Related
Hey all. Im currently running 1.85 and im trying to update. I downloaded the 2.20 RUU from HTC, as well as the latest Sync Manager and Drivers. I put the phone in Fastboot USB and go to run the RUU. It starts to update but then randomly fails and I have to recover each time. Any idears?
if your bootloader was unlocked did you run "fastboot oem lock"
DvineLord said:
if your bootloader was unlocked did you run "fastboot oem lock"
Click to expand...
Click to collapse
Yes it is and no I didn't. What is it?
its the only way you will be able to ruu. so run the command then run the ruu.
DvineLord said:
its the only way you will be able to ruu. so run the command then run the ruu.
Click to expand...
Click to collapse
I'm not familiar with how to do that. Is there a tutorial?
fastboot oem lock
run the ruu exe
???
profit
synn21588 said:
I'm not familiar with how to do that. Is there a tutorial?
Click to expand...
Click to collapse
all the resources available to the hox are here http://forum.xda-developers.com/showthread.php?t=1671237
Why on earth would you want to run the 2.20 RUU? It will update the hboot, which plugs the hole by which kernels can be flashed from the recovery. You will need to push the boot.img separately via fastboot every time you flash a ROM (or other alternate methods).
If you just want the stock 2.20 firmware, install the stock pre-rooted 2.20 ROM avaiable from Development. Or a more updated on, since there are stock pre-rooted ROMs available up to 2.42 now. If you want the newer radios, those are posted in Development as well.
redpoint73 said:
Why on earth would you want to run the 2.20 RUU? It will update the hboot, which plugs the hole by which kernels can be flashed from the recovery. You will need to push the boot.img separately via fastboot every time you flash a ROM (or other alternate methods).
If you just want the stock 2.20 firmware, install the stock pre-rooted 2.20 ROM avaiable from Development. Or a more updated on, since there are stock pre-rooted ROMs available up to 2.42 now. If you want the newer radios, those are posted in Development as well.
Click to expand...
Click to collapse
So I can just flash the latest ROMs without updating to the latest firmware? I already unlocked my boot loader and have TWRP installed
synn21588 said:
So I can just flash the latest ROMs without updating to the latest firmware? I already unlocked my boot loader and have TWRP installed
Click to expand...
Click to collapse
Yes. Flash away.
redpoint73 said:
Yes. Flash away.
Click to expand...
Click to collapse
Sweet. Thanks
Help please. I am running Htc one x 2.20 rooted. I Installed a back up of the factory rom of 2.2.0 and relocked the device to use RUU to get it back to stock and i Followed the Program instructions, but it fails and I don't know if it is because I am running the same version or what I need to get it back to stock. I ended up making it say security warning but when i booted back in to the bootloader the security warning is gone.
You run the ruu in fastboot after running "fastboot oem lock"
DvineLord said:
You run the ruu in fastboot after running "fastboot oem lock"
Click to expand...
Click to collapse
Thanks a lot. Also Think fire wall and anti virus program may have had problems as I just thought of that this morning.
Hi, I have a HTC ONE XL for AT&T with S-OFF and unlocked bootloader. I have the nocturnal ROM based on ICS. Also HBOOT 1.01.0000.
I want to install a rom based on JB (This particular CleanROM 6.5 - ★ | Jellybean 4.1.1! |).
My question is with this hboot, can i flash a jb rom from ICS? Because I'm not sure if flash from recovery the zip of this rom bricked me.
It won't brick you. I'm not sure if you'll experience issues using such an old firmware with a ROM based on the latest softwate
Sent from my One X using xda app-developers app
Thanks. Is there any way to update the software?
Rafanjani said:
Thanks. Is there any way to update the software?
Click to expand...
Click to collapse
Yes install the Ruu, then push twrp, then install CR. This will give you the latest firmware. CR by itself does not so it, and some gave experienced random reboots with older wifi firmware. Just be aware that a small subset of HOXL phones do not work well with Maps/nav under JB
between ynelsol
GroovyGeek said:
Yes install the Ruu, then push twrp, then install CR. This will give you the latest firmware. CR by itself does not so it, and some gave experienced random reboots with older wifi firmware. Just be aware that a small subset of HOXL phones do not work well with Maps/nav under JB
Click to expand...
Click to collapse
thanks for reply! I did brick my phone when i try to install an official ruu 2 months ago, but i did fix this ($$$$). The problem is that I can not install because I have CID 111111 and CR root, bootloader unlocked etc
With s-off you won't brick running an ruu. Though my phone will no longer ruu properly but that's another story. I may post a thread about it in case others experience it so they know how to recover.
