Related
Hello
Got my 32gig card yesterday.
Formatted it on my PC took my 8gig out of my sensation but it in to my PC , copied all files to PC then put all the files on to my 32gb card put in the phone and hey no files?????.
I then formatted the card with my sensation and put the 32gb card back to the computer loaded the files and hey again.....no files.
Anybody got any ideas about what could be wrong?
confrontation said:
Hello
Got my 32gig card yesterday.
Formatted it on my PC took my 8gig out of my sensation but it in to my PC , copied all files to PC then put all the files on to my 32gb card put in the phone and hey no files?????.
I then formatted the card with my sensation and put the 32gb card back to the computer loaded the files and hey again.....no files.
Anybody got any ideas about what could be wrong?
Click to expand...
Click to collapse
Are you formatting the sd card as fat32? by default windows will pick NTFS.. worth a look. The phone needs Fat32.
What type of MicroSD card is it?
And where did you get it from?
Is there any possibility it could be a fake? So actually a low capacity card like 2GB (or lower) pretending to be 32GB?
I used to have a program which would write to every sector on the card and prove it's actual size, very handy for checking cards from ebay, but I can't for the life of me remember what it's called!
Make sure you are not quick-formatting the card and that you have set FAT32 as the file system
If you can copy files to the card on a computer and then use them, the card is ok. Maybe try the files on a second computer to double-check.
You can also try filling up the card with data... I once bought a 4GB card and only 2GB were working :|
h2testw_1.4 easy to find on the web to test real capacity.
Liv314 said:
h2testw_1.4 easy to find on the web to test real capacity.
Click to expand...
Click to collapse
That was it!
Cheers for the info
You're welcome Android friend
having the same issues with my 32gig kingston class4... Actually i've tried to format it as fat32 and it worked.. Ive put the card on my sensation and recognized it quiet well. After using it for several days w/o an issue suddently i ran out of battery and when I charged my phone and tried to access my files... Pooff they were all gone ! The phone was saying mount an sd card ! Any ideas ? Thank you..
nothingelse1989 said:
having the same issues with my 32gig kingston class4... Actually i've tried to format it as fat32 and it worked.. Ive put the card on my sensation and recognized it quiet well. After using it for several days w/o an issue suddently i ran out of battery and when I charged my phone and tried to access my files... Pooff they were all gone ! The phone was saying mount an sd card ! Any ideas ? Thank you..
Click to expand...
Click to collapse
Just open the case, remove the SD and insert the SD back. Wait for a few moments and u will have the files back
Sent from my HTC Sensation Z710e using XDA App
i just my 64gb sandisk micro sd card and is having a hard time formatting it.. Whats weird popped it in the phone it recognized it but when i put it in my pic(vista) it doesnt and tells me i have to format it.. So, I put the card in my rezound popped it back out and then put it on a pc running windows 7 it recognizes it..What the hell is going on? I really need some help. I tried EaseUs program but it doesnt recognize the card..
Card
antawnm26 said:
i just my 64gb sandisk micro sd card and is having a hard time formatting it.. Whats weird popped it in the phone it recognized it but when i put it in my pic(vista) it doesnt and tells me i have to format it.. So, I put the card in my rezound popped it back out and then put it on a pc running windows 7 it recognizes it..What the hell is going on? I really need some help. I tried EaseUs program but it doesnt recognize the card..
Click to expand...
Click to collapse
The file format in order for the Samsung to read it must be Fat32, it's not the most efficient file partition setup, however Samsung does not read anything other than that right now, the card is probably formatted in some other type of format like NTFS. Search on the Samsung S3, using "Format SD Card", or something with SD Format in the search and you will find there are a bunch of apps for formatting the card for the Samsung.
Hope this helps
therobzilla said:
The file format in order for the Samsung to read it must be Fat32, it's not the most efficient file partition setup, however Samsung does not read anything other than that right now,
Click to expand...
