So I have already flashed this ROM by following the procedures asked by the DEV. I used TWRP insted of CWM as it was recommended but for some odd reason whenever I do choose to install what I want instead of the DEV's picks, it doesn't let me get out of boot. It seems that it gets stuck on a boot loop after the reboot and the installation.
The boot seems to last longer than the 10 - 15 min the DEV has listed. It even goes up to 30 minutes.
Does anyone know what the problem? Should I wait for the boot even if it passes well over 45 minutes? :/
And I wipe my system the exact way on recovery mode which is why I'm wondering why it gets stuck on a loop after installation reboot.
I have tried the DEV's pick and it is amazing but I do want to try other things as well. I am running the hyperdrive rom (dev's pick installation) right now.
Related
Its fixed. It seems that it was stuck and just needed that extra kick with another ROM. Not really sure what the hell happened but its working fine now.
Please delete post.
Yesterday I plugged the HOS into my laptop and it started to act a little weird. It wouldn't show the SDcard but it allowed me to open it. I copied a new ROM to it and installed it. Since I did this, the phone will not work. Once it boots, it just freezes and reboots when I try and do anything. The nand allows me to boot and scroll through the home screens, but if I try and do anything else it freezes and reboots. I can't install any other ROM that's not sense base like AOKP or MIUI as they just boot loop. I can get to recovery and the boot loader no problem.
Update: I can boot a stock nand and get into the app drawer. But, once I click on an app or pull down the notification bar it freezes.
Update 2: Was able to get the cyan alpha to install after a good 5 minutes of bootloops and it runs perfect. WTF is going on here?? haha
Can anyone give me any suggestions to try? Thanks for any help that you can provide me.
Hello,
I have an LY-F1 AllWinner A10 tablet.
I installed CWM (using this thread - http://forum.xda-developers.com/showthread.php?t=2189640) and used the reboot-recovery.sh in order to access the recovery screen where I did a full wipe and also wiped the dalvik cache.
I installed cm9, gapps and the lyf1 compatibility zip (from here - http://forum.xda-developers.com/showthread.php?t=1760929), rebooted and everything was working fine.
I did the same again for cm10 (from here - http://forum.xda-developers.com/showthread.php?t=1821398), rebooted and was presented with the spinning cm10 logo. It never gets past this stage, I have left it for 15-20 mins on a couple of occasions.
My plan then was to reflash cm9, but I am unable to get into fastboot mode, download mode, cwm or anything other than the spinning CM logo.
I looked at other similar threads, but couldn't find anything useful.
I appreciate any replies.
Thanks,
David.
similar problem
Does your device have "s off". I waited for almost 4 hours for my HTC eris to boot Evervol, but it still would not boot.
jbaker22 said:
Does your device have "s off". I waited for almost 4 hours for my HTC eris to boot Evervol, but it still would not boot.
Click to expand...
Click to collapse
It may well have been, I'm not sure.
Pretty sure it's fit for the bin now, should have checked i could access cwm with buttons instead of using the reboot script.
Or left CM9 on it... - hindsight is a great thing!
I cannot get a ROM to stick, after one reboot it gets stuck on the boot logo. I have looked through all of the forums and have done this step by step. I have an unlocked bootloader. RSD lite back to stock with success, then root, then install latest TWRP. Nandroid backup then format data, then install ROM. When I reboot it gets stuck on boot logo. This happened ever since I installed CM 10.2, but I really want to install another ROM. I am not sure there is anything else I can do. Can anyone help me?
Nevermind, all is well, the first boot just took 15 minutes or so, which seems a bit long but fixed nevertheless.
There's a fsck (disk check) process that runs and sometimes takes quite a long time. Many have had this issue, patience is a virtue. So are proper thread titles...
Hi guys hope you are having a nice sunday.
I am facing a quite annoying issue after flashing Nethunter on my Oneplus One: every time I boot the phone, the device gets stuck for about 6/7 minutes on the 1+ logo, then the animation appears for few seconds before it finally boots.
I have had this issue with stock CM12.1+Nethunter 3 for OPO CM12.1, and now I am having it with a CM13 nightly + a custom Nethunter that works on CM13. In both cases the device boots up in seconds until flashing nethunter.
I did try to reflash once again (just in case) and I still have the same problem.
Scenario:
Wipe the whole device
Flash CM13 (or 12.1)
Flash Gapps
Reboot and configure android
Reboot again to test boot speed - it boots up super fast
Go to recovery again and flash Nethunter
Wipe dalvik+cache
Reboot
From now on it takes 6/7 minutes to boot
Liveboot Log (only appears during kali animation though, not sue it's logging what happens during the kernel logo):
txt log file > drive.google.com/file/d/0B7y82quVQHh6elliMmFXdUJFSjQ/view?usp=sharing
virus check > virustotal.com/it/url/60a0f8536b0053f104a5d8dcf06a8cc27f89736d0fd915572b75790e12cad031/analysis/1456660030/
Tried with many versions of TWRP (from 2.6 to 3.0.1), nothing. Also, when I boot into recovery, I see the recovery logo for about 5 minutes before I can actually get into the recovery.
I hope someone has got an idea about how to fix this, as you can understand it's very frustrating having a phone that takes half of a big bang theory episode to boot.
Let me know if I can provide more info about my device!
