Good day all I have a Problem that I can not resolve or I am doing something wrong. I had a Sony Play before and flashing Rom on it was a breeze, but i have got myself a lg Optimus 3D and seem to be difficult. When I am on a rooted gingerbread Rom with cwm touch installed everything is working. My Sim card is working and I have no random shutdowns. I have installed a couple of Roms on my phone and all have the same problem. What I have installed is the Walkman Rom, Miui v5 3.6.7 and Miui v5 3.3.29. All have the same problem . When I did is a factory reset,clear cache and install Rom everything works. When I load up the newly installed Rom I have random reboots and my Sim is not detected. About 5 minutes into using Rom it freezes for about 5 seconds then the screen turns black and to get it back on I have to do a battery pull. I have tried with ICS Rom but get boot loop. Can someone help me with this issue that I am have problems with. Thanks for you time.
Chrisdzie
http://forum.xda-developers.com/showthread.php?t=2195753
aldrinmcmie said:
http://forum.xda-developers.com/showthread.php?t=2195753
Click to expand...
Click to collapse
OK thanks for the ics tutorial very helpful. But don't mean to sound like a newbie but how can i solve the problem with my installed custom Roms not working?? Or will this work to with customs jellybean Roms . Thanks again for you helpfulness and time.
Chrisdzie
For ICS based ROMs to work you first need to install ICS.That explains the bootloop. Normally you can't jump from GB to an ICS ROM. The guide shows you how to do that. Then you can choose XBSA ROM or whatever working one you like.
I have not used CM based ROMs, as 3D has not been made to work in these (there is no official LG JB for this phone yet). So, I am not sure about the install process for those.
Sent from my SubGenius™ LG P925 with XBSA vR3D ROM and Supercharged Slack™
chrisdzie said:
OK thanks for the ics tutorial very helpful. But don't mean to sound like a newbie but how can i solve the problem with my installed custom Roms not working?? Or will this work to with customs jellybean Roms . Thanks again for you helpfulness and time.
Chrisdzie
Click to expand...
Click to collapse
There's no shame of being a newbie everyone was once a newbie before they become masters.
Well before I have installed jellybam v 7.8.0 which is a jellybean based Rom. Loved the options and worked fine, but after a day or two my internal storage became full and phone freezed up and unresponsive. Did research and found out that it was a bug. I installed that through official GB Rom. So I went back,then tried to install miui v5 and then walkman but they have the same shutdown and sim not detected issues. People with those Roms installed don't seem to have those issues. So you can see where I am confused. Thanks
Chrisdzie
Sent from my LG-P920 using xda app-developers app
I have read something about installing a different CM version but I am not sure what or how.
If you don't mind can you post a link for me. Because these issues are bothering me. Thank for your time.
Chrisdzie
Sent from my LG-P920 using xda app-developers app
Maybe here
http://forum.xda-developers.com/showthread.php?p=38428702
but I really don't know.
drastic00 said:
Maybe here
http://forum.xda-developers.com/showthread.php?p=38428702
but I really don't know.
Click to expand...
Click to collapse
Ok,ok,ok I think I have found the problem but don't know how to fix it... When I install the custom ROM my imei number is blank which is causing me phone to crash. When I revert back to stock ROM my imei number is back and my phone running without any problems.. Is there a fix for this, or did I need to do something with this before installing my custom ROM. (drastic00)- thanks for the link and sorry for the trouble. Thanks everybody that has helped me.
Chrisdzie
Well thanks everybody that had tried to help me but I have sold my p920 and got myself a HTC sensation. I did not like stock ROM on p920 and since custom firmware never worked then there was no use. Again thanks everybody.
Sent from my HTC Sensation using xda app-developers app
Related
ok, so I picked up the Cappy tonight, did alot of reading,
PLEASE NOTE, I have a Rogers Galaxy S Captivate SGH-I896, On Froyo 2.2
I successfully rooted the device with superoneclick,
downloaded Rom Manager, Flashed Clockwork recovery for Galaxy S Captivate
Reboot to recovery, select re-install packages, FAILED Signature...and aborts,
What am I doing wrong here?