Click to collapse
Completely untrue (it has to be FAT32 for CWM to read it, but not for the phone).
I porposefully DO NOT format my 64 gig cards to FAT32 as I have movie rips that are over 4 gigs & FAT32 will not allow over a 4 gig file size.
I have two 64 gig cards & both work fine just as they came out of the box.
jmorton10 said:
Completely untrue (it has to be FAT32 for CWM to read it, but not for the phone).
I porposefully DO NOT format my 64 gig cards to FAT32 as I have movie rips that are over 4 gigs & FAT32 will not allow over a 4 gig file size.
I have two 64 gig cards & both work fine just as they came out of the box.
Click to expand...
Click to collapse
so, why isnt vista recognizing my card? I also just noticed something as well..vista has started seeing the card but under computer settings it says ricoh sd device, but my other micro sd cards says secure digital storage device. I may have messed this card up popping it in and out of every device i could find..lol
update: I put it in my rezound and wiped the micro sdcard and i think thats why its saying ricoh storage device instead of secured digital storage device..If so will it harm or diminish the performance of the card?
here is how your format the ultra 64gb sdxc to fat32
http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm
droidstyle said:
here is how your format the ultra 64gb sdxc to fat32
http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm
Click to expand...
Click to collapse
how much of my space will i keep? Thanks for the help
antawnm26 said:
so, why isnt vista recognizing my card? I also just noticed something as well..vista has started seeing the card but under computer settings it says ricoh sd device, but my other micro sd cards says secure digital storage device. I may have messed this card up popping it in and out of every device i could find..lol
update: I put it in my rezound and wiped the micro sdcard and i think thats why its saying ricoh storage device instead of secured digital storage device..If so will it harm or diminish the performance of the card?
Click to expand...
Click to collapse
jmorton10 said:
Completely untrue (it has to be FAT32 for CWM to read it, but not for the phone).
I porposefully DO NOT format my 64 gig cards to FAT32 as I have movie rips that are over 4 gigs & FAT32 will not allow over a 4 gig file size.
I have two 64 gig cards & both work fine just as they came out of the box.
Click to expand...
Click to collapse
My apologies, I thought that what the file format needed to by, but you are correct CWM can't read the Fat32 format in recover.
Sorry for the misinformaion.
antawnm26 said:
how much of my space will i keep? Thanks for the help
Click to expand...
Click to collapse
59.45gb free
sending card back to best buy and getting a new one and will start over.. My phone kept saying blank sd card....i had two partitions on it and was trying to rid of it and messed up somewhere down the line...Everyone makes its sound simple as putting it in your phone and letting it format it to fat32, but im sure the galaxy is putting it to extfat.. I will do some more studying on it...
droidstyle said:
here is how your format the ultra 64gb sdxc to fat32
http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm
Click to expand...
Click to collapse
when i put the card in the program read E:29gb..does that mean it will only give me 29gb of the 59.495gb ?
antawnm26 said:
sending card back to best buy and getting a new one and will start over.. My phone kept saying blank sd card....i had two partitions on it and was trying to rid of it and messed up somewhere down the line...Everyone makes its sound simple as putting it in your phone and letting it format it to fat32, but im sure the galaxy is putting it to extfat.. I will do some more studying on it...
Click to expand...
Click to collapse
Don't worry dude. I got a bad one myself. Got halfway through transferring all my data and then the card stopped transferring and hasn't worked since. Tried to nuke and boot it, HP format tool, fedora Linux, two different phones and nothing.
I just called and they are shipping me a new one. Since it will be a couple days I might mess with this one just hoping.
Edit: Something that shouldn't have changed anything. I put it in my htc rezound with amon ra, did usb toggle mode, and formatted, and it worked fine....stupid!
