[Q] Using Verizon 10.1 on AT&T - Galaxy Note 10.1 Q&A, Help & Troubleshooting

I followed Adam's jailbreak method using Casual and all went well. At this point I cannot get my AT&T SIM to be recognized or to work. It connects to the network, but I have no data connection and the tablet shows "unrecognized SIM". Did I miss a step?

jneusch said:
I followed Adam's jailbreak method using Casual and all went well. At this point I cannot get my AT&T SIM to be recognized or to work. It connects to the network, but I have no data connection and the tablet shows "unrecognized SIM". Did I miss a step?
Click to expand...
Click to collapse
You need to add att apn to /etc/apns-config.xml. I used root explorer to transfer the file to sdcard and then used pc to add att apns. Once you've add it and transfer it back to the device, make sure its on att-us and not att-broadband if you're using the phone sim, but if you have ipad data only sim then you should use att-broadband.
Ps I would show you steps, but i am busy atm and its better if you research around.
Good luck

Lymon23 said:
You need to add att apn to /etc/apns-config.xml. I used root explorer to transfer the file to sdcard and then used pc to add att apns. Once you've add it and transfer it back to the device, make sure its on att-us and not att-broadband if you're using the phone sim, but if you have ipad data only sim then you should use att-broadband.
Ps I would show you steps, but i am busy atm and its better if you research around.
Good luck
Click to expand...
Click to collapse
Thanks! Now that I have the missing element I was able to find the APNs, copy the file and it is working.

Requesting for step
Please kindly post the steps for us. Thanks

Related

[Q] usb tethering

I have android wifi tether installed and running, so I know I'm rooted. Although the wireless works great on my laptop...my main pc runs Ubuntu with no way to receive.
I was wondering if there is a way to tether the same connection via USB....just as free, and easy. Thanks.
Yes, if you se the TBH NVRAM method with RadioComm to change the tethered NAI strings you can USB tether in Linux with no problems.
http://www.mydroidworld.com/forums/android-hacks/5156-tbh-droid-3g-hotspot-nvram-hack.html
There are screenshots later in that thread and discussion about the RadioComm method with the D2G or Pro using the MDM6600 chipset MA either manually or using the NVM table posted there.
User name is [email protected] and Password is vzw and number to dial is #777.
cellzealot said:
Yes, if you se the TBH NVRAM method with RadioComm to change the tethered NAI strings you can USB tether in Linux with no problems.
http://www.mydroidworld.com/forums/android-hacks/5156-tbh-droid-3g-hotspot-nvram-hack.html
There are screenshots later in that thread and discussion about the RadioComm method with the D2G or Pro using the MDM6600 chipset MA either manually or using the NVM table posted there.
User name is [email protected] and Password is vzw and number to dial is #777.
Click to expand...
Click to collapse
I did quite a bit of reading but I'm still slightly confused. I've got both the patch and unpatch zip files downloaded. I'm already rooted with gummyjar flashed, so using bootstrap and getting the zip files installed shouldn't be a problem.
What I'm not clear on is after I install the patch and reboot...what am I looking for? An actual app? More configuration? Just plug in to pc? I'm also not sure where this login information comes in. I'm somewhat new to any modding so many thanks.
You can't use the tether patch zip files on D2G. You have to use the RadioComm method I referred to later in the thread.

[Q] HTC Connection Setup Database

My phone is refusing to run HTC connection Setup.
Exists right away with an error: "No Database available on device"
The phone is unlocked so I have access to the file system.
Is it possible for someone to upload the DB file? Im trying my best to get this working.
Thank you.
jsv_90 said:
My phone is refusing to run HTC connection Setup.
Exists right away with an error: "No Database available on device"
The phone is unlocked so I have access to the file system.
Is it possible for someone to upload the DB file? Im trying my best to get this working.
Thank you.
Click to expand...
Click to collapse
Are you using an HTC that came with the connection setup app?
I am using a HTC trophy.
As soon as I load the app the error appears.
I was thinking the app is looking for a db file that should be on the phone somewhere.
Any ideas?
Find a solution for this? I have a Mazaa (MS Dev Phone) and I'm trying to get it to use Verizon. TMobile SIM cards work, but even with the SIM card installed I get the same error you get.
Did your trophy work before a custom rom or something?
I'm assuming the phone is missing some of the stuff Verizon would have pre-installed. Is there a way to view the contents of a custom ROM from a pre-configured Trophy?
same boat mate. maaza can't provision. :S