Is there a better method? Every guide I read said to do it with rom manager...do I need to flash the stock rogers GB with bootloaders? then retry clockwork again?
/Lost
soooooo.....
you didnt actually SEARCH for the ACTUAL ERROR MESSAGE that you got?
http://forum.xda-developers.com/showthread.php?t=1161102
Rom Manager isn't needed anymore. Not once have I installed Rom Manager on my phone.
This should help you out.
http://forum.xda-developers.com/showthread.php?t=1350266
jonnyg1097 said:
Rom Manager isn't needed anymore. Not once have I installed Rom Manager on my phone.
This should help you out.
http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks thats exactly what i needed, i now have cm7 loaded up.
one question tho, while cm7 would install fine i initially tried to flash the ICS port by teamhacksung and it resulted in a bootloop, is there some step im missing? are someupdates only installable from internal sdcard?
You must be on a mtd based rom, which cm7 is, (touch wiz roms are bml based) before flashing to ics. U should be able to flash ics with no problem now.
mbc663 said:
You must be on a mtd based rom, which cm7 is, (touch wiz roms are bml based) before flashing to ics. U should be able to flash ics with no problem now.
Click to expand...
Click to collapse
ok will give it another shot!
Enjoy, it's quite different
Well, ics successfully flashed this time.
Only difference from my last attempt was I flashed a cm7 nightly instead of stable, also once on cm7 I flashed a newer radio as well as the glitch kernel. Dunno what had affected it before but its now running nicely on ics build 9.
Thanks for the help guys, I guess where I got hung up is where cwm resides in the kernel on this device? Where on all my htc's we simply flash cwm over the stock recovery. Anyways thanks again!
Sent from my HTC Vision using xda premium
ptesmoke said:
Well, ics successfully flashed this time.
Only difference from my last attempt was I flashed a cm7 nightly instead of stable, also once on cm7 I flashed a newer radio as well as the glitch kernel. Dunno what had affected it before but its now running nicely on ics build 9.
Thanks for the help guys, I guess where I got hung up is where cwm resides in the kernel on this device? Where on all my htc's we simply flash cwm over the stock recovery. Anyways thanks again!
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
The glitch kernel is not compatible with ics, as of yet. It was over written when u flashed ics I'm pretty sure.
Well being completly new to this device was a lot of learning, I still have no idea what I did wrong initially to get stuck in bootloops, but I somehow managed to get cm7 working and then up onto ics so all is well as far as I can see now. Its a backup device for us so I'm pretty sure I will only be flashing ics as it matures. Must say the ics on the cappy is pretty far ahead in terms of usability compared to the desire z, great work here from your devs! And thanks for the pointers guys!
Sent from my HTC Vision using xda premium
Good news for SU760.
I have successfully converted the P920 rom to work on my SU760.
Why I did this, since there is already an existing modified rom for SU760? I don't like the korean rom for su760, that's why i converted the rom for p920.
I have tested the XBSA ICS themed rom. It works perfectly, no bugs as of now. I know that this technique will also work with some other roms for p920.
I have to ask permissions first to all the devs for p920 roms if it's ok for them. I will also try to make an update zip for easy converting (hope it will work)
sorry for my bad english.
UPDATE:
I just converted and tested the Promethius Rom V1.5 20F for P920 guess what? IT WORKS.!
Now I'm on testing on other roms for P920.
Another rom works to my SU760.
After converting the Acura 3D Max Rom, it works on my phone just like normal.
On testing with another one.
yeah that great
How do you do it please give some details. When I install P920 roms I get Inernel Memory card mounts issues plus buttons messed up back button works as search. Both of these problems solved with Bluekernel.
But there is one big problem that is camera gets flipped upside down. Please if you have figured out a way to fix it tell us. I'll be really grateful.