Sent from my SCH-I535 using xda app-developers app
Alright, my new card is in and ready to give it another shot. I'm running windows vista. I was told to try:http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm....When i insert my card it says 29, does that mean that it will only do 29gb? I hear people saying that they just pop the card in their phones and it formats it that way. Is that format exfat?
antawnm26 said:
when i put the card in the program read E:29gb..does that mean it will only give me 29gb of the 59.495gb ?
Click to expand...
Click to collapse
No its 59.45gb free after format.
---------- Post added at 09:29 AM ---------- Previous post was at 09:28 AM ----------
antawnm26 said:
Alright, my new card is in and ready to give it another shot. I'm running windows vista. I was told to try:http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm....When i insert my card it says 29, does that mean that it will only do 29gb? I hear people saying that they just pop the card in their phones and it formats it that way. Is that format exfat?
Click to expand...
Click to collapse
exfat is not compatible with cwm recovery...if you plan on running any rom other than stock, you will need to format as fat32.
Cool, thanks... I just want to make sure as to what im seeing when i pop the card in and hit format. the program is showing E:29, what exactly does that mean? It doesnt give me an option to go any higher
The phone formats the card as "basic hierarchical." not sure if it can be used with cwm
Sent from my SCH-I535 using xda app-developers app
Vorfidus said:
The phone formats the card as "basic hierarchical." not sure if it can be used with cwm
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I was told to use this program to get it to fat32::http://www.ridgecrop.demon.co.uk/ind...at.htm, but then question that hasnt been answered is when i pop the card in the program says: E:29, does that mean it will only convert 29gb of my 64gb.It doesnt give me an option to go any higher
Yes, that's what it means. Download EaseUS partition manager. Format the card with that. The guiformat program didn't work for me, kept coming up as sd card damaged.
Sent from my SCH-I535 using xda app-developers app
antawnm26 said:
I was told to use this program to get it to fat32::http://www.ridgecrop.demon.co.uk/ind...at.htm, but then question that hasnt been answered is when i pop the card in the program says: E:29, does that mean it will only convert 29gb of my 64gb.It doesnt give me an option to go any higher
Click to expand...
Click to collapse
try formatting it in windows, then open ridgecrop program and see if you still get the e29?
droidstyle said:
try formatting it in windows, then open ridgecrop program and see if you still get the e29?
Click to expand...
Click to collapse
I think It may be PC related..
1. formatted it in phone which gave me 59.4gb
2. put in my gf laptop which has windows 7, then downloaded easeus and formatted the 59.4gb it gave me to fat32
3. put the card in my laptop which has vista and it asked me to format it before use(but i didnt)
4. put it in my galaxy s3 rebooted to recovery twrp and it recognize the card...
So would you say its pc related?
antawnm26 said:
I think It may be PC related..
1. formatted it in phone which gave me 59.4gb
2. put in my gf laptop which has windows 7, then downloaded easeus and formatted the 59.4gb it gave me to fat32
3. put the card in my laptop which has vista and it asked me to format it before use(but i didnt)
4. put it in my galaxy s3 rebooted to recovery twrp and it recognize the card...
So would you say its pc related?
Click to expand...
Click to collapse
Yep sounds like another reason why i hate vista lol.
So I've been looking around for help on this across various sites and I've had no luck fixing my problem.
I'm running the most recent CM10 nightlies, which I read might influence which formats the phone can read, and even after I formatted the card to FAT32 via the gui app and easeUS partition editor my phone still says my card is damaged. When I try to format it it just says "unmounting card" with the spinning circle and sits there, never unmounting and formatting like it wants to. I tried to mount/unmount and format in CWM, no dice. This card is brand new out of the package today so there's been no previous use or problems.
Am I just going to be unable to use this card while running CM10, would I have to go back to a TW ROM or stock to make it read correctly? It will show up on my computer when I plug it in and files transfer to it fine so I figure it's a problem on the phone's side. My old 16gb card from my DX works fine and that's what I'll use in the meantime but the space is dangerously low, hence why I jumped on this 64gb card when it was an Amazon deal.
