Related
If you are a developer, and wish to have a device merged into Omni, here is the current "temporary" process to use. There are 2 ways to do this - make your tree available on github (or a similar service), or request a new git tree be created, and submit it to gerrit.
1) Get your device working. There's plenty of help available in #omnirom on Freenode if you need assistance. An AOSP device tree is probably the best place to get started.
2) Set up your device to use the OmniROM "custom" build type, rather than full/aosp. More information will follow on this step - check device/samsung/manta or device/lge/mako for an example.
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
4) Come to #omni on Freenode, and have a chat to one of the core developers (they are listed at the top of the user list) - they will be able to help you get your device merged
Please note, in order to add a new device, we will require a maintainer on an ongoing basis for it, to ensure someone is able to investigate bugs that users report on a device. Without this, we unfortunately cannot enable nightly builds for a device.
will a cm kernel tree work for the most part with just a few changes?
azoller1 said:
will a cm kernel tree work for the most part with just a few changes?
Click to expand...
Click to collapse
yes - of course it must be 10.2 (4.3)
most likly it will work even unchanged
pulser_g2 said:
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
Click to expand...
Click to collapse
Along these lines, do NOT remove copyright attributions of a changed file. You may ADD copyrights to a header, but do NOT remove anything.
maxwen said:
yes - of course it must be 10.2 (4.3)
most likly it will work even unchanged
Click to expand...
Click to collapse
Most likely kernel change will be that reverting out that MDP sync point mess used by CM's AOSP+CAF frankendisplay. Can't link to it from my current location.
I have everything device sided transformed to Omni (m7ul,m7-common,and msm8960) and have exactly this problem now. Builds fine but Stucks after a few secs booting and hard reboots. Already looked into kmsg with maxwen but now we need to find what's causing it...
Reverted some stuff (MDP) kernel sided but haven't succeeded so far. Would be appreciated if u point us there when u back on a pc
noNeedForAsig
TF300T
OK here goes..
For the Asus Transformer TF300T the kernel forked from the CyanogenMod github:
https://github.com/scanno/android_kernel_asus_tf300t/tree/android-4.3
And the device tree, modified to get OmniROM to finish the build and get a bootable result:
https://github.com/scanno/android_device_asus_tf300t/tree/android-4.3
Hopefully it will be added to the OmniROM github.
n3ocort3x said:
I have everything device sided transformed to Omni (m7ul,m7-common,and msm8960) and have exactly this problem now. Builds fine but Stucks after a few secs booting and hard reboots. Already looked into kmsg with maxwen but now we need to find what's causing it...
Reverted some stuff (MDP) kernel sided but haven't succeeded so far. Would be appreciated if u point us there when u back on a pc
noNeedForAsig
Click to expand...
Click to collapse
I'm thinking for m7ul it would be https://github.com/CyanogenMod/android_kernel_htc_m7/commit/f2efb02581110747711c8b17f31f38fc3ed5dd1a
Don't want to hijack the thread though, so we can probably discuss this elsewhere
@Grarak Maybe you should post your edited device tree for Omni Rom =)
Sent From my i9500 With ☆★Crash Rom★☆
AL_IRAQI said:
@Grarak Maybe you should post your edited device tree for Omni Rom =)
Sent From my i9500 With ☆★Crash Rom★☆
Click to expand...
Click to collapse
Already on my github
https://github.com/Grarak/android_device_samsung_i9500
kernel tree
https://github.com/Grarak/android_kernel_samsung_exynos5410
proprietary
https://github.com/Grarak/proprietary_vendor_samsung
exynos 5410 repos:
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5410
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5-insignal
https://github.com/intervigilium/android_hardware_samsung_slsi_openmax
pretty much ^^
I'd like to maintain for l900 and i605 (Sprint and Verizon Galaxy Note 2).
device trees
https://github.com/omnirom-slickrick/android_device_samsung_l900 (sprint tree)
https://github.com/omnirom-slickrick/android_device_samsung_i605 (vzw tree)
https://github.com/omnirom-slickrick/android_device_samsung_t0lte (note 2 common tree)
https://github.com/omnirom-slickrick/android_device_samsung_smdk4412-common (same as tree on omnirom github but actually more updated and device settings added back)
kernel
https://github.com/omnirom-slickrick/android_kernel_samsung_smdk4412 (just have needed device settings commits added back in)
thracky said:
I'm thinking for m7ul it would be https://github.com/CyanogenMod/android_kernel_htc_m7/commit/f2efb02581110747711c8b17f31f38fc3ed5dd1a
Don't want to hijack the thread though, so we can probably discuss this elsewhere
Click to expand...