Thanks
Great! Bless ya
Hey! Great news dude! So when r u sharing? we are waiting u know
Sorry for the late update of this thread. I have been so very busy on my work. I even forgot to upload the converted roms.
I will try my best to get extra time to upload the roms.
I found a little bug on Promethius Rom V1.5 20F. When I use the USSD Code in dialer, I get force close on com.android.phone and it will also restart the GSM Network. I have a problems looking for the error in logcat. Hope someone could help me diagnose the problem to make it perfect. Thou this is not a big issue for me. i will also test the ussd code on XBSA and on some other roms that I have converted.
About the Official ICS for SU760, I will try to test it on my phone. But first I have to secure an Official gingerbread firmware for SU760 for backup purposes. Hope I can convert SU760 ICS to be use for P920.
Official ICS has bootloader lock so no CWM and no backup.
Sent from my LG-P920 using xda app-developers app
iodak said:
Official ICS has bootloader lock so no CWM and no backup.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
have you tried it.? is it possible to go back to gingerbread after flashing ICS.?
I need official firmware or stock rom V20f for SU760, hope someone could provide a link to download.
There you go..
This is official SU760 V20F Gingerbread
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGSU760/ASKTDB/V20f_00/V20F_00.kdz
here are the converted ROM. --> http://forum.xda-developers.com/showthread.php?t=1871020
To those who bricked their P920, Can you still access CWM.? how about download mode.?
Samno cant get to recovery after flashing gb or froyo. Some user that flashed 20f korean can.
Edit: did you root it.
Sent from my LG-P920 using xda app-developers app
iodak said:
Samno cant get to recovery after flashing gb or froyo. Some user that flashed 20f korean can.
Edit: did you root it.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
is your phone SU760.
yes my phone is rooted and it was V20F
reply
can someone please update this thread,i really really want to flash my su760 on any other su760 version just to root my phone.i almost did all the rooter tools for optimus 3d but none of them works...can anyone help me....?
chicknician said:
can someone please update this thread,i really really want to flash my su760 on any other su760 version just to root my phone.i almost did all the rooter tools for optimus 3d but none of them works...can anyone help me....?
Click to expand...
Click to collapse
what is your problem about SU760.? just try to search the whole forum about optimus 3d, im sure you will find answers to your problem. that's where I start, and I think almost all problems about software in optimus 3d has a fix.
And, Chickinican, if you are on Gingerbread (2.3.x) ROM, your best bet is Megatron block string attack. However, if you are on Ice Cream Sandwich (4.0.x) version, I would dig a bit more since this version is somewhat secure so different exploitation is necessary and required to give you root access.
Sent from my XT907 using xda premium
Dr. Mario said:
And, Chickinican, if you are on Gingerbread (2.3.x) ROM, your best bet is Megatron block string attack. However, if you are on Ice Cream Sandwich (4.0.x) version, I would dig a bit more since this version is somewhat secure so different exploitation is necessary and required to give you root access.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
thanks for the answer...i just root my su760 optimus 3d (version 2.3.6) with megatron root tool as you said.thanks it works..but the problem is when i installed droidvpn and load my tun.ko from tun.ko installer , everytime i open up my droidvpn it keeps my phone reboots. but when i removed the tun.ko from my device.phone doesnt reboot and thats the issue for now tun ko is one of the droidvpn's requirements..someone can help me about this?it will be highly appreciated..
---------- Post added at 07:05 PM ---------- Previous post was at 06:44 PM ----------
just want to update my situation..i tried to flash the latest official firmware(ics 4.0.4) for optimus 3d (su760) using lgmobile support tool. and used root with restore by bin4ry.. thinking that this one will solve my problem.but nothing happen. it still reboots when i open up my droidvpn when the tun ko is loaded..now i downgraded my device with froyo 2.2.2 thinking that this one will help me too.but still the same.. can anyone please send me a link of the best and stable firmware for opdtimus 3d (su760).or any vpn that will make my internet free. ics 4.0.4 and froyo 2.2.2 doesnt have simtoolkit.
hi, i have LG SU760 2.3.6 want to add language (Indonesia), could you help me how to update? i have looking around for the correct firmware, but not sure...
any firmware that match for this phone?
