hi folks i have a little problem with my phone when i start a game example angry birds the phone freeze unexpectly sometimes fc or sometimes just reboot some aplications have the same behavior..... and some are smooth without problems.... my rom is ParanoidAndroid 3.57 i installed with twrp .... wiping cache dalvilk... system... etc..... installed rom and gaaps.... i coming from embryo rom and everything runs fine.... but i switched because i like the halo notificacion system.... any help will be apreciated.... sorry for my bad english.... and thanks
sometimes just give a system ui error
Sounds like a corrupt flash. Odin stock, factory reset, flash twrp flash pa. Problem solved
almost solved
thanks problem is almost solved.... i do stock, flash twrp... and flash ROM again from scratch everithing seems smooth.... but i have a last question... do you know is this ROM have the memory leak issue cause in the original thread there is no info about that? or missing read changelog? jejejee thanks again....
ppluchesfdk99 said:
thanks problem is almost solved.... i do stock, flash twrp... and flash ROM again from scratch everithing seems smooth.... but i have a last question... do you know is this ROM have the memory leak issue cause in the original thread there is no info about that? or missing read changelog? jejejee thanks again....
Click to expand...
Click to collapse
Havent you experienced the unresponsive bottom in most of the apps ? or sometime with the home screen itself ? I tried it and went back to CM10.1 RC5. I would suggest wait for the issues to be resolved, looks like this rom is in nascent stages...
ashokmani said:
Havent you experienced the unresponsive bottom in most of the apps ? or sometime with the home screen itself ? I tried it and went back to CM10.1 RC5. I would suggest wait for the issues to be resolved, looks like this rom is in nascent stages...
Click to expand...
Click to collapse
Usually that problem is because the Pie trigger is on the bottom edge of the screen. Move the trigger and you should be fine.
ashokmani said:
Havent you experienced the unresponsive bottom in most of the apps ? or sometime with the home screen itself ? I tried it and went back to CM10.1 RC5. I would suggest wait for the issues to be resolved, looks like this rom is in nascent stages...
Click to expand...
Click to collapse
Move the pie trigger.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
yeah... only move pie location
ashokmani said:
Havent you experienced the unresponsive bottom in most of the apps ? or sometime with the home screen itself ? I tried it and went back to CM10.1 RC5. I would suggest wait for the issues to be resolved, looks like this rom is in nascent stages...
Click to expand...
Click to collapse
yes i have experience such problem too but the solution is to move pie location and issue is gone.... like is posted before.... the rom itself is a awesome work.... but as always there is a little bugs.... even stock roms have branches or bugs....
mrfeuss said:
Usually that problem is because the Pie trigger is on the bottom edge of the screen. Move the trigger and you should be fine.
Click to expand...
Click to collapse
xcrazydx said:
Move the pie trigger.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
ppluchesfdk99 said:
yes i have experience such problem too but the solution is to move pie location and issue is gone.... like is posted before.... the rom itself is a awesome work.... but as always there is a little bugs.... even stock roms have branches or bugs....
Click to expand...
Click to collapse
Thank you guys.. it works fine now... But I have moved over to beanstalk rom, which has the HALO incorporated.. loving it.
Related
So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
bboygmoney said:
So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
Click to expand...
Click to collapse
ditto, this happend with my Paranoidandroid install as well. kernel allowed me to stay running without crash, but wifi is a pretty big letdown...
unfortunatly, without the kernel itself being fixed, or the wifi module fixed, we are stuck looking for another alternate kernel... oh yeah, we are pretty limited.
thanks
appreciate the quick reply man. And I'll be keeping my eye out then
bboygmoney said:
appreciate the quick reply man. And I'll be keeping my eye out then
Click to expand...
Click to collapse
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
bboygmoney said:
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
Click to expand...
Click to collapse
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
dakunesu said:
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
Click to expand...
Click to collapse
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
problem solved!
bboygmoney said:
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
Click to expand...
Click to collapse
The ROM was updated and the kernel included in the update! Amazing rom , highly recommended especially with the updated kernel!