If anyone has some insight or experience with this I'd really appreciate it, I'm guessing it's a problem with CM10 or I missed some tiny step somewhere but I've tried a lot and had no success.
weavethesource said:
So I've been looking around for help on this across various sites and I've had no luck fixing my problem.
I'm running the most recent CM10 nightlies, which I read might influence which formats the phone can read, and even after I formatted the card to FAT32 via the gui app and easeUS partition editor my phone still says my card is damaged. When I try to format it it just says "unmounting card" with the spinning circle and sits there, never unmounting and formatting like it wants to. I tried to mount/unmount and format in CWM, no dice. This card is brand new out of the package today so there's been no previous use or problems.
Am I just going to be unable to use this card while running CM10, would I have to go back to a TW ROM or stock to make it read correctly? It will show up on my computer when I plug it in and files transfer to it fine so I figure it's a problem on the phone's side. My old 16gb card from my DX works fine and that's what I'll use in the meantime but the space is dangerously low, hence why I jumped on this 64gb card when it was an Amazon deal.
If anyone has some insight or experience with this I'd really appreciate it, I'm guessing it's a problem with CM10 or I missed some tiny step somewhere but I've tried a lot and had no success.
Click to expand...
Click to collapse
What exactly is the partition editor you used, and why? The GUI program to format it to fat32 is sufficient...
I would guess either it's the card(what brand btw?) or the partition editor.
Brian Gove said:
What exactly is the partition editor you used, and why? The GUI program to format it to fat32 is sufficient...
I would guess either it's the card(what brand btw?) or the partition editor.
Click to expand...
Click to collapse
It's the "SanDisk Ultra 64 GB microSDXC Class 10 UHS-1 Memory Card 30MB/s with Adapter SDSDQUA-064G-U46A", I've noticed a lot of GS3 owners have been buying something similar or the same.
I used EaseUS Partition Master as well as the fat32 gui program that's been circulating, sounds like you know the one, and while the format was successful the phone still sees the card as damaged and won't completely unmount the card when I try to format it like it says.
You try formatting it on a windows computer
Sent from my SCH-I535 using xda app-developers app
Jarredw said:
You try formatting it on a windows computer
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah I'm using Windows 7
weavethesource said:
Yeah I'm using Windows 7
Click to expand...
Click to collapse
use this program linked below for formatting to
fat32.
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
weavethesource said:
It's the "SanDisk Ultra 64 GB microSDXC Class 10 UHS-1 Memory Card 30MB/s with Adapter SDSDQUA-064G-U46A", I've noticed a lot of GS3 owners have been buying something similar or the same.
I used EaseUS Partition Master as well as the fat32 gui program that's been circulating, sounds like you know the one, and while the format was successful the phone still sees the card as damaged and won't completely unmount the card when I try to format it like it says.
Click to expand...
Click to collapse
That's there exact same card I got. Format it again with the gui but DON'T use the partition program. I guarantee that's what is messing you up.
Brian Gove said:
That's there exact same card I got. Format it again with the gui but DON'T use the partition program. I guarantee that's what is messing you up.
Click to expand...
Click to collapse
Did you use the sd adapter to plug into the computer or you did it while it was inserted in the phone already? I did the latter, idk if buying an sd slot to usb would change anything.
I am having the same problem. I thought I had a bad card, so I sent it back. Now I am searching for a solution as well. I will give this a try later tonight.
weavethesource said:
Did you use the sd adapter to plug into the computer or you did it while it was inserted in the phone already? I did the latter, idk if buying an sd slot to usb would change anything.
Click to expand...
Click to collapse
I used the adapter and put it directly in my computer to format it.
Brian Gove said:
I used the adapter and put it directly in my computer to format it.
Click to expand...
Click to collapse
Ah ok, looks like I'll have to buy an sd-usb plugin then.