Click to collapse
we already making progress but it needs more work to be done.. at least we are now in system with working wifi, and display but modem doesent work.. something for tomorrow, and i dont want to hijack this thread too sorry if my question was in the wrong section but i thought i mention it because of the post above mine. nevermind i cann offer to maintain m7ul as already discussed with maxwen and oin IRC but a lot of work needs to be done:
here are my sources, device trees are usable but kernel needs more work as said above:
device trees:
https://github.com/n3ocort3x/android_device_htc_m7ul
https://github.com/n3ocort3x/android_device_htc_m7-common
https://github.com/n3ocort3x/android_device_htc_msm8960-common
kernel: its a modified one but its no problem to bring it back to stock features and will push as soon asap the modem stuff is sorted out
https://github.com/n3ocort3x/android_kernel_htc_m7
EDIT modem fixed, only BT left
@sykomaniac , look at first post and become a maintainer
pulser_g2 said:
If you are a developer, and wish to have a device merged into Omni, here is the current "temporary" process to use. There are 2 ways to do this - make your tree available on github (or a similar service), or request a new git tree be created, and submit it to gerrit.
1) Get your device working. There's plenty of help available in #omnirom on Freenode if you need assistance. An AOSP device tree is probably the best place to get started.
2) Set up your device to use the OmniROM "custom" build type, rather than full/aosp. More information will follow on this step - check device/samsung/manta or device/lge/mako for an example.
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
4) Post a link here to the device tree (and kernel repository) for review, and tell us what device it is (give model numbers and board names and as many details as possible )
Click to expand...
Click to collapse
We have quite a few things that aren't working like bluetooth, camera is buggy, H/W vsync, gps, and fm radio.
https://github.com/SeannyM/android_device_samsung_kylessopen
https://github.com/SeannyM/ba2x-kernel
gt-s7560m with quadband gsm and 850/1900/2100 WCDMA/UTMS
We have a MSM7227a cpu armv7 clocked at 1008mhz stock.
645mb of usable ram
4gb of storage with 1.7 usable
233 dpi 800x480 4inch screen
Adreno 200 enhanced
5mp camera 1.3 front facing
hopefully we can get something official
single sim
Gtab2 10.1 Wifi & 3G (p5110 & p5100)
There you have my device tree for omni
p5110 :
https://github.com/sevenup30/android_device_samsung_p5110
p5100:
https://github.com/sevenup30/android_device_samsung_p5100
omap4-common (had to edit it cuz of duplicate libion entry):
https://github.com/sevenup30/android_device_samsung_omap4-common
other dependencies required from CM & Themuppets
kernel :
https://github.com/CyanogenMod/android_kernel_samsung_espresso10
samsung proprietary:
https://github.com/TheMuppets/proprietary_vendor_samsung
samsung hardware:
https://github.com/CyanogenMod/android_hardware_samsung
apps samsung service:
https://github.com/CyanogenMod/android_packages_apps_SamsungServiceMode
Everything is working (sound / wifi / bluetooth / video playback) BUT!
I must edit build.prop by hand to get sound working until omni build process take care of "product_build_prop_overrides" into custom_XXXX.mk
see:
http://forum.xda-developers.com/showthread.php?t=2484747
Original Samsung Galaxy Note
Samsung n7000 initial bringup:
Modified CM n7000 device: https://github.com/chasmodo/android_device_samsung_n7000/tree/android-4.3
Modified CM galaxys2-common: https://github.com/chasmodo/android_device_samsung_galaxys2-common/tree/android-4.3
CM smdk4412 kernel: https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-10.2
Samsung proprietary stuff: https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-10.2
Samsung hardware tree untouched from OmniRom.
Device info:
Board platform - exynos4
SOC - exynos4210
Board name - smdk4210
Kernel specifics - unified kernel and recovery
It compiles fine using the repos listed above, but throws up a kernel assert error when flashing the Rom. Several compilers for different devices complained about it in the 'All the answers' thread. The way out of this is to flash a CM10.2 kernel immediately after the Rom flash aborts, then Omni boots up fine.
What works:
1. telephony
2. mms
3. WiFi
4. GPS
What doesn't work:
1. data
2. bluetooth turns off as soon as you turn it on
3. both sdcards are invisible from Android; all your stuff is there when you drop into recovery, though
4. Settings/Storage FC when tapped - see #3
5. Performance options also FC
6. Notification drawer cannot be pulled down
Camera cannot be tested because it shuts down as soon as you start it, saying: "No external storage available" - again, see #3
Galaxy Note II / N7100 (International)
Samsung Galaxy Note II / N7100 Bring up details.