Sent from my HTC One X using xda app-developers app
exad said:
Though my phone will no longer ruu properly but that's another story. I may post a thread about it in case others experience it so they know how to recover.
Click to expand...
Click to collapse
I'm curious about this. What happened?
Sent from my HTC One
ECEXCURSION said:
I'm curious about this. What happened?
Sent from my HTC One
Click to expand...
Click to collapse
Something went wrong while RUUing and my hboot partition cannot be written over without clearing the cache first. So the RUU will get to the end and then fail. Everything flashed except the hboot. It's kind of funny because it looks like a brick when it happens but it remains in RUU mode so I can just fastboot flash the hboot seperately after and everything works but RUUs will no longer complete successfully Always half bricks.
How did it happen? Well I think it's because I was RUUing in a VM as I was running linux exclusively at the time. But during RUU the phone looses connection and I have to manually reconnect to my phone and I didn't realize so it interrupted the RUU. I'm just lucky I didn't end up with a full brick! ^_^
exad said:
Something went wrong while RUUing and my hboot partition cannot be written over without clearing the cache first. So the RUU will get to the end and then fail. Everything flashed except the hboot. It's kind of funny because it looks like a brick when it happens but it remains in RUU mode so I can just fastboot flash the hboot seperately after and everything works but RUUs will no longer complete successfully Always half bricks.
How did it happen? Well I think it's because I was RUUing in a VM as I was running linux exclusively at the time. But during RUU the phone looses connection and I have to manually reconnect to my phone and I didn't realize so it interrupted the RUU. I'm just lucky I didn't end up with a full brick! ^_^
Click to expand...
Click to collapse
how i can flash hboot using fastboot? I wish to have jb
Rafanjani said:
how i can flash hboot using fastboot? I wish to have jb
Click to expand...
Click to collapse
flashing hboot with fastboot won't give you JB......
Is your phone S-ON or S-OFF?
SuperCID? Yes or no?
Bootloader locked or unlocked?
exad said:
flashing hboot with fastboot won't give you JB......
Is your phone S-ON or S-OFF?
SuperCID? Yes or no?
Bootloader locked or unlocked?
Click to expand...
Click to collapse
I know! but it's the first step to upgrade to jb
Rafanjani said:
I know! but it's the first step to upgrade to jb
Click to expand...
Click to collapse
No it isn't
Hi everyone,
This is my very first post and I'll admit I am a NOOB.
As I've searched XDA and Google for my questions, I am really at a loss and thought I would pose my question(s) to the community.
I have a Rogers HTC One X(Evita) running CM 10.0, I am currently S-ON, with TWERP 2.3.1
I would like to install the latest CM but it would seem my HBOOT (1.11) needs to be upgraded.
My first question is if my CID is Roger001 is this similar to being SuperCID?
If so, which firmware is recommended? Which is the latest HBOOT I should upgrade to?
I guess this brings me to my next question, what exactly do I need to be able to upgrade my HBOOT?
I've seen a few walkthroughs but none mention Roger001 as CID and I'd rather not risk bricking my phone.
If you need any other information, please let me know.
Any assistance is greatly appreciated.
You definitely need to update your phone in order to flash the latest cm ROM. But, with your phone in its current state you'll brick it. You don't have SuperCID (11111111), you'll definitely need to get that first, then get s-off, then you can RUU up to the latest. Links to everything you need are in this thread.
Sent from my Evita
Thanks Tim.
I'll give that a whirl and let you know how it turns out.
Another silly question, what exactly is RUU?
Sent from my One X using xda app-developers app
RUU stands for ROM Update Utility. It basically takes your phone back to being completely stock, including recovery. The beauty of being s-off when you run an RUU is the s-off status survives the process, and so will your unlocked bootloader. So all you need to do when it's finished is flash TWRP again via fastboot, then flash your ROM via TWRP.
Sent from my Evita
Ahh
That makes perfect sense!
If I wanted to stay stock, I could?
Sent from my One X using xda app-developers app
Yeah there's nothing stopping you. Then if you change your mind it's as simple as following the steps I mentioned before.
Sent from my Evita
I haven't had a chance to try anything as of yet but I've been doing some reading, could I use the One X Att all-in-one kit 3.0.1 to obtain SuperCID as well S-Off?
I tried another apparently popular program yesterday but it didn't work, as my CID is still Roger001.
Thanks!
Sent from my One X using xda app-developers app
Yeah you might as well try anything you can to get it done.
Sent from my Evita
Yes!
timmaaa said:
Yeah you might as well try anything you can to get it done.