[Q] CDMA Workshop or the like to make alterations for Nexus S 4G?

Does cdma workshop work with the nexus s? nexus s 4g? looking to get in there and alter what I can...hopefully the eri banner. thank you!!
edit: any other way to get in there would be good too. looking to change the sci, accolc, eri, etc, etc. thanks!
I am looking for the same thing.
If I can get the phone into diag mode, I should be able to get it working.
I am having trouble figuring out how to enter the diag mode.
The normal methods (##Code) doesn't work.
I played with CDMA Workshop earlier after installing EPST and have it not working. It looks like it would need a modified dongle to get the Nexus to enter DL or modem mode as the ## codes don't work. Using all other modes I can't seem to get the program to recognize I have the phone plugged in. I could be missing something but have yet to find anything relevant as a CDMA Nexus is the new crittter on the block.
Update on my previous post, to get the NS4G into D/L mode you hold both volume keys down while pressing the power on button for just a second. Now I just need to find the drivers for this mode.
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
tanman21 said:
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
Click to expand...
Click to collapse
unfortunately, i need the samsung drivers seeing as how my mobile is my web connect.
anyone have the drivers to install??
edit: got it...somehow I found the drivers and got them installed...
tanman21 said:
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
Click to expand...
Click to collapse
got it!
i can view everything in cdma workshop. but when i click 'write', it tells me phone is asking for spc(6 digits). i assume this is my msl which i havent gotten yet for this device...
where do i enter the spc so that i can write changes? thank you!!!
edit: got my msl but i dont think its helping here...my main goal is to alter the sci, which i cant do without cdma workshop, yet. id also like to change the banner but nothing seems to be sticking. thanks for the help!
gotta change the banner, sci...
Last day of classes seems like a good time to tackle this issue.
Gonna continue tinkering around...hopefully we can change the SCI and eri banner(want mine to read 'Google' or 'Nexus S 4G').
Any help would be much appreciated and yield you a wookie life debt. Thank you!!!
Still messing around and I cant seem to find a way to make these alterations. Anyone else have any better luck? Skills?
Thanks!!!
Thanks for the dialer code .. much quicker than decompiling the apk.
I saw references to MSL in this thread and google brought it up as the first result for the ns4g, but no mention of how to obtain it.
For those wondering, getprop | grep MSL will show the MSL. If you don't have busybox installed (for grep), just type getprop after you after root in adb shell or terminal emulator/connectbot and scroll through the list of output, MLS will be in there.
Hope this helps save some time for people! Thanks Samsung and Google for keeping it simple! Thanks for this helpful thread!
when i change them both to modem nothing happens, what do di do when i change them.
with my unrooted s4g, i can access the info in cdma tools. i can connect, read the settings...when i attempt to write changes, sometimes it tells me the phone is requesting the spc. other times it will write certain things and fail writing others..regardless, nothing sticks. frustrating...hopefully i can hold off on rooting again until the 3d comes out...gotta be a way to make it happen without rooting(wishful) or editing eri.xml but if this the only way to make changes to sci, banner, etc; im gonna have to wait until i play with the evo3d...really dont wanna wipe data again
WITH BOTH QPST AND CDMA WORKSHOP, I AM ABLE TO READ THE PHONES SETTINGS BUT I CANT WRITE TO IT. woops, sorry bout the caps.
anyway, when i click write, some things write and others dont. then when i click read, the banner is recognized as google even though it reads sprint on my phone still. often time when i click write in cdma workshop, it tells me phone is requesting spc, spc is required.
update: it seems that the sci and access overload class have stuck to the values that i chose. however, the main goal for me is to alter the banner to read 'Google'.
any input is much appreciated. thank you!
By any chance, are there any tutorials or has anybody successful flashed a Hybrid PRL USING cdma workshop??
Samsung phones such as the Moment and Epic 4g need 'default password' sent to unlock the nvitems to be writeable. Has anyone thought of this or tried this? Maybe the Epic 4g password works?
USB Device Not recognized
Guys i need help i tried everything already!!! My nexus s when i connect the phone to the computer does recognized everything except when i tried to go on modem mode. Do u guys have any clue how to fix this?????
I've been able to flash prl with qpst.
I'm not certain why qpst or the like wouldn't recognize your device.
Sent from my Nexus S 4G via XDA Premium
USB Device Not recognized
it's not the program that is not recognized the phone is my computer that's not recognized my phone on modem mode. i really don't know what's wrong i tried to update the drivers but the computer still no recognizing the phone? what's the procedure that u are taking to get your phone recognized by your computer? (i am using windows xp sp3)
pilussa85 said:
it's not the program that is not recognized the phone is my computer that's not recognized my phone on modem mode. i really don't know what's wrong i tried to update the drivers but the computer still no recognizing the phone? what's the procedure that u are taking to get your phone recognized by your computer? (i am using windows xp sp3)
Click to expand...
Click to collapse
you got the sammy drivers installed? pda net? android usb driver?
yes i did.