I have a working build of the Omni rom for the N7100. Below are the details on what is working and not working. i have been using it for the last 2 days, so far not crashes or reboots all seems to be working fine. i cherry picked a few commits and included it into my build
Working :
WIFI
DATA -3G & 2G
Telephony & MMS & SMS
GPS
Sound
Camera (Both Front and Back)
SD card
Performance control
Notification drawer & Lights
Multi-Window
roadrunner
Not Working :
BT
Backlights(if i install a custom kernel then the lights work)
Device Tree for N7100 - https://github.com/tilaksidduram/device_samsung_n7100
Device smdk4412-common - https://github.com/tilaksidduram/android_device_samsung_smdk4412-common
smdk-4412 Kernel (3.0.100) - https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
samsung hardware - https://github.com/CyanogenMod/android_hardware_samsung
DEVICE: GT-N7100
sources
https://www.github.com/UtkarshGupta/android_device_samsung_n7100
https://www.github.com/omnirom/android_device_samsung_smdk4412-common
https://www.github.com/omnirom/android_hardware_samsung
https://www.github.com/omnirom/android_kernel_samsung_smdk4412
https://www.github.com/TheMuppets/proprietary_vendor_samsung
Is anyone else working on d2att/d2can (Galaxy S3 I747)? I'm not overly familiar with ROM development, but I can compile CM10.2 for this device just fine, and I'm slowly working on getting Omni to compile for it as well. If someone more experienced than I is already working on it though, I'll probably just let them do it.
If I am the only one, expect some newb-ish questions in the near future.
dstruct2k said:
Is anyone else working on d2att/d2can (Galaxy S3 I747)? I'm not overly familiar with ROM development, but I can compile CM10.2 for this device just fine, and I'm slowly working on getting Omni to compile for it as well. If someone more experienced than I is already working on it though, I'll probably just let them do it.
If I am the only one, expect some newb-ish questions in the near future.
Click to expand...
Click to collapse
I think a few are... There has been chat of it in the IRC channels.
Device name: LG Optimus 4X HD
Codename: P880
Board name: X3
Chipset: Tegra 3 AP33
Everything works, except button backlight.
https://github.com/Adam77Root/android_device_lge_p880
https://github.com/Adam77Root/android_kernel_lge_x3
https://github.com/TheMuppets/proprietary_vendor_lge
Hi to all Broadcom BCM215XX armv6 devices running android!
I'm glad to announce that, our organisation, BroadcomCM will start working on the port of AOSP ICS drivers for our CPU and GPU, BCM21553. First of all, I've asked moderators to close all my threads, why? We know we have [GENERAL] Thread for our projects but most users don't care, so this will be the thread to talk about it, development!.
Samsung stopped the development on this devices long ago, but their drivers where not ever released. Thanks to our petition, we have managed to force Broadcom to release the drivers, and we managed to release them on ICS, android 4.0+, way!
Index:
Post 1 (this) ...................................... Information about drivers
Post 2 .............................................. Frequently asked questions
Post 3 .............................................. Drivers on Github (Opensource)
Post 4 .............................................. Videos showing HW working
Click to expand...
Click to collapse
A bit of introduction:
Broadcom gave to us test driver builds, which were prebuilt, .so libraries, and we could not edit them, but they gave us the code to patch framework to make those prebuilt libraries work with our AOSP project (by that time, CyanogenMod 7.2). After some re-search and lot of work on our team (thanks Legolas93), I managed to implement AOSP Alcatel drivers to our CyanogenMod 7.2 Based ROM. This was the biggest change ever happened to that device, as we managed to fix 100% HW and as a cosnequence, libstatgefright was fixed too, and HGL. This resulted on camera/vide recordi (media profiles, encoding and decoding) to work, this was RC1. REMEMBER: As we extracted this libs from sotck AOSP alcatel ROM they are prebuilt, so we can not modify them at all.
SInce that moment, project on HW was stopped, and we focused to fix other issues not releted to HW (ext4, backlight, led, tethering, BT...), and we managed (most of them), and everyone enjoys now a CM, AOSP and Cyanmobile port brought to you by broadcomCM.
What else?
Broadcom released, or seemed to, BCM21553 driver source for AOSP ICS source. They released the source, so now we can know how our chip work. What is weird about it, is that this chip is released for ICS source, when it is an armv6 chip, and any device of our family has official ICS. (Maybe BROADCOM are really nice people, or maybe they trolled us). We will add new tag to be defined on Boardconfig.mk to make the drivers work on it.
So.. We did it?
Yes, we forced Broadcom to release the source, you, we, we all did this possible, and we should be prud of ourselves.
Will with this come BroadcomCM to develop?
Well, yes and no, we already have some surpises for BroadcomCM ROMs owner, which were not reletated to drivers at all, and they affect all devices. As this work is nearly finished (first alpha), we will release this next week, and then we will start working on it. Keep calm, good things make people wait for it don't ?
What is now?
Now, nice question. We will implement this source code on our CM9, ICS, branch. (all sources can be found on our github), and implement them on the build, will that be easy? OF COURSE NOT. Broadcom trolled us with first test builds of drivers, so maybe expect the same from that sources, we don't know and we will not know unitl we build it, and we have to compare each file, ONE PER ONE, so it will be a hard work.
Frequently asked questions can be found on the second post, as well as a video to show you what was having a device with drivers, and what was not. (Qualcomm vs Broadcom [armv6]).