Hi Guys,
I'm currently on 2.3.6 VictoryRom v1.1 which new ROM has ICS and will give me the best performance?
Will it be as simple as installing from .zip using clockwork?
Thanks for the help!
r0nz3y said:
Hi Guys,
I'm currently on 2.3.6 VictoryRom v1.1 which new ROM has ICS and will give me the best performance?
Will it be as simple as installing from .zip using clockwork?
Thanks for the help!
Click to expand...
Click to collapse
To use ICS roms you have to upgrade to ICS first.
As for roms, it's all personal opinion what is best. If HDMI/lapdock support isn't essential for you, I would recommend CM10.
Sent from my MB865 using xda premium
Cm10 roms are not stable.you can update to stock pics and root your phone.then pimp it(using pimpmyrom) free in play store.
Sent from my MB865 using xda app-developers app
sad_but_cool1 said:
Cm10 roms are not stable.you can update to stock pics and root your phone.then pimp it(using pimpmyrom) free in play store.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Uhh..no CM10 is actually really stable. There are a couple really minor bugs left.. but it's Jelly Bean so it's smooth as butter (project butter) and is well worth the tiny bugs.
http://forum.xda-developers.com/showthread.php?t=1869692
yeah, cm10 is very stable.. no random reboots or anything for me.. sure it has a few bugs, but nothing to stop you from using it as your daily driver. Actually what keeps making me go back to cm10 is that its so friggin smooth and ofcourse the little customisations you can do and themes..
For the OP, I dunno much about the GB roms, but id recommend both cm10 and and magicmod with performance and customisations in mind and that they are JB based
If you want full functionality, then all the ICS roms are good, just read thru the threads for the ROMs and devs description and screenshots and try the one according to need.. the latest one is numa and the first one is SCV7 which still is one of the best roms for our phone on ICS. If you ask me, you'll know which one to use only after youve flashed enough
Also remember to read the devs description of the ROM and how to flash properly, cause you need to use different recoveries for different ROMs. So better if you read up as much as you can. Do keep a backup of your stock ICS on ur sdcard, (i have like 3 now stock, cm10, numa) but you know how it goes, since youre already on a ROM..
Mostly youre gonna love your phone more after you get on ICS and flash one of the ICS and JB roms. Happy flashing !
EDIT: i missed it, but better if you post questions in the Q&A thread..
Thanks for the reply. I'll try CM10.
When installing ICS, will all I need to do is install .zip Blur_Version.55.13.25.MB865.ATT.en.US.zip? for ICS leak#1 or will I have to downgrade first?
r0nz3y said:
Hi Guys,
I'm currently on 2.3.6 VictoryRom v1.1 which new ROM has ICS and will give me the best performance?
Will it be as simple as installing from .zip using clockwork?
Thanks for the help!
Click to expand...
Click to collapse
WOW! Thanks for staying on Victory Rom for so long. Just now few min's back (Nov 30 3.05 PM EST ) I sold my Atrix 2. Anyway Thanks.
Googler_1976 said:
WOW! Thanks for staying on Victory Rom for so long. Just now few min's back (Nov 30 3.05 PM EST ) I sold my Atrix 2. Anyway Thanks.
Click to expand...
Click to collapse
Hey - thanks for the great rom, and for letting me "cut my teeth" on it
It's kind of sad to hear you finally sold your A2... but i'm sure we'll still see you around xda..
Take care..
alteredlikeness said:
Hey - thanks for the great rom, and for letting me "cut my teeth" on it
It's kind of sad to hear you finally sold your A2... but i'm sure we'll still see you around xda..
Take care..
Click to expand...