[Q] How to make cdma-carriers-conf can be used in the rom?

Hi Guys,
I am using the CDMA android phone and found that the phone is not able to connect the internet via 3G. The problem is that the APN is not set in the phone. However, I have another CDMA phone and there have a files call cdma-carriers-conf.xml under /system/etc. I copy this files to my phone but it seems that it doesn't work. Do anyone know how can I make the system to detect the cdma-carriers-conf.xml rahter than apn-conf.xml?
Thx,
Xcraft

[CLOSED]Network Unlock Pantech Flex and Other Pantech phones for FREE!!!

This has been posted with another program but I could not get that program to work right for some reason. So I found another way to unlock the Flex to any carrier
Download the program, extract the contents to any folder. Run the .exe in the folder you created. Get your IMEI # by opening your phone app and dialaing *#06#. Put this number in the program where it asks for it. It also asks for phone model. Select P9070 then hit calculate. It will give you the PUK code to unlock your phone. Then you insert a non accepted sim card. When it asks for the unlock code, put in the code given to you by the Login Plus program. And voila your Flex is now unlocked to use with any gsm carrier. I unlocked both of parents Pantech P2000 Breeze phones with this as well. So it definitely will work for other Pantech phones too.
ENJOY!!!:laugh:
Link to Unlock Program:
mod edit
Hope this helps someone
Success
It works for my Pantech Flex.
Thank You
The program doesn't even run for me. Any compatibility issues with Win8 perhaps?
Thank you so much for this!
Chadw1985 said:
This has been posted with another program but I could not get that program to work right for some reason. So I found another way to unlock the Flex to any carrier
Download the program, extract the contents to any folder. Run the .exe in the folder you created. Get your IMEI # by opening your phone app and dialaing *#06#. Put this number in the program where it asks for it. It also asks for phone model. Select P9070 then hit calculate. It will give you the PUK code to unlock your phone. Then you insert a non accepted sim card. When it asks for the unlock code, put in the code given to you by the Login Plus program. And voila your Flex is now unlocked to use with any gsm carrier. I unlocked both of parents Pantech P2000 Breeze phones with this as well. So it definitely will work for other Pantech phones too.
ENJOY!!!:laugh:
Hope this helps someone
Click to expand...
Click to collapse
It worked for my parents Pantech P2000 Breeze phones as well. Now to find one that supports the ZTE Z331.

Categories

Resources