ANY ETA? (Estimated Time of Arrival)
No. I can not tell any eta, I'll maintain you informed to you on this thread. I'll start my work next week (Exams on this one, need to study ), and I'll keep calm, I'm as amazed as you, but we have to be very down to earth. Broadcom lied to us, maybe they made it too. It will take some time to study and implement, and then make them work!
WILL THAT FIX ALL THE ISSUES WE HAVE ON ICS?
No, but will fix the most important one, HW. What I mean by hardware is the animations will be smooth, video on second post. So hopefully we will run a good ICS build, but expect camera and Audio not working too. Audio? Well some progress have been made on shadows, camera? That will be hard, really hard. Even Cooper (Galaxy Ace MSM7x27 based chip wasn't able to run camera at the first, since Qualcomm not release their source too).
AND WHAT ABOUT CM7 (2.3.7 based roms)?
We hope 2.3.7 ROMs will benefict from it, but we are not sure, we will have to test them and implement on our CM7 tree, but as they are for ICS, or this seems to, first goal is ICS, as we have 100% HW working, but with prebuilt, for the moment is OK and not our priority,
CAN I IMPLEMENT THE DRIVERS ON MY DEVICE?
No, to implement those dirvers you will need big knowledge of BroadcomCM devices, and I think our team has. We have managed to solve many bugs, and, talk with broadocm to solve first driver errors we had.
Ok, we have managed to get drivers working on our CyanogenMod 9.1 Ice Cream Sandwich version 4.0.4. Remember the drivers were given in 4.0.1 which were a bit different from actual 4.0.4 used.
After the release of the ROM with first version of those drivers included, we are glad to announce that, as always, we opensourced this "4.0.4 drivers" as well as Broadcom did. Feel free to take them, and use it at your own, to build diferent ROMs, such as AOKP, Paranoid, AOSP... Or Jelly Bean . This are drivers source, you will need to cherry-pick them to your local repo:
/bionic
/frameworks/base
/hardware/libhardware
/system/core
Broadcom was nice, and they created a new HGL lib, which they open-sourced too, and give the name of libv3d, kind of a new HGL lib, which should complish all patches and BCM21553 requiriments, also opensourced on BroadcomCM.
/brcm_usrlib also known as libv3d
You can also find original patch on Broadcom's page (4.0.1 patch) and the diff files I've made, which they will give you more clues on how to implement them on other sources.
On those videos, we can see that those drivers are fully working! Thanks for those youtubers, we can show to the world that WE DID IT!
ME presenting those drivers:
COOPERVE:
TOTORO:
TASSVE:
CORI: (WIP)
you guys are amazing,thanx for all............
Does this mean we can build other roms as well?
like aokp / paranoid android / pac /miui etc.
Anyhoo, I wish you goodluck.
u doing a great job buddy.
keep it up. :thumb:
n best of luck for ur exams..
---------- Post added at 11:18 PM ---------- Previous post was at 11:18 PM ----------
CharsiBabu said:
Does this mean we can build other roms as well?
like aokp / paranoid android / pac /miui etc.
Anyhoo, I wish you goodluck.
Click to expand...
Click to collapse
yup..
Always Great biel and his team..
using the great ace -i
Only these lines in legacy_prebuilts.mk already made me start to give up the drivers must be another troll source, maybe I'm wrong...
libEGL_POWERVR_SGX530_121.so \
libEGL_tegra.so \
libGLESv1_CM_POWERVR_SGX530_121.so \
libGLESv1_CM_tegra.so \
libGLESv2_POWERVR_SGX530_121.so \
libGLESv2_tegra.so \
Maybe they gave us fake one or another test builds. Still will take time months/year. Just buy new phone. This doesnt worth it.
Good luck, BroadcomCM!
It means,that we can expect cm9 only woth not working camera and sound?
This is some real good news if the broadcomCM have given the proper sources... Well, let's hope bielt.v keeps us updates
Dr.Pepper said:
It means,that we can expect cm9 only woth not working camera and sound?
Click to expand...
Click to collapse
If we get stable cm9 thats also great for us..
using the great ace -i
I highly doubt a big manufacturer would "troll" its consumers and volunteer developers with "fake" driver sources.
Sent from my GT-I9195 using xda app-developers app
I don't think they trolled us, they wrote a documentation and made an announcement for Fake drivers? A big manufacturer like broadcom will not play hide and seek with us, they know that they will lose their respect.
Sent from my GT-S5360 using Tapatalk 2
NICE!
CharsiBabu said:
Does this mean we can build other roms as well?
like aokp / paranoid android / pac /miui etc.
Anyhoo, I wish you goodluck.
Click to expand...
Click to collapse
We can leterally "port" those, (copy paste u know, lol)
Mitko said:
I highly doubt a big manufacturer would "troll" its consumers and volunteer developers with "fake" driver sources.
Sent from my GT-I9195 using xda app-developers app
Click to expand...