It's my first time to actually take the plunge and install a custom ROM and I seem to have encountered a problem. I followed the instructions to install RemICS ROM and initially everything went well. I turn on the device and everything seems to work except for the preinstalled MX Player and Apollo. That won't be a problem since maybe I could download replacements. The problem comes with locking the screen. I press on the lock button and the screen turns off. However, pressing the lock or home button does not turn on the screen, and the device proceeds to just heat up and use battery. I've tried returning to the stock ROMs and there seems to be no problem. Just with RemICS. Note though that I am not using 5.7.2 RemICS since it cant be downloaded for bandwidth reasons, I'm on 5.7.1. Thank you!
chanchan05 said:
It's my first time to actually take the plunge and install a custom ROM and I seem to have encountered a problem. I followed the instructions to install RemICS ROM and initially everything went well. I turn on the device and everything seems to work except for the preinstalled MX Player and Apollo. That won't be a problem since maybe I could download replacements. The problem comes with locking the screen. I press on the lock button and the screen turns off. However, pressing the lock or home button does not turn on the screen, and the device proceeds to just heat up and use battery. I've tried returning to the stock ROMs and there seems to be no problem. Just with RemICS. Note though that I am not using 5.7.2 RemICS since it cant be downloaded for bandwidth reasons, I'm on 5.7.1. Thank you!
Click to expand...
Click to collapse
i think 5.7 or 5.6 or 5.2 the most stable till now ,
and All 5.x.x is not for everyday use it's just to testing new Mod's ,
i now use 5.2 And every think is ok and good ...
i will build new rom with next alpha6 with HW fixing ....
this bug you talk about is from new Tweaks i think it's too much so i remove the big one
abderrezak said:
i think 5.7 or 5.6 or 5.2 the most stable till now ,
and All 5.x.x is not for everyday use it's just to testing new Mod's ,
i now use 5.2 And every think is ok and good ...
i will build new rom with next alpha6 with HW fixing ....
this bug you talk about is from new Tweaks i think it's too much so i remove the big one
Click to expand...
Click to collapse
Thanks for your reply. I'm downloading the 5.7 ROM now. Will the same TouchWiz and GApps files I downloaded with the 5.7.1 ROM work here? Also, is my understanding correct that I first install the RemICS zip (199MB), then install the Fix-RemICS-A4-A5 zip (25MB), then the FixSU zip in that order?
chanchan05 said:
Thanks for your reply. I'm downloading the 5.7 ROM now. Will the same TouchWiz and GApps files I downloaded with the 5.7.1 ROM work here? Also, is my understanding correct that I first install the RemICS zip (199MB), then install the Fix-RemICS-A4-A5 zip (25MB), then the FixSU zip in that order?
Click to expand...
Click to collapse
Exactly ,
abderrezak said:
Exactly ,
Click to expand...
Click to collapse
Awesome! Thanks a lot! :good:
install new 5.7.8 version
AndreRaptor said:
install new 5.7.8 version
Click to expand...
Click to collapse
My sister is using the phone now which I flashed back to DDLF2 because she had no phone to use. I'll see to it when she gets a new one. I'm using an S3mini now.
Sent from my GT-P6200 using xda app-developers app
cus i can not post in the "development " so I'd like to feedback here and hope someone can feedback for me
1st, It's strange, if you set ur language to english the rom's system ui will be fine , but if you set it as chinese or others, it will be system ui FC
2nd, is it possible to add an option to show the carrier label in the status bar ? some one may keen on it ~
PAC-man ROM q&a thread:
http://forum.xda-developers.com/showthread.php?t=2261080
Brought to you by time and relative dimensions in space.
feedback
i tried the rom by ravikirancg. kudos for his efforts.
this is not much asked here(not allowed to ask!). but if there are really techy ppl who try new roms. which is the most stable rom for atrix 2 in jelly bean series preferably 4.3
deepakanto said:
i tried the rom by ravikirancg. kudos for his efforts.
this is not much asked here(not allowed to ask!). but if there are really techy ppl who try new roms. which is the most stable rom for atrix 2 in jelly bean series preferably 4.3
Click to expand...
Click to collapse
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Ravikirancg said:
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
can you work on increasing the battery life of the 4.3 pac im running the new 1.0 kernel jbx but still the roms using up a lot of battery
underclocking and tweaking the governors seem to help a little but i think the kexec drawing a lot of power.
btw gr8 work on the rom integration of cm pa and aokp
saw ur github nice wrk.........:good:
---------- Post added at 05:32 PM ---------- Previous post was at 05:23 PM ----------
Ravikirancg said:
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
i second tht opinion but pa seems to have less battery consumption and with the gapps included into the rom it seems to be quite stable.
but if you want to tweak around with your cpu cm should do the trick.
Agree
Ravikirancg said:
CyanogenMod will be, by far, the most stable.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Me too. But i found that 4.3 pacman has less battery drain. The cm 4.3 is a real toaster. the devices heats up for no reason sometimes. Ravi bhai kabhi milo to sahi. Personally dhanyavad karna chahenge aapko currently on pacman 4.3 . Also curious what MIUI v6 might bring....!!
feedback!
hey, so I just noticed a few things, any fixes?