Sent from my Evita
Click to expand...
Click to collapse
Hey timmaa,
Just wanted to say thanks for the help!
I managed to get CID 11111111, as well as S-OFF.
I've just relocked and I am currently downloading the Rogers stock RUU, with that comes HBoot 2.14 and the latest CM!
Thanks again:good::laugh:
Spoke too soon.. :S
asarrecchia said:
Hey timmaa,
Just wanted to say thanks for the help!
I managed to get CID 11111111, as well as S-OFF.
I've just relocked and I am currently downloading the Rogers stock RUU, with that comes HBoot 2.14 and the latest CM!
Thanks again:good::laugh:
Click to expand...
Click to collapse
So, I flashed that latest Rogers RUU using ARUWizard, everything looked to be okay, as now I am now on H-Boot 2.14.
However, I cant boot into anything..
For some reason, when it tries to boot up it shows the CyanogenMod logo when loading but nothing.
Windows recognizes my phone and tries to install new drivers but fails.
I can boot into the bootloader but when I hit recover, the screen goes black and then after awhile a red ! with a phone beneath it shows up.
Any ideas anyone?
asarrecchia said:
So, I flashed that latest Rogers RUU using ARUWizard, everything looked to be okay, as now I am now on H-Boot 2.14.
However, I cant boot into anything..
For some reason, when it tries to boot up it shows the CyanogenMod logo when loading but nothing.
Windows recognizes my phone and tries to install new drivers but fails.
I can boot into the bootloader but when I hit recover, the screen goes black and then after awhile a red ! with a phone beneath it shows up.
Any ideas anyone?
Click to expand...
Click to collapse
Ok, firstly you didn't need to relock your bootloader to run the RUU because you have s-off. And what exactly is aruwizard? And how did you flash CM after you ran the RUU?
Sent from my Evita
timmaaa said:
Ok, firstly you didn't need to relock your bootloader to run the RUU because you have s-off. And what exactly is aruwizard? And how did you flash CM after you ran the RUU?
Sent from my Evita
Click to expand...
Click to collapse
I followed the steps from the link you gave me, under the RUU section, as there was a guide on how to install an RUU for Rogers HTC One X.
It said to relock the phone, so, I did.
ARWizard was part of the guide.
The weird thing is, I didn't flash CM, I flashed the Rogers RUU, so, I'm not even sure how CM10 is even on my phone.
I can get to the Bootloader but I can't launch TWERP and my windows PC now doesn't recognize my phone, it says installing drivers but never does. I had HTC Sync installed in hopes that it would help, it didn't.
Is my only option to do a Factory Reset in Hboot? I've read ill lose all my info on the SD card.
Thanks
Which RUU did you run? Something has gone wrong.
Sent from my Evita
timmaaa said:
Which RUU did you run? Something has gone wrong.
Sent from my Evita
Click to expand...
Click to collapse
I followed the steps in the below thread to help me flash the RUU
http://forum.xda-developers.com/showthread.php?t=1658929&nocache=1
I went to this site to get the Stock image:
http://forum.xda-developers.com/showthread.php?p=37227608
It's 3.17.631.2
OTA_EVITA_UL_JB_45_S_Rogers_WWE_3.17.631.2_0.23a.3 2.09.29_10.128.32.34a_release_299850qstr7rxdbfuofl 6j.zip
I really do appreciate the help, by the way.
I'm not familiar with that method, but it seems to me that it doesn't do a full RUU. And evidently it hasn't because you still have cm on your phone. What hboot version does your phone list in bootloader now? You could just run the at&t 3.18 RUU which will do the whole job. You're s-off so it should be fine.
Sent from my Evita
timmaaa said:
I'm not familiar with that method, but it seems to me that it doesn't do a full RUU. And evidently it hasn't because you still have cm on your phone. What hboot version does your phone list in bootloader now? You could just run the at&t 3.18 RUU which will do the whole job. You're s-off so it should be fine.
Sent from my Evita
Click to expand...
Click to collapse
I am 2.14 HBOOT and S-off.
The problem is that while my Windows PC recognizes my phone, it doesnt load the drivers and therefore, I cant send any ADB commands.
I am not even able to go into TWERP.
How will I be able to run the AT&T if I cant push any ADB commands from my PC?
You don't need any adb commands to run an RUU, but you do need the pc to recognize the phone. I'd try uninstalling all drivers, then installing them again to see if it helps.
Sent from my Evita
Ota is not the same as aruwizard zip. Aru zip is exactly the same as Rom.zip you find inside ruu files, evita ones get the name pj83img.