Click to collapse
Its natural, lol, happens once in a millenium, but these maybe true... but one thing is serioussly doubtful that the readme says
Readme.txt: last line:
make -j8 TARGET_DEVICE=generic_armv5
Click to expand...
Click to collapse
and armv5 doesn't exist ?? && moreover our bcm21553 devices are more likely to be armv6 variations....
really confuses me
Code:
I havent done enough research tho (due to less time on pc)
can anybody explain me that ??
There a long-long way to go. hopefully the awaited days come with good news.
XDA-Developer App
So I'm noodling through the source code, and I guess I'm gonna see what I can do to try and compile something for the Raspberry Pi. Fingers crossed.
EDIT: Also, according to wiki, ARMv5 is in fact a thing. Who knew?
http://en.wikipedia.org/wiki/ARM_architecture
First off, I just want to say I don't mean to step on anyone's toes. Thanks for all the work so far from digitalhigh, bracketslash, santod040 and everyone who has posted information about or commits to the CM12 build tree. This is not my code, all I have done is disable enough stuff to get it to build and boot. A LOT OF STUFF IS BROKEN. This is intended for developers only right now. I will try to update the builds as I can but please don't expect true nightly builds.
DISCLAIMER: I am in no way responsible for malfunctioning or bricked devices if you run this software. If you do not agree to these terms, DO NOT DOWNLOAD. Again, this is seriously broken right now.
What doesn't work:
-Almost everything
What works:
-Wifi
-Touchscreen
-Sound
Changelog:
Merged (compare to build date)
Open (not in build yet)
Installation notes:
As I have yet to find a way to easily disable NFC for the builds, you will have to remove the /system/app/Nfc to stop those force closes. I just went to TWRP, mounted system, then ran "rm -rf /system/app/Nfc" to disable NFC for now.
Downloads:
2014-11-17: Download (Android File Host)
Edit: Please see bracketslash's thread for future downloads: http://forum.xda-developers.com/ver...ment/cm12-unofficial-unstable-builds-t2941198
bring it on bro
This saved me some time. Guess I'll see what I can do.
There was a new commit added to the open section that "adds dependency on device/qcom/sepolicy"
http://review.cyanogenmod.org/#/q/status:open+project:CyanogenMod/android_device_htc_m8,n,z
That was fast!
krazie1 said:
There was a new commit added to the open section that "adds dependency on device/qcom/sepolicy"
http://review.cyanogenmod.org/#/q/status:open+project:CyanogenMod/android_device_htc_m8,n,z
Click to expand...
Click to collapse
Thanks for info. I'll probably just wait on that one to get merged as so much is broken already. I doubt selinux will be the cause of frustration right now Also for anyone interested I made the following modifications to the cm12.0 branch to get this to build:
1) Created local_manifest.xml with muppeteers 12.0 branch
2) Commented out DotCase line in device/htc/m8/device.mk (has issues building)
3) Commented out ro.cwm.forbid_mount and ro.cwm.forbid_format lines in device/htc/m8/system.prop (too long)
4) Added missing overlay resources to main resources (copy the missing variables from build/overlay/frameworks/blah.xml to frameworks/blah.xml)
Ive been patiently waiting for cm12 on this beast
This should be in HTC one m8 original development not the Verizon section. If you want more attention and to help people out repose there
jake.99x3 said:
This should be in HTC one m8 original development not the Verizon section. If you want more attention and to help people out repose there
Click to expand...
Click to collapse
Given the intro post on the "original development" forums, I feel my topic is still more applicable in this section.
http://www.xda-developers.com/android/introducing-original-development-forums-for-more-devices/
djh816 said:
Given the intro post on the "original development" forums, I feel my topic is still more applicable in this section.
http://www.xda-developers.com/android/introducing-original-development-forums-for-more-devices/
Click to expand...
Click to collapse
Good point so then move it to android development. Cm is for all device variants not specifically verizon and won't get Much attention here.
jake.99x3 said:
Good point so then move it to android development. Cm is for all device variants not specifically verizon and won't get Much attention here.
Click to expand...
Click to collapse
While I agree it may not get as much attention, I still think this is the proper place. Android development (not m8 android development) is more for universal android projects or new code bases or ROMs for devices that don't have their own sub forum. That being said, this is a build of already existing code so it should go into a "development" section and given that I only plan to get this working on Verizon variant (as that's what I have) I avoided posting to the generic m8 sub forum. Mods can move as they feel fit but I think it belongs here Feel free to repost any info I have here though.
I'm trying to build and I'm getting stuck on the proprietary binaries.
Specifically this:
Code:
make: *** No rule to make target `vendor/htc/m8/proprietary/bin/adsprpcd', needed by `/home/build/cm12/out/target/product/m8/system/bin/adsprpcd'. Stop.
Any advice?
-xdadevelopers-user
xdadevelopers-user said:
I'm trying to build and I'm getting stuck on the proprietary binaries.