Had the same issue on two different cards and eventually they said that they were an unsupported raw format. Called sandisk and they said there are a lot of issues with the 64gb class 10 cards and the SGSIII. I am on my third one. This one has been working almost perfectly. I often get a unmounting remounting issue with the card, but I am not blaming the card yet as ever since I flashed the cracked aboot I have been having odd issues. I am going to put my phone back to stock and start over here today or tomorrow.
Sent from my SCH-I535 using xda app-developers app
I fixed it
I bought a multi-SD plug-in with USB, slid my card in there, ran the gui on the card, put the card back in my phone and it worked fine, the phone recognizes it. For whatever reason the card didn't want to format while it was in the phone despite my manipulations, so plugging the SD into the computer is crucial I think.
Thanks for the support guys.
I have done everything described here, and still have what the OP says. Card is not recognized, like its not even plugged in to the phone, is formatted as FAT32 and works in windows.
sparkerjc said:
I have done everything described here, and still have what the OP says. Card is not recognized, like its not even plugged in to the phone, is formatted as FAT32 and works in windows.
Click to expand...
Click to collapse
Well, I literally fought this for 3 hours, and finally I just deleted the entire partition and formatted the card in the stock ROM. Then I pulled the card and formatted with EaseUS partitioner as FAT32 and put it back in and it worked. Then I flashed back to CM10 and it still works.
How frustrating this is....
I have an 8GB micor Sd card. In a card reader on my computer it is not recognized. In android devices it is recognized, but says that there is an error. Formatting does not fix the issue, and the phone will not mount it. Any thoughts?
Did you already tried another computer ? There may be a driver issue.
You could go to the website or your brand computer and download the newest drivers (Chipset)
There are some possible reasons
<OL>
<li>drivers for sd card host adapters not installed</li>
<li>sd card or sdcard mounter on phone/pc is broken</li>
</OL>
Best solution: buy a new sd card...there may be several detailed methods to fix this too
Hit thnx pls
Sent from my GT-S5282 using xda app-developers app
Not the drivers, other sd cards work fine. Not the phone, my 32gb micro works fine in that. So, I mean, thanks guys. But, I have tried all of those.
It seems that my SD card is not writable when inserted. Is this true? I tried to create a new folder on it with root explorer (I am not rooted though) and it said that my device needs to be rooted in order to accomplish that task.
Any ideas?
Jonn
Did you try something like es file explorer? I would try that.
That didn't work either. It says "operation failed".
I actually noticed that it wasn't working playing act raiser and it wasn't saving my position. Moving the ROM to internal storage worked. I then tried to create a folder.
Sent from my Nexus 7 using Tapatalk 2
Huh. Just tried a different SD card and that one worked. Weird.
Sent from my Nexus 7 using Tapatalk 2
I spoke too soon. After removing the sdcard that worked and putting it back in, it no longer is writeable.
Sent from my Nexus 7 using Tapatalk 2
It works again if I pull the card out, restart the shield and put the card back in. Perhaps something up with the mounting process?
It appears that once a card is mounted, if it is removed and re-inserted, it remounts as read only.
Jonn
Sent from my Nexus 7 using Tapatalk 2
It looks like sdcard mounting is messed up. I can't get any of the sdcards i have tried to mount.
Did you go into settings and actually click unmount before removing the SD Card? Many linux systems (android is linux) will mount devices which werent safely removed in read only mode for some bizarre reason.
I tried that as well. It still doesn't work.
Sent from my Nexus 7 using Tapatalk 2
jonnberg said:
It seems that my SD card is not writable when inserted. Is this true? I tried to create a new folder on it with root explorer (I am not rooted though) and it said that my device needs to be rooted in order to accomplish that task.
Any ideas?
Jonn
Click to expand...