Not sure why everyone thinks ota is ruu, nowhere is it refered to as being the same thing.
Maybe the firmware.zip in the ota managed to flash though hence your hboot and other firmware was upgraded.
If you follow the "or" method for flashing the zip it actually should work. The better correct answer is once s-off to download/install the latest ruu available that you want and ota up from there.
twistedddx said:
Ota is not the same as aruwizard zip. Aru zip is exactly the same as Rom.zip you find inside ruu files.
Not sure why everyone thinks ota is ruu, nowhere is it refered to as being the same thing.
Maybe the firmware.zip in the ota managed to flash though hence your hboot and other firmware was upgraded.
Click to expand...
Click to collapse
That's what I thought, but if he has used this aru zip, it's had the opposite effect. He now has the upgraded hboot but the previous ROM is still intact.
Sent from my Evita
timmaaa said:
That's what I thought, but if he has used this aru zip, it's had the opposite effect. He now has the upgraded hboot but the previous ROM is still intact.
Sent from my Evita
Click to expand...
Click to collapse
Thanks guys.
I'll try uninstalling the phone drivers and reinstall them, hopefully, it'll allow my PC to see my phone.
Worse case scenario, if my computer doesn't load the drivers for my phone, what are my options?
What if I select factory reset from HBOOT?
I have S4 Ville on firmware 3.14.531.17 and need to know if S-OFF is possible using whatever method available. Moonshine thread states that only 3.14.531.11 (T-MOB) is supported and haven't found any details in the Facepalm thread.
Anyone know for sure?
Bump
Sent from my One S using XDA Premium 4 mobile app
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
tivofool said:
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
Click to expand...
Click to collapse
Well gave this a shot and after 5 hours I am back on CM10.2 with S-ON and latest firmware still.
Thanks for the help though. Cheers.
Anyone else got any idea?
bump
Look for 3.14.531.11. It should be available somewhere. Lock the phone back and RUU it. Then you can unlock again and S-OFF with moonshine.
evrycard said:
Look for 3.14.531.11. It should be available somewhere. Lock the phone back and RUU it. Then you can unlock again and S-OFF with moonshine.
Click to expand...
Click to collapse
He probably cannot downgrade from *.17 to *.11.
I don't know what parts of the firmware moonshine needs. But you could try downgrade using a OTA or Nandroid.
Same here
I'm pretty much stuck with a One-S Bootloader unlocked with S-on.
I can't find a way to get S-Off. Just googling and throwing prayers in the sky someone develops a way.
pyrocide said:
Well gave this a shot and after 5 hours I am back on CM10.2 with S-ON and latest firmware still.
Thanks for the help though. Cheers.
Anyone else got any idea?
Click to expand...
Click to collapse
If that procedure took you 5 hours... Maybe s-off isn't for you.
Sent from my HTC One S using xda app-developers app
havikx said:
If that procedure took you 5 hours... Maybe s-off isn't for you.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
It took me 5 hours total to begin finding all req's and trying the above method, finding it not to work, redoing the RUU *.17 and getting BACK on CM10.2 and having a phone to make calls with. The method above took maybe 20-30 minutes of double checking and making sure i didn't miss something.
Maybe PM this guy. He posted that it moonshine worked on .17.
http://forum.xda-developers.com/showpost.php?p=45955250&postcount=1091
Ask if he ran moonshine on Linux.
tivofool said:
Maybe PM this guy. He posted that it moonshine worked on .17.
http://forum.xda-developers.com/showpost.php?p=45955250&postcount=1091
Ask if he ran moonshine on Linux.
Click to expand...
Click to collapse
PM'd him for more info. Thanks!
So I was having problems getting s-off as well, eventually I got it done, but it was definitely a big trial and error process.
What I ended up doing was:
1) Get the 3.14.531.11 RUU from http://www.androidruu.com/index.php?developer=Ville (make sure you get the TMOUS one) This link is also provided in the first post in the Android development section
2) I ended up using Moonshine S-Off (http://forum.xda-developers.com/showthread.php?t=2325590) but I needed to use it in conjunction with running it on Ubuntu. Luckily I had a spare hard drive lying around. If you don't, I believe you can run it through the CD as well as long your burn the Ubuntu.iso on a disc. Plug in your phone to the computer and let it do its magic
3) From there, if you wanted to, you can change to SuperCID. Since you have s-off by then, you can change it from the fastboot usb in the bootloader with the line fastboot oem writecid 11111111 (double check, i'm just writing off the top of my head)
4) Then install roms and etc through the usual custom recovery
Note. I tried the Maximus HD, yes it was nice, but it didn't allow me to utilize my phone as a hotspot, so I ended up using the Dark Jelly rom instead. So far it's been very nice. The hotspot works, but the tethering portion is still unavailable. Just my two cents.