- the lock screen doesnt work (doesnt show up), even after setting up a pin or pattern, locking the phone via power button doesnt work, and its set to immediately lock as well. any idea?
- got the gapps for 4.3 installed..but it didnt come with a play store.. so i figure i install my own.. tried multiple versions just in case, even the latest for 4.3 and it just says no connection, I am connected to wifi and there is internet via firefox and gmail recieves emails as well, the stock browser just fc's but dont matter. any idea?
just need these two and its a perfect build for me, great workk!!
kk so running the 4.3 pacman by Ravikirancg on att atrix 2 with bmm on system 3..tried multiple reboots,tried clearing cache and dalvikca already to no avail.
thanks
dcutz said:
hey, so I just noticed a few things, any fixes?
- the lock screen doesnt work (doesnt show up), even after setting up a pin or pattern, locking the phone via power button doesnt work, and its set to immediately lock as well. any idea?
- got the gapps for 4.3 installed..but it didnt come with a play store.. so i figure i install my own.. tried multiple versions just in case, even the latest for 4.3 and it just says no connection, I am connected to wifi and there is internet via firefox and gmail recieves emails as well, the stock browser just fc's but dont matter. any idea?
just need these two and its a perfect build for me, great workk!!
kk so running the 4.3 pacman by Ravikirancg on att atrix 2 with bmm on system 3..tried multiple reboots,tried clearing cache and dalvikca already to no avail.
thanks
Click to expand...
Click to collapse
the ROM works perfectly for me. i install the ROM in system 1 is my daily use now and is amazing
rivas1981 said:
the ROM works perfectly for me. i install the ROM in system 1 is my daily use now and is amazing
Click to expand...
Click to collapse
Play store and all?? Hmm.. Maybe I need to do a bigger system folder, possible reason for the features being left out? Gonna try on system 4, nd See if that helps.
Sent from my MB865 using xda app-developers app
Giving a bigger system partition made everything work.. But now continuous system ui has stopped working :/ really??
dcutz said:
Play store and all?? Hmm.. Maybe I need to do a bigger system folder, possible reason for the features being left out? Gonna try on system 4, nd See if that helps.
Sent from my MB865 using xda app-developers app
Giving a bigger system partition made everything work.. But now continuous system ui has stopped working :/ really??
Click to expand...
Click to collapse
Maybe a bad download and/or a bad flash.(?) I haven't had any of the issues you're reporting, and haven't seen others reporting the same so it is likely something on your end. Just redownload and reflash and see if that helps.:thumbup:
Brought to you by time and relative dimensions in space.
awesome
1BadWolf said:
Maybe a bad download and/or a bad flash.(?) I haven't had any of the issues you're reporting, and haven't seen others reporting the same so it is likely something on your end. Just redownload and reflash and see if that helps.:thumbup:
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
kk got the latest nightly..works like a charm! perfect build now!
thanks
Lastess nigthly builds
Hi, the pac rom is very stable and fast, i use the nightly 23.
But, i have a bug to repport wen usb headset is connected, and recive or do a call if you don't hang before the other person hangs the phone is blocked and restart a little secs after.
Second with the lastes builds 26, 25 or 24 the wifi is not working. I test restarting, with wifical.sh, a fresh install (4.0.4 or 4.1.2) motorola roms flashed with rsd, i tried to install the 23 over 26 rom and wifi didin't start.
hello, i love my galaxy s3 and even more because i took the leap and rotted and I am running on roms. My favorite rom is cyanogenmod but I have never gotten the camera to work on it with anything greater than cm10.0. I am currently running AOKP which allows the camera to work which is awesome too but i would love to go back to CM. I have searched for hours but never found a solution that worked. I tried flashing a file that some around this forum and other forums have said fixed the CM camera issue but that did not help. If anyone know of a fix so i could use CM10.1 or CM 10.2 I would be greatly appreciated. Thank you for your time.
Have you tried a clean install of CM 10.2? I haven't had any issues with my camera running any custom rom.
Does it work at all, or are you just missing some feature?
esjames said:
Have you tried a clean install of CM 10.2? I haven't had any issues with my camera running any custom rom.
Does it work at all, or are you just missing some feature?
Click to expand...
Click to collapse
I have not tried a clean install. I will try that when I get a chance. The camera sometime opens and I can zoom in and out a few seconds but then it freezes and the phone restarted. Also, other times the camera open to a black screen and freezes and the phone restarts. It really sucks This is the only issue I am having with CM and why I switched to another rom.