Specifically this:
Code:
make: *** No rule to make target `vendor/htc/m8/proprietary/bin/adsprpcd', needed by `/home/build/cm12/out/target/product/m8/system/bin/adsprpcd'. Stop.
Any advice?
-xdadevelopers-user
Click to expand...
Click to collapse
Hmm I didn't run into this. I just used the get-prebuilts command and didn't have any issue after. I followed these but modified for 12.0 branch:
http://forum.xda-developers.com/ver.../how-to-build-cm11-htc-one-m8-082714-t2860056
Just make sure your local_manifest.xml file has the 12.0 muppeteers branch as shown in example on page 6 of that thread.
djh816 said:
Hmm I didn't run into this. I just used the get-prebuilts command and didn't have any issue after. I followed these but modified for 12.0 branch:
http://forum.xda-developers.com/ver.../how-to-build-cm11-htc-one-m8-082714-t2860056
Just make sure your local_manifest.xml file has the 12.0 muppeteers branch as shown in example on page 6 of that thread.
Click to expand...
Click to collapse
@djh816
Hi compile ROM cm11 for a different device
Could you tell me which Java version are you using to build cm12, since you have just built cm12?
I tried to built cm12 yesterday and I got an error for Java so I installed OpenJDK7 and the it started building but I am getting a lot of non-device related error saying "internal compilation error"
I even tried removing all java version and re-installing OpenJDK7. Set alterantives too but no luck.
So please could you let me know which Java Version are you using for building cm12?
OpenJDK7 or Oracle/sun 7
Thanks
macs18max said:
@djh816
Hi compile ROM cm11 for a different device
Could you tell me which Java version are you using to build cm12, since you have just built cm12?
I tried to built cm12 yesterday and I got an error for Java so I installed OpenJDK7 and the it started building but I am getting a lot of non-device related error saying "internal compilation error"
I even tried removing all java version and re-installing OpenJDK7. Set alterantives too but no luck.
So please could you let me know which Java Version are you using for building cm12?
OpenJDK7 or Oracle/sun 7
Thanks
Click to expand...
Click to collapse
I started with clean ubuntu 14.04 lts x64 and added the packages from bracketslash's thread here. Then I just installed openjdk-7-jdk and openjdk-7-jre after that.
djh816 said:
While I agree it may not get as much attention, I still think this is the proper place. Android development (not m8 android development) is more for universal android projects or new code bases or ROMs for devices that don't have their own sub forum. That being said, this is a build of already existing code so it should go into a "development" section and given that I only plan to get this working on Verizon variant (as that's what I have) I avoided posting to the generic m8 sub forum. Mods can move as they feel fit but I think it belongs here Feel free to repost any info I have here though.
Click to expand...
Click to collapse
HTC One M7 has fully working CM12 build, and that is in ANDROID DEVELOPMENT SECTION The Op said that he has working CM12 rom for M8, you might ask him for advice, how to make your build more stable and with less bugs. That's my opinion anyways. You can check the build for M7 here http://forum.xda-developers.com/htc-one/development/5-0-lollipop-unofficial-cm12-android-5-0-t2943826 :good:
djh816 said:
Thanks for info. I'll probably just wait on that one to get merged as so much is broken already. I doubt selinux will be the cause of frustration right now Also for anyone interested I made the following modifications to the cm12.0 branch to get this to build:
1) Created local_manifest.xml with muppeteers 12.0 branch
2) Commented out DotCase line in device/htc/m8/device.mk (has issues building)
3) Commented out ro.cwm.forbid_mount and ro.cwm.forbid_format lines in device/htc/m8/system.prop (too long)
4) Added missing overlay resources to main resources (copy the missing variables from build/overlay/frameworks/blah.xml to frameworks/blah.xml)
Click to expand...
Click to collapse
You don't need to do all of that.
There's one commit and everything works just fine.... nothing's broken.
http://review.cyanogenmod.org/#/c/76760
...and you may just want to thank invisiblek in your original post. He's the only one that did all of the work to bring up the device.
Gunman84 said:
HTC One M7 has fully working CM12 build, and that is in ANDROID DEVELOPMENT SECTION The Op said that he has working CM12 rom for M8, you might ask him for advice, how to make your build more stable and with less bugs. That's my opinion anyways. You can check the build for M7 here http://forum.xda-developers.com/htc-one/development/5-0-lollipop-unofficial-cm12-android-5-0-t2943826 :good:
Click to expand...
Click to collapse
calling @santod040 for some cm love for m8vzw
munchy_cool said:
calling @santod040 for some cm love for m8vzw
Click to expand...
Click to collapse
if someone wants to make a donation to me, i will cherry pick a commit and brunch a completely working build (apart from universal cm issues).
ajrty33 said:
if someone wants to make a donation to me, i will cherry pick a commit and brunch a completely working build (apart from universal cm issues).
