Wow m first...
---------- Post added at 08:25 AM ---------- Previous post was at 08:17 AM ----------
Just flashed it...buttery smooth...smartmax works like charm and yeah happy to see the kcal screen control...thanks kaminari for this amazing kernel...
So it is only for stock 5.1 right?
Edit: Working smoothly on stock 5.1
Keep it up.
Working great on XT1031 with stock 5.1. Nice job!
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
akshayk01 said:
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
No, no plans for aosp/cm support yet - mainly because of my limited knowledge. But i'll consider making a version supporting these two
New build in the works! Just trying to fix a bug where all CPU cores stay online (needless to say that this causes a gigantic battery drain)
New build up!
https://www.androidfilehost.com/?fid=24052804347811341
https://www.androidfilehost.com/?fid=24052804347811344 - "Mori" version - with S2W/DT2W
Changelog here.
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
amarc78 said:
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
Click to expand...
Click to collapse
The previous zips i made here worked fine (i flash them through adb sideload). And i just fixed the init.kaminari.sh. Plus i've fixed s2w/s2s in the Mori version (dt2w is still partly broken though).
New build up!
Version: 0.96b
Download: Regular Version | "Mori" Version (DT2W)
Changelog here, but for those who don't wanna go there:
- Fixed s2w (dt2w halfscreen is still broken)
- Fixed derp in init.kaminari.sh
GPE users, please test my builds if you can / feel courageous enough to do it
I give up, except for the first build, they won't flash in recovery for me.
amarc78 said:
I give up, except for the first build, they won't flash in recovery for me.
Click to expand...
Click to collapse
I'll upload a zip without anykernel later. Btw, which version of twrp are you on? And do you have sufficient space in /system? Because this kernel pushes modules to it. I'm on twrp 2.8.7.0 + a modified stock rom, and i've had zero flashing errors so far
For those who are having problems with anykernel, i've uploaded special flashable zips without it.
Version is still 0.96b.
Downloads: Regular | DT2W
Version 096b flashed without any problems.
Just put the zip in the root of internal storage.
cool everything is just superb @kingkaminari hope you keep updating this kernel