Doing a clean install fixed the problem. Thank you so much for your help. I would like to mark this thread as SOLVED but i do not know how. Hopefully an admin can do this.
godfather17 said:
Doing a clean install fixed the problem. Thank you so much for your help. I would like to mark this thread as SOLVED but i do not know how. Hopefully an admin can do this.
Click to expand...
Click to collapse
Just press your first post and modify it. Glad you fixed your issue.
I'm waiting for Android Milky Way
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
well dude cm11 is not yet that smooth .. u have to wait .. im also not using cm11, the most smoothest rom till now is CM10 (4.1.2 JB)
mrroks said:
well dude cm11 is not yet that smooth .. u have to wait .. im also not using cm11, the most smoothest rom till now is CM10 (4.1.2 JB)
Click to expand...
Click to collapse
So there's no date yet for the new CM for pico or i'll have to switch to 10 for a smooth phone?
smokealbertobi said:
So there's no date yet for the new CM for pico or i'll have to switch to 10 for a smooth phone?
Click to expand...
Click to collapse
yeah if u want a JB .. otherwise CM9 (4.0.4 ICS) is also very smooth ...
em still waiting for smooth CM11
mrroks said:
yeah if u want a JB .. otherwise CM9 (4.0.4 ICS) is also very smooth ...
em still waiting for smooth CM11
Click to expand...
Click to collapse
Also do you have any problems on your screen? Minse i think isn't calibrated any help?
smokealbertobi said:
Also do you have any problems on your screen? Minse i think isn't calibrated any help?
Click to expand...
Click to collapse
what do u mean by that ?
mrroks said:
what do u mean by that ?
Click to expand...
Click to collapse
well my screen is a little bit wanky when i try to tipe "b" it goes to "n" or "v" and i cant really type very well
smokealbertobi said:
well my screen is a little bit wanky when i try to tipe "b" it goes to "n" or "v" and i cant really type very well
Click to expand...
Click to collapse
well according to me its 90% problem with your touch screen so its hardware related issue ... but first try changing the rom if the problem persists then its hardware according to me Sorrie
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
No, its not the problem of CM11 because im already using since 1Month, its really butter smooth and im using IN2EXT script for internal memory
i think its your touch related problem any way first switch to another rom like [Truimph HD V2 Black Pegasus not V3] and CM10 4.1.2 or any HTC Sense 4.0 ICS Roms after that if same problem persists then contact htc service centre
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
@smokealbertobi
Flash This:
http://forum.xda-developers.com/gal...s/mod-pureperformancesx-zeno-edition-t2360985
Direct link:
http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
If I help you,
Don't miss Thanks
You can try omni ROM 4.4.2 nightly.
Sent from my Explorer A310e using XDA Free mobile app
muraari4u said:
No, its not the problem of CM11 because im already using since 1Month, its really butter smooth and im using IN2EXT script for internal memory
i think its your touch related problem any way first switch to another rom like [Truimph HD V2 Black Pegasus not V3] and CM10 4.1.2 or any HTC Sense 4.0 ICS Roms after that if same problem persists then contact htc service centre
Click to expand...
Click to collapse
Yeah its not that....
Abhaysinh said:
@smokealbertobi
Flash This:
http://forum.xda-developers.com/gal...s/mod-pureperformancesx-zeno-edition-t2360985
Direct link:
http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
If I help you,
Don't miss Thanks
Click to expand...
Click to collapse
Ok so i tried this thing and it goes a little faster and all
Did you installed it?
smokealbertobi said:
Hi i recently flashed my phone with CM11 and aumented the internal memory but now my phone is all laggy and it takes like 30 sec to open the most basics apps in my phone i tried installing a kernel but i can't find any for android 4.4.2, also my screen is not calibrated or something it really takes an effort on writing a simple message.
Any help? Have you been having isues with your pico?
Thanks
Click to expand...
Click to collapse
Hey bro try increasing ram so that your phone wont b laggy . Here : http://forum.xda-developers.com/showthread.php?t=2735281 :thumbup:
It worked for me . I hope it will hep u too .
Plz hit thanks button if this helps for u .
Sent from my Explorer A310e using XDA Premium 4 mobile app
Use cm11 weekly build #5. It's bloody smooth. Faster than cm9 or 10
sent from my htc explorer - cm11 weekly build #5
Try nand recovery and reinstall the ROM , I faced similar issues myself.