Click to collapse
when you go to storage under settings, under sd card does it show total space for card. if not maybe you have to format it to NTFS first. thats what I had to do with my new card. also said to do so on shield guide
evobunny said:
when you go to storage under settings, under sd card does it show total space for card. if not maybe you have to format it to NTFS first. thats what I had to do with my new card. also said to do so on shield guide
Click to expand...
Click to collapse
I did not read the destructions. The destructions have useful information? Where may i find these destructions? I assumed fat32 so that is what my sd is formatted to.
chevyowner said:
I did not read the destructions. The destructions have useful information? Where may i find these destructions? I assumed fat32 so that is what my sd is formatted to.
Click to expand...
Click to collapse
sorry i cant post link yet cause im new to forum. but go there, (shield.nvidia.com/user-guide/sd-card) user guide said to format it to NTFS
Would has added this sooner, but I lost my sdcard reader.
Formatting it NTFS worked.
Still wont mount, but now i at least get the option to mount.
evobunny said:
when you go to storage under settings, under sd card does it show total space for card. if not maybe you have to format it to NTFS first. thats what I had to do with my new card. also said to do so on shield guide
Click to expand...
Click to collapse
Yes, I formatted it to NTFS before I inserted it. It shows the total space and space available, it just doesn't allow anything to be written to it. I can take it out and put it in a PC and it works correctly. I also have another SD card that I tried and it worked for a few minutes, but I haven't been able to get it to keep working.
Jonn
jonnberg said:
Yes, I formatted it to NTFS before I inserted it. It shows the total space and space available, it just doesn't allow anything to be written to it. I can take it out and put it in a PC and it works correctly. I also have another SD card that I tried and it worked for a few minutes, but I haven't been able to get it to keep working.
Jonn
Click to expand...
Click to collapse
sorry I dont know what else to tell you, i first had the same problem like yall when I stuck in a brand new card. nothing I downloaded would go on to card. and it didnt show the amount of space left under the storage menu. Then i found out it need to be formated to NTFS. Once i did that everything started downloaded and showing up on card.
jonnberg said:
Yes, I formatted it to NTFS before I inserted it. It shows the total space and space available, it just doesn't allow anything to be written to it. I can take it out and put it in a PC and it works correctly. I also have another SD card that I tried and it worked for a few minutes, but I haven't been able to get it to keep working.
Jonn
Click to expand...
Click to collapse
The only memory card I have gotten working (about 1 minute ago) is 512MB and formatted fat32
The card i want to us is a 16gb microsdhc formatted fat32 when this memory card is in my shield it knows it has a memory card but says it has no partitions on it.
I am running testdisk on the sd card and it found 9 partitoins. I will try and clean that up.
To be honest, I've never tried SD card support on the device. So I can't say one way or another. But I'll be looking at it soon enough since I got my first build of CWM for SHIELD waiting for me to debug in the other room once the kids go to bed.
I just tried two different 8GB class 10 transcend cards, an 8GB class 2 generic card and a 256mb sandisk card. I put each card in and copied a file from internal storage to it. Then I removed each of the cards without unmounting and put them back in and proceeded to copy a file to the card again. Every time it worked successfully. I do not even know what format they are in and didn't format them before testing. And, maybe the issue didn't show up because I didn't give it enough time. I am not sure.
Also, I know this is probably a really dumb question but the micro sd slot is spring loaded. You are pushing it in until you hear a good solid click right?
issues
Having issues of my own.
Bought a 64gb sandisk SDXC card for shield. It worked 100% fine in my SGS3 formated for exFat. But not in the shield...
It seems to work somewhat when formated for NTFS. But the file path is really messed up and 1/2 my apps cant see the SD card because of this. It something like (root/storage/sdcard1/....)
2 apps that are basically usless right now due to this are Power amp & FPse.
Android doesn't normally support either exFat or NTFS. The shield may include support for them but if I had a shield I would steer clear anyway and go with what android definitely trusts in FAT32.
Hopefully NVidia will do a firmware update to sort these problems though