Click to expand...
Click to collapse
Welcome to XDA ..
Lollipop Red M8
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. So don't be an *** ****
*/
hi.. i'm already started make some modifications on ROM with other Brazilian DEV's for "Evertek S.A - SKMtek Genesis Tab GT7305"... we already found the source kernel from another Netbook or Development Board PC who uses the same SOC... but nothing already have been maked to kernel, we use the provided kernel from stock (Kernel 3.4.5+)... and about the ROM we already have two custom ROM's... One is Stock Modded (4.2.2) and another is KitKat Ported ROM from another Evertek Device... *Portuguese-Brazil Language Site/Forum
And we already make some modifications to this KK port...
- ROOT
- BusyBox
- Init.D support
- Build.Prop Mods
- SuperUser
- zipalign apps after boot
.. and other mods.
we already make too much on ROM but nothing about kernel... we want make a better kernel with optimizations and a better TCP/Clock Table, More Governors , More I/O Scheduler and maybe Overclock to 1600mhz to start after have a custom Kernel booting...
Now we need someone who understand about recovery's like CWM or TWRP and Kernel Compilation better than me to we can start make something awesome =D i think this can be used to another company's/Chinese tablets too, using the same SOC (WM8880) evidently... . . . (Found^^Working^^Recovery's)
i can't start testing here because if i flash this kernel using the Stock Recovery (WonderMedia Recovery tool) maybe i can possible brick my tablet... so if someone understand about CMW recovery to start would be nice =D
Update Progress / ChangeLog ¬
Code:
# 25/12:
- [STRIKE]Found Possible match [URL="http://forum.xda-developers.com/showthread.php?t=2305268"]CWM port[/URL] from [URL="http://forum.xda-developers.com/showthread.php?t=2216390"]Asus MeMo Pad 7{ME172V}[/URL] on XDA Forum[/STRIKE] #NOPE...
- FOUND WOKING [URL="http://blog.hadi-cpu.com/2013/09/cwm-recovery-6036-w8850-rc2.html"]CWM Recovery[/URL] from Malasya Blog from Generic WM8850 SOC tablet , Founded [URL="http://blog.hadi-cpu.com/2013/10/twrp-touch-wondermedia-wm8850-jb-version.html"]TWRP recovery[/URL] too but not tested (Thanks to #Rollidark to notify me about and #osinaldi to discover that from malasya blog) [Mirrors -> [URL="https://www.4shared.com/rar/2POyc0B0ba/CWM_WM8850_NSFAT-RC2.htm?sop=true"]CMW[/URL] -> [URL="https://www.4shared.com/rar/rJBfUTQF/TWRP-JB-NSFAT-WM8850.htm"]TWRP[/URL]] // [URL="https://www.facebook.com/groups/NewSmartFrenAndroTab/"]Facebook Group of Recovery Developers[/URL]
- Studying some way to introduce the missing Touch driver to kernel from [URL="https://gist.github.com/psachin"]psachin Github[/URL]|[URL="http://cdn.liliputing.com/wp-content/uploads/2013/01/rock_02.jpg"]apc-rock-II-[/URL]|[URL="https://github.com/psachin/apc-rock-II-kernel"]kernel[/URL] how already modded the Source to work with [URL="http://tinyurl.com/oqxmuam"]Generic Netbook[/URL] who uses the same SOC
-- Merry Christmas to #ALL
# ?? to 23~24/12:
- ROM JB and KK + ADV. Patch developed by Brazilian Dev's team
- found Source Kernel to WM8880 SoC
Brazilian Developers who already help this projects from forum - genesiseries :
Code:
# KK ROM:
- #paulomsilva2006 {KitKat ROM Port}
- #Rollidark {KitKat Patch}
- #Wcfuria
- #? - Pedro Alves
- #? - Pedro Victor
- #? - Walter Moretti
- #? - Moises Teixeira
Code:
# JB Stock ROM:
- #ylukasy {ROM Dev.}
- #Rollidark
- #paulomsilva2006
- +?
if i forget someone.. please comment below :highfive:
Reserved
wow there's only a handful on and off development going on for this SoC, I still keep my WM8880 tablet just in case somebody made a breakthrough in doing Custom ROM or even getting real ubuntu/debian to boot natively... are you still on this?
funtikar said:
wow there's only a handful on and off development going on for this SoC, I still keep my WM8880 tablet just in case somebody made a breakthrough in doing Custom ROM or even getting real ubuntu/debian to boot natively... are you still on this?
Click to expand...