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
tivofool said:
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
Click to expand...
Click to collapse
i can say that this worked for me as well. i didn't relock bootloader before installing the 3.14.531.11 ruu though. still worked for me. also installed moonshine on windows. ( guess i'm lucky )
bnd10706 said:
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
Click to expand...
Click to collapse
You saved me so much time. Thanks!
bnd10706 said:
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
Click to expand...
Click to collapse
I do not understand meet all the requirement and I run it step by step and still gets stuck in step 3 moonshine I need urgent help, thanks
pyrocide said:
I have S4 Ville on firmware 3.14.531.17 and need to know if S-OFF is possible using whatever method available. Moonshine thread states that only 3.14.531.11 (T-MOB) is supported and haven't found any details in the Facepalm thread.
Anyone know for sure?
Click to expand...
Click to collapse
Test... click here
http://forum.xda-developers.com/showthread.php?t=2569755
[Q]Hboot/Firmware update 2.15 to 2.16 et al.
Sorry wrong thread.
Currently running stock rom version 4.0.3. Software number 1.85.502.3. I have root,supercid,unlocked and s off. Using TWRP 2.6.3.0 recovery. I tried to flash Cyanogen 10.1.3 stable but it gave an error message which contained something referring to 2.14 and I remember reading that you may need to update your hboot for newer roms. so i followed this thread http://forum.xda-developers.com/showthread.php?t=2156686 and updated my hboot to 2.14. After that I can flash Cyanogen but when I reboot the phone gets stuck in a boot loop. I've tried wiping cache, davlik, system etc and it doesn't help. Also extracted the boot.img from the rom zip and pushed it to my phone and that didn't help either. What is the problem? Is there anything else I can try?
Updating the hboot is only part of the requirement for flashing the ROM. If you read the usual instructions in the cm ROM thread it actually says you need to run the 3.18 RUU.
Sent from my Evita
timmaaa said:
Updating the hboot is only part of the requirement for flashing the ROM. If you read the usual instructions in the cm ROM thread it actually says you need to run the 3.18 RUU.
Sent from my Evita
Click to expand...
Click to collapse
Thank you for the reply timmaaa, my brother had the exact same phone and he was running magio rom on it. he used xfactor root exploit and face palm s off. magio rom only requires 2.20 update and I was able to flash cm 10.1 on it and it worked fine. Whats going on there? Anyway so my only option is to run the 3.18 RUU?
I'm not sure what was going on with the other phone, but yes the requirement for either cm10.1 or cm10.2 is to run the 3.18 RUU. You're s-off so the whole process is very easy. Download the RUU, connect your phone in fastboot mode, double click the RUU program on your PC, follow the prompts and that's it. Just make sure no other programs are running and make sure screen saver / hibernation are turned off. It will return your phone to stock but your unlocked bootloader and s-off status will survive the process. You'll just need to flash TWRP recovery again afterwards.
Sent from my Evita
timmaaa said:
I'm not sure what was going on with the other phone, but yes the requirement for either cm10.1 or cm10.2 is to run the 3.18 RUU. You're s-off so the whole process is very easy. Download the RUU, connect your phone in fastboot mode, double click the RUU program on your PC, follow the prompts and that's it. Just make sure no other programs are running and make sure screen saver / hibernation are turned off. It will return your phone to stock but your unlocked bootloader and s-off status will survive the process. You'll just need to flash TWRP recovery again afterwards.
Sent from my Evita
Click to expand...
Click to collapse
just to confirm is this the file i need
RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial.exe
lujosh87 said:
just to confirm is this the file i need
RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial.exe
Click to expand...
Click to collapse
That's the one
exad said:
That's the one
Click to expand...
Click to collapse
worked like a charm. you are the man. thank you.
timmaaa said:
I'm not sure what was going on with the other phone, but yes the requirement for either cm10.1 or cm10.2 is to run the 3.18 RUU. You're s-off so the whole process is very easy. Download the RUU, connect your phone in fastboot mode, double click the RUU program on your PC, follow the prompts and that's it. Just make sure no other programs are running and make sure screen saver / hibernation are turned off. It will return your phone to stock but your unlocked bootloader and s-off status will survive the process. You'll just need to flash TWRP recovery again afterwards.
Sent from my Evita
Click to expand...
Click to collapse
Thank you too timmaaa.
No problem.
Sent from my Evita