Click to collapse
yes.. I got Optimus G Lets see how it works out. I was actually about to recommend your rom to this guy.. So was checking your both roms. Anyway We will meet again. I was off the development for sometime as I had SGS2 (I9100), It had so many roms that I did nothing. But Now as I'm on LGOG may be I might need to cook. if time permits.
anyway from my side a BIG THANK YOU to you and Jim.. for putting so much work on this tread.
I loved Victory Rom. I'm sad to hear there wont be another one for my A2
CM10 doesn't have a functioning camera? doh
hi guys.
I have problems when installing certain custom ROMS using CWM acording to the Baseband used.
Don't Know why, but when I wanted to install VURRUT KPU again (i had done it several times) Screen keeps on the first image of SAMSUNG SCL I9003 and nothing happens.
I tried to use another custom ROM based on LF2, and when I install it via CWM, it does the same thing, the only difference is that the phone reboots and comes back again to the same SAMSUNG screen.
My phone is galaxy SCL I9003L but i've never had problems installing those ROMs.. It's very strange.
Please if someone could explain me if there is a reason why it's happening this, tell me, i'm a bit scared, using Stock FROYO I9003LUBKB1.
Thanks
Because your'e still in FROYO. Upgrade it first to gingerbread. See my post. General Guide for noobies.
marshygeek said:
Because your'e still in FROYO. Upgrade it first to gingerbread. See my post. General Guide for noobies.
Click to expand...
Click to collapse
i've been in froyo, GB , ICS and JB.. i know how to flash roms and pass from one to other..
But my problem is when I try to Install VURRUT KPU or MASTER ROM LF2..
I had used VURRUT's before with no problems, but not now, and that is my problem.. I don't know why
acu.tm said:
i've been in froyo, GB , ICS and JB.. i know how to flash roms and pass from one to other..
But my problem is when I try to Install VURRUT KPU or MASTER ROM LF2..
I had used VURRUT's before with no problems, but not now, and that is my problem.. I don't know why
Click to expand...
Click to collapse
Oh so ur phone is i9003L!
I think u can try the qwerty Rom, as far as I remember once LoSco (rom dev) told that his rom can also be used for Argentine version of SL i.e; Galaxy SL i9003L.
To confirm, just ask in that thread once then go for flashing it if he says yes.
Hope this helps u.
Sent from my GT-I9003.
Try to do the kpe-pit procedure and clean install vurruts rom
Sent from my GT-I9003 using xda app-developers app
So my friend has p920 and until now its was ok but now it has started to extremely lag and we decided to root it and put a custom rom on it... Im dont know much about this phone because Im using HTC buzz and Ville C2.... also its draining battery like crazy and randomly using mobile internet(like 300mb in hour). Hes running fully stock
1st:
What program should i use to unlock/root it?
2nd:
Which recovery should i use?
3rd:
What jellybean rom do you suggest using?
Mixz1890 said:
So my friend has p920 and until now its was ok but now it has started to extremely lag and we decided to root it and put a custom rom on it... Im dont know much about this phone because Im using HTC buzz and Ville C2.... also its draining battery like crazy and randomly using mobile internet(like 300mb in hour). Hes running fully stock
1st:
What program should i use to unlock/root it?
2nd:
Which recovery should i use?
3rd:
What jellybean rom do you suggest using?
Click to expand...
Click to collapse
look this http://forum.xda-developers.com/showthread.php?t=2337545
some Features not work in jellybean like 3D
pacman rom
GrMo Hady said:
look this http://forum.xda-developers.com/showthread.php?t=2337545
some Features not work in jellybean like 3D
pacman rom
Click to expand...
Click to collapse
Thx for fast reply, And he hates the 3D function(that was a gift for him....) so that wont be a problem but ill look what bugs it has anyway...
GrMo Hady said:
look this http://forum.xda-developers.com/showthread.php?t=2337545
some Features not work in jellybean like 3D
pacman rom
Click to expand...
Click to collapse
Can I this instead of step 2 in that guide? http://forum.xda-developers.com/showthread.php?t=2366916