Click to collapse
just a few Brazilian and Malasya Developers still make progress with this SoC... if you want to try install the custom ROM´s i have shared upper topic.. it will be by your won and I am not responsible for bricked devices...
i´m already started make progress with Custom Kernel but i need found the touch screen driver source and re-work the sound driver(Alsa Drivers...) and compile the recovery with kernel too.. to than have some trust on my work to flash it on tablet =#
:highfive:
DvDwx. said:
just a few Brazilian and Malasya Developers still make progress with this SoC... if you want to try install the custom ROM´s i have shared upper topic.. it will be by your won and I am not responsible for bricked devices...
i´m already started make progress with Custom Kernel but i need found the touch screen driver source and re-work the sound driver(Alsa Drivers...) and compile the recovery with kernel too.. to than have some trust on my work to flash it on tablet =#
:highfive:
Click to expand...
Click to collapse
meh, its my rom testing ground anyway not really worried .. i actually have the tablet connect directly from the battery wires(the battery removed) to the adapter(usb)... anything is better than nothing for the development hehe...wait by Malasya do u mean Malaysia? whos that developer lol..
funtikar said:
meh, its my rom testing ground anyway not really worried .. i actually have the tablet connect directly from the battery wires(the battery removed) to the adapter(usb)... anything is better than nothing for the development hehe...wait by Malasya do u mean Malaysia? whos that developer lol..
Click to expand...
Click to collapse
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
DvDwx. said:
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
Click to expand...
Click to collapse
what a coincidence , I was wondering today when you will reply lol
ah I see too bad, maybe you will share it at techknowme forum, ... wow Malaysian ?, Im asking because I'm Malaysian, can you pm me the link where its shared?
DvDwx. said:
i mean Malaysia.. the country... because i don't have found the real developer.. only the Facebook's group where it have been shared... i write too fast and don't check if i write it correct too...
--
i Already compile the kernel with CMW recovery and flashed on tablet ... but i need find the Touchpad driver to make he work properly... i stay getting some other minor issues on logcat/kmsg reports...
but i already test four touch drivers and anyone works... only OTG stay working.. that is the problem on developing the kernel without the official source release by the producer company... maybe i will need close this developing project because that =/
Click to expand...
Click to collapse
please continue developing this project..i have using acer b1 740 and it dont have android 4.4 update
tuyenat3 said:
please continue developing this project..i have using acer b1 740 and it dont have android 4.4 update
Click to expand...
Click to collapse
man... i just don't want blame anyone but... to we can do something to your tablet we need the kernel source and that don't stay open to developers... on this Chinese tablets we have some little configurations to can work with... but the custom kernel project i need to abandon for two reasons... first i don't have much time to can work to create a stable and functional custom kernel to everyone... second i don't have a kernel source compatible with tablets... what i found is from a electronics engineering Project computer Board ... and to it can fit on tablet is missing too much drivers compatibles with to can work smoothly and functional... someday if i found a new source maybe i can try comeback developer something to that =#
please continue developing this project
I use a genesis 7305 his kernel is very poorly optimized would like to make this usable tablet sorry for my bad English I use Google translator ;-;
2021... I tried to put a Chinese rom, but I brick the tablet, it only responds to fastboot, when I put the sudo command fastboot flash:raw boot uzImage.bin ramdisk.bin and plug in the charger and press power it appears a genesis screen.
Boot FOSSEE-OS from SCARD | FOSSEE-Laptop
laptop.fossee.in
GitHub - FOSSEE/FOSSEE-netbook-kernel-source: A low cost fossee-laptop based on wm8880 ARMv7 SoC
A low cost fossee-laptop based on wm8880 ARMv7 SoC - GitHub - FOSSEE/FOSSEE-netbook-kernel-source: A low cost fossee-laptop based on wm8880 ARMv7 SoC
github.com
Hello Folks,
I am searching Testers for DIOS 12.1 My new upcoming Xperia exclusive OS.
Things that don't work actually on Sagami Boards due to the Xperia Software Binaries:
-Mobile Data
-Wifi
-NFC
-Battery Status (No Infos)
Make sure You know what You do. Flash the OEM Software binaries to use this AOSP/SODP based ROM. Flash all Images included in My ZIPs. OTAs can be applied over ADB and Recovery after You have flashed My Kernels/Recoveries. Feel free to ask Me out if You have Questions and consider Joining Me on Social Media or Discord to stay up-to-date.
Sign in - Google Accounts
Device Trees & Kernel: https://github.com/sonyxperiadev/local_manifests
Hi OP, since you are the original developer for this ROM, I changed the tag from General to Development.
Also, because you are posting this ROM yourself, could you please also post a link to kernel source repo? As on XDA we need to comply with GPL v2 which requires kernel source to be open source.
Thank you very much.
jerryhou85 said:
Hi OP, since you are the original developer for this ROM, I changed the tag from General to Development.
Also, because you are posting this ROM yourself, could you please also post a link to kernel source repo? As on XDA we need to comply with GPL v2 which requires kernel source to be open source.
Thank you very much.
Click to expand...
Click to collapse
Thanks for the Help! Since i am using the SODP Device Trees are we going with Pre-Compiled Kernels from the SODP for now.
Source will be added to the first Post! https://github.com/sonyxperiadev/local_manifests