Thanks a lot.
pLx_ said:
Hi guys hope you are having a nice sunday.
I am facing a quite annoying issue after flashing Nethunter on my Oneplus One: every time I boot the phone, the device gets stuck for about 6/7 minutes on the 1+ logo, then the animation appears for few seconds before it finally boots.
I have had this issue with stock CM12.1+Nethunter 3 for OPO CM12.1, and now I am having it with a CM13 nightly + a custom Nethunter that works on CM13. In both cases the device boots up in seconds until flashing nethunter.
I did try to reflash once again (just in case) and I still have the same problem.
Scenario:
Wipe the whole device
Flash CM13 (or 12.1)
Flash Gapps
Reboot and configure android
Reboot again to test boot speed - it boots up super fast
Go to recovery again and flash Nethunter
Wipe dalvik+cache
Reboot
From now on it takes 6/7 minutes to boot
Liveboot Log (only appears during kali animation though, not sue it's logging what happens during the kernel logo):
txt log file > drive.google.com/file/d/0B7y82quVQHh6elliMmFXdUJFSjQ/view?usp=sharing
virus check > virustotal.com/it/url/60a0f8536b0053f104a5d8dcf06a8cc27f89736d0fd915572b75790e12cad031/analysis/1456660030/
Tried with many versions of TWRP (from 2.6 to 3.0.1), nothing. Also, when I boot into recovery, I see the recovery logo for about 5 minutes before I can actually get into the recovery.
I hope someone has got an idea about how to fix this, as you can understand it's very frustrating having a phone that takes half of a big bang theory episode to boot.
Let me know if I can provide more info about my device!
Thanks a lot.
Click to expand...
Click to collapse
My 2013 nexus 7 hangs on the google logo for about 5 minutes as well so I guess it's normal :/
What are the main purposes of NetHunter? It seems like it's some kind of counter offensive security tool or some network backdoor discovery tool. I've never heard of this before.
@noahvt it is not normal, I have tried to reproduce the same situation on a friend of mine's device which is exactly the same as mine, same baseband, same kernel, same nightly rom, same file for Nethunter, an exact copy of my phone. His phone boots in seconds.. It's not normal, especially when boot to recovery it shouldnt hang for 5 minutes on the recovery logo.
-
@SirSoviet
https://www.offensive-security.com/kali-linux-nethunter-download/
Nethunter is basically a Kali Linux port for Android, which allows you to pentest your network. A bit of googling will give you more info about it.
pLx_ said:
@noahvt it is not normal, I have tried to reproduce the same situation on a friend of mine's device which is exactly the same as mine, same baseband, same kernel, same nightly rom, same file for Nethunter, an exact copy of my phone. His phone boots in seconds.. It's not normal, especially when boot to recovery it shouldnt hang for 5 minutes on the recovery logo.
-
@SirSoviet
https://www.offensive-security.com/kali-linux-nethunter-download/
Nethunter is basically a Kali Linux port for Android, which allows you to pentest your network. A bit of googling will give you more info about it.
Click to expand...
Click to collapse
Just built my own version of it and it boots slow as well on my one+ so don't know what's wrong :/
I have the same issues also, the main OS feels pretty unstable (had it freeze on me twice and had to hard reboot it), gonna try a different base maybe Calkulin's or a previous CM 12.1 build.
nfusion77 said:
I have the same issues also, the main OS feels pretty unstable (had it freeze on me twice and had to hard reboot it), gonna try a different base maybe Calkulin's or a previous CM 12.1 build.
Click to expand...
Click to collapse
I wish you good luck, though I've tried both CM12.1 and CM13 and unfortunately had the same issue. Hope it will do the trick for you!
hello pLx_, i got same trouble, but i install patch "kernel-nethunter-flocm-marshmallow-3.1.0" from "https://idlekernel [dot] com/nethunter/nightly/" (flocm, not flo!) and its works fine.
hope it will help you.
I have an original Nvidia tablet which hasn't been killed by the kill switch yet. So I unlocked the bootloader, installed TWRP into recovery and installed Lineage and some other ROMs. But all ROMs are stuck in the boot process when it shows the NVIDIA logo. Any ideas what could be wrong? Did I miss something for the installation process?
First boot can take ~10min, how long did you wait?
pietras83 said:
First boot can take ~10min, how long did you wait?
Click to expand...
Click to collapse
I was waiting more than 10 minutes. I guess it must be something different. I am not sure what I did do wrong.
Hello there ! I'm in the same situation here...
Try to update my rom with a new one. (rooted my shield during the killswitch event)
What i did : update the recovery, dl a rom and open gapps. Then instal them with the nomoreota.zip
(i did not perform a factory reset before...)
I waited the 10 minutes and was still on the nvidia logo.
So... Back to recovery : factory reset, wipe cache, data...
Abd push new roms and opengapps and still stuck on the logo (i wait the 10 minutes everytime)
If anyone have a solution, it would be great
Vincent
Just to let you know that the post" [HELP] return to stock by manigault" help me to re instal my shield tablet. So if anyone have an issue like this, try this post.
Beware, if no back up, all your data will be lost.
Vincent
- edit -
Now I have the boot loop while charging... :crying:
Meaning that when I charge my phone, it reboot autom. and... We're stuck...